1 /* 2 * Copyright 2015 Toradex, Inc. 3 * 4 * Configuration settings for the Toradex VF50/VF61 module. 5 * 6 * Based on vf610twr.h: 7 * Copyright 2013 Freescale Semiconductor, Inc. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __CONFIG_H 13 #define __CONFIG_H 14 15 #define CONFIG_SYS_CACHELINE_SIZE 32 16 17 #include <asm/arch/imx-regs.h> 18 19 #define CONFIG_VF610 20 #define CONFIG_SYS_THUMB_BUILD 21 #define CONFIG_USE_ARCH_MEMCPY 22 #define CONFIG_USE_ARCH_MEMSET 23 #define CONFIG_SYS_FSL_CLK 24 25 #define CONFIG_ARCH_MISC_INIT 26 #define CONFIG_DISPLAY_CPUINFO 27 #define CONFIG_DISPLAY_BOARDINFO 28 29 #define CONFIG_SKIP_LOWLEVEL_INIT 30 31 #define CONFIG_CMD_FUSE 32 #ifdef CONFIG_CMD_FUSE 33 #define CONFIG_MXC_OCOTP 34 #endif 35 36 /* Size of malloc() pool */ 37 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) 38 39 #define CONFIG_BOARD_EARLY_INIT_F 40 41 /* Allow to overwrite serial and ethaddr */ 42 #define CONFIG_ENV_OVERWRITE 43 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 44 #define CONFIG_VERSION_VARIABLE 45 #define CONFIG_BAUDRATE 115200 46 #define CONFIG_CMD_ASKENV 47 48 /* NAND support */ 49 #define CONFIG_CMD_NAND 50 #define CONFIG_SYS_NAND_ONFI_DETECTION 51 #define CONFIG_SYS_MAX_NAND_DEVICE 1 52 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR 53 54 /* Dynamic MTD partition support */ 55 #define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */ 56 #define CONFIG_MTD_PARTITIONS 57 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 58 #define MTDIDS_DEFAULT "nand0=vf610_nfc" 59 #define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \ 60 "128k(vf-bcb)ro," \ 61 "1408k(u-boot)ro," \ 62 "512k(u-boot-env)," \ 63 "-(ubi)" 64 65 #define CONFIG_MMC 66 #define CONFIG_FSL_ESDHC 67 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 68 #define CONFIG_SYS_FSL_ESDHC_NUM 1 69 70 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 71 72 #define CONFIG_CMD_MMC 73 #define CONFIG_GENERIC_MMC 74 #define CONFIG_CMD_FAT 75 #define CONFIG_CMD_EXT4 76 #define CONFIG_DOS_PARTITION 77 78 #define CONFIG_RBTREE 79 #define CONFIG_LZO 80 #define CONFIG_CMD_FS_GENERIC 81 #define CONFIG_CMD_BOOTZ 82 #define CONFIG_CMD_UBI 83 #define CONFIG_MTD_UBI_FASTMAP 84 #define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */ 85 86 #define CONFIG_CMD_PING 87 #define CONFIG_CMD_DHCP 88 #define CONFIG_CMD_MII 89 #define CONFIG_FEC_MXC 90 #define CONFIG_MII 91 #define IMX_FEC_BASE ENET1_BASE_ADDR 92 #define CONFIG_FEC_XCV_TYPE RMII 93 #define CONFIG_FEC_MXC_PHYADDR 0 94 #define CONFIG_PHYLIB 95 #define CONFIG_PHY_MICREL 96 97 #define CONFIG_IPADDR 192.168.10.2 98 #define CONFIG_NETMASK 255.255.255.0 99 #define CONFIG_SERVERIP 192.168.10.1 100 101 #define CONFIG_BOOTDELAY 1 102 #define CONFIG_BOARD_LATE_INIT 103 104 #define CONFIG_LOADADDR 0x80008000 105 #define CONFIG_FDTADDR 0x84000000 106 107 /* We boot from the gfxRAM area of the OCRAM. */ 108 #define CONFIG_SYS_TEXT_BASE 0x3f408000 109 #define CONFIG_BOARD_SIZE_LIMIT 524288 110 111 #define SD_BOOTCMD \ 112 "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \ 113 "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \ 114 "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \ 115 "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \ 116 "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \ 117 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 118 119 #define NFS_BOOTCMD \ 120 "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \ 121 "nfsboot=run setup; " \ 122 "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \ 123 "${setupargs} ${vidargs}; echo Booting from NFS...;" \ 124 "dhcp ${kernel_addr_r} && " \ 125 "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \ 126 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 127 128 #define UBI_BOOTCMD \ 129 "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \ 130 "ubi.fm_autoconvert=1\0" \ 131 "ubiboot=run setup; " \ 132 "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \ 133 "${setupargs} ${vidargs}; echo Booting from NAND...; " \ 134 "ubi part ubi && ubifsmount ubi0:rootfs && " \ 135 "ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \ 136 "ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \ 137 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 138 139 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot" 140 141 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4" 142 143 #define CONFIG_EXTRA_ENV_SETTINGS \ 144 "kernel_addr_r=0x82000000\0" \ 145 "fdt_addr_r=0x84000000\0" \ 146 "kernel_file=zImage\0" \ 147 "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \ 148 "fdt_board=eval-v3\0" \ 149 "defargs=\0" \ 150 "console=ttyLP0\0" \ 151 "setup=setenv setupargs " \ 152 "console=tty1 console=${console}" \ 153 ",${baudrate}n8 ${memargs}\0" \ 154 "setsdupdate=mmc rescan && set interface mmc && " \ 155 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \ 156 "source ${loadaddr}\0" \ 157 "setusbupdate=usb start && set interface usb && " \ 158 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \ 159 "source ${loadaddr}\0" \ 160 "setupdate=run setsdupdate || run setusbupdate\0" \ 161 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 162 "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \ 163 SD_BOOTCMD \ 164 NFS_BOOTCMD \ 165 UBI_BOOTCMD 166 167 /* Miscellaneous configurable options */ 168 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 169 #define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ 170 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 171 #undef CONFIG_AUTO_COMPLETE 172 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 173 #define CONFIG_SYS_PBSIZE \ 174 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 175 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 176 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 177 178 #define CONFIG_CMD_MEMTEST 179 #define CONFIG_SYS_MEMTEST_START 0x80010000 180 #define CONFIG_SYS_MEMTEST_END 0x87C00000 181 182 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 183 #define CONFIG_SYS_HZ 1000 184 #define CONFIG_CMDLINE_EDITING 185 186 /* 187 * Stack sizes 188 * The stack sizes are set up in start.S using the settings below 189 */ 190 #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ 191 192 /* Physical memory map */ 193 #define CONFIG_NR_DRAM_BANKS 1 194 #define PHYS_SDRAM (0x80000000) 195 #define PHYS_SDRAM_SIZE (256 * 1024 * 1024) 196 197 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 198 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 199 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 200 201 #define CONFIG_SYS_INIT_SP_OFFSET \ 202 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 203 #define CONFIG_SYS_INIT_SP_ADDR \ 204 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 205 206 /* Environment organization */ 207 #define CONFIG_SYS_NO_FLASH 208 209 #ifdef CONFIG_ENV_IS_IN_MMC 210 #define CONFIG_SYS_MMC_ENV_DEV 0 211 #define CONFIG_ENV_OFFSET (12 * 64 * 1024) 212 #define CONFIG_ENV_SIZE (8 * 1024) 213 #endif 214 215 #ifdef CONFIG_ENV_IS_IN_NAND 216 #define CONFIG_ENV_SIZE (64 * 2048) 217 #define CONFIG_ENV_RANGE (4 * 64 * 2048) 218 #define CONFIG_ENV_OFFSET (12 * 64 * 2048) 219 #endif 220 221 #define CONFIG_CMD_BOOTZ 222 223 #define CONFIG_SYS_NO_FLASH 224 225 #define CONFIG_SYS_CACHELINE_SIZE 32 226 227 /* USB Host Support */ 228 #define CONFIG_CMD_USB 229 #define CONFIG_USB_EHCI 230 #define CONFIG_USB_EHCI_VF 231 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 232 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 233 234 /* USB Client Support */ 235 #define CONFIG_TRDX_VID 0x1B67 236 #define CONFIG_TRDX_PID_COLIBRI_VF50 0x0016 237 #define CONFIG_TRDX_PID_COLIBRI_VF61 0x0017 238 #define CONFIG_TRDX_PID_COLIBRI_VF61IT 0x0018 239 #define CONFIG_TRDX_PID_COLIBRI_VF50IT 0x0019 240 241 /* USB DFU */ 242 #define CONFIG_CMD_DFU 243 #define CONFIG_USB_FUNCTION_DFU 244 #define CONFIG_DFU_NAND 245 #define CONFIG_DFU_MMC 246 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024) 247 248 /* USB Storage */ 249 #define CONFIG_USB_STORAGE 250 #define CONFIG_USB_FUNCTION_MASS_STORAGE 251 #define CONFIG_CMD_USB_MASS_STORAGE 252 253 #endif /* __CONFIG_H */ 254