1 /* 2 * am43xx_evm.h 3 * 4 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/ 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_AM43XX_EVM_H 10 #define __CONFIG_AM43XX_EVM_H 11 12 #define CONFIG_AM43XX 13 14 #define CONFIG_CMD_FAT 15 16 #define CONFIG_BOARD_LATE_INIT 17 #define CONFIG_ARCH_CPU_INIT 18 #define CONFIG_SYS_CACHELINE_SIZE 32 19 #define CONFIG_MAX_RAM_BANK_SIZE (1024 << 21) /* 2GB */ 20 #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */ 21 22 #include <asm/arch/omap.h> 23 24 /* NS16550 Configuration */ 25 #define CONFIG_SYS_NS16550_CLK 48000000 26 #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_DM_SERIAL) 27 #define CONFIG_SYS_NS16550_SERIAL 28 #define CONFIG_SYS_NS16550_REG_SIZE (-4) 29 #endif 30 31 /* I2C Configuration */ 32 #define CONFIG_CMD_EEPROM 33 #define CONFIG_ENV_EEPROM_IS_ON_I2C 34 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ 35 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 36 37 /* Power */ 38 #define CONFIG_POWER 39 #define CONFIG_POWER_I2C 40 #define CONFIG_POWER_TPS65218 41 #define CONFIG_POWER_TPS62362 42 43 /* SPL defines. */ 44 #ifdef CONFIG_SPL_USB_HOST_SUPPORT 45 /* 46 * For USB host boot, ROM uses DMA for copying MLO from USB storage 47 * and ARM internal ram is not accessible for DMA, so SPL text base 48 * should be in OCMC ram 49 */ 50 #define CONFIG_SPL_TEXT_BASE 0x40300350 51 #else 52 #define CONFIG_SPL_TEXT_BASE 0x402F4000 53 #endif 54 #define CONFIG_SPL_MAX_SIZE (220 << 10) /* 220KB */ 55 #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ 56 (128 << 20)) 57 #define CONFIG_SPL_POWER_SUPPORT 58 #define CONFIG_SPL_YMODEM_SUPPORT 59 60 /* Enabling L2 Cache */ 61 #define CONFIG_SYS_L2_PL310 62 #define CONFIG_SYS_PL310_BASE 0x48242000 63 #define CONFIG_SYS_CACHELINE_SIZE 32 64 65 /* 66 * Since SPL did pll and ddr initialization for us, 67 * we don't need to do it twice. 68 */ 69 #if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_QSPI_BOOT) 70 #define CONFIG_SKIP_LOWLEVEL_INIT 71 #endif 72 73 /* 74 * When building U-Boot such that there is no previous loader 75 * we need to call board_early_init_f. This is taken care of in 76 * s_init when we have SPL used. 77 */ 78 #if !defined(CONFIG_SKIP_LOWLEVEL_INIT) && !defined(CONFIG_SPL) 79 #define CONFIG_BOARD_EARLY_INIT_F 80 #endif 81 82 /* Now bring in the rest of the common code. */ 83 #include <configs/ti_armv7_omap.h> 84 85 /* Always 64 KiB env size */ 86 #define CONFIG_ENV_SIZE (64 << 10) 87 88 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG 89 90 /* Clock Defines */ 91 #define V_OSCK 24000000 /* Clock output from T2 */ 92 #define V_SCLK (V_OSCK) 93 94 /* NS16550 Configuration */ 95 #define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ 96 97 #define CONFIG_ENV_IS_IN_FAT 98 #define FAT_ENV_INTERFACE "mmc" 99 #define FAT_ENV_DEVICE_AND_PART "0:1" 100 #define