1 /* 2 * Copyright 2007-2008 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 * mpc8572ds board configuration file 25 * 26 */ 27 #ifndef __CONFIG_H 28 #define __CONFIG_H 29 30 /* High Level Configuration Options */ 31 #define CONFIG_BOOKE 1 /* BOOKE */ 32 #define CONFIG_E500 1 /* BOOKE e500 family */ 33 #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ 34 #define CONFIG_MPC8572 1 35 #define CONFIG_MPC8572DS 1 36 #define CONFIG_MP 1 /* support multiple processors */ 37 #define CONFIG_NUM_CPUS 2 /* Number of CPUs in the system */ 38 39 #define CONFIG_PCI 1 /* Enable PCI/PCIE */ 40 #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ 41 #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ 42 #define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ 43 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ 44 #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ 45 #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ 46 47 #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ 48 49 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 50 #define CONFIG_ENV_OVERWRITE 51 52 /* 53 * When initializing flash, if we cannot find the manufacturer ID, 54 * assume this is the AMD flash associated with the CDS board. 55 * This allows booting from a promjet. 56 */ 57 #define CONFIG_ASSUME_AMD_FLASH 58 59 #ifndef __ASSEMBLY__ 60 extern unsigned long get_board_sys_clk(unsigned long dummy); 61 extern unsigned long get_board_ddr_clk(unsigned long dummy); 62 #endif 63 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC85xx */ 64 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk(0) /* ddrclk for MPC85xx */ 65 #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ 66 #define CONFIG_GET_CLK_FROM_ICS307 /* decode sysclk and ddrclk freq 67 from ICS307 instead of switches */ 68 69 /* 70 * These can be toggled for performance analysis, otherwise use default. 71 */ 72 #define CONFIG_L2_CACHE /* toggle L2 cache */ 73 #define CONFIG_BTB /* toggle branch predition */ 74 #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ 75 76 #define CONFIG_ENABLE_36BIT_PHYS 1 77 78 #define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ 79 #define CONFIG_SYS_MEMTEST_END 0x7fffffff 80 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 81 82 /* 83 * Base addresses -- Note these are effective addresses where the 84 * actual resources get mapped (not physical addresses) 85 */ 86 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ 87 #define CONFIG_SYS_CCSRBAR 0xffe00000 /* relocated CCSRBAR */ 88 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ 89 #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ 90 91 #define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR+0x8000) 92 #define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) 93 #define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) 94 95 /* DDR Setup */ 96 #define CONFIG_FSL_DDR2 97 #undef CONFIG_FSL_DDR_INTERACTIVE 98 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ 99 #define CONFIG_DDR_SPD 100 #undef CONFIG_DDR_DLL 101 102 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 103 104 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 105 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 106 107 #define CONFIG_NUM_DDR_CONTROLLERS 2 108 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 109 #define CONFIG_CHIP_SELECTS_PER_CTRL 2 110 111 /* I2C addresses of SPD EEPROMs */ 112 #define CONFIG_SYS_SPD_BUS_NUM 1 /* SPD EEPROMS locate on I2C bus 1 */ 113 #define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */ 114 #define SPD_EEPROM_ADDRESS2 0x52 /* CTLR 1 DIMM 0 */ 115 116 /* These are used when DDR doesn't use SPD. */ 117 #define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256MB */ 118 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001F 119 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80010102 /* Enable, no interleaving */ 120 #define CONFIG_SYS_DDR_TIMING_3 0x00000000 121 #define CONFIG_SYS_DDR_TIMING_0 0x00260802 122 #define CONFIG_SYS_DDR_TIMING_1 0x3935d322 123 #define CONFIG_SYS_DDR_TIMING_2 0x14904cc8 124 #define CONFIG_SYS_DDR_MODE_1 0x00480432 125 #define CONFIG_SYS_DDR_MODE_2 0x00000000 126 #define CONFIG_SYS_DDR_INTERVAL 