1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * T4240 RDB board configuration file 9 */ 10 #ifndef __CONFIG_H 11 #define __CONFIG_H 12 13 #define CONFIG_FSL_SATA_V2 14 #define CONFIG_PCIE4 15 16 #define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ 17 18 #ifdef CONFIG_RAMBOOT_PBL 19 #define CONFIG_SYS_FSL_PBL_PBI $(SRCTREE)/board/freescale/t4rdb/t4_pbi.cfg 20 #ifndef CONFIG_SDCARD 21 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 22 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 23 #else 24 #define CONFIG_SPL_FLUSH_IMAGE 25 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 26 #define CONFIG_SYS_TEXT_BASE 0x00201000 27 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 28 #define CONFIG_SPL_PAD_TO 0x40000 29 #define CONFIG_SPL_MAX_SIZE 0x28000 30 #define RESET_VECTOR_OFFSET 0x27FFC 31 #define BOOT_PAGE_OFFSET 0x27000 32 33 #ifdef CONFIG_SDCARD 34 #define CONFIG_RESET_VECTOR_ADDRESS 0x200FFC 35 #define CONFIG_SPL_MMC_MINIMAL 36 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 37 #define CONFIG_SYS_MMC_U_BOOT_DST 0x00200000 38 #define CONFIG_SYS_MMC_U_BOOT_START 0x00200000 39 #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) 40 #ifndef CONFIG_SPL_BUILD 41 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 42 #endif 43 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 44 #define CONFIG_SYS_FSL_PBL_RCW $(SRCTREE)/board/freescale/t4rdb/t4_sd_rcw.cfg 45 #define CONFIG_SPL_MMC_BOOT 46 #endif 47 48 #ifdef CONFIG_SPL_BUILD 49 #define CONFIG_SPL_SKIP_RELOCATE 50 #define CONFIG_SPL_COMMON_INIT_DDR 51 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 52 #endif 53 54 #endif 55 #endif /* CONFIG_RAMBOOT_PBL */ 56 57 #define CONFIG_DDR_ECC 58 59 /* High Level Configuration Options */ 60 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 61 #define CONFIG_MP /* support multiple processors */ 62 63 #ifndef CONFIG_SYS_TEXT_BASE 64 #define CONFIG_SYS_TEXT_BASE 0xeff40000 65 #endif 66 67 #ifndef CONFIG_RESET_VECTOR_ADDRESS 68 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 69 #endif 70 71 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 72 #define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS 73 #define CONFIG_PCIE1 /* PCIE controller 1 */ 74 #define CONFIG_PCIE2 /* PCIE controller 2 */ 75 #define CONFIG_PCIE3 /* PCIE controller 3 */ 76 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 77 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 78 79 #define CONFIG_ENV_OVERWRITE 80 81 /* 82 * These can be toggled for performance analysis, otherwise use default. 83 */ 84 #define CONFIG_SYS_CACHE_STASHING 85 #define CONFIG_BTB /* toggle branch predition */ 86 #ifdef CONFIG_DDR_ECC 87 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 88 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 89 #endif 90 91 #define CONFIG_ENABLE_36BIT_PHYS 92 93 #define CONFIG_ADDR_MAP 94 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 95 96 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 97 #define CONFIG_SYS_MEMTEST_END 0x00400000 98 #define CONFIG_SYS_ALT_MEMTEST 99 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 100 101 /* 102 * Config the L3 Cache as L3 SRAM 103 */ 104 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 105 #define CONFIG_SYS_L3_SIZE (512 << 10) 106 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) 107 #ifdef CONFIG_RAMBOOT_PBL 108 #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) 109 #endif 110 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) 111 #define CONFIG_SPL_RELOC_MALLOC_SIZE (50 << 10) 112 #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) 113 #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) 114 115 #define CONFIG_SYS_DCSRBAR 0xf0000000 116 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 117 118 /* 119 * DDR Setup 120 */ 121 #define CONFIG_VERY_BIG_RAM 122 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 123 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 124 125 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 126 #define CONFIG_CHIP_SELECTS_PER_CTRL 4 127 #define CONFIG_FSL_DDR_FIRST_SLOT_QUAD_CAPABLE 128 129 #define CONFIG_DDR_SPD 130 131 /* 132 * IFC Definitions 133 */ 134 #define CONFIG_SYS_FLASH_BASE 0xe0000000 135 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 136 137 #ifdef CONFIG_SPL_BUILD 138 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 139 #else 140 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 141 #endif 142 143 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 144 #define CONFIG_MISC_INIT_R 145 