1 /* 2 * Copyright (C) 2010 Texas Instruments Incorporated - http://www.ti.com/ 3 * 4 * Based on davinci_dvevm.h. Original Copyrights follow: 5 * 6 * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net> 7 * 8 * SPDX-License-Identifier: GPL-2.0+ 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 /* 15 * Board 16 */ 17 #define CONFIG_DRIVER_TI_EMAC 18 #define CONFIG_USE_SPIFLASH 19 #define CONFIG_SYS_USE_NAND 20 #define CONFIG_DRIVER_TI_EMAC_USE_RMII 21 #define CONFIG_DRIVER_TI_EMAC_RMII_NO_NEGOTIATE 22 #define CONFIG_BOARD_EARLY_INIT_F 23 #define CONFIG_BOARD_LATE_INIT 24 #define CONFIG_VIDEO 25 #define CONFIG_PREBOOT 26 27 28 /* 29 * SoC Configuration 30 */ 31 #define CONFIG_MACH_DAVINCI_DA850_EVM 32 #define CONFIG_SOC_DA8XX /* TI DA8xx SoC */ 33 #define CONFIG_SOC_DA850 /* TI DA850 SoC */ 34 #define CONFIG_SYS_CLK_FREQ clk_get(DAVINCI_ARM_CLKID) 35 #define CONFIG_SYS_OSCIN_FREQ 24000000 36 #define CONFIG_SYS_TIMERBASE DAVINCI_TIMER0_BASE 37 #define CONFIG_SYS_HZ_CLOCK clk_get(DAVINCI_AUXCLK_CLKID) 38 #define CONFIG_SKIP_LOWLEVEL_INIT 39 #define CONFIG_SYS_TEXT_BASE 0xc1080000 40 #define CONFIG_DA8XX_GPIO 41 42 /* 43 * Memory Info 44 */ 45 #define CONFIG_SYS_MALLOC_LEN (0x10000 + 4*1024*1024) /* malloc() len */ 46 #define PHYS_SDRAM_1 DAVINCI_DDR_EMIF_DATA_BASE /* DDR Start */ 47 #define PHYS_SDRAM_1_SIZE (64 << 20) /* SDRAM size 64MB */ 48 #define CONFIG_MAX_RAM_BANK_SIZE (512 << 20) /* max size from SPRS586*/ 49 50 /* memtest start addr */ 51 #define CONFIG_SYS_MEMTEST_START (PHYS_SDRAM_1 + 0x2000000) 52 53 /* memtest will be run on 16MB */ 54 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_1 + 0x2000000 + 16*1024*1024) 55 56 #define CONFIG_NR_DRAM_BANKS 1 /* we have 1 bank of DRAM */ 57 58 /* 59 * Serial Driver info 60 */ 61 #define CONFIG_SYS_NS16550_SERIAL 62 #define CONFIG_SYS_NS16550_REG_SIZE -4 /* NS16550 register size */ 63 #define CONFIG_SYS_NS16550_COM1 DAVINCI_UART0_BASE /* Base address of UART0 */ 64 #define CONFIG_SYS_NS16550_CLK clk_get(DAVINCI_UART2_CLKID) 65 #define CONFIG_CONS_INDEX 1 /* use UART0 for console */ 66 #define CONFIG_BAUDRATE 115200 /* Default baud rate */ 67 68 #define CONFIG_SPI 69 #define CONFIG_DAVINCI_SPI 70 #define CONFIG_SYS_SPI_BASE DAVINCI_SPI1_BASE 71 #define CONFIG_SYS_SPI_CLK clk_get(DAVINCI_SPI1_CLKID) 72 #define CONFIG_SF_DEFAULT_SPEED 30000000 73 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 74 75 /* 76 * I2C Configuration 77 */ 78 #define CONFIG_SYS_I2C 79 #define CONFIG_SYS_I2C_DAVINCI 80 #define CONFIG_SYS_DAVINCI_I2C_SPEED 100000 81 #define CONFIG_SYS_DAVINCI_I2C_SLAVE 10 /* Bogus, master-only in U-Boot */ 82 83 /* 84 * Network & Ethernet Configuration 85 */ 86 #ifdef CONFIG_DRIVER_TI_EMAC 87 #define CONFIG_EMAC_MDIO_PHY_NUM 0 88 #define CONFIG_MII 89 #define CONFIG_BOOTP_DNS 90 #define CONFIG_BOOTP_DNS2 91 #define CONFIG_BOOTP_SEND_HOSTNAME 92 #define CONFIG_NET_RETRY_COUNT 10 93 #endif 94 95 #ifdef CONFIG_USE_SPIFLASH 96 #undef CONFIG_ENV_IS_IN_FLASH 97 #undef CONFIG_ENV_IS_IN_NAND 98 #define CONFIG_ENV_IS_IN_SPI_FLASH 99 #define CONFIG_ENV_SIZE (8 << 10) 100 #define CONFIG_ENV_OFFSET 0x80000 101 #define CONFIG_ENV_SECT_SIZE (64 << 10) 102 #define CONFIG_SYS_NO_FLASH 103 #endif 104 105 106 #if defined(CONFIG_VIDEO) 107 #define CONFIG_VIDEO_DA8XX 108 #define CONFIG_CFB_CONSOLE 109 #define CONFIG_VGA_AS_SINGLE_DEVICE 110 #define CONFIG_SPLASH_SCREEN_ALIGN 111 #define CONFIG_VIDEO_LOGO 112 #define CONFIG_SYS_CONSOLE_INFO_QUIET 113 #define CONFIG_VIDEO_BMP_RLE8 114 #define CONFIG_VIDEO_BMP_LOGO 115 #define CONFIG_CMD_BMP 