0x06180100 127 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 128 #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000 129 #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 130 #define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 131 #define CONFIG_SYS_DDR_CONTROL 0xC3008000 /* Type = DDR2 */ 132 #define CONFIG_SYS_DDR_CONTROL2 0x04400010 133 134 #define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d 135 #define CONFIG_SYS_DDR_ERR_DIS 0x00000000 136 #define CONFIG_SYS_DDR_SBE 0x00010000 137 138 /* 139 * Make sure required options are set 140 */ 141 #ifndef CONFIG_SPD_EEPROM 142 #error ("CONFIG_SPD_EEPROM is required") 143 #endif 144 145 #undef CONFIG_CLOCKS_IN_MHZ 146 147 /* 148 * Memory map 149 * 150 * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable 151 * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable 152 * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable 153 * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable 154 * 155 * Localbus cacheable (TBD) 156 * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable 157 * 158 * Localbus non-cacheable 159 * 0xe000_0000 0xe80f_ffff Promjet/free 128M non-cacheable 160 * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable 161 * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0 162 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 163 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 164 */ 165 166 /* 167 * Local Bus Definitions 168 */ 169 #define CONFIG_SYS_FLASH_BASE 0xe0000000 /* start of FLASH 128M */ 170 171 #define CONFIG_SYS_BR0_PRELIM 0xe8001001 172 #define CONFIG_SYS_OR0_PRELIM 0xf8000ff7 173 174 #define CONFIG_SYS_BR1_PRELIM 0xe0001001 175 #define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 176 177 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE + 0x8000000, CONFIG_SYS_FLASH_BASE} 178 #define CONFIG_SYS_FLASH_QUIET_TEST 179 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 180 181 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 182 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 183 #undef CONFIG_SYS_FLASH_CHECKSUM 184 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 185 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 186 187 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ 188 189 #define CONFIG_FLASH_CFI_DRIVER 190 #define CONFIG_SYS_FLASH_CFI 191 #define CONFIG_SYS_FLASH_EMPTY_INFO 192 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 193 194 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 195 196 #define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ 197 #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ 198 199 #define CONFIG_SYS_BR3_PRELIM (PIXIS_BASE | 0x0801) /* port size 8bit */ 200 #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ 201 202 #define PIXIS_ID 0x0 /* Board ID at offset 0 */ 203 #define PIXIS_VER 0x1 /* Board version at offset 1 */ 204 #define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ 205 #define PIXIS_CSR 0x3 /* PIXIS General control/status register */ 206 #define PIXIS_RST 0x4 /* PIXIS Reset Control register */ 207 #define PIXIS_PWR 0x5 /* PIXIS Power status register */ 208 #define PIXIS_AUX 0x6 /* Auxiliary 1 register */ 209 #define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ 210 #define PIXIS_AUX2 0x8 /* Auxiliary 2 register */ 211 #define PIXIS_VCTL 0x10 /* VELA Control Register */ 212 #define PIXIS_VSTAT 0x11 /* VELA Status Register */ 213 #define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ 214 #define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ 215 #define PIXIS_VCORE0 0x14 /* VELA VCORE0 Register */ 216 #define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ 217 #define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ 218 #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ 219 #define PIXIS_VSPEED2 0x19 /* VELA VSpeed 2 */ 220 #define PIXIS_VSYSCLK0 0x1C /* VELA SYSCLK0 Register */ 221 #define PIXIS_VSYSCLK1 0x1D /* VELA SYSCLK1 Register */ 222 #define PIXIS_VSYSCLK2 0x1E /* VELA SYSCLK2 Register */ 223 #define PIXIS_VDDRCLK0 0x1F /* VELA DDRCLK0 Register */ 224 #define PIXIS_VDDRCLK1 0x20 /* VELA DDRCLK1 Register */ 225 #define PIXIS_VDDRCLK2 0x21 /* VELA