146 #define CONFIG_HWCONFIG 147 148 /* define to use L1 as initial stack */ 149 #define CONFIG_L1_INIT_RAM 150 #define CONFIG_SYS_INIT_RAM_LOCK 151 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 152 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 153 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 154 /* The assembler doesn't like typecast */ 155 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 156 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 157 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 158 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 159 160 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 161 GENERATED_GBL_DATA_SIZE) 162 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 163 164 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 165 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 166 167 /* Serial Port - controlled on board with jumper J8 168 * open - index 2 169 * shorted - index 1 170 */ 171 #define CONFIG_CONS_INDEX 1 172 #define CONFIG_SYS_NS16550_SERIAL 173 #define CONFIG_SYS_NS16550_REG_SIZE 1 174 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 175 176 #define CONFIG_SYS_BAUDRATE_TABLE \ 177 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 178 179 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 180 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 181 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 182 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 183 184 /* I2C */ 185 #define CONFIG_SYS_I2C 186 #define CONFIG_SYS_I2C_FSL 187 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 188 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 189 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 190 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 191 192 /* 193 * General PCI 194 * Memory space is mapped 1-1, but I/O space must start from 0. 195 */ 196 197 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 198 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 199 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 200 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 201 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 202 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 203 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 204 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 205 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 206 207 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 208 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 209 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 210 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 211 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 212 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 213 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 214 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 215 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 216 217 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 218 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 219 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 220 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull 221 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 222 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 223 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 224 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 225 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 226 227 /* controller 4, Base address 203000 */ 228 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 229 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc60000000ull 230 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x20000000 /* 512M */ 231 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 232 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 233 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 234 235 #ifdef CONFIG_PCI 236 #define CONFIG_PCI_INDIRECT_BRIDGE 237 238 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 239 #endif /* CONFIG_PCI */ 240 241 /* SATA */ 242 #ifdef CONFIG_FSL_SATA_V2 243 #define CONFIG_LIBATA 244 #define CONFIG_FSL_SATA 245 246 #define CONFIG_SYS_SATA_MAX_DEVICE 2 247 #define CONFIG_SATA1 248 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 249 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 250 #define CONFIG_SATA2 251 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 252 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 253 254 #define CONFIG_LBA48 255 #endif 256 257 #ifdef CONFIG_FMAN_ENET 258 #define CONFIG_MII /* MII PHY management */ 259 #define CONFIG_ETHPRIME "FM1@DTSEC1" 260 #endif 261 262 /* 263 * Environment 264 */ 265 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 266 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 267 268 /* 269 * Command line configuration. 