1 /* 2 * (C) Copyright 2005 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 */ 23 24 /* 25 * TQM8349 board configuration file 26 */ 27 28 #ifndef __CONFIG_H 29 #define __CONFIG_H 30 31 #define DEBUG 32 #undef DEBUG 33 34 /* 35 * High Level Configuration Options 36 */ 37 #define CONFIG_E300 1 /* E300 Family */ 38 #define CONFIG_MPC83XX 1 /* MPC83XX family */ 39 #define CONFIG_MPC834X 1 /* MPC834X specific */ 40 #define CONFIG_TQM834X 1 /* TQM834X board specific */ 41 42 /* IMMR Base Addres Register, use Freescale default: 0xff400000 */ 43 #define CFG_IMMRBAR IMMRBAR_BASE_ADDR 44 45 /* System clock. Primary input clock when in PCI host mode */ 46 #define CONFIG_83XX_CLKIN 66666000 /* 66,666 MHz */ 47 48 /* 49 * Local Bus LCRR 50 * LCRR: DLL bypass, Clock divider is 8 51 * 52 * for CSB = 266 MHz it gives LCB clock frequency = 33 MHz 53 * 54 * External Local Bus rate is 55 * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV 56 */ 57 #define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_8) 58 59 /* board pre init: do not call, nothing to do */ 60 #undef CONFIG_BOARD_EARLY_INIT_F 61 62 /* detect the number of flash banks */ 63 #define CONFIG_BOARD_EARLY_INIT_R 64 65 /* 66 * DDR Setup 67 */ 68 #define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ 69 #define CFG_SDRAM_BASE CFG_DDR_BASE 70 #define CFG_DDR_SDRAM_BASE CFG_DDR_BASE 71 #define DDR_CASLAT_25 /* CASLAT set to 2.5 */ 72 #undef CONFIG_DDR_ECC /* only for ECC DDR module */ 73 #undef CONFIG_SPD_EEPROM /* do not use SPD EEPROM for DDR setup */ 74 75 #undef CFG_DRAM_TEST /* memory test, takes time */ 76 #define CFG_MEMTEST_START 0x00000000 /* memtest region */ 77 #define CFG_MEMTEST_END 0x00100000 78 79 /* 80 * FLASH on the Local Bus 81 */ 82 #define CFG_FLASH_CFI /* use the Common Flash Interface */ 83 #define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ 84 #undef CFG_FLASH_CHECKSUM 85 #define CFG_FLASH_BASE 0x80000000 /* start of FLASH */ 86 87 /* buffered writes in the AMD chip set is not supported yet */ 88 #undef CFG_FLASH_USE_BUFFER_WRITE 89 90 /* 91 * FLASH bank number detection 92 */ 93 94 /* 95 * When CFG_MAX_FLASH_BANKS_DETECT is defined, the actual number of Flash 96 * banks has to be determined at runtime and stored in a gloabl variable 97 * tqm834x_num_flash_banks. The value of CFG_MAX_FLASH_BANKS_DETECT is only 98 * used insted of CFG_MAX_FLASH_BANKS to allocate the array flash_info, and 99 * should be made sufficiently large to accomodate the number of banks that 100 * might acutally be detected. Since most (all?) Flash related functions use 101 * CFG_MAX_FLASH_BANKS as the number of actual banks on the board, it is 102 * defined as tqm834x_num_flash_banks. 