1 /* 2 * Copyright 2014 Freescale Semiconductor, Inc. 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* 8 * T1024/T1023 RDB board configuration file 9 */ 10 11 #ifndef __T1024RDB_H 12 #define __T1024RDB_H 13 14 /* High Level Configuration Options */ 15 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 16 #define CONFIG_MP /* support multiple processors */ 17 #define CONFIG_ENABLE_36BIT_PHYS 18 19 #ifdef CONFIG_PHYS_64BIT 20 #define CONFIG_ADDR_MAP 1 21 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 22 #endif 23 24 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 25 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 26 #define CONFIG_FSL_IFC /* Enable IFC Support */ 27 28 #define CONFIG_ENV_OVERWRITE 29 30 #define CONFIG_FSL_CAAM /* Enable SEC/CAAM */ 31 32 /* support deep sleep */ 33 #ifdef CONFIG_ARCH_T1024 34 #define CONFIG_DEEP_SLEEP 35 #endif 36 #if defined(CONFIG_DEEP_SLEEP) 37 #define CONFIG_BOARD_EARLY_INIT_F 38 #endif 39 40 #ifdef CONFIG_RAMBOOT_PBL 41 #define CONFIG_SYS_FSL_PBL_PBI board/freescale/t102xrdb/t1024_pbi.cfg 42 #define CONFIG_SPL_FLUSH_IMAGE 43 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 44 #define CONFIG_SYS_TEXT_BASE 0x30001000 45 #define CONFIG_SPL_TEXT_BASE 0xFFFD8000 46 #define CONFIG_SPL_PAD_TO 0x40000 47 #define CONFIG_SPL_MAX_SIZE 0x28000 48 #define RESET_VECTOR_OFFSET 0x27FFC 49 #define BOOT_PAGE_OFFSET 0x27000 50 #ifdef CONFIG_SPL_BUILD 51 #define CONFIG_SPL_SKIP_RELOCATE 52 #define CONFIG_SPL_COMMON_INIT_DDR 53 #define CONFIG_SYS_CCSR_DO_NOT_RELOCATE 54 #define CONFIG_SYS_NO_FLASH 55 #endif 56 57 #ifdef CONFIG_NAND 58 #define CONFIG_SYS_NAND_U_BOOT_SIZE (768 << 10) 59 #define CONFIG_SYS_NAND_U_BOOT_DST 0x30000000 60 #define CONFIG_SYS_NAND_U_BOOT_START 0x30000000 61 #define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) 62 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot-nand.lds" 63 #if defined(CONFIG_T1024RDB) 64 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_nand_rcw.cfg 65 #elif defined(CONFIG_T1023RDB) 66 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_nand_rcw.cfg 67 #endif 68 #define CONFIG_SPL_NAND_BOOT 69 #endif 70 71 #ifdef CONFIG_SPIFLASH 72 #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC 73 #define CONFIG_SPL_SPI_FLASH_MINIMAL 74 #define CONFIG_SYS_SPI_FLASH_U_BOOT_SIZE (768 << 10) 75 #define CONFIG_SYS_SPI_FLASH_U_BOOT_DST (0x30000000) 76 #define CONFIG_SYS_SPI_FLASH_U_BOOT_START (0x30000000) 77 #define CONFIG_SYS_SPI_FLASH_U_BOOT_OFFS (256 << 10) 78 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 79 #ifndef CONFIG_SPL_BUILD 80 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 81 #endif 82 #if defined(CONFIG_T1024RDB) 83 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_spi_rcw.cfg 84 #elif defined(CONFIG_T1023RDB) 85 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_spi_rcw.cfg 86 #endif 87 #define CONFIG_SPL_SPI_BOOT 88 #endif 89 90 #ifdef CONFIG_SDCARD 91 #define CONFIG_RESET_VECTOR_ADDRESS 0x30000FFC 92 #define CONFIG_SPL_MMC_MINIMAL 93 #define CONFIG_SYS_MMC_U_BOOT_SIZE (768 << 10) 94 #define CONFIG_SYS_MMC_U_BOOT_DST (0x30000000) 95 #define CONFIG_SYS_MMC_U_BOOT_START (0x30000000) 96 #define CONFIG_SYS_MMC_U_BOOT_OFFS (260 << 10) 97 #define CONFIG_SYS_LDSCRIPT "arch/powerpc/cpu/mpc85xx/u-boot.lds" 98 #ifndef CONFIG_SPL_BUILD 99 #define CONFIG_SYS_MPC85XX_NO_RESETVEC 100 #endif 101 #if defined(CONFIG_T1024RDB) 102 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1024_sd_rcw.cfg 103 #elif defined(CONFIG_T1023RDB) 104 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t102xrdb/t1023_sd_rcw.cfg 105 #endif 106 #define CONFIG_SPL_MMC_BOOT 107 #endif 108 109 #endif /* CONFIG_RAMBOOT_PBL */ 110 111 #ifndef CONFIG_SYS_TEXT_BASE 112 #define CONFIG_SYS_TEXT_BASE 0xeff40000 113 #endif 114 115 #ifndef CONFIG_RESET_VECTOR_ADDRESS 116 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 117 #endif 118 119 #ifndef CONFIG_SYS_NO_FLASH 120 #define CONFIG_FLASH_CFI_DRIVER 121 #define CONFIG_SYS_FLASH_CFI 122 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 123 #endif 124 125 /* PCIe Boot - Master */ 126 #define CONFIG_SRIO_PCIE_BOOT_MASTER 127 /* 128 * for slave u-boot IMAGE instored in master memory space, 129 * PHYS must be