1 /* 2 * Copyright (C) 2011 Andes Technology Corporation 3 * Shawn Lin, Andes Technology Corporation <nobuhiro@andestech.com> 4 * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com> 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License as published by 11 * the Free Software Foundation; either version 2 of the License, or 12 * (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 22 */ 23 24 #ifndef __CONFIG_H 25 #define __CONFIG_H 26 27 #include <asm/arch/ag101.h> 28 29 /* 30 * CPU and Board Configuration Options 31 */ 32 #define CONFIG_ADP_AG101P 33 34 #define CONFIG_USE_INTERRUPT 35 36 #define CONFIG_SKIP_LOWLEVEL_INIT 37 38 #ifndef CONFIG_SKIP_LOWLEVEL_INIT 39 #define CONFIG_MEM_REMAP 40 #endif 41 42 #ifdef CONFIG_SKIP_LOWLEVEL_INIT 43 #define CONFIG_SYS_TEXT_BASE 0x03200000 44 #else 45 #define CONFIG_SYS_TEXT_BASE 0x00000000 46 #endif 47 48 /* 49 * Timer 50 */ 51 52 /* 53 * According to the discussion in u-boot mailing list before, 54 * CONFIG_SYS_HZ at 1000 is mandatory. 55 */ 56 #define CONFIG_SYS_HZ 1000 57 #define CONFIG_SYS_CLK_FREQ 39062500 58 #define VERSION_CLOCK CONFIG_SYS_CLK_FREQ 59 60 /* 61 * Use Externel CLOCK or PCLK 62 */ 63 #undef CONFIG_FTRTC010_EXTCLK 64 65 #ifndef CONFIG_FTRTC010_EXTCLK 66 #define CONFIG_FTRTC010_PCLK 67 #endif 68 69 #ifdef CONFIG_FTRTC010_EXTCLK 70 #define TIMER_CLOCK 32768 /* CONFIG_FTRTC010_EXTCLK */ 71 #else 72 #define TIMER_CLOCK CONFIG_SYS_HZ /* CONFIG_FTRTC010_PCLK */ 73 #endif 74 75 #define TIMER_LOAD_VAL 0xffffffff 76 77 /* 78 * Real Time Clock 79 */ 80 #define CONFIG_RTC_FTRTC010 81 82 /* 83 * Real Time Clock Divider 84 * RTC_DIV_COUNT (OSC_CLK/OSC_5MHZ) 85 */ 86 #define OSC_5MHZ (5*1000000) 87 #define OSC_CLK (4*OSC_5MHZ) 88 #define RTC_DIV_COUNT (0.5) /* Why?? */ 89 90 /* 91 * Serial console configuration 92 */ 93 94 /* FTUART is a high speed NS 16C550A compatible UART, addr: 0x99600000 */ 95 #define CONFIG_BAUDRATE 38400 96 #define CONFIG_CONS_INDEX 1 97 #define CONFIG_SYS_NS16550 98 #define CONFIG_SYS_NS16550_SERIAL 99 #define CONFIG_SYS_NS16550_COM1 CONFIG_FTUART010_02_BASE 100 #define CONFIG_SYS_NS16550_REG_SIZE -4 101 #define CONFIG_SYS_NS16550_CLK ((18432000 * 20) / 25) /* AG101P */ 102 103 /* 104 * Ethernet 105 */ 106 #define CONFIG_FTMAC100 107 108 #define CONFIG_BOOTDELAY 3 109 110 /* 111 * SD (MMC) controller 112 */ 113 #define CONFIG_MMC 114 #define CONFIG_CMD_MMC 115 #define CONFIG_GENERIC_MMC 116 #define CONFIG_DOS_PARTITION 117 #define CONFIG_FTSDC010 118 #define CONFIG_FTSDC010_NUMBER 1 119 #define CONFIG_FTSDC010_SDIO 120 #define CONFIG_CMD_FAT 121 #define CONFIG_CMD_EXT2 122 123 /* 124 * Command line configuration. 