1 /* 2 * Copyright 2009-2011 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 * Corenet DS style board configuration file 25 */ 26 #ifndef __CONFIG_H 27 #define __CONFIG_H 28 29 #include "../board/freescale/common/ics307_clk.h" 30 31 #ifdef CONFIG_RAMBOOT_PBL 32 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 33 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 34 #endif 35 36 /* High Level Configuration Options */ 37 #define CONFIG_BOOKE 38 #define CONFIG_E500 /* BOOKE e500 family */ 39 #define CONFIG_E500MC /* BOOKE e500mc family */ 40 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 41 #define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ 42 #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ 43 #define CONFIG_MP /* support multiple processors */ 44 45 #ifndef CONFIG_SYS_TEXT_BASE 46 #define CONFIG_SYS_TEXT_BASE 0xeff80000 47 #endif 48 49 #ifndef CONFIG_RESET_VECTOR_ADDRESS 50 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 51 #endif 52 53 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 54 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 55 #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ 56 #define CONFIG_PCI /* Enable PCI/PCIE */ 57 #define CONFIG_PCIE1 /* PCIE controler 1 */ 58 #define CONFIG_PCIE2 /* PCIE controler 2 */ 59 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 60 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 61 62 #define CONFIG_SYS_SRIO 63 #define CONFIG_SRIO1 /* SRIO port 1 */ 64 #define CONFIG_SRIO2 /* SRIO port 2 */ 65 66 #define CONFIG_FSL_LAW /* Use common FSL init code */ 67 68 #define CONFIG_ENV_OVERWRITE 69 70 #ifdef CONFIG_SYS_NO_FLASH 71 #define CONFIG_ENV_IS_NOWHERE 72 #else 73 #define CONFIG_FLASH_CFI_DRIVER 74 #define CONFIG_SYS_FLASH_CFI 75 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 76 #endif 77 78 #if defined(CONFIG_SPIFLASH) 79 #define CONFIG_SYS_EXTRA_ENV_RELOC 80 #define CONFIG_ENV_IS_IN_SPI_FLASH 81 #define CONFIG_ENV_SPI_BUS 0 82 #define CONFIG_ENV_SPI_CS 0 83 #define CONFIG_ENV_SPI_MAX_HZ 10000000 84 #define CONFIG_ENV_SPI_MODE 0 85 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 86 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 87 #define CONFIG_ENV_SECT_SIZE 0x10000 88 #elif defined(CONFIG_SDCARD) 89 #define CONFIG_SYS_EXTRA_ENV_RELOC 90 #define CONFIG_ENV_IS_IN_MMC 91 #define CONFIG_FSL_FIXED_MMC_LOCATION 92 #define CONFIG_SYS_MMC_ENV_DEV 0 93 #define CONFIG_ENV_SIZE 0x2000 94 #define CONFIG_ENV_OFFSET (512 * 1097) 95 #elif defined(CONFIG_NAND) 96 #define CONFIG_SYS_EXTRA_ENV_RELOC 97 #define CONFIG_ENV_IS_IN_NAND 98 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 99 #define CONFIG_ENV_OFFSET (5 * CONFIG_SYS_NAND_BLOCK_SIZE) 100 #elif defined(CONFIG_ENV_IS_NOWHERE) 101 #define CONFIG_ENV_SIZE 0x2000 102 #else 103 #define CONFIG_ENV_IS_IN_FLASH 104 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 105 #define CONFIG_ENV_SIZE 0x2000 106 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 107 #endif 108 109 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk() /* sysclk for MPC85xx */ 110 111 /* 112 * These can be toggled for performance analysis, otherwise use default. 113 */ 114 #define CONFIG_SYS_CACHE_STASHING 115 #define CONFIG_BACKSIDE_L2_CACHE 116 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 117 #define CONFIG_BTB /* toggle branch predition */ 118 #define CONFIG_DDR_ECC 119 #ifdef CONFIG_DDR_ECC 120 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 121 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 122 #endif 123 124 #define CONFIG_ENABLE_36BIT_PHYS 125 126 #ifdef CONFIG_PHYS_64BIT 127 #define CONFIG_ADDR_MAP 128 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 129 #endif 130 131 #define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ 132 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 133 #define CONFIG_SYS_MEMTEST_END 0x00400000 134 #define CONFIG_SYS_ALT_MEMTEST 135 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 136 137 /* 138 * Config the L3 Cache as L3 SRAM 139 */ 140 #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE 141 #ifdef CONFIG_PHYS_64BIT 142 #define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | CONFIG_RAMBOOT_TEXT_BASE) 143 #else 144 #define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR 145 #endif 146 #define CONFIG_SYS_L3_SIZE (1024 << 10) 147 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) 148 149 #ifdef CONFIG_PHYS_64BIT 150 #define CONFIG_SYS_DCSRBAR 0xf0000000 151 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 152 #endif 153 154 /* EEPROM */ 155 #define CONFIG_ID_EEPROM 156 #define CONFIG_SYS_I2C_EEPROM_NXID 157 #define CONFIG_SYS_EEPROM_BUS_NUM 0 158 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 159 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 160 161 /* 162 * DDR Setup 163 */ 164 #define CONFIG_VERY_BIG_RAM 165 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 166 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 