aligned based on the SIZE 130 */ 131 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS1 0xfff00000ull 132 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_SIZE 0x100000 /* 1M */ 133 #ifdef CONFIG_PHYS_64BIT 134 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xfef200000ull 135 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0x3fff00000ull 136 #else 137 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_PHYS 0xef200000 138 #define CONFIG_SRIO_PCIE_BOOT_IMAGE_MEM_BUS2 0xfff00000 139 #endif 140 /* 141 * for slave UCODE and ENV instored in master memory space, 142 * PHYS must be aligned based on the SIZE 143 */ 144 #ifdef CONFIG_PHYS_64BIT 145 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xfef100000ull 146 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0x3ffe00000ull 147 #else 148 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_PHYS 0xef100000 149 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_MEM_BUS 0xffe00000 150 #endif 151 #define CONFIG_SRIO_PCIE_BOOT_UCODE_ENV_SIZE 0x40000 /* 256K */ 152 /* slave core release by master*/ 153 #define CONFIG_SRIO_PCIE_BOOT_BRR_OFFSET 0xe00e4 154 #define CONFIG_SRIO_PCIE_BOOT_RELEASE_MASK 0x00000001 /* release core 0 */ 155 156 /* PCIe Boot - Slave */ 157 #ifdef CONFIG_SRIO_PCIE_BOOT_SLAVE 158 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR 0xFFE00000 159 #define CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR_PHYS \ 160 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_UCODE_ENV_ADDR) 161 /* Set 1M boot space for PCIe boot */ 162 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR (CONFIG_SYS_TEXT_BASE & 0xfff00000) 163 #define CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR_PHYS \ 164 (0x300000000ull | CONFIG_SYS_SRIO_PCIE_BOOT_SLAVE_ADDR) 165 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 166 #define CONFIG_SYS_NO_FLASH 167 #endif 168 169 #if defined(CONFIG_SPIFLASH) 170 #define CONFIG_SYS_EXTRA_ENV_RELOC 171 #define CONFIG_ENV_IS_IN_SPI_FLASH 172 #define CONFIG_ENV_SPI_BUS 0 173 #define CONFIG_ENV_SPI_CS 0 174 #define CONFIG_ENV_SPI_MAX_HZ 10000000 175 #define CONFIG_ENV_SPI_MODE 0 176 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 177 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 178 #if defined(CONFIG_T1024RDB) 179 #define CONFIG_ENV_SECT_SIZE 0x10000 180 #elif defined(CONFIG_T1023RDB) 181 #define CONFIG_ENV_SECT_SIZE 0x40000 182 #endif 183 #elif defined(CONFIG_SDCARD) 184 #define CONFIG_SYS_EXTRA_ENV_RELOC 185 #define CONFIG_ENV_IS_IN_MMC 186 #define CONFIG_SYS_MMC_ENV_DEV 0 187 #define CONFIG_ENV_SIZE 0x2000 188 #define CONFIG_ENV_OFFSET (512 * 0x800) 189 #elif defined(CONFIG_NAND) 190 #define CONFIG_SYS_EXTRA_ENV_RELOC 191 #define CONFIG_ENV_IS_IN_NAND 192 #define CONFIG_ENV_SIZE 0x2000 193 #if defined(CONFIG_T1024RDB) 194 #define CONFIG_ENV_OFFSET (2 * CONFIG_SYS_NAND_BLOCK_SIZE) 195 #elif defined(CONFIG_T1023RDB) 196 #define CONFIG_ENV_OFFSET (10 * CONFIG_SYS_NAND_BLOCK_SIZE) 197 #endif 198 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 199 #define CONFIG_ENV_IS_IN_REMOTE 200 #define CONFIG_ENV_ADDR 0xffe20000 201 #define CONFIG_ENV_SIZE 0x2000 202 #elif defined(CONFIG_ENV_IS_NOWHERE) 203 #define CONFIG_ENV_SIZE 0x2000 204 #else 205 #define CONFIG_ENV_IS_IN_FLASH 206 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 207 #define CONFIG_ENV_SIZE 0x2000 208 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 209 #endif 210 211 #ifndef __ASSEMBLY__ 212 unsigned long get_board_sys_clk(void); 213 unsigned long get_board_ddr_clk(void); 214 #endif 215 216 #define CONFIG_SYS_CLK_FREQ 100000000 217 #define CONFIG_DDR_CLK_FREQ 100000000 218 219 /* 220 * These can be toggled for performance analysis, otherwise use default. 