1 /* 2 * Copyright 2011 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 * P2041 RDB board configuration file 25 * 26 */ 27 #ifndef __CONFIG_H 28 #define __CONFIG_H 29 30 #define CONFIG_P2041RDB 31 #define CONFIG_PHYS_64BIT 32 #define CONFIG_PPC_P2041 33 34 #ifdef CONFIG_RAMBOOT_PBL 35 #define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE 36 #define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc 37 #endif 38 39 /* High Level Configuration Options */ 40 #define CONFIG_BOOKE 41 #define CONFIG_E500 /* BOOKE e500 family */ 42 #define CONFIG_E500MC /* BOOKE e500mc family */ 43 #define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ 44 #define CONFIG_MPC85xx /* MPC85xx/PQ3 platform */ 45 #define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ 46 #define CONFIG_MP /* support multiple processors */ 47 48 #ifndef CONFIG_SYS_TEXT_BASE 49 #define CONFIG_SYS_TEXT_BASE 0xeff80000 50 #endif 51 52 #ifndef CONFIG_RESET_VECTOR_ADDRESS 53 #define CONFIG_RESET_VECTOR_ADDRESS 0xeffffffc 54 #endif 55 56 #define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ 57 #define CONFIG_SYS_NUM_CPC CONFIG_NUM_DDR_CONTROLLERS 58 #define CONFIG_FSL_ELBC /* Has Enhanced localbus controller */ 59 #define CONFIG_PCI /* Enable PCI/PCIE */ 60 #define CONFIG_PCIE1 /* PCIE controler 1 */ 61 #define CONFIG_PCIE2 /* PCIE controler 2 */ 62 #define CONFIG_PCIE3 /* PCIE controler 3 */ 63 #define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ 64 #define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ 65 66 #define CONFIG_SYS_SRIO 67 #define CONFIG_SRIO1 /* SRIO port 1 */ 68 #define CONFIG_SRIO2 /* SRIO port 2 */ 69 70 #define CONFIG_FSL_LAW /* Use common FSL init code */ 71 72 #define CONFIG_ENV_OVERWRITE 73 74 #ifdef CONFIG_SYS_NO_FLASH 75 #define CONFIG_ENV_IS_NOWHERE 76 #else 77 #define CONFIG_FLASH_CFI_DRIVER 78 #define CONFIG_SYS_FLASH_CFI 79 #endif 80 81 #if defined(CONFIG_SPIFLASH) 82 #define CONFIG_SYS_EXTRA_ENV_RELOC 83 #define CONFIG_ENV_IS_IN_SPI_FLASH 84 #define CONFIG_ENV_SPI_BUS 0 85 #define CONFIG_ENV_SPI_CS 0 86 #define CONFIG_ENV_SPI_MAX_HZ 10000000 87 #define CONFIG_ENV_SPI_MODE 0 88 #define CONFIG_ENV_SIZE 0x2000 /* 8KB */ 89 #define CONFIG_ENV_OFFSET 0x100000 /* 1MB */ 90 #define CONFIG_ENV_SECT_SIZE 0x10000 91 #elif defined(CONFIG_SDCARD) 92 #define CONFIG_SYS_EXTRA_ENV_RELOC 93 #define CONFIG_ENV_IS_IN_MMC 94 #define CONFIG_SYS_MMC_ENV_DEV 0 95 #define CONFIG_ENV_SIZE 0x2000 96 #define CONFIG_ENV_OFFSET (512 * 1097) 97 #else 98 #define CONFIG_ENV_IS_IN_FLASH 99 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE \ 100 - CONFIG_ENV_SECT_SIZE) 101 #define CONFIG_ENV_SIZE 0x2000 102 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 103 #endif 104 105 #define CONFIG_SYS_CLK_FREQ 66666666 106 107 /* 108 * These can be toggled for performance analysis, otherwise use default. 109 */ 110 #define CONFIG_SYS_CACHE_STASHING 111 #define CONFIG_BACKSIDE_L2_CACHE 112 #define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E 113 #define CONFIG_BTB /* toggle branch predition */ 114 115 #define CONFIG_ENABLE_36BIT_PHYS 116 117 #ifdef CONFIG_PHYS_64BIT 118 #define CONFIG_ADDR_MAP 119 #define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ 120 #endif 121 122 #define CONFIG_POST CONFIG_SYS_POST_MEMORY /* test POST memory test */ 123 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest works on */ 124 #define CONFIG_SYS_MEMTEST_END 0x00400000 125 #define CONFIG_SYS_ALT_MEMTEST 126 