1 /* 2 * Copyright 2006 Freescale Semiconductor. 3 * 4 * Srikanth Srinivasan (srikanth.srinivasan@freescale.com) 5 * 6 * See file CREDITS for list of people who contributed to this 7 * project. 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License as 11 * published by the Free Software Foundation; either version 2 of 12 * the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 22 * MA 02111-1307 USA 23 */ 24 25 /* 26 * MPC8641HPCN board configuration file 27 * 28 * Make sure you change the MAC address and other network params first, 29 * search for CONFIG_ETHADDR, CONFIG_SERVERIP, etc in this file. 30 */ 31 32 #ifndef __CONFIG_H 33 #define __CONFIG_H 34 35 /* High Level Configuration Options */ 36 #define CONFIG_MPC86xx 1 /* MPC86xx */ 37 #define CONFIG_MPC8641 1 /* MPC8641 specific */ 38 #define CONFIG_MPC8641HPCN 1 /* MPC8641HPCN board specific */ 39 #define CONFIG_NUM_CPUS 2 /* Number of CPUs in the system */ 40 #define CONFIG_LINUX_RESET_VEC 0x100 /* Reset vector used by Linux */ 41 42 #ifdef RUN_DIAG 43 #define CONFIG_SYS_DIAG_ADDR 0xff800000 44 #endif 45 46 #define CONFIG_SYS_RESET_ADDRESS 0xfff00100 47 48 #define CONFIG_PCI 1 /* Enable PCI/PCIE */ 49 #define CONFIG_PCI1 1 /* PCIE controler 1 (ULI bridge) */ 50 #define CONFIG_PCI2 1 /* PCIE controler 2 (slot) */ 51 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ 52 #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ 53 #define CONFIG_FSL_LAW 1 /* Use common FSL law init code */ 54 55 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 56 #define CONFIG_ENV_OVERWRITE 57 58 #define CONFIG_HIGH_BATS 1 /* High BATs supported and enabled */ 59 60 #define CONFIG_ALTIVEC 1 61 62 /* 63 * L2CR setup -- make sure this is right for your board! 64 */ 65 #define CONFIG_SYS_L2 66 #define L2_INIT 0 67 #define L2_ENABLE (L2CR_L2E) 68 69 #ifndef CONFIG_SYS_CLK_FREQ 70 #ifndef __ASSEMBLY__ 71 extern unsigned long get_board_sys_clk(unsigned long dummy); 72 #endif 73 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) 74 #endif 75 76 #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ 77 78 #define CONFIG_SYS_MEMTEST_START 0x00200000 /* memtest region */ 79 #define CONFIG_SYS_MEMTEST_END 0x00400000 80 81 /* 82 * Base addresses -- Note these are effective addresses where the 83 * actual resources get mapped (not physical addresses) 84 */ 85 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ 86 #define CONFIG_SYS_CCSRBAR 0xf8000000 /* relocated CCSRBAR */ 87 #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ 88 89 #define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) 90 #define CONFIG_SYS_PCI2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) 91 92 /* 93 * DDR Setup 94 */ 95 #define CONFIG_FSL_DDR2 96 #undef CONFIG_FSL_DDR_INTERACTIVE 97 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ 98 #define CONFIG_DDR_SPD 99 100 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ 101 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 102 103 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ 104 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 105 #define CONFIG_VERY_BIG_RAM 106 107 #define MPC86xx_DDR_SDRAM_CLK_CNTL 108 109 #define CONFIG_NUM_DDR_CONTROLLERS 2 110 #define CONFIG_DIMM_SLOTS_PER_CTLR 2 111 #define CONFIG_CHIP_SELECTS_PER_CTRL (2 * CONFIG_DIMM_SLOTS_PER_CTLR) 