1 /* 2 * (C) Copyright 2013 Atmel Corporation. 3 * Josh Wu <josh.wu@atmel.com> 4 * 5 * Configuation settings for the AT91SAM9N12-EK boards. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __AT91SAM9N12_CONFIG_H_ 11 #define __AT91SAM9N12_CONFIG_H_ 12 13 /* 14 * SoC must be defined first, before hardware.h is included. 15 * In this case SoC is defined in boards.cfg. 16 */ 17 #include <asm/hardware.h> 18 19 #define CONFIG_SYS_TEXT_BASE 0x26f00000 20 21 #define CONFIG_ARM926EJS 22 23 /* ARM asynchronous clock */ 24 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 /* slow clock xtal */ 25 #define CONFIG_SYS_AT91_MAIN_CLOCK 16000000 /* main clock xtal */ 26 27 /* Misc CPU related */ 28 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 29 #define CONFIG_SETUP_MEMORY_TAGS 30 #define CONFIG_INITRD_TAG 31 #define CONFIG_SKIP_LOWLEVEL_INIT 32 #define CONFIG_BOARD_EARLY_INIT_F 33 #define CONFIG_DISPLAY_CPUINFO 34 35 #define CONFIG_OF_LIBFDT 36 37 /* general purpose I/O */ 38 #define CONFIG_AT91_GPIO 39 40 /* serial console */ 41 #define CONFIG_ATMEL_USART 42 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 43 #define CONFIG_USART_ID ATMEL_ID_SYS 44 #define CONFIG_BAUDRATE 115200 45 46 /* LCD */ 47 #define CONFIG_LCD 48 #define LCD_BPP LCD_COLOR16 49 #define LCD_OUTPUT_BPP 24 50 #define CONFIG_LCD_LOGO 51 #define CONFIG_LCD_INFO 52 #define CONFIG_LCD_INFO_BELOW_LOGO 53 #define CONFIG_SYS_WHITE_ON_BLACK 54 #define CONFIG_ATMEL_HLCD 55 #define CONFIG_ATMEL_LCD_RGB565 56 #define CONFIG_SYS_CONSOLE_IS_IN_ENV 57 58 #define CONFIG_BOOTDELAY 3 59 60 /* 61 * BOOTP options 62 */ 63 #define CONFIG_BOOTP_BOOTFILESIZE 64 #define CONFIG_BOOTP_BOOTPATH 65 #define CONFIG_BOOTP_GATEWAY 66 #define CONFIG_BOOTP_HOSTNAME 67 68 /* NOR flash - no real flash on this board */ 69 #define CONFIG_SYS_NO_FLASH 70 71 /* 72 * Command line configuration. 73 */ 74 #include <config_cmd_default.h> 75 #undef CONFIG_CMD_FPGA 76 77 #define CONFIG_CMD_BOOTZ 78 #define CONFIG_CMD_PING 79 #define CONFIG_CMD_DHCP 80 #define CONFIG_CMD_NAND 81 #define CONFIG_CMD_SF 82 #define CONFIG_CMD_MMC 83 #define CONFIG_CMD_FAT 84 #define CONFIG_CMD_USB 85 86 #define CONFIG_NR_DRAM_BANKS 1 87 #define CONFIG_SYS_SDRAM_BASE 0x20000000 88 #define CONFIG_SYS_SDRAM_SIZE 0x08000000 89 90 /* 91 * Initial stack pointer: 4k - GENERATED_GBL_DATA_SIZE in internal SRAM, 92 * leaving the correct space for initial global data structure above 93 * that address while providing maximum stack area below. 94 */ 95 # define CONFIG_SYS_INIT_SP_ADDR \ 96 (ATMEL_BASE_SRAM + 0x1000 - GENERATED_GBL_DATA_SIZE) 97 98 /* DataFlash */ 99 #ifdef CONFIG_CMD_SF 100 #define CONFIG_ATMEL_SPI 101 #define CONFIG_SPI_FLASH 102 #define CONFIG_SPI_FLASH_ATMEL 103 #define CONFIG_SF_DEFAULT_SPEED 30000000 104 #define CONFIG_ENV_SPI_MODE SPI_MODE_3 105 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 106 #endif 107 108 /* NAND flash */ 109 #ifdef CONFIG_CMD_NAND 110 #define CONFIG_NAND_ATMEL 111 #define CONFIG_SYS_MAX_NAND_DEVICE 1 112 #define CONFIG_SYS_NAND_BASE 0x40000000 113 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 114 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 115 #define CONFIG_SYS_NAND_ENABLE_PIN GPIO_PIN_PD(4) 116 #define CONFIG_SYS_NAND_READY_PIN GPIO_PIN_PD(5) 117 118 /* PMECC & PMERRLOC */ 119 #define CONFIG_ATMEL_NAND_HWECC 120 #define CONFIG_ATMEL_NAND_HW_PMECC 121 #define CONFIG_PMECC_CAP 2 122 #define CONFIG_PMECC_SECTOR_SIZE 512 123 #define CONFIG_PMECC_INDEX_TABLE_OFFSET 0x8000 124 125 #define CONFIG_CMD_NAND_TRIMFFS 126 127 #endif 128 