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 127 128 /* 129 * Config the L3 Cache as L3 SRAM 130 */ 131 #define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE 132 #ifdef CONFIG_PHYS_64BIT 133 #define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | \ 134 CONFIG_RAMBOOT_TEXT_BASE) 135 #else 136 #define CONFIG_SYS_INIT_L3_ADDR_PHYS CONFIG_SYS_INIT_L3_ADDR 137 #endif 138 #define CONFIG_SYS_L3_SIZE (1024 << 10) 139 #define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) 140 141 /* 142 * Base addresses -- Note these are effective addresses where the 143 * actual resources get mapped (not physical addresses) 144 */ 145 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xfe000000 /* CCSRBAR Default */ 146 #define CONFIG_SYS_CCSRBAR 0xfe000000 /* relocated CCSRBAR */ 147 #ifdef CONFIG_PHYS_64BIT 148 #define CONFIG_SYS_CCSRBAR_PHYS 0xffe000000ull 149 #else 150 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR 151 #endif 152 /* PQII uses CONFIG_SYS_IMMR */ 153 #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR 154 155 #ifdef CONFIG_PHYS_64BIT 156 #define CONFIG_SYS_DCSRBAR 0xf0000000 157 #define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull 158 #endif 159 160 /* EEPROM */ 161 #define CONFIG_ID_EEPROM 162 #define CONFIG_SYS_I2C_EEPROM_NXID 163 #define CONFIG_SYS_EEPROM_BUS_NUM 0 164 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 165 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 166 167 /* 168 * DDR Setup 169 */ 170 #define CONFIG_VERY_BIG_RAM 171 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 172 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 173 174 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 175 #define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) 176 177 #define CONFIG_DDR_SPD 178 #define CONFIG_FSL_DDR3 179 180 #define CONFIG_SYS_SPD_BUS_NUM 0 181 #define SPD_EEPROM_ADDRESS 0x52 182 #define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ 183 184 /* 185 * Local Bus Definitions 186 */ 187 188 /* Set the local bus clock 1/8 of platform clock */ 189 #define CONFIG_SYS_LBC_LCRR LCRR_CLKDIV_8 190 191 #define CONFIG_SYS_FLASH_BASE 0xe8000000 /* Start of PromJet */ 192 #ifdef CONFIG_PHYS_64BIT 193 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe8000000ull 194 #else 195 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 196 #endif 197 198 #define CONFIG_SYS_BR0_PRELIM \ 199 (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) 200 #define CONFIG_SYS_OR0_PRELIM ((0xf8000ff7 & ~OR_GPCM_SCY & ~OR_GPCM_EHTR) \ 201 | OR_GPCM_SCY_8 | OR_GPCM_EHTR_CLEAR) 202 203 #define CONFIG_FSL_CPLD 204 #define CPLD_BASE 0xffdf0000 /* CPLD registers */ 205 #ifdef CONFIG_PHYS_64BIT 206 #define CPLD_BASE_PHYS 0xfffdf0000ull 207 #else 208 #define CPLD_BASE_PHYS CPLD_BASE 209 #endif 210 211 #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(CPLD_BASE_PHYS) | BR_PS_8 | BR_V) 212 #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ 213 214 #define PIXIS_LBMAP_SWITCH 7 215 #define PIXIS_LBMAP_MASK 0xf0 216 #define PIXIS_LBMAP_SHIFT 4 217 #define PIXIS_LBMAP_ALTBANK 0x40 218 219 #define CONFIG_SYS_FLASH_QUIET_TEST 220 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 221 222 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 223 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 224 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Erase Timeout (ms) */ 225 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Write Timeout (ms) */ 226 227 