112 113 /* 114 * I2C addresses of SPD EEPROMs 115 */ 116 #define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */ 117 #define SPD_EEPROM_ADDRESS2 0x52 /* CTLR 0 DIMM 1 */ 118 #define SPD_EEPROM_ADDRESS3 0x53 /* CTLR 1 DIMM 0 */ 119 #define SPD_EEPROM_ADDRESS4 0x54 /* CTLR 1 DIMM 1 */ 120 121 122 /* 123 * These are used when DDR doesn't use SPD. 124 */ 125 #define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256MB */ 126 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000000F 127 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80010102 /* Enable, no interleaving */ 128 #define CONFIG_SYS_DDR_TIMING_3 0x00000000 129 #define CONFIG_SYS_DDR_TIMING_0 0x00260802 130 #define CONFIG_SYS_DDR_TIMING_1 0x39357322 131 #define CONFIG_SYS_DDR_TIMING_2 0x14904cc8 132 #define CONFIG_SYS_DDR_MODE_1 0x00480432 133 #define CONFIG_SYS_DDR_MODE_2 0x00000000 134 #define CONFIG_SYS_DDR_INTERVAL 0x06090100 135 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 136 #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000 137 #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 138 #define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 139 #define CONFIG_SYS_DDR_CONTROL 0xe3008000 /* Type = DDR2 */ 140 #define CONFIG_SYS_DDR_CONTROL2 0x04400000 141 142 /* 143 * FIXME: Not used in fixed_sdram function 144 */ 145 #define CONFIG_SYS_DDR_MODE 0x00000022 146 #define CONFIG_SYS_DDR_CS1_BNDS 0x00000000 147 #define CONFIG_SYS_DDR_CS2_BNDS 0x00000FFF /* Not done */ 148 #define CONFIG_SYS_DDR_CS3_BNDS 0x00000FFF /* Not done */ 149 #define CONFIG_SYS_DDR_CS4_BNDS 0x00000FFF /* Not done */ 150 #define CONFIG_SYS_DDR_CS5_BNDS 0x00000FFF /* Not done */ 151 152 153 #define CONFIG_ID_EEPROM 154 #define CONFIG_SYS_I2C_EEPROM_NXID 155 #define CONFIG_ID_EEPROM 156 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 157 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 158 159 /* 160 * In MPC8641HPCN, allocate 16MB flash spaces at fe000000 and ff000000. 161 * There is an 8MB flash. In effect, the addresses from fe000000 to fe7fffff 162 * map to fe800000 to ffffffff, and ff000000 to ff7fffff map to ffffffff. 163 * However, when u-boot comes up, the flash_init needs hard start addresses 164 * to build its info table. For user convenience, the flash addresses is 165 * fe800000 and ff800000. That way, u-boot knows where the flash is 166 * and the user can download u-boot code from promjet to fef00000, a 167 * more intuitive location than fe700000. 168 * 169 * Note that, on switching the boot location, fef00000 becomes fff00000. 170 */ 171 #define CONFIG_SYS_FLASH_BASE 0xfe800000 /* start of FLASH 32M */ 172 #define CONFIG_SYS_FLASH_BASE2 0xff800000 173 174 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2} 175 176 #define CONFIG_SYS_BR0_PRELIM 0xff001001 /* port size 16bit */ 177 #define CONFIG_SYS_OR0_PRELIM 0xff006ff7 /* 16MB Boot Flash area*/ 178 179 #define CONFIG_SYS_BR1_PRELIM 0xfe001001 /* port size 16bit */ 180 #define CONFIG_SYS_OR1_PRELIM 0xff006ff7 /* 16MB Alternate Boot Flash area*/ 181 182 #define CONFIG_SYS_BR2_PRELIM 0xf8201001 /* port size 16bit */ 183 #define CONFIG_SYS_OR2_PRELIM 0xfff06ff7 /* 1MB Compact Flash area*/ 184 185 #define CONFIG_SYS_BR3_PRELIM 0xf8100801 /* port size 8bit */ 186 #define CONFIG_SYS_OR3_PRELIM 