116 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 117 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 118 #endif 119 120 /* 121 * U-Boot general configuration 122 */ 123 #define CONFIG_BOOTFILE "uImage" /* Boot file name */ 124 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 125 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 126 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 127 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Args Buffer Size */ 128 #define CONFIG_SYS_LOAD_ADDR (PHYS_SDRAM_1 + 0x700000) 129 #define CONFIG_VERSION_VARIABLE 130 #define CONFIG_AUTO_COMPLETE 131 #define CONFIG_CMDLINE_EDITING 132 #define CONFIG_SYS_LONGHELP 133 #define CONFIG_CRC32_VERIFY 134 #define CONFIG_MX_CYCLIC 135 136 /* 137 * Linux Information 138 */ 139 #define LINUX_BOOT_PARAM_ADDR (PHYS_SDRAM_1 + 0x100) 140 #define CONFIG_CMDLINE_TAG 141 #define CONFIG_SETUP_MEMORY_TAGS 142 #define CONFIG_BOOTDELAY 3 143 144 /* 145 * U-Boot commands 146 */ 147 #define CONFIG_CMD_ENV 148 #define CONFIG_CMD_ASKENV 149 #define CONFIG_CMD_DHCP 150 #define CONFIG_CMD_DIAG 151 #define CONFIG_CMD_MII 152 #define CONFIG_CMD_PING 153 #define CONFIG_CMD_SAVES 154 #define CONFIG_CMD_I2C 155 156 #ifdef CONFIG_CMD_BDI 157 #define CONFIG_CLOCKS 158 #endif 159 160 #ifndef CONFIG_DRIVER_TI_EMAC 161 #undef CONFIG_CMD_DHCP 162 #undef CONFIG_CMD_MII 163 #undef CONFIG_CMD_PING 164 #endif 165 166 /* NAND Setup */ 167 #ifdef CONFIG_SYS_USE_NAND 168 #define CONFIG_CMD_NAND 169 170 #define CONFIG_CMD_MTDPARTS 171 #define CONFIG_MTD_DEVICE 172 #define CONFIG_MTD_PARTITIONS 173 #define CONFIG_LZO 174 #define CONFIG_RBTREE 175 #define CONFIG_CMD_UBI 176 #define CONFIG_CMD_UBIFS 177 178 #define CONFIG_NAND_DAVINCI 179 #define CONFIG_SYS_NAND_PAGE_2K 180 #define CONFIG_SYS_NAND_NO_SUBPAGE 181 #define CONFIG_SYS_NAND_CS 2 182 #define CONFIG_SYS_NAND_BASE DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 183 #undef CONFIG_SYS_NAND_HW_ECC 184 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST 185 #define CONFIG_SYS_NAND_USE_FLASH_BBT 186 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND devices */ 187 #endif 188 189 /* SPI Flash */ 190 #ifdef CONFIG_USE_SPIFLASH 191 #define CONFIG_CMD_SPI 192 #define CONFIG_CMD_SF 193 #endif 194 195 #if !defined(CONFIG_SYS_USE_NAND) && \ 196 !defined(CONFIG_USE_NOR) && \ 197 !defined(CONFIG_USE_SPIFLASH) 198 #define CONFIG_ENV_IS_NOWHERE 199 #define CONFIG_SYS_NO_FLASH 200 #define CONFIG_ENV_SIZE (16 << 10) 201 #undef CONFIG_CMD_ENV 202 #endif 203 204 /* additions for new relocation code, must added to all boards */ 205 #define CONFIG_SYS_SDRAM_BASE 0xc0000000 206 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ 207 GENERATED_GBL_DATA_SIZE) 208 /* 209 * Default environment and default scripts 210 * to update uboot and load kernel 211 */ 212 213 #define CONFIG_HOSTNAME ea20 214 #define CONFIG_EXTRA_ENV_SETTINGS \ 215 "as=3\0" \ 216 "netdev=eth0\0" \ 217 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 218 "nfsroot=${serverip}:${rootpath}\0" \ 219 "rfsbargs=setenv bootargs root=/dev/nfs rw " \ 220 "nfsroot=${serverip}:${rfsbpath}\0" \ 221 "testrfsargs=setenv bootargs root=/dev/nfs rw " \ 222 "nfsroot=${serverip}:${testrfspath}\0" \ 223 "ramargs=setenv bootargs root=/dev/ram rw initrd=" \ 224 "0x${ramdisk_addr_r},4M\0" \ 225 "mtdids=nand0=davinci_nand.0\0" \ 226 "serverip=192.168.5.249\0" \ 227 "ipaddr=192.168.5.248\0" \ 228 "rootpath=/opt/eldk/arm\0" \ 229 "splashpos=230,180\0" \ 230 "testrfspath=/opt/eldk/test_arm\0" \ 231 "nandargs=setenv