1 /* 2 * Copyright 2007-2008 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 * mpc8572ds board configuration file 25 * 26 */ 27 #ifndef __CONFIG_H 28 #define __CONFIG_H 29 30 #ifdef CONFIG_MK_36BIT 31 #define CONFIG_PHYS_64BIT 32 #endif 33 34 /* High Level Configuration Options */ 35 #define CONFIG_BOOKE 1 /* BOOKE */ 36 #define CONFIG_E500 1 /* BOOKE e500 family */ 37 #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ 38 #define CONFIG_MPC8572 1 39 #define CONFIG_MPC8572DS 1 40 #define CONFIG_MP 1 /* support multiple processors */ 41 42 #define CONFIG_FSL_ELBC 1 /* Has Enhanced localbus controller */ 43 #define CONFIG_PCI 1 /* Enable PCI/PCIE */ 44 #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ 45 #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ 46 #define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ 47 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ 48 #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ 49 #define CONFIG_SYS_PCI_64BIT 1 /* enable 64-bit PCI resources */ 50 51 #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ 52 53 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 54 #define CONFIG_ENV_OVERWRITE 55 56 #ifndef __ASSEMBLY__ 57 extern unsigned long get_board_sys_clk(unsigned long dummy); 58 extern unsigned long get_board_ddr_clk(unsigned long dummy); 59 #endif 60 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC85xx */ 61 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk(0) /* ddrclk for MPC85xx */ 62 #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ 63 #define CONFIG_GET_CLK_FROM_ICS307 /* decode sysclk and ddrclk freq 64 from ICS307 instead of switches */ 65 66 /* 67 * These can be toggled for performance analysis, otherwise use default. 68 */ 69 #define CONFIG_L2_CACHE /* toggle L2 cache */ 70 #define CONFIG_BTB /* toggle branch predition */ 71 72 #define CONFIG_ENABLE_36BIT_PHYS 1 73 74 #ifdef CONFIG_PHYS_64BIT 75 #define CONFIG_ADDR_MAP 1 76 #define CONFIG_SYS_NUM_ADDR_MAP 16 /* number of TLB1 entries */ 77 #endif 78 79 #define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ 80 #define CONFIG_SYS_MEMTEST_END 0x7fffffff 81 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 82 83 /* 84 * Base addresses -- Note these are effective addresses where the 85 * actual resources get mapped (not physical addresses) 86 */ 87 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ 88 #define CONFIG_SYS_CCSRBAR 0xffe00000 /* relocated CCSRBAR */ 89 #ifdef CONFIG_PHYS_64BIT 90 #define CONFIG_SYS_CCSRBAR_PHYS 0xfffe00000ull /* physical addr of CCSRBAR */ 91 #else 92 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ 93 #endif 94 #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ 95 96 #define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR+0x8000) 97 #define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) 98 #define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) 99 100 /* DDR Setup */ 101 #define CONFIG_SYS_DDR_TLB_START 9 102 #define CONFIG_VERY_BIG_RAM 103 #define CONFIG_FSL_DDR2 104 #undef CONFIG_FSL_DDR_INTERACTIVE 105 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ 106 #define CONFIG_DDR_SPD 107 #undef CONFIG_DDR_DLL 108 109 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER 110 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 111 112 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 113 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 114 115 #define CONFIG_NUM_DDR_CONTROLLERS 2 116 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 117 #define CONFIG_CHIP_SELECTS_PER_CTRL 2 118 119 /* I2C addresses of SPD EEPROMs */ 120 #define CONFIG_SYS_SPD_BUS_NUM 1 /* SPD EEPROMS locate on I2C bus 1 */ 121 #define SPD_EEPROM_ADDRESS1 0x51 /* CTLR 0 DIMM 0 */ 122 #define SPD_EEPROM_ADDRESS2 0x52 /* CTLR 1 DIMM 0 */ 123 124 /* These are used when DDR doesn't use SPD. */ 125 #define CONFIG_SYS_SDRAM_SIZE 512 /* DDR is 512MB */ 126 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001F 127 