1 /* 2 * (C) Copyright 2003 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 */ 23 24 /* 25 * This file contains the configuration parameters for the dbau1x00 board. 26 */ 27 28 #ifndef __CONFIG_H 29 #define __CONFIG_H 30 31 #define CONFIG_MIPS32 1 /* MIPS32 CPU core */ 32 #define CONFIG_DBAU1X00 1 33 #define CONFIG_SOC_AU1X00 1 /* alchemy series cpu */ 34 35 #ifdef CONFIG_DBAU1000 36 /* Also known as Merlot */ 37 #define CONFIG_SOC_AU1000 1 38 #else 39 #ifdef CONFIG_DBAU1100 40 #define CONFIG_SOC_AU1100 1 41 #else 42 #ifdef CONFIG_DBAU1500 43 #define CONFIG_SOC_AU1500 1 44 #else 45 #ifdef CONFIG_DBAU1550 46 /* Cabernet */ 47 #define CONFIG_SOC_AU1550 1 48 #else 49 #error "No valid board set" 50 #endif 51 #endif 52 #endif 53 #endif 54 55 #define CONFIG_ETHADDR DE:AD:BE:EF:01:01 /* Ethernet address */ 56 57 #define CONFIG_BOOTDELAY 2 /* autoboot after 2 seconds */ 58 59 #define CONFIG_BAUDRATE 115200 60 61 /* valid baudrates */ 62 63 #define CONFIG_TIMESTAMP /* Print image info with timestamp */ 64 #undef CONFIG_BOOTARGS 65 66 #define CONFIG_EXTRA_ENV_SETTINGS \ 67 "addmisc=setenv bootargs ${bootargs} " \ 68 "console=ttyS0,${baudrate} " \ 69 "panic=1\0" \ 70 "bootfile=/tftpboot/vmlinux.srec\0" \ 71 "load=tftp 80500000 ${u-boot}\0" \ 72 "" 73 74 #ifdef CONFIG_DBAU1550 75 /* Boot from flash by default, revert to bootp */ 76 #define CONFIG_BOOTCOMMAND "bootm 0xbfc20000; bootp; bootm" 77 #else /* CONFIG_DBAU1550 */ 78 #define CONFIG_BOOTCOMMAND "bootp;bootm" 79 #endif /* CONFIG_DBAU1550 */ 80 81 82 /* 83 * BOOTP options 84 */ 85 #define CONFIG_BOOTP_BOOTFILESIZE 86 #define CONFIG_BOOTP_BOOTPATH 87 #define CONFIG_BOOTP_GATEWAY 88 #define CONFIG_BOOTP_HOSTNAME 89 90 91 /* 92 * Command line configuration. 93 */ 94 #include <config_cmd_default.h> 95 96 #undef CONFIG_CMD_BDI 97 #undef CONFIG_CMD_BEDBUG 98 #undef CONFIG_CMD_ELF 99 #undef CONFIG_CMD_SAVEENV 100 #undef CONFIG_CMD_FAT 101 #undef CONFIG_CMD_FPGA 102 #undef CONFIG_CMD_MII 103 #undef CONFIG_CMD_RUN 104 105 106 #ifdef CONFIG_DBAU1550 107 108 #define CONFIG_CMD_FLASH 109 #define CONFIG_CMD_LOADB 110 #define CONFIG_CMD_NET 111 112 #undef CONFIG_CMD_I2C 113 #undef CONFIG_CMD_IDE 114 #undef CONFIG_CMD_NFS 115 #undef CONFIG_CMD_PCMCIA 116 117 #else 118 119 #define CONFIG_CMD_IDE 120 #define CONFIG_CMD_DHCP 121 122 #undef CONFIG_CMD_FLASH 123 #undef CONFIG_CMD_LOADB 124 #undef CONFIG_CMD_LOADS 125 126 #endif 127 128 129 /* 130 * Miscellaneous configurable options 131 */ 132 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 133 134 #define CONFIG_SYS_PROMPT "DbAu1xx0 # " /* Monitor Command Prompt */ 135 136 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 137 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 138 #define CONFIG_SYS_MAXARGS 16 /* max number of command args*/ 139 140 #define CONFIG_SYS_MALLOC_LEN 128*1024 141 142 #define CONFIG_SYS_BOOTPARAMS_LEN 128*1024 143 144 #define CONFIG_SYS_MHZ 396 145 146 #if (CONFIG_SYS_MHZ % 12) != 0 147 #error "Invalid CPU frequency - must be multiple of 12!" 