167 168 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 169 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 170 171 #define CONFIG_DDR_SPD 172 #define CONFIG_FSL_DDR3 173 174 #ifdef CONFIG_P3060QDS 175 #define CONFIG_SYS_SPD_BUS_NUM 0 176 #else 177 #define CONFIG_SYS_SPD_BUS_NUM 1 178 #endif 179 #define SPD_EEPROM_ADDRESS1 0x51 180 #define SPD_EEPROM_ADDRESS2 0x52 181 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ 182 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 183 184 /* 185 * Local Bus Definitions 186 */ 187 188 /* Set the local bus clock 1/8 of platform clock */ 189 #define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8 190 191 #define CONFIG_SYS_FLASH_BASE 0xe0000000 /* Start of PromJet */ 192 #ifdef CONFIG_PHYS_64BIT 193 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull 194 #else 195 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 196 #endif 197 198 #define CONFIG_SYS_FLASH_BR_PRELIM \ 199 (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) \ 200 | BR_PS_16 | BR_V) 201 #define CONFIG_SYS_FLASH_OR_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \ 202 | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR) 203 204 #define CONFIG_SYS_BR1_PRELIM \ 205 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) 206 #define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 207 208 #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ 209 #ifdef CONFIG_PHYS_64BIT 210 #define PIXIS_BASE_PHYS 0xfffdf0000ull 211 #else 212 #define PIXIS_BASE_PHYS PIXIS_BASE 213 #endif 214 215 #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) 216 #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ 217 218 #define PIXIS_LBMAP_SWITCH 7 219 #define PIXIS_LBMAP_MASK 0xf0 220 #define PIXIS_LBMAP_SHIFT 4 221 #define PIXIS_LBMAP_ALTBANK 0x40 222 223 #define CONFIG_SYS_FLASH_QUIET_TEST 224 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 225 226 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 227 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 228 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 229 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 230 231 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 232 233 #if defined(CONFIG_RAMBOOT_PBL) 234 #define CONFIG_SYS_RAMBOOT 235 #endif 236 237 /* Nand Flash */ 238 #ifdef CONFIG_NAND_FSL_ELBC 239 #define CONFIG_SYS_NAND_BASE 0xffa00000 240 #ifdef CONFIG_PHYS_64BIT 241 #define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull 242 #else 243 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 244 #endif 245 246 #define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} 247 #define CONFIG_SYS_MAX_NAND_DEVICE 1 248 #define CONFIG_MTD_NAND_VERIFY_WRITE 249 #define CONFIG_CMD_NAND 250 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 251 252 /* NAND flash config */ 253 #define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 254 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 255 | BR_PS_8 /* Port Size = 8 bit */ \ 256 | BR_MS_FCM /* MSEL = FCM */ \ 257 | BR_V) /* valid */ 258 #define CONFIG_SYS_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ 259 | OR_FCM_PGS /* Large Page*/ \ 260 | OR_FCM_CSCT \ 261 | OR_FCM_CST \ 262 | OR_FCM_CHT \ 263 | OR_FCM_SCY_1 \ 264 | OR_FCM_TRLX \ 265 | OR_FCM_EHTR) 266 267 #ifdef CONFIG_NAND 268 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 269 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 270 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 271 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 272 #else 273 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 274 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 275 #define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ 276 #define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ 277 #endif 278 #else 279 #define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_FLASH_BR_PRELIM /* NOR Base Address */ 280 #define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_FLASH_OR_PRELIM /* NOR Options */ 281 #endif /* CONFIG_NAND_FSL_ELBC */ 282 283 #define CONFIG_SYS_FLASH_EMPTY_INFO 284 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 285 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 286 287 #define CONFIG_BOARD_EARLY_INIT_F 288 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 289 #define CONFIG_MISC_INIT_R 290 291 #define CONFIG_HWCONFIG 292 293 /* define to use L1 as initial stack */ 294 #define CONFIG_L1_INIT_RAM 295 #define CONFIG_SYS_INIT_RAM_LOCK 296 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 297 #ifdef CONFIG_PHYS_64BIT 298 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 299 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR 300 /* The assembler doesn't like typecast */ 301 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 302 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 303 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 304 #else 305 