125 */ 126 #include <config_cmd_default.h> 127 128 #define CONFIG_CMD_CACHE 129 #define CONFIG_CMD_DATE 130 #define CONFIG_CMD_PING 131 132 /* 133 * Miscellaneous configurable options 134 */ 135 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 136 #define CONFIG_SYS_PROMPT "NDS32 # " /* Monitor Command Prompt */ 137 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 138 139 /* Print Buffer Size */ 140 #define CONFIG_SYS_PBSIZE \ 141 (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 142 143 /* max number of command args */ 144 #define CONFIG_SYS_MAXARGS 16 145 146 /* Boot Argument Buffer Size */ 147 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 148 149 /* 150 * Size of malloc() pool 151 */ 152 /* 512kB is suggested, (CONFIG_ENV_SIZE + 128 * 1024) was not enough */ 153 #define CONFIG_SYS_MALLOC_LEN (512 << 10) 154 155 /* 156 * size in bytes reserved for initial data 157 */ 158 #define CONFIG_SYS_GBL_DATA_SIZE 128 159 160 /* 161 * AHB Controller configuration 162 */ 163 #define CONFIG_FTAHBC020S 164 165 #ifdef CONFIG_FTAHBC020S 166 #include <faraday/ftahbc020s.h> 167 168 /* Address of PHYS_SDRAM_0 before memory remap is at 0x(100)00000 */ 169 #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 0x100 170 171 /* 172 * CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6: this define is used in lowlevel_init.S, 173 * hence we cannot use FTAHBC020S_BSR_SIZE(2048) since it will use ffs() wrote 174 * in C language. 175 */ 176 #define CONFIG_SYS_FTAHBC020S_SLAVE_BSR_6 \ 177 (FTAHBC020S_SLAVE_BSR_BASE(CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE) | \ 178 FTAHBC020S_SLAVE_BSR_SIZE(0xb)) 179 #endif 180 181 /* 182 * Watchdog 183 */ 184 #define CONFIG_FTWDT010_WATCHDOG 185 186 /* 187 * PMU Power controller configuration 188 */ 189 #define CONFIG_PMU 190 #define CONFIG_FTPMU010_POWER 191 192 #ifdef CONFIG_FTPMU010_POWER 193 #include <faraday/ftpmu010.h> 194 #define CONFIG_SYS_FTPMU010_PDLLCR0_HCLKOUTDIS 0x0E 195 #define CONFIG_SYS_FTPMU010_SDRAMHTC (FTPMU010_SDRAMHTC_EBICTRL_DCSR | \ 196 FTPMU010_SDRAMHTC_EBIDATA_DCSR | \ 197 FTPMU010_SDRAMHTC_SDRAMCS_DCSR | \ 198 FTPMU010_SDRAMHTC_SDRAMCTL_DCSR | \ 199 FTPMU010_SDRAMHTC_CKE_DCSR | \ 200 FTPMU010_SDRAMHTC_DQM_DCSR | \ 201 FTPMU010_SDRAMHTC_SDCLK_DCSR) 202 #endif 203 204 /* 205 * SDRAM controller configuration 206 */ 207 #define CONFIG_FTSDMC021 208 209 #ifdef CONFIG_FTSDMC021 210 #include <faraday/ftsdmc021.h> 211 212 #define CONFIG_SYS_FTSDMC021_TP1 (FTSDMC021_TP1_TRAS(2) | \ 213 FTSDMC021_TP1_TRP(1) | \ 214 FTSDMC021_TP1_TRCD(1) | \ 215 FTSDMC021_TP1_TRF(3) | \ 216 FTSDMC021_TP1_TWR(1) | \ 217 FTSDMC021_TP1_TCL(2)) 218 219 #define CONFIG_SYS_FTSDMC021_TP2 (FTSDMC021_TP2_INI_PREC(4) | \ 220 FTSDMC021_TP2_INI_REFT(8) | \ 221 FTSDMC021_TP2_REF_INTV(0x180)) 222 223 /* 224 * CONFIG_SYS_FTSDMC021_CR1: this define is used in lowlevel_init.S, 225 * hence we cannot use FTSDMC021_BANK_SIZE(64) since it will use ffs() wrote in 226 * C language. 