FAT_ENV_FILE "uboot.env" 101 #define CONFIG_FAT_WRITE 102 103 #define CONFIG_SPL_LDSCRIPT "$(CPUDIR)/omap-common/u-boot-spl.lds" 104 105 /* SPL USB Support */ 106 #ifdef CONFIG_SPL_USB_HOST_SUPPORT 107 #define CONFIG_SPL_USB_SUPPORT 108 #endif 109 110 #if defined(CONFIG_SPL_USB_HOST_SUPPORT) || !defined(CONFIG_SPL_BUILD) 111 #define CONFIG_SYS_USB_FAT_BOOT_PARTITION 1 112 #define CONFIG_CMD_USB 113 #define CONFIG_USB_HOST 114 #define CONFIG_USB_XHCI 115 #define CONFIG_USB_XHCI_DWC3 116 #define CONFIG_USB_XHCI_OMAP 117 #define CONFIG_USB_STORAGE 118 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 2 119 120 #define CONFIG_OMAP_USB_PHY 121 #define CONFIG_AM437X_USB2PHY2_HOST 122 #endif 123 124 /* USB GADGET */ 125 #if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USBETH_SUPPORT) 126 #undef CONFIG_USB_DWC3_PHY_OMAP 127 #undef CONFIG_USB_DWC3_OMAP 128 #undef CONFIG_USB_DWC3 129 #undef CONFIG_USB_DWC3_GADGET 130 131 #undef CONFIG_USB_GADGET_DOWNLOAD 132 #undef CONFIG_USB_GADGET_VBUS_DRAW 133 #undef CONFIG_USB_GADGET_DUALSPEED 134 #endif 135 136 #if !defined(CONFIG_SPL_BUILD) || \ 137 (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)) 138 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" 139 #define CONFIG_G_DNL_VENDOR_NUM 0x0403 140 #define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 141 #endif 142 143 /* 144 * Disable MMC DM for SPL build and can be re-enabled after adding 145 * DM support in SPL 146 */ 147 #ifdef CONFIG_SPL_BUILD 148 #undef CONFIG_DM_MMC 149 #undef CONFIG_DM_SPI 150 #undef CONFIG_DM_SPI_FLASH 151 #undef CONFIG_TIMER 152 #endif 153 154 #ifndef CONFIG_SPL_BUILD 155 /* USB Device Firmware Update support */ 156 #define CONFIG_USB_FUNCTION_DFU 157 #define CONFIG_DFU_RAM 158 #define CONFIG_CMD_DFU 159 160 #define CONFIG_DFU_MMC 161 #define DFU_ALT_INFO_MMC \ 162 "dfu_alt_info_mmc=" \ 163 "boot part 0 1;" \ 164 "rootfs part 0 2;" \ 165 "MLO fat 0 1;" \ 166 "spl-os-args fat 0 1;" \ 167 "spl-os-image fat 0 1;" \ 168 "u-boot.img fat 0 1;" \ 169 "uEnv.txt fat 0 1\0" 170 171 #define DFU_ALT_INFO_EMMC \ 172 "dfu_alt_info_emmc=" \ 173 "MLO raw 0x100 0x100 mmcpart 0;" \ 174 "u-boot.img raw 0x300 0x1000 mmcpart 0\0" 175 176 #define CONFIG_DFU_RAM 177 #define DFU_ALT_INFO_RAM \ 178 "dfu_alt_info_ram=" \ 179 "kernel ram 0x80200000 0x4000000;" \ 180 "fdt ram 0x80f80000 0x80000;" \ 181 "ramdisk ram 0x81000000 0x4000000\0" 182 183 #define CONFIG_DFU_SF 184 #define DFU_ALT_INFO_QSPI \ 185 "dfu_alt_info_qspi=" \ 186 "u-boot.bin raw 0x0 0x080000;" \ 187 "u-boot.backup raw 0x080000 0x080000;" \ 188 "u-boot-spl-os raw 0x100000 0x010000;" \ 189 "u-boot-env raw 0x110000 0x010000;" \ 190 "u-boot-env.backup raw 0x120000 0x010000;" \ 191 "kernel raw 0x130000 0x800000\0" 192 193 #define DFUARGS \ 194 "dfu_bufsiz=0x10000\0" \ 195 DFU_ALT_INFO_MMC \ 196 DFU_ALT_INFO_EMMC \ 197 DFU_ALT_INFO_RAM \ 