0xfff06ff7 /* 1MB PIXIS area*/ 187 188 189 #define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ 190 #define PIXIS_BASE 0xf8100000 /* PIXIS registers */ 191 #define PIXIS_ID 0x0 /* Board ID at offset 0 */ 192 #define PIXIS_VER 0x1 /* Board version at offset 1 */ 193 #define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ 194 #define PIXIS_RST 0x4 /* PIXIS Reset Control register */ 195 #define PIXIS_AUX 0x6 /* PIXIS Auxiliary register; Scratch register */ 196 #define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ 197 #define PIXIS_VCTL 0x10 /* VELA Control Register */ 198 #define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ 199 #define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ 200 #define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ 201 #define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ 202 #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ 203 #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ 204 #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ 205 #define CONFIG_SYS_PIXIS_VBOOT_MASK 0x40 /* Reset altbank mask*/ 206 207 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 208 #define CONFIG_SYS_MAX_FLASH_SECT 128 /* sectors per device */ 209 210 #undef CONFIG_SYS_FLASH_CHECKSUM 211 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 212 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 213 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ 214 215 #define CONFIG_FLASH_CFI_DRIVER 216 #define CONFIG_SYS_FLASH_CFI 217 #define CONFIG_SYS_FLASH_EMPTY_INFO 218 219 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) 220 #define CONFIG_SYS_RAMBOOT 221 #else 222 #undef CONFIG_SYS_RAMBOOT 223 #endif 224 225 #if defined(CONFIG_SYS_RAMBOOT) 226 #undef CONFIG_SPD_EEPROM 227 #define CONFIG_SYS_SDRAM_SIZE 256 228 #endif 229 230 #undef CONFIG_CLOCKS_IN_MHZ 231 232 #define CONFIG_L1_INIT_RAM 233 #define CONFIG_SYS_INIT_RAM_LOCK 1 234 #ifndef CONFIG_SYS_INIT_RAM_LOCK 235 #define CONFIG_SYS_INIT_RAM_ADDR 0x0fd00000 /* Initial RAM address */ 236 #else 237 #define CONFIG_SYS_INIT_RAM_ADDR 0xf8400000 /* Initial RAM address */ 238 #endif 239 #define CONFIG_SYS_INIT_RAM_END 0x4000 /* End of used area in RAM */ 240 241 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ 242 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) 243 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 244 245 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 246 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 247 248 /* Serial Port */ 249 #define CONFIG_CONS_INDEX 1 250 #undef CONFIG_SERIAL_SOFTWARE_FIFO 251 #define CONFIG_SYS_NS16550 252 #define CONFIG_SYS_NS16550_SERIAL 253 #define CONFIG_SYS_NS16550_REG_SIZE 1 254 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 255 256 #define CONFIG_SYS_BAUDRATE_TABLE \ 257 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 258 259 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 260 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 261 262 /* Use the HUSH parser */ 263 #define CONFIG_SYS_HUSH_PARSER 264 #ifdef CONFIG_SYS_HUSH_PARSER 265 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 266 #endif 267 268 /* 269 * Pass open firmware flat tree to kernel 270 */ 271 #define CONFIG_OF_LIBFDT 1 272 #define CONFIG_OF_BOARD_SETUP 1 273 