221 */ 222 #define CONFIG_SYS_CACHE_STASHING 223 #define CONFIG_BACKSIDE_L2_CACHE 224 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 225 #define CONFIG_BTB /* toggle branch predition */ 226 #define CONFIG_DDR_ECC 227 #ifdef CONFIG_DDR_ECC 228 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 229 #define CONFIG_MEM_INIT_VALUE 0xdeadbeef 230 #endif 231 232 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 233 #define CONFIG_SYS_MEMTEST_END 0x00400000 234 #define CONFIG_SYS_ALT_MEMTEST 235 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 236 237 /* 238 * Config the L3 Cache as L3 SRAM 239 */ 240 #define CONFIG_SYS_INIT_L3_ADDR 0xFFFC0000 241 #define CONFIG_SYS_L3_SIZE (256 << 10) 242 #define CONFIG_SPL_GD_ADDR (CONFIG_SYS_INIT_L3_ADDR + 32 * 1024) 243 #ifdef CONFIG_RAMBOOT_PBL 244 #define CONFIG_ENV_ADDR (CONFIG_SPL_GD_ADDR + 4 * 1024) 245 #endif 246 #define CONFIG_SPL_RELOC_MALLOC_ADDR (CONFIG_SPL_GD_ADDR + 12 * 1024) 247 #define CONFIG_SPL_RELOC_MALLOC_SIZE (30 << 10) 248 #define CONFIG_SPL_RELOC_STACK (CONFIG_SPL_GD_ADDR + 64 * 1024) 249 #define CONFIG_SPL_RELOC_STACK_SIZE (22 << 10) 250 251 #ifdef CONFIG_PHYS_64BIT 252 #define CONFIG_SYS_DCSRBAR 0xf0000000 253 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 254 #endif 255 256 /* EEPROM */ 257 #define CONFIG_ID_EEPROM 258 #define CONFIG_SYS_I2C_EEPROM_NXID 259 #define CONFIG_SYS_EEPROM_BUS_NUM 0 260 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 261 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 262 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 263 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 264 265 /* 266 * DDR Setup 267 */ 268 #define CONFIG_VERY_BIG_RAM 269 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 270 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 271 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 272 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 273 #define CONFIG_FSL_DDR_INTERACTIVE 274 #if defined(CONFIG_T1024RDB) 275 #define CONFIG_DDR_SPD 276 #define CONFIG_SYS_FSL_DDR3 277 #define CONFIG_SYS_SPD_BUS_NUM 0 278 #define SPD_EEPROM_ADDRESS 0x51 279 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 280 #elif defined(CONFIG_T1023RDB) 281 #define CONFIG_SYS_FSL_DDR4 282 #define CONFIG_SYS_DDR_RAW_TIMING 283 #define CONFIG_SYS_SDRAM_SIZE 2048 284 #endif 285 286 /* 287 * IFC Definitions 288 */ 289 #define CONFIG_SYS_FLASH_BASE 0xe8000000 290 #ifdef CONFIG_PHYS_64BIT 291 #define CONFIG_SYS_FLASH_BASE_PHYS (0xf00000000ull | CONFIG_SYS_FLASH_BASE) 292 #else 293 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 294 #endif 295 296 #define CONFIG_SYS_NOR0_CSPR_EXT (0xf) 297 #define CONFIG_SYS_NOR0_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | \ 298 CSPR_PORT_SIZE_16 | \ 299 CSPR_MSEL_NOR | \ 300 CSPR_V) 301 #define CONFIG_SYS_NOR_AMASK IFC_AMASK(128*1024*1024) 302 303 /* NOR Flash Timing Params */ 304 #if defined(CONFIG_T1024RDB) 305 #define CONFIG_SYS_NOR_CSOR CSOR_NAND_TRHZ_80 306 #elif defined(CONFIG_T1023RDB) 307 #define CONFIG_SYS_NOR_CSOR (CSOR_NOR_ADM_SHIFT(0) | \ 308 CSOR_NAND_TRHZ_80 | CSOR_NOR_ADM_SHFT_MODE_EN) 309 #endif 310 #define CONFIG_SYS_NOR_FTIM0 (FTIM0_NOR_TACSE(0x4) | \ 311 FTIM0_NOR_TEADC(0x5) | \ 312 FTIM0_NOR_TEAHC(0x5)) 313 #define CONFIG_SYS_NOR_FTIM1 (FTIM1_NOR_TACO(0x35) | \ 314 FTIM1_NOR_TRAD_NOR(0x1A) |\ 315 FTIM1_NOR_TSEQRAD_NOR(0x13)) 316 #define CONFIG_SYS_NOR_FTIM2 (FTIM2_NOR_TCS(0x4) | \ 317 FTIM2_NOR_TCH(0x4) | \ 318 FTIM2_NOR_TWPH(0x0E) | \ 319 FTIM2_NOR_TWP(0x1c)) 320 #define CONFIG_SYS_NOR_FTIM3 0x0 321 322 #define CONFIG_SYS_FLASH_QUIET_TEST 323 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 324 325 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 326 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 327 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 328 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 329 330 #define CONFIG_SYS_FLASH_EMPTY_INFO 331 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 332 333 #ifdef CONFIG_T1024RDB 334 /* CPLD on IFC */ 335 #define CONFIG_SYS_CPLD_BASE 0xffdf0000 336 #define CONFIG_SYS_CPLD_BASE_PHYS (0xf00000000ull | CONFIG_SYS_CPLD_BASE) 337 #define CONFIG_SYS_CSPR2_EXT (0xf) 338 #define CONFIG_SYS_CSPR2 (CSPR_PHYS_ADDR(CONFIG_SYS_CPLD_BASE) \ 339 | CSPR_PORT_SIZE_8 \ 340 | CSPR_MSEL_GPCM \ 341 | CSPR_V) 342 #define CONFIG_SYS_AMASK2 IFC_AMASK(64*1024) 343 #define CONFIG_SYS_CSOR2 0x0 344 345 /* CPLD Timing parameters for IFC CS2 */ 346 #define CONFIG_SYS_CS2_FTIM0 (FTIM0_GPCM_TACSE(0x0e) | \ 347 FTIM0_GPCM_TEADC(0x0e) | \ 348 FTIM0_GPCM_TEAHC(0x0e)) 349 #define CONFIG_SYS_CS2_FTIM1 (FTIM1_GPCM_TACO(0x0e) | \ 350 FTIM1_GPCM_TRAD(0x1f)) 351 #define CONFIG_SYS_CS2_FTIM2 (FTIM2_GPCM_TCS(0x0e) | \ 