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80010202 /* Enable, no interleaving */ 128 #define CONFIG_SYS_DDR_TIMING_3 0x00020000 129 #define CONFIG_SYS_DDR_TIMING_0 0x00260802 130 #define CONFIG_SYS_DDR_TIMING_1 0x626b2634 131 #define CONFIG_SYS_DDR_TIMING_2 0x062874cf 132 #define CONFIG_SYS_DDR_MODE_1 0x00440462 133 #define CONFIG_SYS_DDR_MODE_2 0x00000000 134 #define CONFIG_SYS_DDR_INTERVAL 0x0c300100 135 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 136 #define CONFIG_SYS_DDR_CLK_CTRL 0x00800000 137 #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 138 #define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 139 #define CONFIG_SYS_DDR_CONTROL 0xc3000008 /* Type = DDR2 */ 140 #define CONFIG_SYS_DDR_CONTROL2 0x24400000 141 142 #define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d 143 #define CONFIG_SYS_DDR_ERR_DIS 0x00000000 144 #define CONFIG_SYS_DDR_SBE 0x00010000 145 146 /* 147 * Make sure required options are set 148 */ 149 #ifndef CONFIG_SPD_EEPROM 150 #error ("CONFIG_SPD_EEPROM is required") 151 #endif 152 153 #undef CONFIG_CLOCKS_IN_MHZ 154 155 /* 156 * Memory map 157 * 158 * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable 159 * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable 160 * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable 161 * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable 162 * 163 * Localbus cacheable (TBD) 164 * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable 165 * 166 * Localbus non-cacheable 167 * 0xe000_0000 0xe80f_ffff Promjet/free 128M non-cacheable 168 * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable 169 * 0xffa0_0000 0xffaf_ffff NAND 1M non-cacheable 170 * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0 171 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 172 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 173 */ 174 175 /* 176 * Local Bus Definitions 177 */ 178 #define CONFIG_SYS_FLASH_BASE 0xe0000000 /* start of FLASH 128M */ 179 #ifdef CONFIG_PHYS_64BIT 180 #define CONFIG_SYS_FLASH_BASE_PHYS 0xfe0000000ull 181 #else 182 #define CONFIG_SYS_FLASH_BASE_PHYS CONFIG_SYS_FLASH_BASE 183 #endif 184 185 #define CONFIG_SYS_BR0_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000)) | BR_PS_16 | BR_V) 186 #define CONFIG_SYS_OR0_PRELIM 0xf8000ff7 187 188 #define CONFIG_SYS_BR1_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_FLASH_BASE_PHYS) | BR_PS_16 | BR_V) 189 #define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 190 191 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE_PHYS + 0x8000000, CONFIG_SYS_FLASH_BASE_PHYS} 192 #define CONFIG_SYS_FLASH_QUIET_TEST 193 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 194 195 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 196 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 197 #undef CONFIG_SYS_FLASH_CHECKSUM 198 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 199 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 200 201 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ 202 203 #define CONFIG_FLASH_CFI_DRIVER 204 #define CONFIG_SYS_FLASH_CFI 205 #define CONFIG_SYS_FLASH_EMPTY_INFO 206 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 207 208 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 209 210 #define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ 211 #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ 212 #ifdef CONFIG_PHYS_64BIT 213 #define PIXIS_BASE_PHYS 0xfffdf0000ull 214 #else 215 #define PIXIS_BASE_PHYS PIXIS_BASE 216 #endif 217 218 #define CONFIG_SYS_BR3_PRELIM (BR_PHYS_ADDR(PIXIS_BASE_PHYS) | BR_PS_8 | BR_V) 219 #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ 220 221 #define PIXIS_ID 0x0 /* Board ID at offset 0 */ 222 #define PIXIS_VER 0x1 /* Board version at offset 1 */ 223 #define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ 224 #define PIXIS_CSR 0x3 /* PIXIS General control/status register */ 225 #define PIXIS_RST 0x4 /* PIXIS Reset Control register */ 226 #define PIXIS_PWR 0x5 /* PIXIS