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 228 229 #if defined(CONFIG_RAMBOOT_PBL) 230 #define CONFIG_SYS_RAMBOOT 231 #endif 232 233 #define CONFIG_SYS_FLASH_EMPTY_INFO 234 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 235 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS} 236 237 #define CONFIG_BOARD_EARLY_INIT_F 238 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 239 #define CONFIG_MISC_INIT_R 240 241 #define CONFIG_HWCONFIG 242 243 /* define to use L1 as initial stack */ 244 #define CONFIG_L1_INIT_RAM 245 #define CONFIG_SYS_INIT_RAM_LOCK 246 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ 247 #ifdef CONFIG_PHYS_64BIT 248 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf 249 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR 250 /* The assembler doesn't like typecast */ 251 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ 252 ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ 253 CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) 254 #else 255 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS CONFIG_SYS_INIT_RAM_ADDR 256 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0 257 #define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR_PHYS 258 #endif 259 #define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 260 261 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ 262 GENERATED_GBL_DATA_SIZE) 263 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 264 265 #define CONFIG_SYS_MONITOR_LEN (512 * 1024) 266 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) 267 268 /* Serial Port - controlled on board with jumper J8 269 * open - index 2 270 * shorted - index 1 271 */ 272 #define CONFIG_CONS_INDEX 1 273 #define CONFIG_SYS_NS16550 274 #define CONFIG_SYS_NS16550_SERIAL 275 #define CONFIG_SYS_NS16550_REG_SIZE 1 276 #define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) 277 278 #define CONFIG_SYS_BAUDRATE_TABLE \ 279 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 280 281 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) 282 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) 283 #define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) 284 #define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) 285 286 /* Use the HUSH parser */ 287 #define CONFIG_SYS_HUSH_PARSER 288 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 289 290 /* pass open firmware flat tree */ 291 #define CONFIG_OF_LIBFDT 292 #define CONFIG_OF_BOARD_SETUP 293 #define CONFIG_OF_STDOUT_VIA_ALIAS 294 295 /* new uImage format support */ 296 #define CONFIG_FIT 297 #define CONFIG_FIT_VERBOSE /* enable fit_format_{error,warning}() */ 298 299 /* I2C */ 300 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 301 #define CONFIG_HARD_I2C /* I2C with hardware support */ 302 #define CONFIG_I2C_MULTI_BUS 303 #define CONFIG_I2C_CMD_TREE 304 #define CONFIG_SYS_I2C_SPEED 400000 305 #define CONFIG_SYS_I2C_SLAVE 0x7F 306 #define CONFIG_SYS_I2C_OFFSET 0x118000 307 #define CONFIG_SYS_I2C2_OFFSET 0x118100 308 309 /* 310 * RapidIO 311 */ 312 #define CONFIG_SYS_SRIO1_MEM_VIRT 0xa0000000 313 #ifdef CONFIG_PHYS_64BIT 314 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xc20000000ull 315 #else 316 #define CONFIG_SYS_SRIO1_MEM_PHYS 0xa0000000 317 #endif 318 #define CONFIG_SYS_SRIO1_MEM_SIZE 0x10000000 /* 256M */ 319 320 #define CONFIG_SYS_SRIO2_MEM_VIRT 0xb0000000 321 #ifdef CONFIG_PHYS_64BIT 322 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xc30000000ull 323 #else 324 #define CONFIG_SYS_SRIO2_MEM_PHYS 0xb0000000 325 #endif 326 #define CONFIG_SYS_SRIO2_MEM_SIZE 0x10000000 /* 256M */ 327 328 /* 329 * eSPI - Enhanced SPI 330 */ 331 #define CONFIG_FSL_ESPI 332 #define CONFIG_SPI_FLASH 333 #define CONFIG_SPI_FLASH_SPANSION 334 #define CONFIG_CMD_SF 335 #define CONFIG_SF_DEFAULT_SPEED 10000000 336 #define CONFIG_SF_DEFAULT_MODE 0 337 338 /* 339 * General PCI 340 * Memory space is mapped 1-1, but I/O space must start from 0. 