352 FTIM2_GPCM_TCH(0x8) | \ 353 FTIM2_GPCM_TWP(0x1f)) 354 #define CONFIG_SYS_CS2_FTIM3 0x0 355 #endif 356 357 /* NAND Flash on IFC */ 358 #define CONFIG_NAND_FSL_IFC 359 #define CONFIG_SYS_NAND_BASE 0xff800000 360 #ifdef CONFIG_PHYS_64BIT 361 #define CONFIG_SYS_NAND_BASE_PHYS (0xf00000000ull | CONFIG_SYS_NAND_BASE) 362 #else 363 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 364 #endif 365 #define CONFIG_SYS_NAND_CSPR_EXT (0xf) 366 #define CONFIG_SYS_NAND_CSPR (CSPR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 367 | CSPR_PORT_SIZE_8 /* Port Size = 8 bit */ \ 368 | CSPR_MSEL_NAND /* MSEL = NAND */ \ 369 | CSPR_V) 370 #define CONFIG_SYS_NAND_AMASK IFC_AMASK(64*1024) 371 372 #if defined(CONFIG_T1024RDB) 373 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 374 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 375 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 376 | CSOR_NAND_RAL_3 /* RAL = 3Byes */ \ 377 | CSOR_NAND_PGS_4K /* Page Size = 4K */ \ 378 | CSOR_NAND_SPRZ_224 /* Spare size = 224 */ \ 379 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 380 #define CONFIG_SYS_NAND_BLOCK_SIZE (512 * 1024) 381 #elif defined(CONFIG_T1023RDB) 382 #define CONFIG_SYS_NAND_CSOR (CSOR_NAND_ECC_ENC_EN /* ECC on encode */ \ 383 | CSOR_NAND_ECC_DEC_EN /* ECC on decode */ \ 384 | CSOR_NAND_ECC_MODE_4 /* 4-bit ECC */ \ 385 | CSOR_NAND_RAL_3 /* RAL 3Bytes */ \ 386 | CSOR_NAND_PGS_2K /* Page Size = 2K */ \ 387 | CSOR_NAND_SPRZ_128 /* Spare size = 128 */ \ 388 | CSOR_NAND_PB(64)) /*Pages Per Block = 64*/ 389 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 390 #endif 391 392 #define CONFIG_SYS_NAND_ONFI_DETECTION 393 /* ONFI NAND Flash mode0 Timing Params */ 394 #define CONFIG_SYS_NAND_FTIM0 (FTIM0_NAND_TCCST(0x07) | \ 395 FTIM0_NAND_TWP(0x18) | \ 396 FTIM0_NAND_TWCHT(0x07) | \ 397 FTIM0_NAND_TWH(0x0a)) 398 #define CONFIG_SYS_NAND_FTIM1 (FTIM1_NAND_TADLE(0x32) | \ 399 FTIM1_NAND_TWBE(0x39) | \ 400 FTIM1_NAND_TRR(0x0e) | \ 401 FTIM1_NAND_TRP(0x18)) 402 #define CONFIG_SYS_NAND_FTIM2 (FTIM2_NAND_TRAD(0x0f) | \ 403 FTIM2_NAND_TREH(0x0a) | \ 404 FTIM2_NAND_TWHRE(0x1e)) 405 #define CONFIG_SYS_NAND_FTIM3 0x0 406 407 #define CONFIG_SYS_NAND_DDR_LAW 11 408 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE } 409 #define CONFIG_SYS_MAX_NAND_DEVICE 1 410 #define CONFIG_CMD_NAND 411 412 #if defined(CONFIG_NAND) 413 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NAND_CSPR_EXT 414 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NAND_CSPR 415 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NAND_AMASK 416 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NAND_CSOR 417 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NAND_FTIM0 418 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NAND_FTIM1 419 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NAND_FTIM2 420 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NAND_FTIM3 421 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NOR0_CSPR_EXT 422 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NOR0_CSPR 423 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NOR_AMASK 424 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NOR_CSOR 425 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NOR_FTIM0 426 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NOR_FTIM1 427 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NOR_FTIM2 428 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NOR_FTIM3 429 #else 430 #define CONFIG_SYS_CSPR0_EXT CONFIG_SYS_NOR0_CSPR_EXT 431 #define CONFIG_SYS_CSPR0 CONFIG_SYS_NOR0_CSPR 432 #define CONFIG_SYS_AMASK0 CONFIG_SYS_NOR_AMASK 433 #define CONFIG_SYS_CSOR0 CONFIG_SYS_NOR_CSOR 434 #define CONFIG_SYS_CS0_FTIM0 CONFIG_SYS_NOR_FTIM0 435 #define CONFIG_SYS_CS0_FTIM1 CONFIG_SYS_NOR_FTIM1 436 #define CONFIG_SYS_CS0_FTIM2 CONFIG_SYS_NOR_FTIM2 437 #define CONFIG_SYS_CS0_FTIM3 CONFIG_SYS_NOR_FTIM3 438 #define CONFIG_SYS_CSPR1_EXT CONFIG_SYS_NAND_CSPR_EXT 439 #define CONFIG_SYS_CSPR1 CONFIG_SYS_NAND_CSPR 440 #define CONFIG_SYS_AMASK1 CONFIG_SYS_NAND_AMASK 441 #define CONFIG_SYS_CSOR1 CONFIG_SYS_NAND_CSOR 442 #define CONFIG_SYS_CS1_FTIM0 CONFIG_SYS_NAND_FTIM0 443 #define CONFIG_SYS_CS1_FTIM1 CONFIG_SYS_NAND_FTIM1 444 #define CONFIG_SYS_CS1_FTIM2 