1 /* 2 * Copyright (C) 2014 Stefan Roese <sr@denx.de> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 #ifndef _CONFIG_DB_88F6820_GP_H 8 #define _CONFIG_DB_88F6820_GP_H 9 10 /* 11 * High Level Configuration Options (easy to change) 12 */ 13 #define CONFIG_ARMADA_XP /* SOC Family Name */ 14 #define CONFIG_DB_88F6820_GP /* Board target name for DDR training */ 15 16 #define CONFIG_SYS_L2_PL310 17 18 #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ 19 #define CONFIG_SYS_GENERIC_BOARD 20 #define CONFIG_DISPLAY_BOARDINFO_LATE 21 22 #define CONFIG_SYS_TEXT_BASE 0x04000000 23 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ 24 25 /* 26 * Commands configuration 27 */ 28 #define CONFIG_SYS_NO_FLASH /* Declare no flash (NOR/SPI) */ 29 #define CONFIG_CMD_CACHE 30 #define CONFIG_CMD_DHCP 31 #define CONFIG_CMD_ENV 32 #define CONFIG_CMD_EXT2 33 #define CONFIG_CMD_EXT4 34 #define CONFIG_CMD_FAT 35 #define CONFIG_CMD_FS_GENERIC 36 #define CONFIG_CMD_I2C 37 #define CONFIG_CMD_MMC 38 #define CONFIG_CMD_PING 39 #define CONFIG_CMD_SF 40 #define CONFIG_CMD_SPI 41 #define CONFIG_CMD_TFTPPUT 42 #define CONFIG_CMD_TIME 43 44 /* I2C */ 45 #define CONFIG_SYS_I2C 46 #define CONFIG_SYS_I2C_MVTWSI 47 #define CONFIG_I2C_MVTWSI_BASE0 MVEBU_TWSI_BASE 48 #define CONFIG_SYS_I2C_SLAVE 0x0 49 #define CONFIG_SYS_I2C_SPEED 100000 50 51 /* SPI NOR flash default params, used by sf commands */ 52 #define CONFIG_SF_DEFAULT_SPEED 1000000 53 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 54 #define CONFIG_SPI_FLASH_STMICRO 55 56 /* 57 * SDIO/MMC Card Configuration 58 */ 59 #define CONFIG_MMC 60 #define CONFIG_MMC_SDMA 61 #define CONFIG_GENERIC_MMC 62 #define CONFIG_SDHCI 63 #define CONFIG_MV_SDHCI 64 #define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE 65 66 /* Partition support */ 67 #define CONFIG_DOS_PARTITION 68 #define CONFIG_EFI_PARTITION 69 70 /* Additional FS support/configuration */ 71 #define CONFIG_SUPPORT_VFAT 72 73 /* Environment in SPI NOR flash */ 74 #define CONFIG_ENV_IS_IN_SPI_FLASH 75 #define CONFIG_ENV_OFFSET (1 << 20) /* 1MiB in */ 76 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ 77 #define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ 78 79 #define CONFIG_PHY_MARVELL /* there is a marvell phy */ 80 #define CONFIG_PHY_ADDR { 1, 0 } 81 #define CONFIG_SYS_NETA_INTERFACE_TYPE PHY_INTERFACE_MODE_RGMII 82 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ 83 84 #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup */ 85 #define CONFIG_SYS_ALT_MEMTEST 86 87 /* Keep device tree and initrd in lower memory so the kernel can access them */ 88 #define CONFIG_EXTRA_ENV_SETTINGS \ 89 "fdt_high=0x10000000\0" \ 90 "initrd_high=0x10000000\0" 91 92 /* 93 * mv-common.h should be defined after CMD configs since it used them 94 * to enable certain macros 95 */ 96 #include "mv-common.h" 97 98 #endif /* _CONFIG_DB_88F6820_GP_H */ 99