198 DFU_ALT_INFO_QSPI 199 #else 200 #define DFUARGS 201 #endif 202 203 #ifdef CONFIG_QSPI_BOOT 204 #define CONFIG_SYS_TEXT_BASE 0x30000000 205 #undef CONFIG_ENV_IS_IN_FAT 206 #define CONFIG_ENV_IS_IN_SPI_FLASH 207 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 208 #define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED 209 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64 KB sectors */ 210 #define CONFIG_ENV_OFFSET 0x110000 211 #define CONFIG_ENV_OFFSET_REDUND 0x120000 212 #ifdef MTDIDS_DEFAULT 213 #undef MTDIDS_DEFAULT 214 #endif 215 #ifdef MTDPARTS_DEFAULT 216 #undef MTDPARTS_DEFAULT 217 #endif 218 #define MTDPARTS_DEFAULT "mtdparts=qspi.0:512k(QSPI.u-boot)," \ 219 "512k(QSPI.u-boot.backup)," \ 220 "512k(QSPI.u-boot-spl-os)," \ 221 "64k(QSPI.u-boot-env)," \ 222 "64k(QSPI.u-boot-env.backup)," \ 223 "8m(QSPI.kernel)," \ 224 "-(QSPI.file-system)" 225 #endif 226 227 /* SPI */ 228 #undef CONFIG_OMAP3_SPI 229 #define CONFIG_CMD_SF 230 #define CONFIG_CMD_SPI 231 #define CONFIG_TI_SPI_MMAP 232 #define CONFIG_QSPI_SEL_GPIO 48 233 #define CONFIG_SF_DEFAULT_SPEED 48000000 234 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 235 #define CONFIG_QSPI_QUAD_SUPPORT 236 #define CONFIG_TI_EDMA3 237 238 /* Enhance our eMMC support / experience. */ 239 #define CONFIG_CMD_GPT 240 #define CONFIG_EFI_PARTITION 241 242 #ifndef CONFIG_SPL_BUILD 243 #define CONFIG_EXTRA_ENV_SETTINGS \ 244 DEFAULT_LINUX_BOOT_ENV \ 245 DEFAULT_MMC_TI_ARGS \ 246 "fdtfile=undefined\0" \ 247 "bootpart=0:2\0" \ 248 "bootdir=/boot\0" \ 249 "bootfile=zImage\0" \ 250 "console=ttyO0,115200n8\0" \ 251 "partitions=" \ 252 "uuid_disk=${uuid_gpt_disk};" \ 253 "name=rootfs,start=2MiB,size=-,uuid=${uuid_gpt_rootfs}\0" \ 254 "optargs=\0" \ 255 "usbroot=/dev/sda2 rw\0" \ 256 "usbrootfstype=ext4 rootwait\0" \ 257 "usbdev=0\0" \ 258 "ramroot=/dev/ram0 rw\0" \ 259 "ramrootfstype=ext2\0" \ 260 "usbargs=setenv bootargs console=${console} " \ 261 "${optargs} " \ 262 "root=${usbroot} " \ 263 "rootfstype=${usbrootfstype}\0" \ 264 "ramargs=setenv bootargs console=${console} " \ 265 "${optargs} " \ 266 "root=${ramroot} " \ 267 "rootfstype=${ramrootfstype}\0" \ 268 "loadramdisk=load ${devtype} ${devnum} ${rdaddr} ramdisk.gz\0" \ 269 "loadimage=load ${devtype} ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \ 270 "loadfdt=load ${devtype} ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \ 271 "mmcboot=mmc dev ${mmcdev}; " \ 272 "setenv devnum ${mmcdev}; " \ 273 "setenv devtype mmc; " \ 274 "if mmc rescan; then " \ 275 "echo SD/MMC found on device ${devnum};" \ 276 "if run loadimage; then " \ 277 "run loadfdt; " \ 278 "echo Booting from mmc${mmcdev} ...; " \ 279 "run args_mmc; " \ 280 "bootz ${loadaddr} - ${fdtaddr}; " \ 281 "fi;" \ 282 "fi;\0" \ 283 "usbboot=" \ 284 "setenv devnum ${usbdev}; " \ 285 "setenv devtype usb; " \ 286 "usb start ${usbdev}; " \ 287 "if usb dev ${usbdev}; then " \ 288 "if run loadbootenv; then " \ 289 "echo Loaded environment from ${bootenv};" \ 290 "run importbootenv;" \ 291 "fi;" \ 292 "if test -n $uenvcmd; then " \ 293 "echo Running uenvcmd ...;" \ 294 "run uenvcmd;" \ 295 "fi;" \ 296 "if run loadimage; then " \ 297 "run loadfdt; " \ 298 "echo Booting from usb ${usbdev}...; " \ 299 "run usbargs;" \ 300 "bootz ${loadaddr} - ${fdtaddr}; " \ 301 "fi;" \ 302 "fi\0" \ 303 "fi;" \ 304 "usb stop ${usbdev};\0" \ 305 "findfdt="\ 306 "if test $board_name = AM43EPOS; then " \ 307 "setenv fdtfile am43x-epos-evm.dtb; fi; " \ 308 "if test $board_name = AM43__GP; then " \ 309 "setenv fdtfile am437x-gp-evm.dtb; fi; " \ 310 "if test $board_name = AM43__SK; then " \ 311 "setenv fdtfile am437x-sk-evm.dtb; fi; " \ 312 "if test $board_name = AM43_IDK; then " \ 313 "setenv fdtfile am437x-idk-evm.dtb; fi; " \ 314 "if test $fdtfile = undefined; then " \ 315 "echo WARNING: Could not determine device tree; fi; \0" \ 316 NANDARGS \ 317 NETARGS \ 318 DFUARGS \ 319 320 #define CONFIG_BOOTCOMMAND \ 321 "run findfdt; " \ 322 "run envboot;" \ 323 "run mmcboot;" \ 324 "run usbboot;" \ 325 NANDBOOT \ 326 327 #endif 328 329 #ifndef CONFIG_SPL_BUILD 330 /* CPSW Ethernet */ 331 #define CONFIG_CMD_DHCP 332 #define CONFIG_CMD_PING 333 #define CONFIG_CMD_MII 334 #define CONFIG_MII 335 #define CONFIG_BOOTP_DEFAULT 336 #define CONFIG_BOOTP_DNS 337 #define CONFIG_BOOTP_DNS2 338 #define CONFIG_BOOTP_SEND_HOSTNAME 339 #define CONFIG_BOOTP_GATEWAY 340 #define CONFIG_BOOTP_SUBNETMASK 341 #define CONFIG_NET_RETRY_COUNT 10 342 #define CONFIG_PHY_GIGE 343 #endif 344 345 #define CONFIG_DRIVER_TI_CPSW 346 #define CONFIG_PHYLIB 347 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs longer aneg time at 1G */ 348 349 #define CONFIG_SPL_ENV_SUPPORT 350 #define CONFIG_SPL_NET_VCI_STRING "AM43xx U-Boot SPL" 351 352 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_ETH_SUPPORT) 353 #undef CONFIG_ENV_IS_IN_FAT 354 #define CONFIG_ENV_IS_NOWHERE 355 #define CONFIG_SPL_NET_SUPPORT 356 #endif 357 358 #define CONFIG_SYS_RX_ETH_BUFFER 64 359 360 /* NAND support */ 361 #ifdef CONFIG_NAND 362 /* NAND: device related configs */ 363 #define CONFIG_SYS_NAND_PAGE_SIZE 4096 364 #define CONFIG_SYS_NAND_OOBSIZE 224 365 #define CONFIG_SYS_NAND_BLOCK_SIZE (256*1024) 366 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \ 367 CONFIG_SYS_NAND_PAGE_SIZE) 368 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 369 /* NAND: driver related configs */ 370 #define CONFIG_NAND_OMAP_GPMC 371 #define CONFIG_NAND_OMAP_ELM 372 #define CONFIG_SYS_NAND_ONFI_DETECTION 373 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH16_CODE_HW 374 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS 375 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \ 376 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, \ 