148 #endif 149 150 #define CONFIG_SYS_MIPS_TIMER_FREQ (CONFIG_SYS_MHZ * 1000000) 151 152 #define CONFIG_SYS_HZ 1000 153 154 #define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */ 155 156 #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* default load address */ 157 158 #define CONFIG_SYS_MEMTEST_START 0x80100000 159 #define CONFIG_SYS_MEMTEST_END 0x80800000 160 161 /*----------------------------------------------------------------------- 162 * FLASH and environment organization 163 */ 164 #ifdef CONFIG_DBAU1550 165 166 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ 167 #define CONFIG_SYS_MAX_FLASH_SECT (512) /* max number of sectors on one chip */ 168 169 #define PHYS_FLASH_1 0xb8000000 /* Flash Bank #1 */ 170 #define PHYS_FLASH_2 0xbc000000 /* Flash Bank #2 */ 171 172 #else /* CONFIG_DBAU1550 */ 173 174 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max number of memory banks */ 175 #define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */ 176 177 #define PHYS_FLASH_1 0xbec00000 /* Flash Bank #1 */ 178 #define PHYS_FLASH_2 0xbfc00000 /* Flash Bank #2 */ 179 180 #endif /* CONFIG_DBAU1550 */ 181 182 #define CONFIG_SYS_FLASH_BANKS_LIST {PHYS_FLASH_1, PHYS_FLASH_2} 183 184 #define CONFIG_SYS_FLASH_CFI 1 185 #define CONFIG_FLASH_CFI_DRIVER 1 186 187 /* The following #defines are needed to get flash environment right */ 188 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 189 #define CONFIG_SYS_MONITOR_LEN (192 << 10) 190 191 #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 192 193 /* We boot from this flash, selected with dip switch */ 194 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_2 195 196 /* timeout values are in ticks */ 197 #define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */ 198 #define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */ 199 200 #define CONFIG_ENV_IS_NOWHERE 1 201 202 /* Address and size of Primary Environment Sector */ 203 #define CONFIG_ENV_ADDR 0xB0030000 204 #define CONFIG_ENV_SIZE 0x10000 205 206 #define CONFIG_FLASH_16BIT 207 208 #define CONFIG_NR_DRAM_BANKS 2 209 210 211 #ifdef CONFIG_DBAU1550 212 #define MEM_SIZE 192 213 #else 214 #define MEM_SIZE 64 215 #endif 216 217 #define CONFIG_MEMSIZE_IN_BYTES 218 219 #ifndef CONFIG_DBAU1550 220 /*---ATA PCMCIA ------------------------------------*/ 221 #define CONFIG_SYS_PCMCIA_MEM_SIZE 0x4000000 /* Offset to slot 1 FIXME!!! */ 222 #define CONFIG_SYS_PCMCIA_MEM_ADDR 0x20000000 223 #define CONFIG_PCMCIA_SLOT_A 224 225 #define CONFIG_ATAPI 1 226 #define CONFIG_MAC_PARTITION 1 227 228 /* We run CF in "true ide" mode or a harddrive via pcmcia */ 229 #define CONFIG_IDE_PCMCIA 1 230 231 /* We only support one slot for now */ 232 #define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */ 233 #define CONFIG_SYS_IDE_MAXDEVICE 1 /* max. 1 drive per IDE bus */ 234 235 #undef CONFIG_IDE_LED /* LED for ide not supported */ 236 #undef CONFIG_IDE_RESET /* reset for ide not supported */ 237 238 #define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 239 240 #define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_PCMCIA_MEM_ADDR 241 242 /* Offset for data I/O */ 243 #define CONFIG_SYS_ATA_DATA_OFFSET 8 244 245 /* Offset for normal register accesses */ 246 #define CONFIG_SYS_ATA_REG_OFFSET 0 247 248 /* Offset for alternate registers */ 249 #define CONFIG_SYS_ATA_ALT_OFFSET 0x0100 250 #endif /* CONFIG_DBAU1550 */ 251 252 /*----------------------------------------------------------------------- 253 * Cache Configuration 254 */ 255 #define CONFIG_SYS_DCACHE_SIZE 16384 256 #define CONFIG_SYS_ICACHE_SIZE 16384 257 #define CONFIG_SYS_CACHELINE_SIZE 32 258 259 #endif /* __CONFIG_H */ 260