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR /* Initial L1 address */ 306 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 307 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 308 #endif 309 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 /* Size of used area in RAM */ 310 311 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 312 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 313 314 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 315 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 316 317 /* Serial Port - controlled on board with jumper J8 318 * open - index 2 319 * shorted - index 1 320 */ 321 #define CONFIG_CONS_INDEX 1 322 #define CONFIG_SYS_NS16550 323 #define CONFIG_SYS_NS16550_SERIAL 324 #define CONFIG_SYS_NS16550_REG_SIZE 1 325 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 326 327 #define CONFIG_SYS_BAUDRATE_TABLE \ 328 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 329 330 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 331 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 332 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 333 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 334 335 /* Use the HUSH parser */ 336 #define CONFIG_SYS_HUSH_PARSER 337 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 338 339 /* pass open firmware flat tree */ 340 #define CONFIG_OF_LIBFDT 341 #define CONFIG_OF_BOARD_SETUP 342 #define CONFIG_OF_STDOUT_VIA_ALIAS 343 344 /* new uImage format support */ 345 #define CONFIG_FIT 346 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 347 348 /* I2C */ 349 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 350 #define CONFIG_HARD_I2C /* I2C with hardware support */ 351 #define CONFIG_I2C_MULTI_BUS 352 #define CONFIG_I2C_CMD_TREE 353 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 354 #define CONFIG_SYS_I2C_SLAVE 0x7F 355 #define CONFIG_SYS_I2C_OFFSET 0x118000 356 #define CONFIG_SYS_I2C2_OFFSET 0x118100 357 358 /* 359 * RapidIO 360 */ 361 #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 362 #ifdef CONFIG_PHYS_64BIT 363 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull 364 #else 365 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 366 #endif 367 #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ 368 369 #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 370 #ifdef CONFIG_PHYS_64BIT 371 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull 372 #else 373 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 374 #endif 375 #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ 376 377 /* 378 * SRIOBOOT - MASTER 379 */ 380 #ifdef CONFIG_SRIOBOOT_MASTER 381 /* master port for srioboot*/ 382 #define CONFIG_SRIOBOOT_MASTER_PORT 0 383 /* #define CONFIG_SRIOBOOT_MASTER_PORT 1 */ 384 /* 385 * for slave u-boot IMAGE instored in master memory space, 386 * PHYS must be aligned based on the SIZE 387 */ 388 #define CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS1 0xfef080000ull 389 #define CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS1 0xfff80000ull 390 #define CONFIG_SRIOBOOT_SLAVE_IMAGE_SIZE 0x80000 /* 512K */ 391 #define CONFIG_SRIOBOOT_SLAVE_IMAGE_LAW_PHYS2 0xfef080000ull 392 #define CONFIG_SRIOBOOT_SLAVE_IMAGE_SRIO_PHYS2 0x3fff80000ull 393 #endif 394 395 /* 396 * eSPI - Enhanced SPI 397 */ 398 #define CONFIG_FSL_ESPI 399 #define CONFIG_SPI_FLASH 400 #define CONFIG_SPI_FLASH_SPANSION 401 #define CONFIG_CMD_SF 402 #define CONFIG_SF_DEFAULT_SPEED 10000000 403 #define CONFIG_SF_DEFAULT_MODE 0 404 405 /* 406 * General PCI 407 * Memory space is mapped 1-1, but I/O space must start from 0. 408 */ 409 410 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 411 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 412 #ifdef CONFIG_PHYS_64BIT 413 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 414 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 415 #else 416 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 417 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 418 #endif 419 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 420 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 421 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 422 #ifdef CONFIG_PHYS_64BIT 423 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 424 #else 425 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 426 #endif 427 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 428 429 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 430 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 431 #ifdef CONFIG_PHYS_64BIT 432 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 433 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 434 #else 435 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 436 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 437 #endif 438 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 439 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 440 