103 */ 104 #define CFG_MAX_FLASH_BANKS_DETECT 2 105 #ifndef __ASSEMBLY__ 106 extern int tqm834x_num_flash_banks; 107 #endif 108 #define CFG_MAX_FLASH_BANKS (tqm834x_num_flash_banks) 109 110 #define CFG_MAX_FLASH_SECT 512 /* max sectors per device */ 111 112 /* 32 bit device at 0x80000000 via GPCM (0x8000_1801) */ 113 #define CFG_BR0_PRELIM ((CFG_FLASH_BASE & BR_BA) | \ 114 BR_MS_GPCM | BR_PS_32 | BR_V) 115 116 /* FLASH timing (0x0000_0c54) */ 117 #define CFG_OR_TIMING_FLASH (OR_GPCM_CSNT | OR_GPCM_ACS_0b10 | \ 118 OR_GPCM_SCY_5 | OR_GPCM_TRLX) 119 120 #define CFG_PRELIM_OR_AM 0xc0000000 /* OR addr mask: 1 GiB */ 121 122 #define CFG_OR0_PRELIM (CFG_PRELIM_OR_AM | CFG_OR_TIMING_FLASH) 123 124 #define CFG_LBLAWAR0_PRELIM 0x8000001D /* 1 GiB window size (2^(size + 1)) */ 125 #define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE /* Window base at flash base */ 126 127 /* disable remaining mappings */ 128 #define CFG_BR1_PRELIM 0x00000000 129 #define CFG_OR1_PRELIM 0x00000000 130 #define CFG_LBLAWBAR1_PRELIM 0x00000000 131 #define CFG_LBLAWAR1_PRELIM 0x00000000 132 133 #define CFG_BR2_PRELIM 0x00000000 134 #define CFG_OR2_PRELIM 0x00000000 135 #define CFG_LBLAWBAR2_PRELIM 0x00000000 136 #define CFG_LBLAWAR2_PRELIM 0x00000000 137 138 #define CFG_BR3_PRELIM 0x00000000 139 #define CFG_OR3_PRELIM 0x00000000 140 #define CFG_LBLAWBAR3_PRELIM 0x00000000 141 #define CFG_LBLAWAR3_PRELIM 0x00000000 142 143 #define CFG_BR4_PRELIM 0x00000000 144 #define CFG_OR4_PRELIM 0x00000000 145 #define CFG_LBLAWBAR4_PRELIM 0x00000000 146 #define CFG_LBLAWAR4_PRELIM 0x00000000 147 148 #define CFG_BR5_PRELIM 0x00000000 149 #define CFG_OR5_PRELIM 0x00000000 150 #define CFG_LBLAWBAR5_PRELIM 0x00000000 151 #define CFG_LBLAWAR5_PRELIM 0x00000000 152 153 #define CFG_BR6_PRELIM 0x00000000 154 #define CFG_OR6_PRELIM 0x00000000 155 #define CFG_LBLAWBAR6_PRELIM 0x00000000 156 #define CFG_LBLAWAR6_PRELIM 0x00000000 157 158 #define CFG_BR7_PRELIM 0x00000000 159 #define CFG_OR7_PRELIM 0x00000000 160 #define CFG_LBLAWBAR7_PRELIM 0x00000000 161 #define CFG_LBLAWAR7_PRELIM 0x00000000 162 163 /* 164 * Monitor config 165 */ 166 #define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ 167 168 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) 169 #define CFG_RAMBOOT 170 #else 171 #undef CFG_RAMBOOT 172 #endif 173 174 #define CONFIG_L1_INIT_RAM 175 #define CFG_INIT_RAM_LOCK 1 176 #define CFG_INIT_RAM_ADDR 0x20000000 /* Initial RAM address */ 177 #define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ 178 179 #define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ 180 #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) 181 #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET 182 183 #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 184 #define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ 185 186 /* 187 * Serial Port 188 */ 189 #define CONFIG_CONS_INDEX 1 190 #undef CONFIG_SERIAL_SOFTWARE_FIFO 191 #define CFG_NS16550 192 #define CFG_NS16550_SERIAL 193 #define CFG_NS16550_REG_SIZE 1 194 #define CFG_NS16550_CLK get_bus_freq(0) 195 196 #define CFG_BAUDRATE_TABLE \ 197 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 198 199 #define CFG_NS16550_COM1 (CFG_IMMRBAR + 0x4500) 200 #define CFG_NS16550_COM2 (CFG_IMMRBAR + 0x4600) 201 202 /* 203 * I2C 204 */ 205 #define CONFIG_HARD_I2C /* I2C with hardware support */ 206 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 207 #define CFG_I2C_SPEED 400000 /* I2C speed: 400KHz */ 208 #define CFG_I2C_SLAVE 0x7F /* slave address */ 209 #define CFG_I2C_OFFSET 0x3000 210 211 /* I2C EEPROM, configuration