bootargs rootfstype=ubifs ro chk_data_crc " \ 232 "ubi.mtd=${as} root=ubi0:rootfs\0" \ 233 "nandrwargs=setenv bootargs rootfstype=ubifs rw chk_data_crc " \ 234 "ubi.mtd=${as} root=ubi0:rootfs\0" \ 235 "addip_sta=setenv bootargs ${bootargs} " \ 236 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \ 237 ":${hostname}:${netdev}:off panic=1\0" \ 238 "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0" \ 239 "addip=if test -n ${ipdyn};then run addip_dyn;" \ 240 "else run addip_sta;fi\0" \ 241 "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \ 242 "addtty=setenv bootargs ${bootargs}" \ 243 " console=${consoledev},${baudrate}n8\0" \ 244 "addmisc=setenv bootargs ${bootargs} ${misc}\0" \ 245 "addmem=setenv bootargs ${bootargs} mem=${memory}\0" \ 246 "consoledev=ttyS0\0" \ 247 "loadaddr=c0000014\0" \ 248 "memory=32M\0" \ 249 "kernel_addr_r=c0700000\0" \ 250 "hostname=" __stringify(CONFIG_HOSTNAME) "\0" \ 251 "bootfile=" __stringify(CONFIG_HOSTNAME) "/uImage\0" \ 252 "ramdisk_file=" __stringify(CONFIG_HOSTNAME) "/image.ext2\0" \ 253 "flash_self=run ramargs addip addtty addmtd addmisc addmem;" \ 254 "bootm ${kernel_addr_r}\0" \ 255 "flash_nfs=run nfsargs addip addtty addmtd addmisc addmem;" \ 256 "bootm ${kernel_addr}\0" \ 257 "net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \ 258 "run nfsargs addip addtty addmtd addmisc addmem;" \ 259 "bootm ${kernel_addr_r}\0" \ 260 "net_rfsb=tftp ${kernel_addr_r} ${bootfile}; " \ 261 "run rfsbargs addip addtty addmtd addmisc addmem; " \ 262 "bootm ${kernel_addr_r}\0" \ 263 "net_testrfs=tftp ${kernel_addr_r} ${bootfile}; " \ 264 "run testrfsargs addip addtty addmtd addmisc addmem; " \ 265 "bootm ${kernel_addr_r}\0" \ 266 "net_self_load=tftp ${kernel_addr_r} ${bootfile};" \ 267 "tftp ${ramdisk_addr_r} ${ramdisk_file};\0" \ 268 "nand_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ 269 "ubifsload ${kernel_addr_r} /boot/uImage;" \ 270 "ubifsumount; run nandargs addip addtty " \ 271 "addmtd addmisc addmem;clrlogo;" \ 272 "bootm ${kernel_addr_r}\0" \ 273 "nand_nandrw=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ 274 "ubifsload ${kernel_addr_r} /boot/uImage;" \ 275 "ubifsumount; run nandrwargs addip addtty " \ 276 "addmtd addmisc addmem;clrlogo;" \ 277 "bootm ${kernel_addr_r}\0" \ 278 "net_nandrw=tftp ${kernel_addr_r} ${bootfile}; run nandrwargs" \ 279 " addip addtty addmtd addmisc addmem;" \ 280 "clrlogo;bootm ${kernel_addr_r}\0" \ 281 "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.bin\0" \ 282 "load_magic=if sf probe 0;then sf " \ 283 "read c0000000 0x10000 0x60000;fi\0" \ 284 "load_nand=ubi part nand0,${as};ubifsmount ubi:rootfs;" \ 285 "if ubifsload c0000014 /boot/u-boot.bin;" \ 286 "then mw c0000008 ${filesize};else echo Error reading" \ 287 " u-boot from nand!;fi\0" \ 288 "load_net=if sf probe 0;then sf read c0000000 0x10000 " \ 289 "0x60000;tftp c0000014 ${u-boot};" \ 290 "mw c0000008 ${filesize};fi\0" \ 291 "upd=if sf probe 0;then sf erase 10000 60000;" \ 292 "sf write c0000000 10000 60000;fi\0" \ 293 "ublupdate=if tftp C0700000 ${ublname};then sf probe 0; " \ 294 "sf erase 0 10000;" \ 295 "sf write 0xc0700000 0 ${filesize};fi\0" \ 296 "ubootupd_net=if run load_net;then echo Updating u-boot;" \ 297 "if run upd; then echo U-Boot updated;" \ 298 "else echo Error updating u-boot !;" \ 299 "echo Board without bootloader !!;" \ 300 "fi;" \ 301 "else echo U-Boot not downloaded..exiting;fi\0" \ 302 "ubootupd_nand=echo run load_magic,run load_nand,run upd;\0" \ 303 "bootcmd=run net_testrfs\0" 304 305 #endif /* __CONFIG_H */ 306