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 274 275 276 #define CONFIG_SYS_64BIT_VSPRINTF 1 277 #define CONFIG_SYS_64BIT_STRTOUL 1 278 279 /* 280 * I2C 281 */ 282 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 283 #define CONFIG_HARD_I2C /* I2C with hardware support*/ 284 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 285 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 286 #define CONFIG_SYS_I2C_SLAVE 0x7F 287 #define CONFIG_SYS_I2C_NOPROBES {0x69} /* Don't probe these addrs */ 288 #define CONFIG_SYS_I2C_OFFSET 0x3100 289 290 /* 291 * RapidIO MMU 292 */ 293 #define CONFIG_SYS_RIO_MEM_BASE 0xc0000000 /* base address */ 294 #define CONFIG_SYS_RIO_MEM_PHYS CONFIG_SYS_RIO_MEM_BASE 295 #define CONFIG_SYS_RIO_MEM_SIZE 0x20000000 /* 128M */ 296 297 /* 298 * General PCI 299 * Addresses are mapped 1-1. 300 */ 301 #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 302 #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE 303 #define CONFIG_SYS_PCI1_MEM_SIZE 0x20000000 /* 512M */ 304 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000 305 #define CONFIG_SYS_PCI1_IO_PHYS 0xe2000000 306 #define CONFIG_SYS_PCI1_IO_SIZE 0x00100000 /* 1M */ 307 308 /* For RTL8139 */ 309 #define KSEG1ADDR(x) ({u32 _x=le32_to_cpu(*(u32 *)(x)); (&_x);}) 310 #define _IO_BASE 0x00000000 311 312 #define CONFIG_SYS_PCI2_MEM_BASE 0xa0000000 313 #define CONFIG_SYS_PCI2_MEM_PHYS CONFIG_SYS_PCI2_MEM_BASE 314 #define CONFIG_SYS_PCI2_MEM_SIZE 0x20000000 /* 512M */ 315 #define CONFIG_SYS_PCI2_IO_BASE 0x00000000 316 #define CONFIG_SYS_PCI2_IO_PHYS 0xe3000000 317 #define CONFIG_SYS_PCI2_IO_SIZE 0x00100000 /* 1M */ 318 319 #if defined(CONFIG_PCI) 320 321 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 322 323 #undef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE 324 325 #define CONFIG_NET_MULTI 326 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 327 328 #define CONFIG_RTL8139 329 330 #undef CONFIG_EEPRO100 331 #undef CONFIG_TULIP 332 333 /************************************************************ 334 * USB support 335 ************************************************************/ 336 #define CONFIG_PCI_OHCI 1 337 #define CONFIG_USB_OHCI_NEW 1 338 #define CONFIG_USB_KEYBOARD 1 339 #define CONFIG_SYS_DEVICE_DEREGISTER 340 #define CONFIG_SYS_USB_EVENT_POLL 1 341 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "ohci_pci" 342 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15 343 #define CONFIG_SYS_OHCI_SWAP_REG_ACCESS 1 344 345 #if !defined(CONFIG_PCI_PNP) 346 #define PCI_ENET0_IOADDR 0xe0000000 347 #define PCI_ENET0_MEMADDR 0xe0000000 348 #define PCI_IDSEL_NUMBER 0x0c /* slot0->3(IDSEL)=12->15 */ 349 #endif 350 351 /*PCIE video card used*/ 352 #define VIDEO_IO_OFFSET CONFIG_SYS_PCI2_IO_PHYS 353 354 /*PCI video card used*/ 355 /*#define VIDEO_IO_OFFSET CONFIG_SYS_PCI1_IO_PHYS*/ 356 357 /* video */ 358 #define CONFIG_VIDEO 359 360 #if defined(CONFIG_VIDEO) 361 #define CONFIG_BIOSEMU 362 #define CONFIG_CFB_CONSOLE 363 #define CONFIG_VIDEO_SW_CURSOR 364 #define CONFIG_VGA_AS_SINGLE_DEVICE 365 #define CONFIG_ATI_RADEON_FB 366 #define CONFIG_VIDEO_LOGO 367 /*#define CONFIG_CONSOLE_CURSOR*/ 368 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCI2_IO_PHYS 369 #endif 370 371 #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 372 373 #define