270 */ 271 272 /* 273 * Miscellaneous configurable options 274 */ 275 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 276 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 277 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 278 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 279 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 280 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 281 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE/* Boot Argument Buffer Size */ 282 283 /* 284 * For booting Linux, the board info and command line data 285 * have to be in the first 64 MB of memory, since this is 286 * the maximum mapped by the Linux kernel during initialization. 287 */ 288 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 289 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 290 291 #ifdef CONFIG_CMD_KGDB 292 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 293 #endif 294 295 /* 296 * Environment Configuration 297 */ 298 #define CONFIG_ROOTPATH "/opt/nfsroot" 299 #define CONFIG_BOOTFILE "uImage" 300 #define CONFIG_UBOOTPATH "u-boot.bin" /* U-Boot image on TFTP server*/ 301 302 /* default location for tftp and bootm */ 303 #define CONFIG_LOADADDR 1000000 304 305 #define CONFIG_HVBOOT \ 306 "setenv bootargs config-addr=0x60000000; " \ 307 "bootm 0x01000000 - 0x00f00000" 308 309 #ifndef CONFIG_MTD_NOR_FLASH 310 #else 311 #define CONFIG_FLASH_CFI_DRIVER 312 #define CONFIG_SYS_FLASH_CFI 313 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 314 #endif 315 316 #if defined(CONFIG_SPIFLASH) 317 #define CONFIG_SYS_EXTRA_ENV_RELOC 318 #define CONFIG_ENV_SPI_BUS 0 319 #define CONFIG_ENV_SPI_CS 0 320 #define CONFIG_ENV_SPI_MAX_HZ 10000000 321 #define CONFIG_ENV_SPI_MODE 0 322 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 323 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 324 #define CONFIG_ENV_SECT_SIZE 0x10000 325 #elif defined(CONFIG_SDCARD) 326 #define CONFIG_SYS_EXTRA_ENV_RELOC 327 #define CONFIG_SYS_MMC_ENV_DEV 0 328 #define CONFIG_ENV_SIZE 0x2000 329 #define CONFIG_ENV_OFFSET (512 * 0x800) 330 #elif defined(CONFIG_NAND) 331 #define CONFIG_SYS_EXTRA_ENV_RELOC 332 #define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE 333 #define CONFIG_ENV_OFFSET (7 * CONFIG_SYS_NAND_BLOCK_SIZE) 334 #elif defined(CONFIG_ENV_IS_NOWHERE) 335 #define CONFIG_ENV_SIZE 0x2000 336 #else 337 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 338 #define CONFIG_ENV_SIZE 0x2000 339 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 340 #endif 341 342 #define CONFIG_SYS_CLK_FREQ 66666666 343 #define CONFIG_DDR_CLK_FREQ 133333333 344 345 #ifndef __ASSEMBLY__ 346 unsigned long get_board_sys_clk(void); 347 unsigned long get_board_ddr_clk(void); 348 #endif 349 350 /* 351 * DDR Setup 352 */ 353 #define CONFIG_SYS_SPD_BUS_NUM 0 354 #define SPD_EEPROM_ADDRESS1 0x52 355 #define SPD_EEPROM_ADDRESS2 0x54 356 #define SPD_EEPROM_ADDRESS3 0x56 357 #define SPD_EEPROM_ADDRESS SPD_EEPROM_ADDRESS1 /* for p3041/p5010 */ 358 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 359 360 /* 361 * IFC Definitions 362 */ 363 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 364 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS \ 365 + 0x8000000) | \ 366 CSPR_PORT_SIZE_16 | \ 367 CSPR_MSEL_NOR | \ 368 CSPR_V) 369 #define CONFIG_SYS_NOR1_CSPR_EXT (0xf) 370 #define CONFIG_SYS_NOR1_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 371 CSPR_PORT_SIZE_16 | \ 372 CSPR_MSEL_NOR | \ 373 CSPR_V) 374 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 375 /* NOR Flash Timing Params */ 376 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 377 378 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 379 FTIM0_NOR_TEADC(0x5) | \ 380 FTIM0_NOR_TEAHC(0x5)) 381 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 382 FTIM1_NOR_TRAD_NOR(0x1A) |\ 383 FTIM1_NOR_TSEQRAD_NOR(0x13)) 384 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 385 FTIM2_NOR_TCH(0x4) | \ 386 FTIM2_NOR_TWPH(0x0E) | \ 387 FTIM2_NOR_TWP(0x1c)) 388 #define CONFIG_SYS_NOR_FTIM3 0x0 389 390 #define CONFIG_SYS_FLASH_QUIET_TEST 391 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 392 393 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 394 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 