1 /* 2 * Copyright (C) 2010 Eric C. Cooper <ecc@cmu.edu> 3 * 4 * Based on sheevaplug.h originally written by 5 * Prafulla Wadaskar <prafulla@marvell.com> 6 * (C) Copyright 2009 7 * Marvell Semiconductor <www.marvell.com> 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef _CONFIG_DOCKSTAR_H 13 #define _CONFIG_DOCKSTAR_H 14 15 16 /* 17 * Version number information 18 */ 19 #define CONFIG_IDENT_STRING "\nSeagate FreeAgent DockStar" 20 21 /* 22 * High Level Configuration Options (easy to change) 23 */ 24 #define CONFIG_FEROCEON_88FR131 1 /* CPU Core subversion */ 25 #define CONFIG_KW88F6281 1 /* SOC Name */ 26 #define CONFIG_MACH_DOCKSTAR /* Machine type */ 27 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 28 29 /* 30 * Commands configuration 31 */ 32 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 33 #define CONFIG_CMD_ENV 34 #define CONFIG_CMD_MII 35 #define CONFIG_CMD_NAND 36 /* 37 * mv-common.h should be defined after CMD configs since it used them 38 * to enable certain macros 39 */ 40 #include "mv-common.h" 41 42 /* 43 * Environment variables configurations 44 */ 45 #ifdef CONFIG_CMD_NAND 46 #define CONFIG_ENV_IS_IN_NAND 1 47 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K */ 48 #else 49 #define CONFIG_ENV_IS_NOWHERE 1 /* if env in SDRAM */ 50 #endif 51 /* 52 * max 4k env size is enough, but in case of nand 53 * it has to be rounded to sector size 54 */ 55 #define CONFIG_ENV_SIZE 0x20000 /* 128k */ 56 #define CONFIG_ENV_ADDR 0x80000 57 #define CONFIG_ENV_OFFSET 0x80000 /* env starts here */ 58 59 /* 60 * Default environment variables 61 */ 62 #define CONFIG_BOOTCOMMAND \ 63 "setenv bootargs ${console} ${mtdparts} ${bootargs_root}; " \ 64 "ubi part root; " \ 65 "ubifsmount ubi:root; " \ 66 "ubifsload 0x800000 ${kernel}; " \ 67 "ubifsload 0x1100000 ${initrd}; " \ 68 "bootm 0x800000 0x1100000" 69 70 #define CONFIG_MTDPARTS "mtdparts=orion_nand:1m(uboot),-(root)\0" 71 72 #define CONFIG_EXTRA_ENV_SETTINGS \ 73 "console=console=ttyS0,115200\0" \ 74 "mtdids=nand0=orion_nand\0" \ 75 "mtdparts="CONFIG_MTDPARTS \ 76 "kernel=/boot/uImage\0" \ 77 "initrd=/boot/uInitrd\0" \ 78 "bootargs_root=ubi.mtd=1 root=ubi0:root rootfstype=ubifs ro\0" 79 80 /* 81 * Ethernet Driver configuration 82 */ 83 #ifdef CONFIG_CMD_NET 84 #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ 85 #define CONFIG_PHY_BASE_ADR 0 86 #endif /* CONFIG_CMD_NET */ 87 88 /* 89 * File system 90 */ 91 #define CONFIG_CMD_EXT2 92 #define CONFIG_CMD_FAT 93 #define CONFIG_CMD_JFFS2 94 #define CONFIG_CMD_UBI 95 #define CONFIG_CMD_UBIFS 96 #define CONFIG_RBTREE 97 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 98 #define CONFIG_MTD_PARTITIONS 99 #define CONFIG_CMD_MTDPARTS 100 #define CONFIG_LZO 101 102 #endif /* _CONFIG_DOCKSTAR_H */ 103