DDRCLK2 Register */ 226 #define PIXIS_VWATCH 0x24 /* Watchdog Register */ 227 #define PIXIS_LED 0x25 /* LED Register */ 228 229 /* old pixis referenced names */ 230 #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ 231 #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ 232 #define CONFIG_SYS_PIXIS_VBOOT_MASK 0xc0 233 #define PIXIS_VSPEED2_TSEC1SER 0x8 234 #define PIXIS_VSPEED2_TSEC2SER 0x4 235 #define PIXIS_VSPEED2_TSEC3SER 0x2 236 #define PIXIS_VSPEED2_TSEC4SER 0x1 237 #define PIXIS_VCFGEN1_TSEC1SER 0x20 238 #define PIXIS_VCFGEN1_TSEC2SER 0x20 239 #define PIXIS_VCFGEN1_TSEC3SER 0x20 240 #define PIXIS_VCFGEN1_TSEC4SER 0x20 241 #define PIXIS_VSPEED2_MASK (PIXIS_VSPEED2_TSEC1SER \ 242 | PIXIS_VSPEED2_TSEC2SER \ 243 | PIXIS_VSPEED2_TSEC3SER \ 244 | PIXIS_VSPEED2_TSEC4SER) 245 #define PIXIS_VCFGEN1_MASK (PIXIS_VCFGEN1_TSEC1SER \ 246 | PIXIS_VCFGEN1_TSEC2SER \ 247 | PIXIS_VCFGEN1_TSEC3SER \ 248 | PIXIS_VCFGEN1_TSEC4SER) 249 250 /* define to use L1 as initial stack */ 251 #define CONFIG_L1_INIT_RAM 252 #define CONFIG_SYS_INIT_RAM_LOCK 1 253 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ 254 #define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ 255 256 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ 257 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) 258 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 259 260 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 261 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 262 263 /* Serial Port - controlled on board with jumper J8 264 * open - index 2 265 * shorted - index 1 266 */ 267 #define CONFIG_CONS_INDEX 1 268 #undef CONFIG_SERIAL_SOFTWARE_FIFO 269 #define CONFIG_SYS_NS16550 270 #define CONFIG_SYS_NS16550_SERIAL 271 #define CONFIG_SYS_NS16550_REG_SIZE 1 272 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 273 274 #define CONFIG_SYS_BAUDRATE_TABLE \ 275 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 276 277 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 278 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 279 280 /* Use the HUSH parser */ 281 #define CONFIG_SYS_HUSH_PARSER 282 #ifdef CONFIG_SYS_HUSH_PARSER 283 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 284 #endif 285 286 /* 287 * Pass open firmware flat tree 288 */ 289 #define CONFIG_OF_LIBFDT 1 290 #define CONFIG_OF_BOARD_SETUP 1 291 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 292 293 #define CONFIG_SYS_64BIT_VSPRINTF 1 294 #define CONFIG_SYS_64BIT_STRTOUL 1 295 296 /* new uImage format support */ 297 #define CONFIG_FIT 1 298 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ 299 300 /* I2C */ 301 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 302 #define CONFIG_HARD_I2C /* I2C with hardware support */ 303 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 304 #define CONFIG_I2C_MULTI_BUS 305 #define CONFIG_I2C_CMD_TREE 306 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 307 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 308 #define CONFIG_SYS_I2C_SLAVE 0x7F 309 #define CONFIG_SYS_I2C_NOPROBES {{0,0x29}}/* Don't probe these addrs */ 310 #define CONFIG_SYS_I2C_OFFSET 0x3000 311 #define CONFIG_SYS_I2C2_OFFSET 0x3100 312 313 /* 314 * I2C2 EEPROM 315 */ 316 #define CONFIG_ID_EEPROM 317 #ifdef CONFIG_ID_EEPROM 318 #define CONFIG_SYS_I2C_EEPROM_NXID 319 #endif 320 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 321 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 322 #define CONFIG_SYS_EEPROM_BUS_NUM 1 323 324 /* 325 * General PCI 326 * Memory space is mapped 1-1, but I/O space must start from 0. 327 */ 328 329 /* controller 3, direct to uli, tgtid 3, Base address 8000 */ 330 #define CONFIG_SYS_PCIE3_MEM_BASE 0x80000000 331 #define CONFIG_SYS_PCIE3_MEM_PHYS CONFIG_SYS_PCIE3_MEM_BASE 332 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 333 #define CONFIG_SYS_PCIE3_IO_BASE 0x00000000 334 #define CONFIG_SYS_PCIE3_IO_PHYS 0xffc00000 335 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 336 337 /* controller 2, Slot 2, tgtid 2, Base address 9000 */ 338 #define CONFIG_SYS_PCIE2_MEM_BASE 0xa0000000 339 #define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BASE 340 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 