CONFIG_DOS_PARTITION 374 #define CONFIG_SCSI_AHCI 375 376 #ifdef CONFIG_SCSI_AHCI 377 #define CONFIG_SATA_ULI5288 378 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 4 379 #define CONFIG_SYS_SCSI_MAX_LUN 1 380 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN) 381 #define CONFIG_SYS_SCSI_MAXDEVICE CONFIG_SYS_SCSI_MAX_DEVICE 382 #endif 383 384 #define CONFIG_MPC86XX_PCI2 385 386 #endif /* CONFIG_PCI */ 387 388 #if defined(CONFIG_TSEC_ENET) 389 390 #ifndef CONFIG_NET_MULTI 391 #define CONFIG_NET_MULTI 1 392 #endif 393 394 #define CONFIG_MII 1 /* MII PHY management */ 395 396 #define CONFIG_TSEC1 1 397 #define CONFIG_TSEC1_NAME "eTSEC1" 398 #define CONFIG_TSEC2 1 399 #define CONFIG_TSEC2_NAME "eTSEC2" 400 #define CONFIG_TSEC3 1 401 #define CONFIG_TSEC3_NAME "eTSEC3" 402 #define CONFIG_TSEC4 1 403 #define CONFIG_TSEC4_NAME "eTSEC4" 404 405 #define TSEC1_PHY_ADDR 0 406 #define TSEC2_PHY_ADDR 1 407 #define TSEC3_PHY_ADDR 2 408 #define TSEC4_PHY_ADDR 3 409 #define TSEC1_PHYIDX 0 410 #define TSEC2_PHYIDX 0 411 #define TSEC3_PHYIDX 0 412 #define TSEC4_PHYIDX 0 413 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 414 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 415 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 416 #define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 417 418 #define CONFIG_ETHPRIME "eTSEC1" 419 420 #endif /* CONFIG_TSEC_ENET */ 421 422 /* 423 * BAT0 2G Cacheable, non-guarded 424 * 0x0000_0000 2G DDR 425 */ 426 #define CONFIG_SYS_DBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE) 427 #define CONFIG_SYS_DBAT0U (BATU_BL_2G | BATU_VS | BATU_VP) 428 #define CONFIG_SYS_IBAT0L (BATL_PP_RW | BATL_MEMCOHERENCE ) 429 #define CONFIG_SYS_IBAT0U CONFIG_SYS_DBAT0U 430 431 /* 432 * BAT1 1G Cache-inhibited, guarded 433 * 0x8000_0000 512M PCI-Express 1 Memory 434 * 0xa000_0000 512M PCI-Express 2 Memory 435 * Changed it for operating from 0xd0000000 436 */ 437 #define CONFIG_SYS_DBAT1L ( CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW \ 438 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 439 #define CONFIG_SYS_DBAT1U (CONFIG_SYS_PCI1_MEM_PHYS | BATU_BL_1G | BATU_VS | BATU_VP) 440 #define CONFIG_SYS_IBAT1L (CONFIG_SYS_PCI1_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) 441 #define CONFIG_SYS_IBAT1U CONFIG_SYS_DBAT1U 442 443 /* 444 * BAT2 512M Cache-inhibited, guarded 445 * 0xc000_0000 512M RapidIO Memory 446 */ 447 #define CONFIG_SYS_DBAT2L (CONFIG_SYS_RIO_MEM_PHYS | BATL_PP_RW \ 448 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 449 #define CONFIG_SYS_DBAT2U (CONFIG_SYS_RIO_MEM_PHYS | BATU_BL_512M | BATU_VS | BATU_VP) 450 #define CONFIG_SYS_IBAT2L (CONFIG_SYS_RIO_MEM_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) 451 #define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U 452 453 /* 454 * BAT3 4M Cache-inhibited, guarded 455 * 0xf800_0000 4M CCSR 456 */ 457 #define CONFIG_SYS_DBAT3L ( CONFIG_SYS_CCSRBAR | BATL_PP_RW \ 458 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 459 #define CONFIG_SYS_DBAT3U (CONFIG_SYS_CCSRBAR | BATU_BL_4M | BATU_VS | BATU_VP) 460 #define CONFIG_SYS_IBAT3L (CONFIG_SYS_CCSRBAR | BATL_PP_RW | BATL_CACHEINHIBIT) 461 #define CONFIG_SYS_IBAT3U CONFIG_SYS_DBAT3U 462 463 /* 464 * BAT4 32M Cache-inhibited, guarded 465 * 0xe200_0000 16M PCI-Express 