341 */ 342 343 /* controller 1, direct to uli, tgtid 3, Base address 20000 */ 344 #define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 345 #ifdef CONFIG_PHYS_64BIT 346 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 347 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull 348 #else 349 #define CONFIG_SYS_PCIE1_MEM_BUS 0x80000000 350 #define CONFIG_SYS_PCIE1_MEM_PHYS 0x80000000 351 #endif 352 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 353 #define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 354 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 355 #ifdef CONFIG_PHYS_64BIT 356 #define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull 357 #else 358 #define CONFIG_SYS_PCIE1_IO_PHYS 0xf8000000 359 #endif 360 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 361 362 /* controller 2, Slot 2, tgtid 2, Base address 201000 */ 363 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 364 #ifdef CONFIG_PHYS_64BIT 365 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 366 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 367 #else 368 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 369 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 370 #endif 371 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 372 #define CONFIG_SYS_PCIE2_IO_VIRT 0xf8010000 373 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 374 #ifdef CONFIG_PHYS_64BIT 375 #define CONFIG_SYS_PCIE2_IO_PHYS 0xff8010000ull 376 #else 377 #define CONFIG_SYS_PCIE2_IO_PHYS 0xf8010000 378 #endif 379 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 380 381 /* controller 3, Slot 1, tgtid 1, Base address 202000 */ 382 #define CONFIG_SYS_PCIE3_MEM_VIRT 0xc0000000 383 #ifdef CONFIG_PHYS_64BIT 384 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 385 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc40000000ull 386 #else 387 #define CONFIG_SYS_PCIE3_MEM_BUS 0xc0000000 388 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc0000000 389 #endif 390 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 391 #define CONFIG_SYS_PCIE3_IO_VIRT 0xf8020000 392 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 393 #ifdef CONFIG_PHYS_64BIT 394 #define CONFIG_SYS_PCIE3_IO_PHYS 0xff8020000ull 395 #else 396 #define CONFIG_SYS_PCIE3_IO_PHYS 0xf8020000 397 #endif 398 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 399 400 /* Qman/Bman */ 401 #define CONFIG_SYS_DPAA_QBMAN /* Support Q/Bman */ 402 #define CONFIG_SYS_BMAN_NUM_PORTALS 10 403 #define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 404 #ifdef CONFIG_PHYS_64BIT 405 #define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull 406 #else 407 #define CONFIG_SYS_BMAN_MEM_PHYS CONFIG_SYS_BMAN_MEM_BASE 408 #endif 409 #define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 410 #define CONFIG_SYS_QMAN_NUM_PORTALS 10 411 #define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 412 #ifdef CONFIG_PHYS_64BIT 413 #define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull 414 #else 415 #define CONFIG_SYS_QMAN_MEM_PHYS CONFIG_SYS_QMAN_MEM_BASE 416 #endif 417 #define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 418 419 #define CONFIG_SYS_DPAA_FMAN 420 #define CONFIG_SYS_DPAA_PME 421 /* Default address of microcode for the Linux Fman driver */ 422 #define CONFIG_SYS_FMAN_FW 423 #if defined(CONFIG_SPIFLASH) 424 /* 425 * env is stored at 0x100000, sector size is 0x10000, ucode is stored after 426 * env, so we got 0x110000. 