395 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 396 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 397 398 #define CONFIG_SYS_FLASH_EMPTY_INFO 399 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS \ 400 + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 401 402 /* NAND Flash on IFC */ 403 #define CONFIG_NAND_FSL_IFC 404 #define CONFIG_SYS_NAND_MAX_ECCPOS 256 405 #define CONFIG_SYS_NAND_MAX_OOBFREE 2 406 #define CONFIG_SYS_NAND_BASE 0xff800000 407 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 408 409 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 410 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 411 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 412 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 413 | CSPR_V) 414 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 415 416 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 417 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 418 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 419 | CSOR_NAND_RAL_3 /* RAL = 2Byes */ \ 420 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ 421 | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ 422 | CSOR_NAND_PB(128)) /*Page Per Block = 128*/ 423 424 #define CONFIG_SYS_NAND_ONFI_DETECTION 425 426 /* ONFI NAND Flash mode0 Timing Params */ 427 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 428 FTIM0_NAND_TWP(0x18) | \ 429 FTIM0_NAND_TWCHT(0x07) | \ 430 FTIM0_NAND_TWH(0x0a)) 431 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 432 FTIM1_NAND_TWBE(0x39) | \ 433 FTIM1_NAND_TRR(0x0e) | \ 434 FTIM1_NAND_TRP(0x18)) 435 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 436 FTIM2_NAND_TREH(0x0a) | \ 437 FTIM2_NAND_TWHRE(0x1e)) 438 #define CONFIG_SYS_NAND_FTIM3 0x0 439 440 #define CONFIG_SYS_NAND_DDR_LAW 11 441 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 442 #define CONFIG_SYS_MAX_NAND_DEVICE 1 443 444 #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) 445 446 #if defined(CONFIG_NAND) 447 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 448 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 449 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 450 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 451 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 452 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 453 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 454 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 455 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR0_CSPR_EXT 456 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR0_CSPR 457 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 458 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 459 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 460 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 461 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 462 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 463 #else 464 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 465 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 466 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 467 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 468 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 469 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 470 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 471 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 472 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT 473 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 474 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 475 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 476 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 477 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 478 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 479 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 480 #endif 481 #define CONFIG_SYS_CSPR2_EXT CONFIG_SYS_NOR1_CSPR_EXT 482 #define CONFIG_SYS_CSPR2 CONFIG_SYS_NOR1_CSPR 483 #define CONFIG_SYS_AMASK2 CONFIG_SYS_NOR_AMASK 484 #define CONFIG_SYS_CSOR2 CONFIG_SYS_NOR_CSOR 485 #define CONFIG_SYS_CS2_FTIM0 CONFIG_SYS_NOR_FTIM0 486 #define CONFIG_SYS_CS2_FTIM1 CONFIG_SYS_NOR_FTIM1 487 #define CONFIG_SYS_CS2_FTIM2 CONFIG_SYS_NOR_FTIM2 488 #define CONFIG_SYS_CS2_FTIM3 CONFIG_SYS_NOR_FTIM3 489 490 /* CPLD on IFC */ 491 #define CONFIG_SYS_CPLD_BASE 0xffdf0000 492 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) 493 #define CONFIG_SYS_CSPR3_EXT (0xf) 494 #define CONFIG_SYS_CSPR3 