341 #define CONFIG_SYS_PCIE2_IO_BASE 0x00000000 342 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 343 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 344 345 /* controller 1, Slot 1, tgtid 1, Base address a000 */ 346 #define CONFIG_SYS_PCIE1_MEM_BASE 0xc0000000 347 #define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BASE 348 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 349 #define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 350 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 351 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 352 353 #if defined(CONFIG_PCI) 354 355 /*PCIE video card used*/ 356 #define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_PHYS 357 358 /* video */ 359 #define CONFIG_VIDEO 360 361 #if defined(CONFIG_VIDEO) 362 #define CONFIG_BIOSEMU 363 #define CONFIG_CFB_CONSOLE 364 #define CONFIG_VIDEO_SW_CURSOR 365 #define CONFIG_VGA_AS_SINGLE_DEVICE 366 #define CONFIG_ATI_RADEON_FB 367 #define CONFIG_VIDEO_LOGO 368 /*#define CONFIG_CONSOLE_CURSOR*/ 369 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET 370 #endif 371 372 #define CONFIG_NET_MULTI 373 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 374 375 #undef CONFIG_EEPRO100 376 #undef CONFIG_TULIP 377 #undef CONFIG_RTL8139 378 379 #ifdef CONFIG_RTL8139 380 /* This macro is used by RTL8139 but not defined in PPC architecture */ 381 #define KSEG1ADDR(x) (x) 382 #define _IO_BASE 0x00000000 383 #endif 384 385 #ifndef CONFIG_PCI_PNP 386 #define PCI_ENET0_IOADDR CONFIG_SYS_PCIE3_IO_BASE 387 #define PCI_ENET0_MEMADDR CONFIG_SYS_PCIE3_IO_BASE 388 #define PCI_IDSEL_NUMBER 0x11 /* IDSEL = AD11 */ 389 #endif 390 391 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 392 #define CONFIG_DOS_PARTITION 393 #define CONFIG_SCSI_AHCI 394 395 #ifdef CONFIG_SCSI_AHCI 396 #define CONFIG_SATA_ULI5288 397 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 4 398 #define CONFIG_SYS_SCSI_MAX_LUN 1 399 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN) 400 #define CONFIG_SYS_SCSI_MAXDEVICE CONFIG_SYS_SCSI_MAX_DEVICE 401 #endif /* SCSI */ 402 403 #endif /* CONFIG_PCI */ 404 405 406 #if defined(CONFIG_TSEC_ENET) 407 408 #ifndef CONFIG_NET_MULTI 409 #define CONFIG_NET_MULTI 1 410 #endif 411 412 #define CONFIG_MII 1 /* MII PHY management */ 413 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 414 #define CONFIG_TSEC1 1 415 #define CONFIG_TSEC1_NAME "eTSEC1" 416 #define CONFIG_TSEC2 1 417 #define CONFIG_TSEC2_NAME "eTSEC2" 418 #define CONFIG_TSEC3 1 419 #define CONFIG_TSEC3_NAME "eTSEC3" 420 #define CONFIG_TSEC4 1 421 #define CONFIG_TSEC4_NAME "eTSEC4" 422 423 #define CONFIG_PIXIS_SGMII_CMD 424 #define CONFIG_FSL_SGMII_RISER 1 425 #define SGMII_RISER_PHY_OFFSET 0x1c 426 427 #ifdef CONFIG_FSL_SGMII_RISER 428 #define CONFIG_SYS_TBIPA_VALUE 0x10 /* avoid conflict with eTSEC4 paddr */ 429 #endif 430 431 #define TSEC1_PHY_ADDR 0 432 #define TSEC2_PHY_ADDR 1 433 #define TSEC3_PHY_ADDR 2 434 #define TSEC4_PHY_ADDR 3 435 436 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 437 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 438 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 439 #define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 440 441 #define TSEC1_PHYIDX 0 442 #define TSEC2_PHYIDX 0 443 #define TSEC3_PHYIDX 0 444 #define TSEC4_PHYIDX 0 445 446 #define CONFIG_ETHPRIME "eTSEC1" 447 448 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 449 #endif /* CONFIG_TSEC_ENET */ 450 451 /* 452 * Environment 453 */ 454 #define CONFIG_ENV_IS_IN_FLASH 1 455 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 456 #define CONFIG_ENV_ADDR 0xfff80000 457 #else 458 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x70000) 459 #endif 460 #define CONFIG_ENV_SIZE 0x2000 461 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 462 463 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 464 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 465 466 /* 467 * Command line configuration. 