1 /* 2 * (C) Copyright 2011 3 * egnite GmbH <info@egnite.de> 4 * 5 * Configuation settings for Ethernut 5 with AT91SAM9XE. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #include <asm/hardware.h> 14 15 16 /* The first stage boot loader expects u-boot running at this address. */ 17 #define CONFIG_SYS_TEXT_BASE 0x27000000 /* 16MB available */ 18 19 /* The first stage boot loader takes care of low level initialization. */ 20 #define CONFIG_SKIP_LOWLEVEL_INIT 21 22 /* Set our official architecture number. */ 23 #define MACH_TYPE_ETHERNUT5 1971 24 #define CONFIG_MACH_TYPE MACH_TYPE_ETHERNUT5 25 26 /* CPU information */ 27 #define CONFIG_DISPLAY_CPUINFO /* Display at console. */ 28 #define CONFIG_ARCH_CPU_INIT 29 30 /* ARM asynchronous clock */ 31 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ 32 #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* 18.432 MHz crystal */ 33 34 /* 32kB internal SRAM */ 35 #define CONFIG_SRAM_BASE 0x00300000 /*AT91SAM9XE_SRAM_BASE */ 36 #define CONFIG_SRAM_SIZE (32 << 10) 37 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SRAM_BASE + CONFIG_SRAM_SIZE - \ 38 GENERATED_GBL_DATA_SIZE) 39 40 /* 128MB SDRAM in 1 bank */ 41 #define CONFIG_NR_DRAM_BANKS 1 42 #define CONFIG_SYS_SDRAM_BASE 0x20000000 43 #define CONFIG_SYS_SDRAM_SIZE (128 << 20) 44 #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_SDRAM_BASE 45 #define CONFIG_LOADADDR CONFIG_SYS_LOAD_ADDR 46 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (1 << 20)) 47 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 48 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE \ 49 - CONFIG_SYS_MALLOC_LEN) 50 51 /* 512kB on-chip NOR flash */ 52 # define CONFIG_SYS_MAX_FLASH_BANKS 1 53 # define CONFIG_SYS_FLASH_BASE 0x00200000 /* AT91SAM9XE_FLASH_BASE */ 54 # define CONFIG_AT91_EFLASH 55 # define CONFIG_SYS_MAX_FLASH_SECT 32 56 # define CONFIG_SYS_FLASH_PROTECTION /* First stage loader in sector 0 */ 57 # define CONFIG_EFLASH_PROTSECTORS 1 58 59 /* 512kB DataFlash at NPCS0 */ 60 #define CONFIG_SYS_MAX_DATAFLASH_BANKS 1 61 #define CONFIG_HAS_DATAFLASH 62 #define CONFIG_ATMEL_DATAFLASH_SPI 63 #define CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 0xC0000000 64 #define DATAFLASH_TCSS (0x1a << 16) 65 #define DATAFLASH_TCHS (0x1 << 24) 66 67 #define CONFIG_ENV_IS_IN_SPI_FLASH 68 #define CONFIG_ENV_OFFSET 0x3DE000 69 #define CONFIG_ENV_SECT_SIZE (132 << 10) 70 #define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 71 #define CONFIG_ENV_ADDR (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 \ 72 + CONFIG_ENV_OFFSET) 73 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_DATAFLASH_LOGIC_ADDR_CS0 \ 74 + 0x042000) 75 76 /* SPI */ 77 #define CONFIG_ATMEL_SPI 78 #define AT91_SPI_CLK 15000000 79 80 /* Serial port */ 81 #define CONFIG_ATMEL_USART 82 #define CONFIG_USART3 /* USART 3 is DBGU */ 83 #define CONFIG_BAUDRATE 115200 84 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 85 #define CONFIG_USART_ID ATMEL_ID_SYS 86 87 /* Misc. hardware drivers */ 88 #define CONFIG_AT91_GPIO 89 90 /* Command line configuration */ 91 #define CONFIG_CMD_JFFS2 92 #define CONFIG_CMD_MII 93 #define CONFIG_CMD_MTDPARTS 94 #define CONFIG_CMD_NAND 95 96 #ifndef MINIMAL_LOADER 97 #define CONFIG_CMD_ASKENV 98 #define CONFIG_CMD_BSP 99 #define CONFIG_CMD_CACHE 100 #define CONFIG_CMD_DATE 101 #define CONFIG_CMD_EXT2 102 #define CONFIG_CMD_FAT 103 #define CONFIG_CMD_MMC 104 #define CONFIG_CMD_REISER 105 #define CONFIG_CMD_SAVES 106 #define CONFIG_CMD_UBI 107 #define CONFIG_CMD_UBIFS 108 #define CONFIG_CMD_UNZIP 109 #endif 110 111 /* NAND flash */ 112 #ifdef CONFIG_CMD_NAND 113 #define CONFIG_SYS_MAX_NAND_DEVICE 1 114 #define CONFIG_SYS_NAND_BASE 0x40000000 115 #define CONFIG_SYS_NAND_DBW_8 116 #define CONFIG_NAND_ATMEL 117 /* our