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 441 #ifdef CONFIG_PHYS_64BIT 442 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 443 #else 444 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 445 #endif 446 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 447 448 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 449 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 450 #ifdef CONFIG_PHYS_64BIT 451 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 452 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull 453 #else 454 #define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 455 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 456 #endif 457 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 458 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 459 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 460 #ifdef CONFIG_PHYS_64BIT 461 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 462 #else 463 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 464 #endif 465 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 466 467 /* controller 4, Base address 203000 */ 468 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 469 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull 470 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ 471 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 472 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 473 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 474 475 /* Qman/Bman */ 476 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 477 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 478 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 479 #ifdef CONFIG_PHYS_64BIT 480 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 481 #else 482 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 483 #endif 484 #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 485 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 486 #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 487 #ifdef CONFIG_PHYS_64BIT 488 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull 489 #else 490 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 491 #endif 492 #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 493 494 #define CONFIG_SYS_DPAA_FMAN 495 #define CONFIG_SYS_DPAA_PME 496 /* Default address of microcode for the Linux Fman driver */ 497 #if defined(CONFIG_SPIFLASH) 498 /* 499 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 500 * env, so we got 0x110000. 501 */ 502 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 503 #define CONFIG_SYS_QE_FMAN_FW_ADDR 0x110000 504 #elif defined(CONFIG_SDCARD) 505 /* 506 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 507 * about 545KB (1089 blocks), Env is stored after the image, and the env size is 508 * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. 509 */ 510 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 511 #define CONFIG_SYS_QE_FMAN_FW_ADDR (512 * 1130) 512 #elif defined(CONFIG_NAND) 513 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 514 #define CONFIG_SYS_QE_FMAN_FW_ADDR (6 * CONFIG_SYS_NAND_BLOCK_SIZE) 515 #else 516 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 517 #define CONFIG_SYS_QE_FMAN_FW_ADDR 0xEF000000 518 #endif 519 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 520 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 521 522 #ifdef CONFIG_SYS_DPAA_FMAN 523 #define CONFIG_FMAN_ENET 524 #define CONFIG_PHYLIB_10G 525 #define CONFIG_PHY_VITESSE 526 #define CONFIG_PHY_TERANETICS 527 #endif 528 529 #ifdef CONFIG_PCI 530 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 531 #define CONFIG_E1000 532 533 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 534 #define CONFIG_DOS_PARTITION 535 #endif /* CONFIG_PCI */ 536 537 /* SATA */ 538 #ifdef CONFIG_FSL_SATA_V2 539 #define CONFIG_LIBATA 540 #define CONFIG_FSL_SATA 541 542 #define CONFIG_SYS_SATA_MAX_DEVICE 2 543 #define CONFIG_SATA1 544 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 545 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 546 #define CONFIG_SATA2 547 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 548 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 549 550 #define CONFIG_LBA48 551 #define CONFIG_CMD_SATA 552 #define CONFIG_DOS_PARTITION 553 #define CONFIG_CMD_EXT2 554 #endif 555 556 #ifdef CONFIG_FMAN_ENET 557 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x1c 558 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x1d 559 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR 0x1e 560 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x1f 561 #define CONFIG_SYS_FM1_10GEC1_PHY_ADDR 4 562 563 #define CONFIG_SYS_FM2_DTSEC1_PHY_ADDR 0x1c 564 #define CONFIG_SYS_FM2_DTSEC2_PHY_ADDR 0x1d 565 #define CONFIG_SYS_FM2_DTSEC3_PHY_ADDR 0x1e 566 #define CONFIG_SYS_FM2_DTSEC4_PHY_ADDR 0x1f 567 #define CONFIG_SYS_FM2_10GEC1_PHY_ADDR 0 568 569 #define CONFIG_SYS_TBIPA_VALUE 8 570 #define CONFIG_MII /* MII PHY management */ 571 #define CONFIG_ETHPRIME "FM1@DTSEC1" 572 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 573 #endif 574 575 /* 576 * Environment 577 */ 578 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 579 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 580 581 /* 582 * Command line configuration. 