1 /* 2 * Common board functions for siemens AT91SAM9G45 based boards 3 * (C) Copyright 2013 Siemens AG 4 * 5 * Based on: 6 * U-Boot file: include/configs/at91sam9m10g45ek.h 7 * (C) Copyright 2007-2008 8 * Stelian Pop <stelian@popies.net> 9 * Lead Tech Design <www.leadtechdesign.com> 10 * 11 * SPDX-License-Identifier: GPL-2.0+ 12 */ 13 14 #ifndef __CONFIG_H 15 #define __CONFIG_H 16 17 #include <asm/hardware.h> 18 #include <linux/sizes.h> 19 20 /* 21 * Warning: changing CONFIG_SYS_TEXT_BASE requires 22 * adapting the initial boot program. 23 * Since the linker has to swallow that define, we must use a pure 24 * hex number here! 25 */ 26 27 #define CONFIG_SYS_TEXT_BASE 0x72000000 28 29 #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ 30 31 /* ARM asynchronous clock */ 32 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 33 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* from 12 MHz crystal */ 34 35 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 36 #define CONFIG_SETUP_MEMORY_TAGS 37 #define CONFIG_INITRD_TAG 38 #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY 39 40 /* general purpose I/O */ 41 #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ 42 #define CONFIG_AT91_GPIO 43 #define CONFIG_AT91_GPIO_PULLUP 1 /* keep pullups on peripheral pins */ 44 45 /* serial console */ 46 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 47 #define CONFIG_USART_ID ATMEL_ID_SYS 48 49 /* LED */ 50 #define CONFIG_AT91_LED 51 #define CONFIG_RED_LED AT91_PIN_PD31 /* this is the user1 led */ 52 #define CONFIG_GREEN_LED AT91_PIN_PD0 /* this is the user2 led */ 53 54 55 /* 56 * BOOTP options 57 */ 58 #define CONFIG_BOOTP_BOOTFILESIZE 59 #define CONFIG_BOOTP_BOOTPATH 60 #define CONFIG_BOOTP_GATEWAY 61 #define CONFIG_BOOTP_HOSTNAME 62 63 /* SDRAM */ 64 #define CONFIG_NR_DRAM_BANKS 1 65 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS6 66 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 67 68 #define CONFIG_SYS_INIT_SP_ADDR \ 69 (CONFIG_SYS_SDRAM_BASE + SZ_32K - GENERATED_GBL_DATA_SIZE) 70 71 /* NAND flash */ 72 #ifdef CONFIG_CMD_NAND 73 #define CONFIG_SYS_MAX_NAND_DEVICE 1 74 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3 75 #define CONFIG_SYS_NAND_DBW_8 76 /* our ALE is AD21 */ 77 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 78 /* our CLE is AD22 */ 79 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 80 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14 81 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC8 82 #endif 83 84 /* Ethernet */ 85 #define CONFIG_MACB 86 #define CONFIG_RMII 87 #define CONFIG_NET_RETRY_COUNT 20 88 #define CONFIG_AT91_WANTS_COMMON_PHY 89 90 #define CONFIG_MTD_DEVICE 91 #define CONFIG_MTD_PARTITIONS 92 93 /* DFU class support */ 94 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M) 95 #define DFU_MANIFEST_POLL_TIMEOUT 25000 96 97 #define CONFIG_SYS_LOAD_ADDR ATMEL_BASE_CS6 98 99 /* bootstrap + u-boot + env in nandflash */ 100 #define CONFIG_ENV_OFFSET 0x100000 101 #define CONFIG_ENV_OFFSET_REDUND 0x180000 102 #define CONFIG_ENV_SIZE SZ_128K 103 104 #define CONFIG_BOOTCOMMAND \ 105 "nand read 0x70000000 0x200000 0x300000;" \ 106 "bootm 0x70000000" 107 108 #define CONFIG_SYS_LONGHELP 109 #define CONFIG_CMDLINE_EDITING 110 #define CONFIG_AUTO_COMPLETE 111 112 /* 113 * Size of malloc() pool 114 */ 115 #define CONFIG_SYS_MALLOC_LEN ROUND(3 * CONFIG_ENV_SIZE + \ 116 SZ_4M, 0x1000) 117 118 /* Defines for SPL */ 119 #define CONFIG_SPL_FRAMEWORK 120 #define CONFIG_SPL_TEXT_BASE 0x300000 121 #define CONFIG_SPL_MAX_SIZE (12 * SZ_1K) 122 #define CONFIG_SPL_STACK (SZ_16K) 123 124 #define CONFIG_SPL_BSS_START_ADDR CONFIG_SPL_MAX_SIZE 125 #define CONFIG_SPL_BSS_MAX_SIZE (SZ_2K) 126 127 #define CONFIG_SPL_NAND_DRIVERS 128 #define CONFIG_SPL_NAND_BASE 129 #define CONFIG_SPL_NAND_ECC 130 #define CONFIG_SPL_NAND_RAW_ONLY 131 #define CONFIG_SPL_NAND_SOFTECC 132 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 133 #define CONFIG_SYS_NAND_U_BOOT_SIZE 0x80000 134 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 135 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE 136 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 137 138 #define CONFIG_SYS_NAND_PAGE_SIZE SZ_2K 139 #define CONFIG_SYS_NAND_BLOCK_SIZE (SZ_128K) 140 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 141 CONFIG_SYS_NAND_PAGE_SIZE) 142 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 143 #define CONFIG_SYS_NAND_ECCSIZE 256 144 #define CONFIG_SYS_NAND_ECCBYTES 3 145 #define CONFIG_SYS_NAND_OOBSIZE 64 146 #define CONFIG_SYS_NAND_ECCPOS { 40, 41, 42, 43, 44, 45, 46, 47, \ 147 48, 49, 50, 51, 52, 53, 54, 55, \ 148 56, 57, 58, 59, 60, 61, 62, 63, } 149 150 #define CONFIG_SPL_ATMEL_SIZE 151 #define CONFIG_SYS_MASTER_CLOCK 132096000 152 #define AT91_PLL_LOCK_TIMEOUT 1000000 153 #define CONFIG_SYS_AT91_PLLA 0x20c73f03 154 #define CONFIG_SYS_MCKR 0x1301 155 #define CONFIG_SYS_MCKR_CSS 0x1302 156 157 #endif 158