CONFIG_SYS_NAND_FTIM2 445 #define CONFIG_SYS_CS1_FTIM3 CONFIG_SYS_NAND_FTIM3 446 #endif 447 448 #ifdef CONFIG_SPL_BUILD 449 #define CONFIG_SYS_MONITOR_BASE CONFIG_SPL_TEXT_BASE 450 #else 451 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 452 #endif 453 454 #if defined(CONFIG_RAMBOOT_PBL) 455 #define CONFIG_SYS_RAMBOOT 456 #endif 457 458 #define CONFIG_BOARD_EARLY_INIT_R 459 #define CONFIG_MISC_INIT_R 460 461 #define CONFIG_HWCONFIG 462 463 /* define to use L1 as initial stack */ 464 #define CONFIG_L1_INIT_RAM 465 #define CONFIG_SYS_INIT_RAM_LOCK 466 #define CONFIG_SYS_INIT_RAM_ADDR 0xfdd00000 /* Initial L1 address */ 467 #ifdef CONFIG_PHYS_64BIT 468 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 469 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW 0xfe03c000 470 /* The assembler doesn't like typecast */ 471 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 472 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 473 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 474 #else 475 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS 0xfe03c000 /* Initial L1 address */ 476 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 477 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 478 #endif 479 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 480 481 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 482 GENERATED_GBL_DATA_SIZE) 483 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 484 485 #define CONFIG_SYS_MONITOR_LEN (768 * 1024) 486 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 487 488 /* Serial Port */ 489 #define CONFIG_CONS_INDEX 1 490 #define CONFIG_SYS_NS16550_SERIAL 491 #define CONFIG_SYS_NS16550_REG_SIZE 1 492 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 493 494 #define CONFIG_SYS_BAUDRATE_TABLE \ 495 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 496 497 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 498 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 499 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 500 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 501 502 /* Video */ 503 #undef CONFIG_FSL_DIU_FB /* RDB doesn't support DIU */ 504 #ifdef CONFIG_FSL_DIU_FB 505 #define CONFIG_SYS_DIU_ADDR (CONFIG_SYS_CCSRBAR + 0x180000) 506 #define CONFIG_CMD_BMP 507 #define CONFIG_VIDEO_LOGO 508 #define CONFIG_VIDEO_BMP_LOGO 509 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 510 /* 511 * With CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS, flash I/O is really slow, so 512 * disable empty flash sector detection, which is I/O-intensive. 513 */ 514 #undef CONFIG_SYS_FLASH_EMPTY_INFO 515 #endif 516 517 /* I2C */ 518 #define CONFIG_SYS_I2C 519 #define CONFIG_SYS_I2C_FSL /* Use FSL common I2C driver */ 520 #define CONFIG_SYS_FSL_I2C_SPEED 50000 /* I2C speed in Hz */ 521 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 522 #define CONFIG_SYS_FSL_I2C2_SPEED 50000 /* I2C speed in Hz */ 523 #define CONFIG_SYS_FSL_I2C2_SLAVE 0x7F 524 #define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 525 #define CONFIG_SYS_FSL_I2C2_OFFSET 0x118100 526 527 #define I2C_PCA6408_BUS_NUM 1 528 #define I2C_PCA6408_ADDR 0x20 529 530 /* I2C bus multiplexer */ 531 #define I2C_MUX_CH_DEFAULT 0x8 532 533 /* 534 * RTC configuration 535 */ 536 #define RTC 537 #define CONFIG_RTC_DS1337 1 538 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 539 540 /* 541 * eSPI - Enhanced SPI 542 */ 543 #define CONFIG_SPI_FLASH_BAR 544 #define CONFIG_SF_DEFAULT_SPEED 10000000 545 #define CONFIG_SF_DEFAULT_MODE 0 546 547 /* 548 * General PCIe 549 * Memory space is mapped 1-1, but I/O space must start from 0. 