377 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, \ 378 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, \ 379 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, \ 380 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, \ 381 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, \ 382 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, \ 383 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, \ 384 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, \ 385 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, \ 386 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, \ 387 120, 121, 122, 123, 124, 125, 126, 127, 128, 129, \ 388 130, 131, 132, 133, 134, 135, 136, 137, 138, 139, \ 389 140, 141, 142, 143, 144, 145, 146, 147, 148, 149, \ 390 150, 151, 152, 153, 154, 155, 156, 157, 158, 159, \ 391 160, 161, 162, 163, 164, 165, 166, 167, 168, 169, \ 392 170, 171, 172, 173, 174, 175, 176, 177, 178, 179, \ 393 180, 181, 182, 183, 184, 185, 186, 187, 188, 189, \ 394 190, 191, 192, 193, 194, 195, 196, 197, 198, 199, \ 395 200, 201, 202, 203, 204, 205, 206, 207, 208, 209, \ 396 } 397 #define CONFIG_SYS_NAND_ECCSIZE 512 398 #define CONFIG_SYS_NAND_ECCBYTES 26 399 #define MTDIDS_DEFAULT "nand0=nand.0" 400 #define MTDPARTS_DEFAULT "mtdparts=nand.0:" \ 401 "256k(NAND.SPL)," \ 402 "256k(NAND.SPL.backup1)," \ 403 "256k(NAND.SPL.backup2)," \ 404 "256k(NAND.SPL.backup3)," \ 405 "512k(NAND.u-boot-spl-os)," \ 406 "1m(NAND.u-boot)," \ 407 "256k(NAND.u-boot-env)," \ 408 "256k(NAND.u-boot-env.backup1)," \ 409 "7m(NAND.kernel)," \ 410 "-(NAND.file-system)" 411 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00180000 412 /* NAND: SPL related configs */ 413 #ifdef CONFIG_SPL_NAND_SUPPORT 414 #define CONFIG_SPL_NAND_AM33XX_BCH 415 #endif 416 /* NAND: SPL falcon mode configs */ 417 #ifdef CONFIG_SPL_OS_BOOT 418 #define CONFIG_CMD_SPL_NAND_OFS 0x00100000 /* os parameters */ 419 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x00300000 /* kernel offset */ 420 #define CONFIG_CMD_SPL_WRITE_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 421 #endif 422 #define NANDARGS \ 423 "mtdids=" MTDIDS_DEFAULT "\0" \ 424 "mtdparts=" MTDPARTS_DEFAULT "\0" \ 425 "nandargs=setenv bootargs console=${console} " \ 426 "${optargs} " \ 427 "root=${nandroot} " \ 428 "rootfstype=${nandrootfstype}\0" \ 429 "nandroot=ubi0:rootfs rw ubi.mtd=NAND.file-system,4096\0" \ 430 "nandrootfstype=ubifs rootwait=1\0" \ 431 "nandboot=echo Booting from nand ...; " \ 432 "run nandargs; " \ 433 "nand read ${fdtaddr} NAND.u-boot-spl-os; " \ 434 "nand read ${loadaddr} NAND.kernel; " \ 435 "bootz ${loadaddr} - ${fdtaddr}\0" 436 #define NANDBOOT "run nandboot; " 437 #else /* !CONFIG_NAND */ 438 #define NANDARGS 439 #define NANDBOOT 440 #endif /* CONFIG_NAND */ 441 442 #endif /* __CONFIG_AM43XX_EVM_H */ 443