1 I/O 466 * 0xe300_0000 16M PCI-Express 2 I/0 467 * Note that this is at 0xe0000000 468 */ 469 #define CONFIG_SYS_DBAT4L ( CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW \ 470 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 471 #define CONFIG_SYS_DBAT4U (CONFIG_SYS_PCI1_IO_PHYS | BATU_BL_32M | BATU_VS | BATU_VP) 472 #define CONFIG_SYS_IBAT4L (CONFIG_SYS_PCI1_IO_PHYS | BATL_PP_RW | BATL_CACHEINHIBIT) 473 #define CONFIG_SYS_IBAT4U CONFIG_SYS_DBAT4U 474 475 /* 476 * BAT5 128K Cacheable, non-guarded 477 * 0xe401_0000 128K Init RAM for stack in the CPU DCache (no backing memory) 478 */ 479 #define CONFIG_SYS_DBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE) 480 #define CONFIG_SYS_DBAT5U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP) 481 #define CONFIG_SYS_IBAT5L CONFIG_SYS_DBAT5L 482 #define CONFIG_SYS_IBAT5U CONFIG_SYS_DBAT5U 483 484 /* 485 * BAT6 32M Cache-inhibited, guarded 486 * 0xfe00_0000 32M FLASH 487 */ 488 #define CONFIG_SYS_DBAT6L ((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATL_PP_RW \ 489 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 490 #define CONFIG_SYS_DBAT6U ((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATU_BL_32M | BATU_VS | BATU_VP) 491 #define CONFIG_SYS_IBAT6L ((CONFIG_SYS_FLASH_BASE & 0xfe000000) | BATL_PP_RW | BATL_MEMCOHERENCE) 492 #define CONFIG_SYS_IBAT6U CONFIG_SYS_DBAT6U 493 494 #define CONFIG_SYS_DBAT7L 0x00000000 495 #define CONFIG_SYS_DBAT7U 0x00000000 496 #define CONFIG_SYS_IBAT7L 0x00000000 497 #define CONFIG_SYS_IBAT7U 0x00000000 498 499 /* 500 * Environment 501 */ 502 #ifndef CONFIG_SYS_RAMBOOT 503 #define CONFIG_ENV_IS_IN_FLASH 1 504 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x60000) 505 #define CONFIG_ENV_SECT_SIZE 0x10000 /* 64K(one sector) for env */ 506 #define CONFIG_ENV_SIZE 0x2000 507 #else 508 #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ 509 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 510 #define CONFIG_ENV_SIZE 0x2000 511 #endif 512 513 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 514 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 515 516 517 /* 518 * BOOTP options 519 */ 520 #define CONFIG_BOOTP_BOOTFILESIZE 521 #define CONFIG_BOOTP_BOOTPATH 522 #define CONFIG_BOOTP_GATEWAY 523 #define CONFIG_BOOTP_HOSTNAME 524 525 526 /* 527 * Command line configuration. 528 */ 529 #include <config_cmd_default.h> 530 531 #define CONFIG_CMD_PING 532 #define CONFIG_CMD_I2C 533 #define CONFIG_CMD_REGINFO 534 535 #if defined(CONFIG_SYS_RAMBOOT) 536 #undef CONFIG_CMD_ENV 537 #endif 538 539 #if defined(CONFIG_PCI) 540 #define CONFIG_CMD_PCI 541 #define CONFIG_CMD_SCSI 542 #define CONFIG_CMD_EXT2 543 #define CONFIG_CMD_USB 544 #endif 545 546 547 #undef CONFIG_WATCHDOG /* watchdog disabled */ 548 549 /* 550 * Miscellaneous configurable options 551 */ 552 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 553 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 554 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 555 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 556 557 #if defined(CONFIG_CMD_KGDB) 558 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 559 #else 560 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 561 #endif 562 563 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 564 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 565 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 566 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 567 568 /* 569 * For booting Linux, the board info and command line data 570 * have to be in the first 8 MB of memory, since this is 571 * the maximum mapped by the Linux kernel during initialization. 