550 */ 551 #define CONFIG_PCIE1 /* PCIE controller 1 */ 552 #define CONFIG_PCIE2 /* PCIE controller 2 */ 553 #define CONFIG_PCIE3 /* PCIE controller 3 */ 554 #ifdef CONFIG_ARCH_T1040 555 #define CONFIG_PCIE4 /* PCIE controller 4 */ 556 #endif 557 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 558 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 559 #define CONFIG_PCI_INDIRECT_BRIDGE 560 561 #ifdef CONFIG_PCI 562 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 563 #ifdef CONFIG_PCIE1 564 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 565 #ifdef CONFIG_PHYS_64BIT 566 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 567 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 568 #else 569 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 570 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 571 #endif 572 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 573 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 574 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 575 #ifdef CONFIG_PHYS_64BIT 576 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 577 #else 578 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 579 #endif 580 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 581 #endif 582 583 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 584 #ifdef CONFIG_PCIE2 585 #define CONFIG_SYS_PCIE2_MEM_VIRT 0x90000000 586 #ifdef CONFIG_PHYS_64BIT 587 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 588 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc10000000ull 589 #else 590 #define CONFIG_SYS_PCIE2_MEM_BUS 0x90000000 591 #define CONFIG_SYS_PCIE2_MEM_PHYS 0x90000000 592 #endif 593 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 /* 256M */ 594 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 595 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 596 #ifdef CONFIG_PHYS_64BIT 597 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 598 #else 599 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 600 #endif 601 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 602 #endif 603 604 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 605 #ifdef CONFIG_PCIE3 606 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 607 #ifdef CONFIG_PHYS_64BIT 608 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 609 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull 610 #else 611 #define CONFIG_SYS_PCIE3_MEM_BUS 0xa0000000 612 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xa0000000 613 #endif 614 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x10000000 /* 256M */ 615 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 616 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 617 #ifdef CONFIG_PHYS_64BIT 618 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 619 #else 620 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 621 #endif 622 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 623 #endif 624 625 /* controller 4, Base address 203000, to be removed */ 626 #ifdef CONFIG_PCIE4 627 #define CONFIG_SYS_PCIE4_MEM_VIRT 0xb0000000 628 #ifdef CONFIG_PHYS_64BIT 629 #define CONFIG_SYS_PCIE4_MEM_BUS 0xe0000000 630 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xc30000000ull 631 #else 632 #define CONFIG_SYS_PCIE4_MEM_BUS 0xb0000000 633 #define CONFIG_SYS_PCIE4_MEM_PHYS 0xb0000000 634 #endif 635 #define CONFIG_SYS_PCIE4_MEM_SIZE 0x10000000 /* 256M */ 636 #define CONFIG_SYS_PCIE4_IO_VIRT 0xf8030000 637 #define CONFIG_SYS_PCIE4_IO_BUS 0x00000000 638 #ifdef CONFIG_PHYS_64BIT 639 #define CONFIG_SYS_PCIE4_IO_PHYS 0xff8030000ull 640 #else 641 #define CONFIG_SYS_PCIE4_IO_PHYS 0xf8030000 642 #endif 643 #define CONFIG_SYS_PCIE4_IO_SIZE 0x00010000 /* 64k */ 644 #endif 645 646 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 647 #define CONFIG_DOS_PARTITION 648 #endif /* CONFIG_PCI */ 649 650 /* 651 * USB 652 */ 653 #define CONFIG_HAS_FSL_DR_USB 654 655 #ifdef CONFIG_HAS_FSL_DR_USB 656 #define CONFIG_USB_EHCI 657 #define CONFIG_USB_EHCI_FSL 658 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 659 #endif 660 661 /* 662 * SDHC 663 */ 664 #ifdef CONFIG_MMC 665 #define CONFIG_FSL_ESDHC 666 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 667 #define CONFIG_GENERIC_MMC 668 #define CONFIG_DOS_PARTITION 669 #endif 670 671 /* Qman/Bman */ 672 #ifndef CONFIG_NOBQFMAN 673 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 674 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 675 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 676 #ifdef CONFIG_PHYS_64BIT 677 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 678 #else 679 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 680 #endif 681 #define CONFIG_SYS_BMAN_MEM_SIZE 0x02000000 682 #define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 683 #define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 