583 */ 584 #include <config_cmd_default.h> 585 586 #define CONFIG_CMD_DHCP 587 #define CONFIG_CMD_ELF 588 #define CONFIG_CMD_ERRATA 589 #define CONFIG_CMD_GREPENV 590 #define CONFIG_CMD_IRQ 591 #define CONFIG_CMD_I2C 592 #define CONFIG_CMD_MII 593 #define CONFIG_CMD_PING 594 #define CONFIG_CMD_SETEXPR 595 #define CONFIG_CMD_REGINFO 596 597 #ifdef CONFIG_PCI 598 #define CONFIG_CMD_PCI 599 #define CONFIG_CMD_NET 600 #endif 601 602 /* 603 * USB 604 */ 605 #define CONFIG_CMD_USB 606 #define CONFIG_USB_STORAGE 607 #define CONFIG_USB_EHCI 608 #define CONFIG_USB_EHCI_FSL 609 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 610 #define CONFIG_CMD_EXT2 611 #define CONFIG_HAS_FSL_DR_USB 612 613 #ifdef CONFIG_MMC 614 #define CONFIG_FSL_ESDHC 615 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 616 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 617 #define CONFIG_CMD_MMC 618 #define CONFIG_GENERIC_MMC 619 #define CONFIG_CMD_EXT2 620 #define CONFIG_CMD_FAT 621 #define CONFIG_DOS_PARTITION 622 #endif 623 624 /* 625 * Miscellaneous configurable options 626 */ 627 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 628 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 629 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 630 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 631 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 632 #ifdef CONFIG_CMD_KGDB 633 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 634 #else 635 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 636 #endif 637 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 638 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 639 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 640 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 641 642 /* 643 * For booting Linux, the board info and command line data 644 * have to be in the first 64 MB of memory, since this is 645 * the maximum mapped by the Linux kernel during initialization. 646 */ 647 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory map for Linux*/ 648 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 649 650 #ifdef CONFIG_CMD_KGDB 651 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 652 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 653 #endif 654 655 /* 656 * Environment Configuration 657 */ 658 #define CONFIG_ROOTPATH "/opt/nfsroot" 659 #define CONFIG_BOOTFILE "uImage" 660 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 661 662 /* default location for tftp and bootm */ 663 #define CONFIG_LOADADDR 1000000 664 665 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 666 667 #define CONFIG_BAUDRATE 115200 668 669 #if defined(CONFIG_P4080DS) || defined(CONFIG_P3060QDS) 670 #define __USB_PHY_TYPE ulpi 671 #else 672 #define __USB_PHY_TYPE utmi 673 #endif 674 675 #define CONFIG_EXTRA_ENV_SETTINGS \ 676 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ 677 "bank_intlv=cs0_cs1;" \ 678 "usb1:dr_mode=host,phy_type=" MK_STR(__USB_PHY_TYPE) "\0"\ 679 "netdev=eth0\0" \ 680 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 681 "ubootaddr=" MK_STR(CONFIG_SYS_TEXT_BASE) "\0" \ 682 "tftpflash=tftpboot $loadaddr $uboot && " \ 683 "protect off $ubootaddr +$filesize && " \ 684 "erase $ubootaddr +$filesize && " \ 685 "cp.b $loadaddr $ubootaddr $filesize && " \ 686 "protect on $ubootaddr +$filesize && " \ 687 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 688 "consoledev=ttyS0\0" \ 689 "ramdiskaddr=2000000\0" \ 690 "ramdiskfile=p4080ds/ramdisk.uboot\0" \ 691 "fdtaddr=c00000\0" \ 692 "fdtfile=p4080ds/p4080ds.dtb\0" \ 693 "bdev=sda3\0" \ 694 "c=ffe\0" 695 696 #define CONFIG_HDBOOT \ 697 "setenv bootargs root=/dev/$bdev rw " \ 698 "console=$consoledev,$baudrate $othbootargs;" \ 699 "tftp $loadaddr $bootfile;" \ 700 "tftp $fdtaddr $fdtfile;" \ 701 "bootm $loadaddr - $fdtaddr" 702 703 #define CONFIG_NFSBOOTCOMMAND \ 704 "setenv bootargs root=/dev/nfs rw " \ 705 "nfsroot=$serverip:$rootpath " \ 706 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 707 "console=$consoledev,$baudrate $othbootargs;" \ 708 "tftp $loadaddr $bootfile;" \ 709 "tftp $fdtaddr $fdtfile;" \ 710 "bootm $loadaddr - $fdtaddr" 711 712 #define CONFIG_RAMBOOTCOMMAND \ 713 "setenv bootargs root=/dev/ram rw " \ 714 "console=$consoledev,$baudrate $othbootargs;" \ 715 "tftp $ramdiskaddr $ramdiskfile;" \ 716 "tftp $loadaddr $bootfile;" \ 717 "tftp $fdtaddr $fdtfile;" \ 718 "bootm $loadaddr $ramdiskaddr $fdtaddr" 719 720 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 721 722 #ifdef CONFIG_SECURE_BOOT 723 #include <asm/fsl_secure_boot.h> 724 #endif 725 726 #endif /* __CONFIG_H */ 727