ALE is AD21 */ 118 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 119 /* our CLE is AD22 */ 120 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 121 #define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PC(14) 122 #endif 123 124 /* JFFS2 */ 125 #ifdef CONFIG_CMD_JFFS2 126 #define CONFIG_JFFS2_CMDLINE 127 #define CONFIG_JFFS2_NAND 128 #endif 129 130 /* Ethernet */ 131 #define CONFIG_NET_RETRY_COUNT 20 132 #define CONFIG_MACB 133 #define CONFIG_RMII 134 #define CONFIG_PHY_ID 0 135 #define CONFIG_MACB_SEARCH_PHY 136 137 /* MMC */ 138 #ifdef CONFIG_CMD_MMC 139 #define CONFIG_MMC 140 #define CONFIG_GENERIC_MMC 141 #define CONFIG_GENERIC_ATMEL_MCI 142 #define CONFIG_SYS_MMC_CD_PIN AT91_PIO_PORTC, 8 143 #endif 144 145 /* USB */ 146 #ifdef CONFIG_CMD_USB 147 #define CONFIG_USB_ATMEL 148 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB 149 #define CONFIG_USB_OHCI_NEW 150 #define CONFIG_SYS_USB_OHCI_CPU_INIT 151 #define CONFIG_SYS_USB_OHCI_REGS_BASE 0x00500000 152 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "host" 153 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2 154 #define CONFIG_USB_STORAGE 155 #endif 156 157 /* RTC */ 158 #if defined(CONFIG_CMD_DATE) || defined(CONFIG_CMD_SNTP) 159 #define CONFIG_RTC_PCF8563 160 #define CONFIG_SYS_I2C_RTC_ADDR 0x51 161 #endif 162 163 /* I2C */ 164 #define CONFIG_SYS_MAX_I2C_BUS 1 165 166 #define CONFIG_SYS_I2C 167 #define CONFIG_SYS_I2C_SOFT /* I2C bit-banged */ 168 #define CONFIG_SYS_I2C_SOFT_SPEED 100000 169 #define CONFIG_SYS_I2C_SOFT_SLAVE 0 170 171 #define I2C_SOFT_DECLARATIONS 172 173 #define GPIO_I2C_SCL AT91_PIO_PORTA, 24 174 #define GPIO_I2C_SDA AT91_PIO_PORTA, 23 175 176 #define I2C_INIT { \ 177 at91_set_pio_periph(AT91_PIO_PORTA, 23, 0); \ 178 at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 1); \ 179 at91_set_pio_periph(AT91_PIO_PORTA, 24, 0); \ 180 at91_set_pio_output(AT91_PIO_PORTA, 24, 0); \ 181 at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 1); \ 182 } 183 184 #define I2C_ACTIVE at91_set_pio_output(AT91_PIO_PORTA, 23, 0) 185 #define I2C_TRISTATE at91_set_pio_input(AT91_PIO_PORTA, 23, 0) 186 #define I2C_SCL(bit) at91_set_pio_value(AT91_PIO_PORTA, 24, bit) 187 #define I2C_SDA(bit) at91_set_pio_value(AT91_PIO_PORTA, 23, bit) 188 #define I2C_DELAY udelay(100) 189 #define I2C_READ at91_get_pio_value(AT91_PIO_PORTA, 23) 190 191 /* DHCP/BOOTP options */ 192 #ifdef CONFIG_CMD_DHCP 193 #define CONFIG_BOOTP_BOOTFILESIZE 194 #define CONFIG_BOOTP_BOOTPATH 195 #define CONFIG_BOOTP_GATEWAY 196 #define CONFIG_BOOTP_HOSTNAME 197 #define CONFIG_SYS_AUTOLOAD "n" 198 #endif 199 200 /* File systems */ 201 #define CONFIG_MTD_DEVICE 202 #define CONFIG_MTD_PARTITIONS 203 #if defined(CONFIG_CMD_MTDPARTS) || defined(CONFIG_CMD_NAND) 204 #define MTDIDS_DEFAULT "nand0=atmel_nand" 205 #define MTDPARTS_DEFAULT "mtdparts=atmel_nand:-(root)" 206 #endif 207 #if defined(CONFIG_CMD_REISER) || defined(CONFIG_CMD_EXT2) || \ 208 defined(CONFIG_CMD_USB) || defined(CONFIG_MMC) 209 #define CONFIG_DOS_PARTITION 210 #endif 211 #define CONFIG_LZO 212 #define CONFIG_RBTREE 213 214 /* Boot command */ 215 #define CONFIG_BOOTDELAY 3 216 #define CONFIG_CMDLINE_TAG 217 #define CONFIG_SETUP_MEMORY_TAGS 218 #define CONFIG_INITRD_TAG 219 #define CONFIG_BOOTCOMMAND "cp.b 0xC00C6000 ${loadaddr} 0x294000; bootm" 220 #if defined(CONFIG_CMD_NAND) 221 #define CONFIG_BOOTARGS "console=ttyS0,115200 " \ 222 "root=/dev/mtdblock0 " \ 223 MTDPARTS_DEFAULT \ 224 " rw rootfstype=jffs2" 225 #endif 226 227 /* Misc. u-boot settings */ 228 #define CONFIG_SYS_CBSIZE 256 229 #define CONFIG_SYS_MAXARGS 16 230 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + 16 \ 231 + sizeof(CONFIG_SYS_PROMPT)) 232 #define CONFIG_SYS_LONGHELP 233 #define CONFIG_CMDLINE_EDITING 234 235 #endif 236