684 #define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE 685 #define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 686 #define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ 687 CONFIG_SYS_BMAN_CENA_SIZE) 688 #define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) 689 #define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 690 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 691 #define CONFIG_SYS_QMAN_MEM_BASE 0xf6000000 692 #ifdef CONFIG_PHYS_64BIT 693 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff6000000ull 694 #else 695 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 696 #endif 697 #define CONFIG_SYS_QMAN_MEM_SIZE 0x02000000 698 #define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 699 #define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 700 #define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE 701 #define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 702 #define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ 703 CONFIG_SYS_QMAN_CENA_SIZE) 704 #define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) 705 #define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 706 707 #define CONFIG_SYS_DPAA_FMAN 708 709 #ifdef CONFIG_T1024RDB 710 #define CONFIG_QE 711 #define CONFIG_U_QE 712 #endif 713 /* Default address of microcode for the Linux FMan driver */ 714 #if defined(CONFIG_SPIFLASH) 715 /* 716 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 717 * env, so we got 0x110000. 718 */ 719 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 720 #define CONFIG_SYS_FMAN_FW_ADDR 0x110000 721 #define CONFIG_SYS_QE_FW_ADDR 0x130000 722 #elif defined(CONFIG_SDCARD) 723 /* 724 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 725 * about 1MB (2048 blocks), Env is stored after the image, and the env size is 726 * 0x2000 (16 blocks), 8 + 2048 + 16 = 2072, enlarge it to 2080(0x820). 727 */ 728 #define CONFIG_SYS_QE_FMAN_FW_IN_MMC 729 #define CONFIG_SYS_FMAN_FW_ADDR (512 * 0x820) 730 #define CONFIG_SYS_QE_FW_ADDR (512 * 0x920) 731 #elif defined(CONFIG_NAND) 732 #define CONFIG_SYS_QE_FMAN_FW_IN_NAND 733 #if defined(CONFIG_T1024RDB) 734 #define CONFIG_SYS_FMAN_FW_ADDR (3 * CONFIG_SYS_NAND_BLOCK_SIZE) 735 #define CONFIG_SYS_QE_FW_ADDR (4 * CONFIG_SYS_NAND_BLOCK_SIZE) 736 #elif defined(CONFIG_T1023RDB) 737 #define CONFIG_SYS_FMAN_FW_ADDR (11 * CONFIG_SYS_NAND_BLOCK_SIZE) 738 #define CONFIG_SYS_QE_FW_ADDR (12 * CONFIG_SYS_NAND_BLOCK_SIZE) 739 #endif 740 #elif defined(CONFIG_SRIO_PCIE_BOOT_SLAVE) 741 /* 742 * Slave has no ucode locally, it can fetch this from remote. When implementing 743 * in two corenet boards, slave's ucode could be stored in master's memory 744 * space, the address can be mapped from slave TLB->slave LAW-> 745 * slave SRIO or PCIE outbound window->master inbound window-> 746 * master LAW->the ucode address in master's memory space. 747 */ 748 #define CONFIG_SYS_QE_FMAN_FW_IN_REMOTE 749 #define CONFIG_SYS_FMAN_FW_ADDR 0xFFE00000 750 #else 751 #define CONFIG_SYS_QE_FMAN_FW_IN_NOR 752 #define CONFIG_SYS_FMAN_FW_ADDR 0xEFF00000 753 #define CONFIG_SYS_QE_FW_ADDR 0xEFE00000 754 #endif 755 #define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 756 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) 757 #endif /* CONFIG_NOBQFMAN */ 758 759 #ifdef CONFIG_SYS_DPAA_FMAN 760 #define CONFIG_FMAN_ENET 761 #define CONFIG_PHYLIB_10G 762 #define CONFIG_PHY_REALTEK 763 #define CONFIG_PHY_AQUANTIA 764 #if defined(CONFIG_T1024RDB) 765 #define RGMII_PHY1_ADDR 0x2 766 #define RGMII_PHY2_ADDR 0x6 767 #define SGMII_AQR_PHY_ADDR 0x2 768 #define FM1_10GEC1_PHY_ADDR 0x1 769 #elif defined(CONFIG_T1023RDB) 770 #define RGMII_PHY1_ADDR 0x1 771 #define SGMII_RTK_PHY_ADDR 0x3 772 #define SGMII_AQR_PHY_ADDR 0x2 773 #endif 774 #endif 775 776 #ifdef CONFIG_FMAN_ENET 777 #define CONFIG_MII /* MII PHY management */ 778 #define CONFIG_ETHPRIME "FM1@DTSEC4" 779 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 780 #endif 781 782 /* 783 * Dynamic MTD Partition support with mtdparts 784 */ 785 #ifndef CONFIG_SYS_NO_FLASH 786 #define CONFIG_MTD_DEVICE 787 #define CONFIG_MTD_PARTITIONS 788 #define CONFIG_CMD_MTDPARTS 789 #define CONFIG_FLASH_CFI_MTD 790 #define MTDIDS_DEFAULT "nor0=fe8000000.nor,nand0=fff800000.flash," \ 791 "spi0=spife110000.1" 792 #define MTDPARTS_DEFAULT "mtdparts=fe8000000.nor:1m(uboot),5m(kernel)," \ 793 "128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot)," \ 794 "5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:" \ 795 "1m(uboot),5m(kernel),128k(dtb),-(user)" 796 #endif 797 798 /* 799 * Environment 800 */ 801 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 802 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 803 804 /* 805 * Command line configuration. 