for onboard EEPROMs 24C256 and 24C32 */ 212 #define CFG_I2C_EEPROM_ADDR 0x50 /* 1010000x */ 213 #define CFG_I2C_EEPROM_ADDR_LEN 2 /* 16 bit */ 214 #define CFG_EEPROM_PAGE_WRITE_BITS 5 /* 32 bytes per write */ 215 #define CFG_EEPROM_PAGE_WRITE_ENABLE 216 #define CFG_EEPROM_PAGE_WRITE_DELAY_MS 12 /* 10ms +/- 20% */ 217 #define CFG_I2C_MULTI_EEPROMS 1 /* more than one eeprom */ 218 219 /* I2C RTC */ 220 #define CONFIG_RTC_DS1337 /* use ds1337 rtc via i2c */ 221 #define CFG_I2C_RTC_ADDR 0x68 /* at address 0x68 */ 222 223 /* I2C SYSMON (LM75) */ 224 #define CONFIG_DTT_LM75 1 /* ON Semi's LM75 */ 225 #define CONFIG_DTT_SENSORS {0} /* Sensor addresses */ 226 #define CFG_DTT_MAX_TEMP 70 227 #define CFG_DTT_LOW_TEMP -30 228 #define CFG_DTT_HYSTERESIS 3 229 230 /* 231 * TSEC 232 */ 233 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 234 #define CONFIG_MII 235 236 #define CFG_TSEC1_OFFSET 0x24000 237 #define CFG_TSEC1 (CFG_IMMRBAR + CFG_TSEC1_OFFSET) 238 #define CFG_TSEC2_OFFSET 0x25000 239 #define CFG_TSEC2 (CFG_IMMRBAR + CFG_TSEC2_OFFSET) 240 241 #if defined(CONFIG_TSEC_ENET) 242 243 #ifndef CONFIG_NET_MULTI 244 #define CONFIG_NET_MULTI 1 245 #endif 246 247 #define CONFIG_MPC83XX_TSEC1 1 248 #define CONFIG_MPC83XX_TSEC1_NAME "TSEC0" 249 #define CONFIG_MPC83XX_TSEC2 1 250 #define CONFIG_MPC83XX_TSEC2_NAME "TSEC1" 251 #define TSEC1_PHY_ADDR 0 252 #define TSEC2_PHY_ADDR 1 253 #define TSEC1_PHYIDX 0 254 #define TSEC2_PHYIDX 0 255 256 /* Options are: TSEC[0-1] */ 257 #define CONFIG_ETHPRIME "TSEC0" 258 259 #endif /* CONFIG_TSEC_ENET */ 260 261 /* 262 * General PCI 263 * Addresses are mapped 1-1. 264 */ 265 /* FIXME: Real PCI support will come in a follow-up update. */ 266 #undef CONFIG_PCI 267 268 #define CFG_PCI1_MEM_BASE 0x80000000 269 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE 270 #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ 271 #define CFG_PCI1_IO_BASE 0x00000000 272 #define CFG_PCI1_IO_PHYS 0xe2000000 273 #define CFG_PCI1_IO_SIZE 0x1000000 /* 16M */ 274 275 #define CFG_PCI2_MEM_BASE 0xA0000000 276 #define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE 277 #define CFG_PCI2_MEM_SIZE 0x20000000 /* 512M */ 278 #define CFG_PCI2_IO_BASE 0x00000000 279 #define CFG_PCI2_IO_PHYS 0xe3000000 280 #define CFG_PCI2_IO_SIZE 0x1000000 /* 16M */ 281 #if defined(CONFIG_PCI) 282 283 #define PCI_ALL_PCI1 284 #if defined(PCI_64BIT) 285 #undef PCI_ALL_PCI1 286 #undef PCI_TWO_PCI1 287 #undef PCI_ONE_PCI1 288 #endif 289 290 #define CONFIG_NET_MULTI 291 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 292 293 #undef CONFIG_EEPRO100 294 #undef CONFIG_TULIP 295 296 #if !defined(CONFIG_PCI_PNP) 297 #define PCI_ENET0_IOADDR 0xFIXME 298 #define PCI_ENET0_MEMADDR 0xFIXME 299 #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ 300 #endif 301 302 #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 303 #define CFG_PCI_SUBSYS_VENDORID 0x1057 /* Motorola */ 304 305 #endif /* CONFIG_PCI */ 306 307 /* 308 * Environment 309 */ 310 #define CONFIG_ENV_OVERWRITE 311 312 #ifndef CFG_RAMBOOT 313 #define CFG_ENV_IS_IN_FLASH 1 314 #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) 315 #define