1 /* 2 * (C) Copyright 2013 Atmel Corporation. 3 * Josh Wu <josh.wu@atmel.com> 4 * 5 * Configuation settings for the AT91SAM9N12-EK boards. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __AT91SAM9N12_CONFIG_H_ 11 #define __AT91SAM9N12_CONFIG_H_ 12 13 /* 14 * SoC must be defined first, before hardware.h is included. 15 * In this case SoC is defined in boards.cfg. 16 */ 17 #include <asm/hardware.h> 18 19 #define CONFIG_SYS_TEXT_BASE 0x26f00000 20 21 #define CONFIG_ARM926EJS 22 #define CONFIG_AT91FAMILY 23 24 /* ARM asynchronous clock */ 25 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ 26 #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000 /* main clock xtal */ 27 #define CONFIG_SYS_HZ 1000 28 29 /* Misc CPU related */ 30 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 31 #define CONFIG_SETUP_MEMORY_TAGS 32 #define CONFIG_INITRD_TAG 33 #define CONFIG_SKIP_LOWLEVEL_INIT 34 #define CONFIG_BOARD_EARLY_INIT_F 35 #define CONFIG_DISPLAY_CPUINFO 36 37 #define CONFIG_OF_LIBFDT 38 39 /* general purpose I/O */ 40 #define CONFIG_AT91_GPIO 41 42 /* serial console */ 43 #define CONFIG_ATMEL_USART 44 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 45 #define CONFIG_USART_ID ATMEL_ID_SYS 46 #define CONFIG_BAUDRATE 115200 47 48 /* LCD */ 49 #define CONFIG_LCD 50 #define LCD_BPP LCD_COLOR16 51 #define LCD_OUTPUT_BPP 24 52 #define CONFIG_LCD_LOGO 53 #define CONFIG_LCD_INFO 54 #define CONFIG_LCD_INFO_BELOW_LOGO 55 #define CONFIG_SYS_WHITE_ON_BLACK 56 #define CONFIG_ATMEL_HLCD 57 #define CONFIG_ATMEL_LCD_RGB565 58 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 59 60 #define CONFIG_BOOTDELAY 3 61 62 /* 63 * BOOTP options 64 */ 65 #define CONFIG_BOOTP_BOOTFILESIZE 66 #define CONFIG_BOOTP_BOOTPATH 67 #define CONFIG_BOOTP_GATEWAY 68 #define CONFIG_BOOTP_HOSTNAME 69 70 /* NOR flash - no real flash on this board */ 71 #define CONFIG_SYS_NO_FLASH 72 73 /* 74 * Command line configuration. 75 */ 76 #include <config_cmd_default.h> 77 #undef CONFIG_CMD_FPGA 78 79 #define CONFIG_CMD_BOOTZ 80 #define CONFIG_CMD_PING 81 #define CONFIG_CMD_DHCP 82 #define CONFIG_CMD_NAND 83 #define CONFIG_CMD_SF 84 #define CONFIG_CMD_MMC 85 #define CONFIG_CMD_FAT 86 #define CONFIG_CMD_USB 87 88 #define CONFIG_NR_DRAM_BANKS 1 89 #define CONFIG_SYS_SDRAM_BASE 0x20000000 90 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 91 92 /* 93 * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, 94 * leaving the correct space for initial global data structure above 95 * that address while providing maximum stack area below. 96 */ 97 # define CONFIG_SYS_INIT_SP_ADDR \ 98 (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE) 99 100 /* DataFlash */ 101 #ifdef CONFIG_CMD_SF 102 #define CONFIG_ATMEL_SPI 103 #define CONFIG_SPI_FLASH 104 #define CONFIG_SPI_FLASH_ATMEL 105 #define CONFIG_SF_DEFAULT_SPEED 30000000 106 #define CONFIG_ENV_SPI_MODE SPI_MODE_3 107 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 108 #endif 109 110 /* NAND flash */ 111 #ifdef CONFIG_CMD_NAND 112 #define CONFIG_NAND_ATMEL 113 #define CONFIG_SYS_MAX_NAND_DEVICE 1 114 #define CONFIG_SYS_NAND_BASE 0x40000000 115 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 116 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 117 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIO_PORTD, 4 118 #define CONFIG_SYS_NAND_READY_PIN AT91_PIO_PORTD, 5 119 120 /* PMECC & PMERRLOC */ 121 #define CONFIG_ATMEL_NAND_HWECC 122 #define CONFIG_ATMEL_NAND_HW_PMECC 123 #define CONFIG_PMECC_CAP 2 124 #define CONFIG_PMECC_SECTOR_SIZE 512 125 #define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000 