227 */ 228 #define CONFIG_SYS_FTSDMC021_CR1 (FTSDMC021_CR1_DDW(2) | \ 229 FTSDMC021_CR1_DSZ(3) | \ 230 FTSDMC021_CR1_MBW(2) | \ 231 FTSDMC021_CR1_BNKSIZE(6)) 232 233 #define CONFIG_SYS_FTSDMC021_CR2 (FTSDMC021_CR2_IPREC | \ 234 FTSDMC021_CR2_IREF | \ 235 FTSDMC021_CR2_ISMR) 236 237 #define CONFIG_SYS_FTSDMC021_BANK0_BASE CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE 238 #define CONFIG_SYS_FTSDMC021_BANK0_BSR (FTSDMC021_BANK_ENABLE | \ 239 CONFIG_SYS_FTSDMC021_BANK0_BASE) 240 241 #define CONFIG_SYS_FTSDMC021_BANK1_BASE \ 242 (CONFIG_SYS_FTAHBC020S_SLAVE_BSR_BASE + (PHYS_SDRAM_0_SIZE >> 20)) 243 #define CONFIG_SYS_FTSDMC021_BANK1_BSR (FTSDMC021_BANK_ENABLE | \ 244 CONFIG_SYS_FTSDMC021_BANK1_BASE) 245 #endif 246 247 /* 248 * Physical Memory Map 249 */ 250 #if defined(CONFIG_MEM_REMAP) || defined(CONFIG_SKIP_LOWLEVEL_INIT) 251 #define PHYS_SDRAM_0 0x00000000 /* SDRAM Bank #1 */ 252 #if defined(CONFIG_MEM_REMAP) 253 #define PHYS_SDRAM_0_AT_INIT 0x10000000 /* SDRAM Bank #1 before remap*/ 254 #endif 255 #else /* !CONFIG_SKIP_LOWLEVEL_INIT && !CONFIG_MEM_REMAP */ 256 #define PHYS_SDRAM_0 0x10000000 /* SDRAM Bank #1 */ 257 #endif 258 #define PHYS_SDRAM_1 \ 259 (PHYS_SDRAM_0 + PHYS_SDRAM_0_SIZE) /* SDRAM Bank #2 */ 260 261 #define CONFIG_NR_DRAM_BANKS 2 /* we have 2 bank of DRAM */ 262 #define PHYS_SDRAM_0_SIZE 0x04000000 /* 64 MB */ 263 #define PHYS_SDRAM_1_SIZE 0x04000000 /* 64 MB */ 264 265 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_0 266 267 #ifdef CONFIG_MEM_REMAP 268 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0xA0000 - \ 269 GENERATED_GBL_DATA_SIZE) 270 #else 271 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - \ 272 GENERATED_GBL_DATA_SIZE) 273 #endif /* CONFIG_MEM_REMAP */ 274 275 /* 276 * Load address and memory test area should agree with 277 * arch/nds32/config.mk. Be careful not to overwrite U-boot itself. 278 */ 279 #define CONFIG_SYS_LOAD_ADDR 0x300000 280 281 /* memtest works on 63 MB in DRAM */ 282 #define CONFIG_SYS_MEMTEST_START PHYS_SDRAM_0 283 #define CONFIG_SYS_MEMTEST_END (PHYS_SDRAM_0 + 0x03F00000) 284 285 /* 286 * Static memory controller configuration 287 */ 288 #define CONFIG_FTSMC020 289 290 #ifdef CONFIG_FTSMC020 291 #include <faraday/ftsmc020.h> 292 293 #define CONFIG_SYS_FTSMC020_CONFIGS { \ 294 { FTSMC020_BANK0_CONFIG, FTSMC020_BANK0_TIMING, }, \ 295 { FTSMC020_BANK1_CONFIG, FTSMC020_BANK1_TIMING, }, \ 296 } 297 298 #ifndef CONFIG_SKIP_LOWLEVEL_INIT /* FLASH is on BANK 0 */ 299 #define FTSMC020_BANK0_LOWLV_CONFIG (FTSMC020_BANK_ENABLE | \ 300 FTSMC020_BANK_SIZE_32M | \ 301 FTSMC020_BANK_MBW_32) 302 303 #define FTSMC020_BANK0_LOWLV_TIMING (FTSMC020_TPR_RBE | \ 304 FTSMC020_TPR_AST(1) | \ 305 FTSMC020_TPR_CTW(1) | \ 306 FTSMC020_TPR_ATI(1) | \ 307 FTSMC020_TPR_AT2(1) | \ 308 FTSMC020_TPR_WTC(1) | \ 309 FTSMC020_TPR_AHT(1) | \ 310 FTSMC020_TPR_TRNA(1)) 311 #endif 312 313 /* 314 * FLASH on ADP_AG101P is connected to BANK0 315 * Just disalbe the other BANK to avoid detection error. 316 */ 317 #define FTSMC020_BANK0_CONFIG (FTSMC020_BANK_ENABLE | \ 318 FTSMC020_BANK_BASE(PHYS_FLASH_1) | \ 319 FTSMC020_BANK_SIZE_32M | \ 320 FTSMC020_BANK_MBW_32) 321 322 #define FTSMC020_BANK0_TIMING (FTSMC020_TPR_AST(3) | \ 323 FTSMC020_TPR_CTW(3) | \ 324 FTSMC020_TPR_ATI(0xf) | \ 325 FTSMC020_TPR_AT2(3) | \ 326 FTSMC020_TPR_WTC(3) | \ 327 FTSMC020_TPR_AHT(3) | \ 328 FTSMC020_TPR_TRNA(0xf)) 329 330 #define FTSMC020_BANK1_CONFIG (0x00) 331 #define FTSMC020_BANK1_TIMING (0x00) 332 #endif /* CONFIG_FTSMC020 */ 333 334 /* 335 * FLASH and environment organization 336 */ 337 /* use CFI framework */ 338 #define CONFIG_SYS_FLASH_CFI 339 #define CONFIG_FLASH_CFI_DRIVER 340 341 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 342 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 343 344 /* support JEDEC */ 345 346 /* Do not use CONFIG_FLASH_CFI_LEGACY to detect on board flash */ 347 #ifdef CONFIG_SKIP_LOWLEVEL_INIT 348 #define PHYS_FLASH_1 0x80400000 /* BANK 1 */ 349 #else /* !CONFIG_SKIP_LOWLEVEL_INIT */ 350 #ifdef CONFIG_MEM_REMAP 351 #define PHYS_FLASH_1 0x80000000 /* BANK 0 */ 352 #else 353 #define PHYS_FLASH_1 0x00000000 /* BANK 0 */ 354 #endif /* CONFIG_MEM_REMAP */ 355 #endif /* CONFIG_SKIP_LOWLEVEL_INIT */ 356 357 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 358 #define CONFIG_SYS_FLASH_BANKS_LIST { PHYS_FLASH_1, } 359 #define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 360 361 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* TO for Flash Erase (ms) */ 362 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* TO for Flash Write (ms) */ 363 364 /* max number of memory banks */ 365 /* 366 * There are 4 banks supported for this Controller, 367 * but we have only 1 bank connected to flash on board 368 */ 369 #define CONFIG_SYS_MAX_FLASH_BANKS 1 370 371 /* max number of sectors on one chip */ 372 #define CONFIG_FLASH_SECTOR_SIZE (0x10000*2*2) 373 #define CONFIG_ENV_SECT_SIZE CONFIG_FLASH_SECTOR_SIZE 374 #define CONFIG_SYS_MAX_FLASH_SECT 128 375 376 /* environments */ 377 #define CONFIG_ENV_IS_IN_FLASH 378 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x140000) 379 #define CONFIG_ENV_SIZE 8192 380 #define CONFIG_ENV_OVERWRITE 381 382 #endif /* __CONFIG_H */ 383