CFG_ENV_SECT_SIZE 0x20000 /* 256K(one sector) for env */ 316 #define CFG_ENV_SIZE 0x2000 317 #else 318 #define CFG_NO_FLASH 1 /* Flash is not usable now */ 319 #define CFG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ 320 #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) 321 #define CFG_ENV_SIZE 0x2000 322 #endif 323 324 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 325 #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 326 327 /* Common commands */ 328 #define CFG_CMD_TQM8349_COMMON CFG_CMD_DATE | CFG_CMD_I2C | CFG_CMD_DTT\ 329 | CFG_CMD_PING | CFG_CMD_EEPROM \ 330 | CFG_CMD_MII | CFG_CMD_JFFS2 331 332 #if defined(CFG_RAMBOOT) 333 334 #if defined(CONFIG_PCI) 335 #define CONFIG_COMMANDS ((CONFIG_CMD_DFL | CFG_CMD_PCI \ 336 | CFG_CMD_TQM8349_COMMON) \ 337 & \ 338 ~(CFG_CMD_ENV | CFG_CMD_LOADS)) 339 #else 340 #define CONFIG_COMMANDS ((CONFIG_CMD_DFL \ 341 | CFG_CMD_TQM8349_COMMON) \ 342 & \ 343 ~(CFG_CMD_ENV | CFG_CMD_LOADS)) 344 #endif 345 346 #else /* CFG_RAMBOOT */ 347 348 #if defined(CONFIG_PCI) 349 #define CONFIG_COMMANDS (CONFIG_CMD_DFL | CFG_CMD_PCI \ 350 | CFG_CMD_TQM8349_COMMON) 351 #else 352 #define CONFIG_COMMANDS (CONFIG_CMD_DFL \ 353 | CFG_CMD_TQM8349_COMMON) 354 #endif 355 356 #endif /* CFG_RAMBOOT */ 357 358 #include <cmd_confdefs.h> 359 360 /* 361 * Miscellaneous configurable options 362 */ 363 #define CFG_LONGHELP /* undef to save memory */ 364 #define CFG_LOAD_ADDR 0x2000000 /* default load address */ 365 #define CFG_PROMPT "=> " /* Monitor Command Prompt */ 366 367 #if (CONFIG_COMMANDS & CFG_CMD_KGDB) 368 #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ 369 #else 370 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ 371 #endif 372 373 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ 374 #define CFG_MAXARGS 16 /* max number of command args */ 375 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ 376 #define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ 377 378 #undef CONFIG_WATCHDOG /* watchdog disabled */ 379 380 /* 381 * For booting Linux, the board info and command line data 382 * have to be in the first 8 MB of memory, since this is 383 * the maximum mapped by the Linux kernel during initialization. 384 */ 385 #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ 386 387 /* 388 * Cache Configuration 389 */ 390 #define CFG_DCACHE_SIZE 32768 391 #define CFG_CACHELINE_SIZE 32 392 #if (CONFIG_COMMANDS & CFG_CMD_KGDB) 393 #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ 394 #endif 395 396 #define CFG_HRCW_LOW (\ 397 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ 398 HRCWL_DDR_TO_SCB_CLK_1X1 |\ 399 HRCWL_CSB_TO_CLKIN_4X1 |\ 400 HRCWL_VCO_1X2 |\ 401 HRCWL_CORE_TO_CSB_2X1) 402 403 #if defined(PCI_64BIT) 404 #define CFG_HRCW_HIGH (\ 405 HRCWH_PCI_HOST |\ 406 HRCWH_64_BIT_PCI |\ 407 HRCWH_PCI1_ARBITER_ENABLE |\ 408 HRCWH_PCI2_ARBITER_DISABLE |\ 409 HRCWH_CORE_ENABLE |\ 410 HRCWH_FROM_0X00000100 |\ 411 HRCWH_BOOTSEQ_DISABLE |\ 412 HRCWH_SW_WATCHDOG_DISABLE |\ 413 HRCWH_ROM_LOC_LOCAL_16BIT |\ 414 HRCWH_TSEC1M_IN_GMII |\ 415 HRCWH_TSEC2M_IN_GMII ) 416 #else 417 #define CFG_HRCW_HIGH (\ 418 HRCWH_PCI_HOST |\ 419 HRCWH_32_BIT_PCI |\ 420 HRCWH_PCI1_ARBITER_ENABLE |\ 421 HRCWH_PCI2_ARBITER_ENABLE |\ 422 HRCWH_CORE_ENABLE |\ 423 HRCWH_FROM_0X00000100 |\ 424 HRCWH_BOOTSEQ_DISABLE |\ 425 HRCWH_SW_WATCHDOG_DISABLE |\ 426 HRCWH_ROM_LOC_LOCAL_16BIT |\ 427 HRCWH_TSEC1M_IN_GMII |\ 428 HRCWH_TSEC2M_IN_GMII ) 429 #endif 430 431 /* i-cache and d-cache disabled */ 432 #define CFG_HID0_INIT 0x000000000 433 #define CFG_HID0_FINAL CFG_HID0_INIT 434 #define CFG_HID2 0x000000000 435 436 /* 437 * Internal Definitions 438 * 439 * Boot Flags 440 */ 441 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ 442 #define BOOTFLAG_WARM 0x02 /* Software reboot */ 443 444 #if (CONFIG_COMMANDS & CFG_CMD_KGDB) 445 #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ 446 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 447 #endif 448 449 /* 450 * Environment Configuration 451 */ 452 453 #if defined(CONFIG_TSEC_ENET) 454 #define CONFIG_ETHADDR D2:DA:5E:44:BC:29 455 #define CONFIG_HAS_ETH1 456 #define CONFIG_ETH1ADDR 1E:F3:40:21:92:53 457 #endif 458 459 #define CONFIG_IPADDR 192.168.205.1 460 461 #define CONFIG_HOSTNAME tqm8349 462 #define CONFIG_ROOTPATH /opt/eldk/ppc_6xx 463 #define CONFIG_BOOTFILE /tftpboot/tqm83xx/uImage 464 465 #define CONFIG_SERVERIP 192.168.1.1 466 #define CONFIG_GATEWAYIP 192.168.1.1 467 #define CONFIG_NETMASK 255.255.255.0 468 469 #define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ 470 471 #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ 472 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 473 474 #define CONFIG_BAUDRATE 115200 475 476 #define CONFIG_PREBOOT "echo;" \ 477 "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \ 478 "echo" 479 480 #undef CONFIG_BOOTARGS 481 482 #define CONFIG_EXTRA_ENV_SETTINGS \ 483 "netdev=eth0\0" \ 484 "hostname=tqm83xx\0" \ 485 "nfsargs=setenv bootargs root=/dev/nfs rw " \ 486 "nfsroot=$(serverip):$(rootpath)\0" \ 487 "ramargs=setenv bootargs root=/dev/ram rw\0" \ 488 "addip=setenv bootargs $(bootargs) " \ 489 "ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)" \ 490 ":$(hostname):$(netdev):off panic=1\0" \ 491 "addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\ 492 "flash_nfs=run nfsargs addip addtty;" \ 493 "bootm $(kernel_addr)\0" \ 494 "flash_self=run ramargs addip addtty;" \ 495 "bootm $(kernel_addr) $(ramdisk_addr)\0" \ 496 "net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;" \ 497 "bootm\0" \ 498 "rootpath=/opt/eldk/ppc_6xx\0" \ 499 "bootfile=/tftpboot/tqm83xx/uImage\0" \ 500 "kernel_addr=80060000\0" \ 501 "ramdisk_addr=80160000\0" \ 502 "load=tftp 100000 /tftpboot/tqm83xx/u-boot.bin\0" \ 503 "update=protect off 80000000 8003ffff; " \ 504 "era 80000000 8003ffff; cp.b 100000 80000000 40000\0" \ 505 "upd=run load;run update\0" \ 506 "" 507 508 #define CONFIG_BOOTCOMMAND "run flash_self" 509 510 /* 511 * JFFS2 partitions 512 */ 513 /* mtdparts command line support */ 514 #define CONFIG_JFFS2_CMDLINE 515 #define MTDIDS_DEFAULT "nor0=TQM834x-0" 516 517 /* default mtd partition table */ 518 #define MTDPARTS_DEFAULT "mtdparts=TQM834x-0:256k(u-boot),128k(env),"\ 519 "1m(kernel),2m(initrd),"\ 520 "-(user);"\ 521 522 #endif /* __CONFIG_H */ 523