806 */ 807 #define CONFIG_CMD_DATE 808 #define CONFIG_CMD_EEPROM 809 #define CONFIG_CMD_ERRATA 810 #define CONFIG_CMD_IRQ 811 #define CONFIG_CMD_REGINFO 812 813 #ifdef CONFIG_PCI 814 #define CONFIG_CMD_PCI 815 #endif 816 817 /* 818 * Miscellaneous configurable options 819 */ 820 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 821 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 822 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 823 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 824 #ifdef CONFIG_CMD_KGDB 825 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 826 #else 827 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 828 #endif 829 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 830 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 831 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 832 833 /* 834 * For booting Linux, the board info and command line data 835 * have to be in the first 64 MB of memory, since this is 836 * the maximum mapped by the Linux kernel during initialization. 837 */ 838 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial map for Linux*/ 839 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 840 841 #ifdef CONFIG_CMD_KGDB 842 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 843 #endif 844 845 /* 846 * Environment Configuration 847 */ 848 #define CONFIG_ROOTPATH "/opt/nfsroot" 849 #define CONFIG_BOOTFILE "uImage" 850 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 851 #define CONFIG_LOADADDR 1000000 /* default location for tftp, bootm */ 852 #define CONFIG_BAUDRATE 115200 853 #define __USB_PHY_TYPE utmi 854 855 #ifdef CONFIG_ARCH_T1024 856 #define CONFIG_BOARDNAME t1024rdb 857 #define BANK_INTLV cs0_cs1 858 #else 859 #define CONFIG_BOARDNAME t1023rdb 860 #define BANK_INTLV null 861 #endif 862 863 #define CONFIG_EXTRA_ENV_SETTINGS \ 864 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ 865 "bank_intlv=" __stringify(BANK_INTLV) "\0" \ 866 "usb1:dr_mode=host,phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ 867 "ramdiskfile=" __stringify(CONFIG_BOARDNAME) "/ramdisk.uboot\0" \ 868 "fdtfile=" __stringify(CONFIG_BOARDNAME) "/" \ 869 __stringify(CONFIG_BOARDNAME) ".dtb\0" \ 870 "uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \ 871 "ubootaddr=" __stringify(CONFIG_SYS_TEXT_BASE) "\0" \ 872 "bootargs=root=/dev/ram rw console=ttyS0,115200\0" \ 873 "netdev=eth0\0" \ 874 "tftpflash=tftpboot $loadaddr $uboot && " \ 875 "protect off $ubootaddr +$filesize && " \ 876 "erase $ubootaddr +$filesize && " \ 877 "cp.b $loadaddr $ubootaddr $filesize && " \ 878 "protect on $ubootaddr +$filesize && " \ 879 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 880 "consoledev=ttyS0\0" \ 881 "ramdiskaddr=2000000\0" \ 882 "fdtaddr=1e00000\0" \ 883 "bdev=sda3\0" 884 885 #define CONFIG_LINUX \ 886 "setenv bootargs root=/dev/ram rw " \ 887 "console=$consoledev,$baudrate $othbootargs;" \ 888 "setenv ramdiskaddr 0x02000000;" \ 889 "setenv fdtaddr 0x00c00000;" \ 890 "setenv loadaddr 0x1000000;" \ 891 "bootm $loadaddr $ramdiskaddr $fdtaddr" 892 893 #define CONFIG_NFSBOOTCOMMAND \ 894 "setenv bootargs root=/dev/nfs rw " \ 895 "nfsroot=$serverip:$rootpath " \ 896 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 897 "console=$consoledev,$baudrate $othbootargs;" \ 898 "tftp $loadaddr $bootfile;" \ 899 "tftp $fdtaddr $fdtfile;" \ 900 "bootm $loadaddr - $fdtaddr" 901 902 #define CONFIG_BOOTCOMMAND CONFIG_LINUX 903 904 /* Hash command with SHA acceleration supported in hardware */ 905 #ifdef CONFIG_FSL_CAAM 906 #define CONFIG_CMD_HASH 907 #define CONFIG_SHA_HW_ACCEL 908 #endif 909 910 #include <asm/fsl_secure_boot.h> 911 912 #endif /* __T1024RDB_H */ 913