129 #define CONFIG_MTD_PARTITIONS 130 #define CONFIG_MTD_DEVICE 131 #define CONFIG_CMD_MTDPARTS 132 #define MTDIDS_DEFAULT "nand0=atmel_nand" 133 #define MTDPARTS_DEFAULT \ 134 "mtdparts=atmel_nand:256k(bootstrap)ro,512k(uboot)ro," \ 135 "256k(env),256k(env_redundant),256k(spare)," \ 136 "512k(dtb),6M(kernel)ro,-(rootfs)" 137 138 #define CONFIG_EXTRA_ENV_SETTINGS \ 139 "console=console=ttyS0,115200\0" \ 140 "mtdparts="MTDPARTS_DEFAULT"\0" \ 141 "bootargs_nand=rootfstype=ubifs ubi.mtd=7 root=ubi0:rootfs rw\0"\ 142 "bootargs_mmc=root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait\0" 143 144 /* MMC */ 145 #ifdef CONFIG_CMD_MMC 146 #define CONFIG_MMC 147 #define CONFIG_GENERIC_MMC 148 #define CONFIG_GENERIC_ATMEL_MCI 149 #endif 150 151 /* FAT */ 152 #ifdef CONFIG_CMD_FAT 153 #define CONFIG_DOS_PARTITION 154 #endif 155 156 /* Ethernet */ 157 #define CONFIG_KS8851_MLL 158 #define CONFIG_KS8851_MLL_BASEADDR 0x30000000 /* use NCS2 */ 159 160 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ 161 162 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 163 #define CONFIG_SYS_MEMTEST_END 0x26e00000 164 165 /* USB host */ 166 #ifdef CONFIG_CMD_USB 167 #define CONFIG_USB_ATMEL 168 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB 169 #define CONFIG_USB_OHCI_NEW 170 #define CONFIG_SYS_USB_OHCI_CPU_INIT 171 #define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_BASE_OHCI 172 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9n12" 173 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1 174 #define CONFIG_USB_STORAGE 175 #endif 176 177 #ifdef CONFIG_SYS_USE_SPIFLASH 178 179 /* bootstrap + u-boot + env + linux in dataflash on CS0 */ 180 #define CONFIG_ENV_IS_IN_SPI_FLASH 181 #define CONFIG_ENV_OFFSET 0x5000 182 #define CONFIG_ENV_SIZE 0x3000 183 #define CONFIG_ENV_SECT_SIZE 0x1000 184 #define CONFIG_BOOTCOMMAND \ 185 "setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \ 186 "sf probe 0; sf read 0x22000000 0x100000 0x300000; " \ 187 "bootm 0x22000000" 188 189 #elif defined(CONFIG_SYS_USE_NANDFLASH) 190 191 /* bootstrap + u-boot + env + linux in nandflash */ 192 #define CONFIG_ENV_IS_IN_NAND 193 #define CONFIG_ENV_OFFSET 0xc0000 194 #define CONFIG_ENV_OFFSET_REDUND 0x100000 195 #define CONFIG_ENV_SIZE 0x20000 /* 1 sector = 128 kB */ 196 #define CONFIG_BOOTCOMMAND \ 197 "setenv bootargs ${console} ${mtdparts} ${bootargs_nand};" \ 198 "nand read 0x21000000 0x180000 0x080000;" \ 199 "nand read 0x22000000 0x200000 0x400000;" \ 200 "bootm 0x22000000 - 0x21000000" 201 202 #else /* CONFIG_SYS_USE_MMC */ 203 204 /* bootstrap + u-boot + env + linux in mmc */ 205 #define CONFIG_ENV_IS_IN_MMC 206 /* For FAT system, most cases it should be in the reserved sector */ 207 #define CONFIG_ENV_OFFSET 0x2000 208 #define CONFIG_ENV_SIZE 0x1000 209 #define CONFIG_SYS_MMC_ENV_DEV 0 210 #define CONFIG_BOOTCOMMAND \ 211 "setenv bootargs ${console} ${mtdparts} ${bootargs_mmc};" \ 212 "fatload mmc 0:1 0x21000000 dtb;" \ 213 "fatload mmc 0:1 0x22000000 uImage;" \ 214 "bootm 0x22000000 - 0x21000000" 215 216 #endif 217 218 #define CONFIG_SYS_PROMPT "U-Boot> " 219 #define CONFIG_SYS_CBSIZE 256 220 #define CONFIG_SYS_MAXARGS 16 221 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) \ 222 + 16) 223 #define CONFIG_SYS_LONGHELP 224 #define CONFIG_CMDLINE_EDITING 225 #define CONFIG_AUTO_COMPLETE 226 #define CONFIG_SYS_HUSH_PARSER 227 228 /* 229 * Size of malloc() pool 230 */ 231 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 232 #define CONFIG_STACKSIZE (32 * 1024) /* regular stack */ 233 234 #endif 235