572 */ 573 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ 574 575 /* 576 * Internal Definitions 577 * 578 * Boot Flags 579 */ 580 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ 581 #define BOOTFLAG_WARM 0x02 /* Software reboot */ 582 583 #if defined(CONFIG_CMD_KGDB) 584 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 585 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 586 #endif 587 588 /* 589 * Environment Configuration 590 */ 591 592 /* The mac addresses for all ethernet interface */ 593 #if defined(CONFIG_TSEC_ENET) 594 #define CONFIG_ETHADDR 00:E0:0C:00:00:01 595 #define CONFIG_ETH1ADDR 00:E0:0C:00:01:FD 596 #define CONFIG_ETH2ADDR 00:E0:0C:00:02:FD 597 #define CONFIG_ETH3ADDR 00:E0:0C:00:03:FD 598 #endif 599 600 #define CONFIG_HAS_ETH0 1 601 #define CONFIG_HAS_ETH1 1 602 #define CONFIG_HAS_ETH2 1 603 #define CONFIG_HAS_ETH3 1 604 605 #define CONFIG_IPADDR 192.168.1.100 606 607 #define CONFIG_HOSTNAME unknown 608 #define CONFIG_ROOTPATH /opt/nfsroot 609 #define CONFIG_BOOTFILE uImage 610 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 611 612 #define CONFIG_SERVERIP 192.168.1.1 613 #define CONFIG_GATEWAYIP 192.168.1.1 614 #define CONFIG_NETMASK 255.255.255.0 615 616 /* default location for tftp and bootm */ 617 #define CONFIG_LOADADDR 1000000 618 619 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 620 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 621 622 #define CONFIG_BAUDRATE 115200 623 624 #define CONFIG_EXTRA_ENV_SETTINGS \ 625 "netdev=eth0\0" \ 626 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 627 "tftpflash=tftpboot $loadaddr $uboot; " \ 628 "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ 629 "erase " MK_STR(TEXT_BASE) " +$filesize; " \ 630 "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ 631 "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ 632 "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ 633 "consoledev=ttyS0\0" \ 634 "ramdiskaddr=2000000\0" \ 635 "ramdiskfile=your.ramdisk.u-boot\0" \ 636 "fdtaddr=c00000\0" \ 637 "fdtfile=mpc8641_hpcn.dtb\0" \ 638 "en-wd=mw.b f8100010 0x08; echo -expect:- 08; md.b f8100010 1\0" \ 639 "dis-wd=mw.b f8100010 0x00; echo -expect:- 00; md.b f8100010 1\0" \ 640 "maxcpus=2" 641 642 643 #define CONFIG_NFSBOOTCOMMAND \ 644 "setenv bootargs root=/dev/nfs rw " \ 645 "nfsroot=$serverip:$rootpath " \ 646 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 647 "console=$consoledev,$baudrate $othbootargs;" \ 648 "tftp $loadaddr $bootfile;" \ 649 "tftp $fdtaddr $fdtfile;" \ 650 "bootm $loadaddr - $fdtaddr" 651 652 #define CONFIG_RAMBOOTCOMMAND \ 653 "setenv bootargs root=/dev/ram rw " \ 654 "console=$consoledev,$baudrate $othbootargs;" \ 655 "tftp $ramdiskaddr $ramdiskfile;" \ 656 "tftp $loadaddr $bootfile;" \ 657 "tftp $fdtaddr $fdtfile;" \ 658 "bootm $loadaddr $ramdiskaddr $fdtaddr" 659 660 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND 661 662 #endif /* __CONFIG_H */ 663