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE_PHYS) \ 495 | CSPR_PORT_SIZE_8 \ 496 | CSPR_MSEL_GPCM \ 497 | CSPR_V) 498 499 #define CONFIG_SYS_AMASK3 IFC_AMASK(4*1024) 500 #define CONFIG_SYS_CSOR3 0x0 501 502 /* CPLD Timing parameters for IFC CS3 */ 503 #define CONFIG_SYS_CS3_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 504 FTIM0_GPCM_TEADC(0x0e) | \ 505 FTIM0_GPCM_TEAHC(0x0e)) 506 #define CONFIG_SYS_CS3_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 507 FTIM1_GPCM_TRAD(0x1f)) 508 #define CONFIG_SYS_CS3_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 509 FTIM2_GPCM_TCH(0x8) | \ 510 FTIM2_GPCM_TWP(0x1f)) 511 #define CONFIG_SYS_CS3_FTIM3 0x0 512 513 #if defined(CONFIG_RAMBOOT_PBL) 514 #define CONFIG_SYS_RAMBOOT 515 #endif 516 517 /* I2C */ 518 #define CONFIG_SYS_FSL_I2C_SPEED 100000 /* I2C speed */ 519 #define CONFIG_SYS_FSL_I2C2_SPEED 100000 /* I2C2 speed */ 520 #define I2C_MUX_PCA_ADDR_PRI 0x77 /* I2C bus multiplexer,primary */ 521 #define I2C_MUX_PCA_ADDR_SEC 0x76 /* I2C bus multiplexer,secondary */ 522 523 #define I2C_MUX_CH_DEFAULT 0x8 524 #define I2C_MUX_CH_VOL_MONITOR 0xa 525 #define I2C_MUX_CH_VSC3316_FS 0xc 526 #define I2C_MUX_CH_VSC3316_BS 0xd 527 528 /* Voltage monitor on channel 2*/ 529 #define I2C_VOL_MONITOR_ADDR 0x40 530 #define I2C_VOL_MONITOR_BUS_V_OFFSET 0x2 531 #define I2C_VOL_MONITOR_BUS_V_OVF 0x1 532 #define I2C_VOL_MONITOR_BUS_V_SHIFT 3 533 534 #define CONFIG_VID_FLS_ENV "t4240rdb_vdd_mv" 535 #ifndef CONFIG_SPL_BUILD 536 #define CONFIG_VID 537 #endif 538 #define CONFIG_VOL_MONITOR_IR36021_SET 539 #define CONFIG_VOL_MONITOR_IR36021_READ 540 /* The lowest and highest voltage allowed for T4240RDB */ 541 #define VDD_MV_MIN 819 542 #define VDD_MV_MAX 1212 543 544 /* 545 * eSPI - Enhanced SPI 546 */ 547 #define CONFIG_SF_DEFAULT_SPEED 10000000 548 #define CONFIG_SF_DEFAULT_MODE 0 549 550 /* Qman/Bman */ 551 #ifndef CONFIG_NOBQFMAN 552 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 553 #define CONFIG_SYS_BMAN_NUM_PORTALS 50 554 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 555 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 556 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 557 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 558 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 559 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 560 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 561 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 562 CONFIG_SYS_BMAN_CENA_SIZE) 563 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 564 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 565 #define CONFIG_SYS_QMAN_NUM_PORTALS 50 566 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 567 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 568 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 569 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 570 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 571 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 572 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 573 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 574 CONFIG_SYS_QMAN_CENA_SIZE) 575 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 576 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 577 578 #define CONFIG_SYS_DPAA_FMAN 579 #define CONFIG_SYS_DPAA_PME 580 #define CONFIG_SYS_PMAN 581 #define CONFIG_SYS_DPAA_DCE 582 #define CONFIG_SYS_DPAA_RMAN 583 #define CONFIG_SYS_INTERLAKEN 584 585 /* Default address of microcode for the Linux Fman driver */ 586 #if defined(CONFIG_SPIFLASH) 587 /* 588 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 589 * env, so we got 0x110000. 590 */ 591 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 592 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 593 #elif defined(CONFIG_SDCARD) 594 /* 595 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 596 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 597 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080. 