468 */ 469 #include <config_cmd_default.h> 470 471 #define CONFIG_CMD_IRQ 472 #define CONFIG_CMD_PING 473 #define CONFIG_CMD_I2C 474 #define CONFIG_CMD_MII 475 #define CONFIG_CMD_ELF 476 #define CONFIG_CMD_IRQ 477 #define CONFIG_CMD_SETEXPR 478 479 #if defined(CONFIG_PCI) 480 #define CONFIG_CMD_PCI 481 #define CONFIG_CMD_BEDBUG 482 #define CONFIG_CMD_NET 483 #define CONFIG_CMD_SCSI 484 #define CONFIG_CMD_EXT2 485 #endif 486 487 #undef CONFIG_WATCHDOG /* watchdog disabled */ 488 489 /* 490 * Miscellaneous configurable options 491 */ 492 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 493 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 494 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 495 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 496 #if defined(CONFIG_CMD_KGDB) 497 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 498 #else 499 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 500 #endif 501 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 502 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 503 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 504 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 505 506 /* 507 * For booting Linux, the board info and command line data 508 * have to be in the first 8 MB of memory, since this is 509 * the maximum mapped by the Linux kernel during initialization. 510 */ 511 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ 512 513 /* 514 * Internal Definitions 515 * 516 * Boot Flags 517 */ 518 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ 519 #define BOOTFLAG_WARM 0x02 /* Software reboot */ 520 521 #if defined(CONFIG_CMD_KGDB) 522 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 523 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 524 #endif 525 526 /* 527 * Environment Configuration 528 */ 529 530 /* The mac addresses for all ethernet interface */ 531 #if defined(CONFIG_TSEC_ENET) 532 #define CONFIG_HAS_ETH0 533 #define CONFIG_ETHADDR 00:E0:0C:02:00:FD 534 #define CONFIG_HAS_ETH1 535 #define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD 536 #define CONFIG_HAS_ETH2 537 #define CONFIG_ETH2ADDR 00:E0:0C:02:02:FD 538 #define CONFIG_HAS_ETH3 539 #define CONFIG_ETH3ADDR 00:E0:0C:02:03:FD 540 #endif 541 542 #define CONFIG_IPADDR 192.168.1.254 543 544 #define CONFIG_HOSTNAME unknown 545 #define CONFIG_ROOTPATH /opt/nfsroot 546 #define CONFIG_BOOTFILE uImage 547 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 548 549 #define CONFIG_SERVERIP 192.168.1.1 550 #define CONFIG_GATEWAYIP 192.168.1.1 551 #define CONFIG_NETMASK 255.255.255.0 552 553 /* default location for tftp and bootm */ 554 #define CONFIG_LOADADDR 1000000 555 556 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 557 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 558 559 #define CONFIG_BAUDRATE 115200 560 561 #define CONFIG_EXTRA_ENV_SETTINGS \ 562 "memctl_intlv_ctl=2\0" \ 563 "netdev=eth0\0" \ 564 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 565 "tftpflash=tftpboot $loadaddr $uboot; " \ 566 "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ 567 "erase " MK_STR(TEXT_BASE) " +$filesize; " \ 568 "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ 569 "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ 570 "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ 571 "consoledev=ttyS0\0" \ 572 "ramdiskaddr=2000000\0" \ 573 "ramdiskfile=8572ds/ramdisk.uboot\0" \ 574 "fdtaddr=c00000\0" \ 575 "fdtfile=8572ds/mpc8572ds.dtb\0" \ 576 "bdev=sda3\0" 577 578 #define CONFIG_HDBOOT \ 579 "setenv bootargs root=/dev/$bdev rw " \ 580 "console=$consoledev,$baudrate $othbootargs;" \ 581 "tftp $loadaddr $bootfile;" \ 582 "tftp $fdtaddr $fdtfile;" \ 583 "bootm $loadaddr - $fdtaddr" 584 585 #define CONFIG_NFSBOOTCOMMAND \ 586 "setenv bootargs root=/dev/nfs rw " \ 587 "nfsroot=$serverip:$rootpath " \ 588 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 589 "console=$consoledev,$baudrate $othbootargs;" \ 590 "tftp $loadaddr $bootfile;" \ 591 "tftp $fdtaddr $fdtfile;" \ 592 "bootm $loadaddr - $fdtaddr" 593 594 #define CONFIG_RAMBOOTCOMMAND \ 595 "setenv bootargs root=/dev/ram rw " \ 596 "console=$consoledev,$baudrate $othbootargs;" \ 597 "tftp $ramdiskaddr $ramdiskfile;" \ 598 "tftp $loadaddr $bootfile;" \ 599 "tftp $fdtaddr $fdtfile;" \ 600 "bootm $loadaddr $ramdiskaddr $fdtaddr" 601 602 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 603 604 #endif /* __CONFIG_H */ 605