427 */ 428 #define CONFIG_SYS_QE_FW_IN_SPIFLASH 0x110000 429 #elif defined(CONFIG_SDCARD) 430 /* 431 * PBL SD boot image should stored at 0x1000(8 blocks), the size of the image is 432 * about 545KB (1089 blocks), Env is stored after the image, and the env size is 433 * 0x2000 (16 blocks), 8 + 1089 + 16 = 1113, enlarge it to 1130. 434 */ 435 #define CONFIG_SYS_QE_FW_IN_MMC (512 * 1130) 436 #elif defined(CONFIG_NAND) 437 #define CONFIG_SYS_QE_FW_IN_NAND (6 * CONFIG_SYS_NAND_BLOCK_SIZE) 438 #else 439 #define CONFIG_SYS_FMAN_FW_ADDR 0xEF000000 440 #endif 441 #define CONFIG_SYS_FMAN_FW_LENGTH 0x10000 442 #define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_FMAN_FW_LENGTH) 443 444 #ifdef CONFIG_SYS_DPAA_FMAN 445 #define CONFIG_FMAN_ENET 446 #endif 447 448 #ifdef CONFIG_PCI 449 #define CONFIG_NET_MULTI 450 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 451 #define CONFIG_E1000 452 453 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 454 #define CONFIG_DOS_PARTITION 455 #endif /* CONFIG_PCI */ 456 457 #ifdef CONFIG_FMAN_ENET 458 #define CONFIG_SYS_FM1_DTSEC1_PHY_ADDR 0x2 459 #define CONFIG_SYS_FM1_DTSEC2_PHY_ADDR 0x3 460 #define CONFIG_SYS_FM1_DTSEC3_PHY_ADDR 0x4 461 #define CONFIG_SYS_FM1_DTSEC4_PHY_ADDR 0x1 462 #define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x0 463 464 #define CONFIG_SYS_FM1_DTSEC1_RISER_PHY_ADDR 0x1c 465 #define CONFIG_SYS_FM1_DTSEC2_RISER_PHY_ADDR 0x1d 466 #define CONFIG_SYS_FM1_DTSEC3_RISER_PHY_ADDR 0x1e 467 #define CONFIG_SYS_FM1_DTSEC4_RISER_PHY_ADDR 0x1f 468 469 #define CONFIG_SYS_TBIPA_VALUE 8 470 #define CONFIG_MII /* MII PHY management */ 471 #define CONFIG_ETHPRIME "FM1@DTSEC1" 472 #define CONFIG_PHY_GIGE /* Include GbE speed/duplex detection */ 473 #endif 474 475 /* 476 * Environment 477 */ 478 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 479 #define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ 480 481 /* 482 * Command line configuration. 483 */ 484 #include <config_cmd_default.h> 485 486 #define CONFIG_CMD_DHCP 487 #define CONFIG_CMD_ELF 488 #define CONFIG_CMD_ERRATA 489 #define CONFIG_CMD_GREPENV 490 #define CONFIG_CMD_IRQ 491 #define CONFIG_CMD_I2C 492 #define CONFIG_CMD_MII 493 #define CONFIG_CMD_PING 494 #define CONFIG_CMD_SETEXPR 495 496 #ifdef CONFIG_PCI 497 #define CONFIG_CMD_PCI 498 #define CONFIG_CMD_NET 499 #endif 500 501 /* 502 * USB 503 */ 504 #define CONFIG_CMD_USB 505 #define CONFIG_USB_STORAGE 506 #define CONFIG_USB_EHCI 507 #define CONFIG_USB_EHCI_FSL 508 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 509 #define CONFIG_CMD_EXT2 510 511 #define CONFIG_MMC 512 513 #ifdef CONFIG_MMC 514 #define CONFIG_FSL_ESDHC 515 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC85xx_ESDHC_ADDR 516 #define CONFIG_SYS_FSL_ESDHC_BROKEN_TIMEOUT 517 #define CONFIG_CMD_MMC 518 #define CONFIG_GENERIC_MMC 519 #define CONFIG_CMD_EXT2 520 #define CONFIG_CMD_FAT 521 #define CONFIG_DOS_PARTITION 522 #endif 523 524 /* 525 * Miscellaneous configurable options 526 */ 527 