126 127 #define CONFIG_CMD_NAND_TRIMFFS 128 129 #endif 130 131 #define CONFIG_MTD_PARTITIONS 132 #define CONFIG_MTD_DEVICE 133 #define CONFIG_CMD_MTDPARTS 134 #define MTDIDS_DEFAULT "nand0=atmel_nand" 135 #define MTDPARTS_DEFAULT \ 136 "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ 137 "256k(env),256k(env_redundant),256k(spare)," \ 138 "512k(dtb),6M(kernel)ro,-(rootfs)" 139 140 #define CONFIG_EXTRA_ENV_SETTINGS \ 141 "console=console=ttyS0,115200\0" \ 142 "mtdparts="MTDPARTS_DEFAULT"\0" \ 143 "bootargs_nand=rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw\0"\ 144 "bootargs_mmc=root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\0" 145 146 /* MMC */ 147 #ifdef CONFIG_CMD_MMC 148 #define CONFIG_MMC 149 #define CONFIG_GENERIC_MMC 150 #define CONFIG_GENERIC_ATMEL_MCI 151 #endif 152 153 /* FAT */ 154 #ifdef CONFIG_CMD_FAT 155 #define CONFIG_DOS_PARTITION 156 #endif 157 158 /* Ethernet */ 159 #define CONFIG_KS8851_MLL 160 #define CONFIG_KS8851_MLL_BASEADDR 0x30000000 /* use NCS2 */ 161 162 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ 163 164 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 165 #define CONFIG_SYS_MEMTEST_END 0x26e00000 166 167 /* USB host */ 168 #ifdef CONFIG_CMD_USB 169 #define CONFIG_USB_ATMEL 170 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB 171 #define CONFIG_USB_OHCI_NEW 172 #define CONFIG_SYS_USB_OHCI_CPU_INIT 173 #define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI 174 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9n12" 175 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 176 #define CONFIG_USB_STORAGE 177 #endif 178 179 #ifdef CONFIG_SYS_USE_SPIFLASH 180 181 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ 182 #define CONFIG_ENV_IS_IN_SPI_FLASH 183 #define CONFIG_ENV_OFFSET 0x5000 184 #define CONFIG_ENV_SIZE 0x3000 185 #define CONFIG_ENV_SECT_SIZE 0x1000 186 #define CONFIG_BOOTCOMMAND \ 187 "setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \ 188 "sf probe 0; sf read 0x22000000 0x100000 0x300000; " \ 189 "bootm 0x22000000" 190 191 #elif defined(CONFIG_SYS_USE_NANDFLASH) 192 193 /* bootstrap + u-boot + env + linux in nandflash */ 194 #define CONFIG_ENV_IS_IN_NAND 195 #define CONFIG_ENV_OFFSET 0xc0000 196 #define CONFIG_ENV_OFFSET_REDUND 0x100000 197 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ 198 #define CONFIG_BOOTCOMMAND \ 199 "setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \ 200 "nand read 0x21000000 0x180000 0x080000;" \ 201 "nand read 0x22000000 0x200000 0x400000;" \ 202 "bootm 0x22000000 - 0x21000000" 203 204 #else /* CONFIG_SYS_USE_MMC */ 205 206 /* bootstrap + u-boot + env + linux in mmc */ 207 #define CONFIG_ENV_IS_IN_MMC 208 /* For FAT system, most cases it should be in the reserved sector */ 209 #define CONFIG_ENV_OFFSET 0x2000 210 #define CONFIG_ENV_SIZE 0x1000 211 #define CONFIG_SYS_MMC_ENV_DEV 0 212 #define CONFIG_BOOTCOMMAND \ 213 "setenv bootargs ${console} ${mtdparts} ${bootargs_mmc};" \ 214 "fatload mmc 0:1 0x21000000 dtb;" \ 215 "fatload mmc 0:1 0x22000000 uImage;" \ 216 "bootm 0x22000000 - 0x21000000" 217 218 #endif 219 220 #define CONFIG_SYS_PROMPT "U-Boot> " 221 #define CONFIG_SYS_CBSIZE 256 222 #define CONFIG_SYS_MAXARGS 16 223 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \ 224 + 16) 225 #define CONFIG_SYS_LONGHELP 226 #define CONFIG_CMDLINE_EDITING 227 #define CONFIG_AUTO_COMPLETE 228 #define CONFIG_SYS_HUSH_PARSER 229 230 /* 231 * Size of malloc() pool 232 */ 233 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 234 #define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ 235 236 #endif 237