1 /* 2 * Copyright 2015 Toradex, Inc. 3 * 4 * Configuration settings for the Toradex VF50/VF61 module. 5 * 6 * Based on vf610twr.h: 7 * Copyright 2013 Freescale Semiconductor, Inc. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef __CONFIG_H 13 #define __CONFIG_H 14 15 #include <asm/arch/imx-regs.h> 16 17 #define CONFIG_VF610 18 #define CONFIG_SYS_THUMB_BUILD 19 #define CONFIG_USE_ARCH_MEMCPY 20 #define CONFIG_USE_ARCH_MEMSET 21 #define CONFIG_SYS_FSL_CLK 22 23 #define CONFIG_ARCH_MISC_INIT 24 #define CONFIG_DISPLAY_CPUINFO 25 #define CONFIG_DISPLAY_BOARDINFO 26 27 #define CONFIG_SKIP_LOWLEVEL_INIT 28 29 #define CONFIG_CMD_FUSE 30 #ifdef CONFIG_CMD_FUSE 31 #define CONFIG_MXC_OCOTP 32 #endif 33 34 /* Size of malloc() pool */ 35 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024) 36 37 #define CONFIG_BOARD_EARLY_INIT_F 38 39 /* Allow to overwrite serial and ethaddr */ 40 #define CONFIG_ENV_OVERWRITE 41 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 42 #define CONFIG_VERSION_VARIABLE 43 #define CONFIG_BAUDRATE 115200 44 45 /* NAND support */ 46 #define CONFIG_CMD_NAND 47 #define CONFIG_SYS_NAND_ONFI_DETECTION 48 #define CONFIG_SYS_MAX_NAND_DEVICE 1 49 #define CONFIG_SYS_NAND_BASE NFC_BASE_ADDR 50 51 /* Dynamic MTD partition support */ 52 #define CONFIG_CMD_MTDPARTS /* Enable 'mtdparts' command line support */ 53 #define CONFIG_MTD_PARTITIONS 54 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 55 #define MTDIDS_DEFAULT "nand0=vf610_nfc" 56 #define MTDPARTS_DEFAULT "mtdparts=vf610_nfc:" \ 57 "128k(vf-bcb)ro," \ 58 "1408k(u-boot)ro," \ 59 "512k(u-boot-env)," \ 60 "-(ubi)" 61 62 #define CONFIG_MMC 63 #define CONFIG_FSL_ESDHC 64 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 65 #define CONFIG_SYS_FSL_ESDHC_NUM 1 66 67 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111 68 69 #define CONFIG_GENERIC_MMC 70 #define CONFIG_DOS_PARTITION 71 72 #define CONFIG_RBTREE 73 #define CONFIG_LZO 74 #define CONFIG_CMD_UBI 75 #define CONFIG_MTD_UBI_FASTMAP 76 #define CONFIG_CMD_UBIFS /* increases size by almost 60 KB */ 77 78 #define CONFIG_FEC_MXC 79 #define CONFIG_MII 80 #define IMX_FEC_BASE ENET1_BASE_ADDR 81 #define CONFIG_FEC_XCV_TYPE RMII 82 #define CONFIG_FEC_MXC_PHYADDR 0 83 #define CONFIG_PHYLIB 84 #define CONFIG_PHY_MICREL 85 86 #define CONFIG_IPADDR 192.168.10.2 87 #define CONFIG_NETMASK 255.255.255.0 88 #define CONFIG_SERVERIP 192.168.10.1 89 90 #define CONFIG_BOARD_LATE_INIT 91 92 #define CONFIG_LOADADDR 0x80008000 93 #define CONFIG_FDTADDR 0x84000000 94 95 /* We boot from the gfxRAM area of the OCRAM. */ 96 #define CONFIG_SYS_TEXT_BASE 0x3f408000 97 #define CONFIG_BOARD_SIZE_LIMIT 524288 98 99 #define SD_BOOTCMD \ 100 "sdargs=root=/dev/mmcblk0p2 rw rootwait\0" \ 101 "sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${mtdparts} " \ 102 "${setupargs} ${vidargs}; echo Booting from MMC/SD card...; " \ 103 "load mmc 0:2 ${kernel_addr_r} /boot/${kernel_file} && " \ 104 "load mmc 0:2 ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \ 105 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 106 107 #define NFS_BOOTCMD \ 108 "nfsargs=ip=:::::eth0: root=/dev/nfs\0" \ 109 "nfsboot=run setup; " \ 110 "setenv bootargs ${defargs} ${nfsargs} ${mtdparts} " \ 111 "${setupargs} ${vidargs}; echo Booting from NFS...;" \ 112 "dhcp ${kernel_addr_r} && " \ 113 "tftp ${fdt_addr_r} ${soc}-colibri-${fdt_board}.dtb && " \ 114 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 115 116 #define UBI_BOOTCMD \ 117 "ubiargs=ubi.mtd=ubi root=ubi0:rootfs rootfstype=ubifs " \ 118 "ubi.fm_autoconvert=1\0" \ 119 "ubiboot=run setup; " \ 120 "setenv bootargs ${defargs} ${ubiargs} ${mtdparts} " \ 121 "${setupargs} ${vidargs}; echo Booting from NAND...; " \ 122 "ubi part ubi && ubifsmount ubi0:rootfs && " \ 123 "ubifsload ${kernel_addr_r} /boot/${kernel_file} && " \ 124 "ubifsload ${fdt_addr_r} /boot/${soc}-colibri-${fdt_board}.dtb && " \ 125 "bootz ${kernel_addr_r} - ${fdt_addr_r}\0" \ 126 127 #define CONFIG_BOOTCOMMAND "run ubiboot; run sdboot; run nfsboot" 128 129 #define DFU_ALT_NAND_INFO "vf-bcb part 0,1;u-boot part 0,2;ubi part 0,4" 130 131 #define CONFIG_EXTRA_ENV_SETTINGS \ 132 "kernel_addr_r=0x82000000\0" \ 133 "fdt_addr_r=0x84000000\0" \ 134 "kernel_file=zImage\0" \ 135 "fdt_file=${soc}-colibri-${fdt_board}.dtb\0" \ 136 "fdt_board=eval-v3\0" \ 137 "defargs=\0" \ 138 "console=ttyLP0\0" \ 139 "setup=setenv setupargs " \ 140 "console=tty1 console=${console}" \ 141 ",${baudrate}n8 ${memargs}\0" \ 142 "setsdupdate=mmc rescan && set interface mmc && " \ 143 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \ 144 "source ${loadaddr}\0" \ 145 "setusbupdate=usb start && set interface usb && " \ 146 "fatload ${interface} 0:1 ${loadaddr} flash_blk.img && " \ 147 "source ${loadaddr}\0" \ 148 "setupdate=run setsdupdate || run setusbupdate\0" \ 149 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 150 "dfu_alt_info=" DFU_ALT_NAND_INFO "\0" \ 151 SD_BOOTCMD \ 152 NFS_BOOTCMD \ 153 UBI_BOOTCMD 154 155 /* Miscellaneous configurable options */ 156 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 157 #undef CONFIG_AUTO_COMPLETE 158 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 159 #define CONFIG_SYS_PBSIZE \ 160 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 161 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 162 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 163 164 #define CONFIG_SYS_MEMTEST_START 0x80010000 165 #define CONFIG_SYS_MEMTEST_END 0x87C00000 166 167 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 168 #define CONFIG_SYS_HZ 1000 169 #define CONFIG_CMDLINE_EDITING 170 171 /* 172 * Stack sizes 173 * The stack sizes are set up in start.S using the settings below 174 */ 175 #define CONFIG_STACKSIZE (128 * 1024) /* regular stack */ 176 177 /* Physical memory map */ 178 #define CONFIG_NR_DRAM_BANKS 1 179 #define PHYS_SDRAM (0x80000000) 180 #define PHYS_SDRAM_SIZE (256 * 1024 * 1024) 181 182 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 183 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 184 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 185 186 #define CONFIG_SYS_INIT_SP_OFFSET \ 187 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 188 #define CONFIG_SYS_INIT_SP_ADDR \ 189 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 190 191 /* Environment organization */ 192 #define CONFIG_SYS_NO_FLASH 193 194 #ifdef CONFIG_ENV_IS_IN_MMC 195 #define CONFIG_SYS_MMC_ENV_DEV 0 196 #define CONFIG_ENV_OFFSET (12 * 64 * 1024) 197 #define CONFIG_ENV_SIZE (8 * 1024) 198 #endif 199 200 #ifdef CONFIG_ENV_IS_IN_NAND 201 #define CONFIG_ENV_SIZE (64 * 2048) 202 #define CONFIG_ENV_RANGE (4 * 64 * 2048) 203 #define CONFIG_ENV_OFFSET (12 * 64 * 2048) 204 #endif 205 206 #define CONFIG_SYS_NO_FLASH 207 208 /* USB Host Support */ 209 #define CONFIG_USB_EHCI 210 #define CONFIG_USB_EHCI_VF 211 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 212 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 213 214 /* USB Client Support */ 215 #define CONFIG_TRDX_VID 0x1B67 216 #define CONFIG_TRDX_PID_COLIBRI_VF50 0x0016 217 #define CONFIG_TRDX_PID_COLIBRI_VF61 0x0017 218 #define CONFIG_TRDX_PID_COLIBRI_VF61IT 0x0018 219 #define CONFIG_TRDX_PID_COLIBRI_VF50IT 0x0019 220 221 /* USB DFU */ 222 #define CONFIG_USB_FUNCTION_DFU 223 #define CONFIG_DFU_NAND 224 #define CONFIG_DFU_MMC 225 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1024 * 1024) 226 227 /* USB Storage */ 228 #define CONFIG_USB_STORAGE 229 #define CONFIG_USB_FUNCTION_MASS_STORAGE 230 231 #endif /* __CONFIG_H */ 232