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 528 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 529 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 530 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 531 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 532 #ifdef CONFIG_CMD_KGDB 533 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 534 #else 535 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 536 #endif 537 /* Print Buffer Size */ 538 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 539 sizeof(CONFIG_SYS_PROMPT)+16) 540 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 541 /* Boot Argument Buffer Size */ 542 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 543 #define CONFIG_SYS_HZ 1000 /* decrementer freq 1ms ticks */ 544 545 /* 546 * For booting Linux, the board info and command line data 547 * have to be in the first 64 MB of memory, since this is 548 * the maximum mapped by the Linux kernel during initialization. 549 */ 550 #define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux */ 551 #define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ 552 553 #ifdef CONFIG_CMD_KGDB 554 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 555 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 556 #endif 557 558 /* 559 * Environment Configuration 560 */ 561 #define CONFIG_ROOTPATH /opt/nfsroot 562 #define CONFIG_BOOTFILE uImage 563 #define CONFIG_UBOOTPATH u-boot.bin 564 565 /* default location for tftp and bootm */ 566 #define CONFIG_LOADADDR 1000000 567 568 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 569 570 #define CONFIG_BAUDRATE 115200 571 572 #define __USB_PHY_TYPE utmi 573 574 #define CONFIG_EXTRA_ENV_SETTINGS \ 575 "hwconfig=fsl_ddr:ctlr_intlv=cacheline," \ 576 "bank_intlv=cs0_cs1\0" \ 577 "netdev=eth0\0" \ 578 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 579 "ubootaddr=" MK_STR(CONFIG_SYS_TEXT_BASE) "\0" \ 580 "tftpflash=tftpboot $loadaddr $uboot && " \ 581 "protect off $ubootaddr +$filesize && " \ 582 "erase $ubootaddr +$filesize && " \ 583 "cp.b $loadaddr $ubootaddr $filesize && " \ 584 "protect on $ubootaddr +$filesize && " \ 585 "cmp.b $loadaddr $ubootaddr $filesize\0" \ 586 "consoledev=ttyS0\0" \ 587 "usb_phy_type=" MK_STR(__USB_PHY_TYPE) "\0" \ 588 "usb_dr_mode=host\0" \ 589 "ramdiskaddr=2000000\0" \ 590 "ramdiskfile=p2041rdb/ramdisk.uboot\0" \ 591 "fdtaddr=c00000\0" \ 592 "fdtfile=p2041rdb/p2041rdb.dtb\0" \ 593 "bdev=sda3\0" \ 594 "c=ffe\0" 595 596 #define CONFIG_HDBOOT \ 597 "setenv bootargs root=/dev/$bdev rw " \ 598 "console=$consoledev,$baudrate $othbootargs;" \ 599 "tftp $loadaddr $bootfile;" \ 600 "tftp $fdtaddr $fdtfile;" \ 601 "bootm $loadaddr - $fdtaddr" 602 603 #define CONFIG_NFSBOOTCOMMAND \ 604 "setenv bootargs root=/dev/nfs rw " \ 605 "nfsroot=$serverip:$rootpath " \ 606 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 607 "console=$consoledev,$baudrate $othbootargs;" \ 608 "tftp $loadaddr $bootfile;" \ 609 "tftp $fdtaddr $fdtfile;" \ 610 "bootm $loadaddr - $fdtaddr" 611 612 #define CONFIG_RAMBOOTCOMMAND \ 613 "setenv bootargs root=/dev/ram rw " \ 614 "console=$consoledev,$baudrate $othbootargs;" \ 615 "tftp $ramdiskaddr $ramdiskfile;" \ 616 "tftp $loadaddr $bootfile;" \ 617 "tftp $fdtaddr $fdtfile;" \ 618 "bootm $loadaddr $ramdiskaddr $fdtaddr" 619 620 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 621 622 #ifdef CONFIG_SECURE_BOOT 623 #include <asm/fsl_secure_boot.h> 624 #endif 625 626 #endif /* __CONFIG_H */ 627