598 */ 599 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 600 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 601 #elif defined(CONFIG_NAND) 602 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 603 #define CONFIG_SYS_FMAN_FW_ADDR (8 * CONFIG_SYS_NAND_BLOCK_SIZE) 604 #else 605 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 606 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 607 #endif 608 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 609 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 610 #endif /* CONFIG_NOBQFMAN */ 611 612 #ifdef CONFIG_SYS_DPAA_FMAN 613 #define CONFIG_FMAN_ENET 614 #define CONFIG_PHYLIB_10G 615 #define CONFIG_PHY_VITESSE 616 #define CONFIG_PHY_CORTINA 617 #define CONFIG_SYS_CORTINA_FW_IN_NOR 618 #define CONFIG_CORTINA_FW_ADDR 0xefe00000 619 #define CONFIG_CORTINA_FW_LENGTH 0x40000 620 #define CONFIG_PHY_TERANETICS 621 #define SGMII_PHY_ADDR1 0x0 622 #define SGMII_PHY_ADDR2 0x1 623 #define SGMII_PHY_ADDR3 0x2 624 #define SGMII_PHY_ADDR4 0x3 625 #define SGMII_PHY_ADDR5 0x4 626 #define SGMII_PHY_ADDR6 0x5 627 #define SGMII_PHY_ADDR7 0x6 628 #define SGMII_PHY_ADDR8 0x7 629 #define FM1_10GEC1_PHY_ADDR 0x10 630 #define FM1_10GEC2_PHY_ADDR 0x11 631 #define FM2_10GEC1_PHY_ADDR 0x12 632 #define FM2_10GEC2_PHY_ADDR 0x13 633 #define CORTINA_PHY_ADDR1 FM1_10GEC1_PHY_ADDR 634 #define CORTINA_PHY_ADDR2 FM1_10GEC2_PHY_ADDR 635 #define CORTINA_PHY_ADDR3 FM2_10GEC1_PHY_ADDR 636 #define CORTINA_PHY_ADDR4 FM2_10GEC2_PHY_ADDR 637 #endif 638 639 /* SATA */ 640 #ifdef CONFIG_FSL_SATA_V2 641 #define CONFIG_LIBATA 642 #define CONFIG_FSL_SATA 643 644 #define CONFIG_SYS_SATA_MAX_DEVICE 2 645 #define CONFIG_SATA1 646 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 647 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 648 #define CONFIG_SATA2 649 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 650 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 651 652 #define CONFIG_LBA48 653 #endif 654 655 #ifdef CONFIG_FMAN_ENET 656 #define CONFIG_MII /* MII PHY management */ 657 #define CONFIG_ETHPRIME "FM1@DTSEC1" 658 #endif 659 660 /* 661 * USB 662 */ 663 #define CONFIG_USB_EHCI_FSL 664 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 665 #define CONFIG_HAS_FSL_DR_USB 666 667 #ifdef CONFIG_MMC 668 #define CONFIG_FSL_ESDHC 669 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 670 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 671 #define CONFIG_SYS_FSL_MMC_HAS_CAPBLT_VS33 672 #endif 673 674 675 #define __USB_PHY_TYPE utmi 676 677 /* 678 * T4240 has 3 DDR controllers. Default to 3-way interleaving. It can be 679 * 3way_1KB, 3way_4KB, 3way_8KB. T4160 has 2 DDR controllers. Default to 2-way 680 * interleaving. It can be cacheline, page, bank, superbank. 681 * See doc/README.fsl-ddr for details. 682 */ 683 #ifdef CONFIG_ARCH_T4240 684 #define CTRL_INTLV_PREFERED 3way_4KB 685 #else 686 #define CTRL_INTLV_PREFERED cacheline 687 #endif 688 689 #define CONFIG_EXTRA_ENV_SETTINGS \ 690 "hwconfig=fsl_ddr:" \ 691 "ctlr_intlv=" __stringify(CTRL_INTLV_PREFERED) "," \ 692 "bank_intlv=auto;" \ 693 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0"\ 694 "netdev=eth0\0" \ 695 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 696 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 697 "tftpflash=tftpboot $loadaddr $uboot && " \ 698 "protect off $ubootaddr +$filesize && " \ 699 "erase $ubootaddr +$filesize && " \ 700 "cp.b $loadaddr $ubootaddr $filesize && " \ 701 "protect on $ubootaddr +$filesize && " \ 702 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 703 "consoledev=ttyS0\0" \ 704 "ramdiskaddr=2000000\0" \ 705 "ramdiskfile=t4240rdb/ramdisk.uboot\0" \ 706 "fdtaddr=1e00000\0" \ 707 "fdtfile=t4240rdb/t4240rdb.dtb\0" \ 708 "bdev=sda3\0" 709 710 #define CONFIG_HVBOOT \ 711 "setenv bootargs config-addr=0x60000000; " \ 712 "bootm 0x01000000 - 0x00f00000" 713 714 #define CONFIG_LINUX \ 715 "setenv bootargs root=/dev/ram rw " \ 716 "console=$consoledev,$baudrate $othbootargs;" \ 717 "setenv ramdiskaddr 0x02000000;" \ 718 "setenv fdtaddr 0x00c00000;" \ 719 "setenv loadaddr 0x1000000;" \ 720 "bootm $loadaddr $ramdiskaddr $fdtaddr" 721 722 #define CONFIG_HDBOOT \ 723 "setenv bootargs root=/dev/$bdev rw " \ 724 "console=$consoledev,$baudrate $othbootargs;" \ 725 "tftp $loadaddr $bootfile;" \ 726 "tftp $fdtaddr $fdtfile;" \ 727 "bootm $loadaddr - $fdtaddr" 728 729 #define CONFIG_NFSBOOTCOMMAND \ 730 "setenv bootargs root=/dev/nfs rw " \ 731 "nfsroot=$serverip:$rootpath " \ 732 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 733 "console=$consoledev,$baudrate $othbootargs;" \ 734 "tftp $loadaddr $bootfile;" \ 735 "tftp $fdtaddr $fdtfile;" \ 736 "bootm $loadaddr - $fdtaddr" 737 738 #define CONFIG_RAMBOOTCOMMAND \ 739 "setenv bootargs root=/dev/ram rw " \ 740 "console=$consoledev,$baudrate $othbootargs;" \ 741 "tftp $ramdiskaddr $ramdiskfile;" \ 742 "tftp $loadaddr $bootfile;" \ 743 "tftp $fdtaddr $fdtfile;" \ 744 "bootm $loadaddr $ramdiskaddr $fdtaddr" 745 746 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 747 748 #include <asm/fsl_secure_boot.h> 749 750 #endif /* __CONFIG_H */ 751