Power status register */ 227 #define PIXIS_AUX 0x6 /* Auxiliary 1 register */ 228 #define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ 229 #define PIXIS_AUX2 0x8 /* Auxiliary 2 register */ 230 #define PIXIS_VCTL 0x10 /* VELA Control Register */ 231 #define PIXIS_VSTAT 0x11 /* VELA Status Register */ 232 #define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ 233 #define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ 234 #define PIXIS_VCORE0 0x14 /* VELA VCORE0 Register */ 235 #define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ 236 #define PIXIS_VBOOT_LBMAP 0xc0 /* VBOOT - CFG_LBMAP */ 237 #define PIXIS_VBOOT_LBMAP_NOR0 0x00 /* cfg_lbmap - boot from NOR 0 */ 238 #define PIXIS_VBOOT_LBMAP_PJET 0x01 /* cfg_lbmap - boot from projet */ 239 #define PIXIS_VBOOT_LBMAP_NAND 0x02 /* cfg_lbmap - boot from NAND */ 240 #define PIXIS_VBOOT_LBMAP_NOR1 0x03 /* cfg_lbmap - boot from NOR 1 */ 241 #define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ 242 #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ 243 #define PIXIS_VSPEED2 0x19 /* VELA VSpeed 2 */ 244 #define PIXIS_VSYSCLK0 0x1C /* VELA SYSCLK0 Register */ 245 #define PIXIS_VSYSCLK1 0x1D /* VELA SYSCLK1 Register */ 246 #define PIXIS_VSYSCLK2 0x1E /* VELA SYSCLK2 Register */ 247 #define PIXIS_VDDRCLK0 0x1F /* VELA DDRCLK0 Register */ 248 #define PIXIS_VDDRCLK1 0x20 /* VELA DDRCLK1 Register */ 249 #define PIXIS_VDDRCLK2 0x21 /* VELA DDRCLK2 Register */ 250 #define PIXIS_VWATCH 0x24 /* Watchdog Register */ 251 #define PIXIS_LED 0x25 /* LED Register */ 252 253 /* old pixis referenced names */ 254 #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ 255 #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ 256 #define CONFIG_SYS_PIXIS_VBOOT_MASK 0xc0 257 #define PIXIS_VSPEED2_TSEC1SER 0x8 258 #define PIXIS_VSPEED2_TSEC2SER 0x4 259 #define PIXIS_VSPEED2_TSEC3SER 0x2 260 #define PIXIS_VSPEED2_TSEC4SER 0x1 261 #define PIXIS_VCFGEN1_TSEC1SER 0x20 262 #define PIXIS_VCFGEN1_TSEC2SER 0x20 263 #define PIXIS_VCFGEN1_TSEC3SER 0x20 264 #define PIXIS_VCFGEN1_TSEC4SER 0x20 265 #define PIXIS_VSPEED2_MASK (PIXIS_VSPEED2_TSEC1SER \ 266 | PIXIS_VSPEED2_TSEC2SER \ 267 | PIXIS_VSPEED2_TSEC3SER \ 268 | PIXIS_VSPEED2_TSEC4SER) 269 #define PIXIS_VCFGEN1_MASK (PIXIS_VCFGEN1_TSEC1SER \ 270 | PIXIS_VCFGEN1_TSEC2SER \ 271 | PIXIS_VCFGEN1_TSEC3SER \ 272 | PIXIS_VCFGEN1_TSEC4SER) 273 274 #define CONFIG_SYS_INIT_RAM_LOCK 1 275 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ 276 #define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ 277 278 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ 279 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) 280 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 281 282 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 283 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 284 285 #define CONFIG_SYS_NAND_BASE 0xffa00000 286 #ifdef CONFIG_PHYS_64BIT 287 #define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull 288 #else 289 #define CONFIG_SYS_NAND_BASE_PHYS CONFIG_SYS_NAND_BASE 290 #endif 291 #define CONFIG_SYS_NAND_BASE_LIST { CONFIG_SYS_NAND_BASE,\ 292 CONFIG_SYS_NAND_BASE + 0x40000, \ 293 CONFIG_SYS_NAND_BASE + 0x80000,\ 294 CONFIG_SYS_NAND_BASE + 0xC0000} 295 #define CONFIG_SYS_MAX_NAND_DEVICE 4 296 #define CONFIG_MTD_NAND_VERIFY_WRITE 297 #define CONFIG_CMD_NAND 1 298 #define CONFIG_NAND_FSL_ELBC 1 299 #define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) 300 301 /* NAND flash config */ 302 #define CONFIG_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ 303 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 304 | BR_PS_8 /* Port Size = 8 bit */ \ 305 | BR_MS_FCM /* MSEL = FCM */ \ 306 | BR_V) /* valid */ 307 #define CONFIG_NAND_OR_PRELIM (0xFFFC0000 /* length 256K */ \ 308 | OR_FCM_PGS /* Large Page*/ \ 309 | OR_FCM_CSCT \ 310 | OR_FCM_CST \ 311 | OR_FCM_CHT \ 312 | OR_FCM_SCY_1 \ 313 | OR_FCM_TRLX \ 314 | OR_FCM_EHTR) 315 316 #define CONFIG_SYS_BR2_PRELIM CONFIG_NAND_BR_PRELIM /* NAND Base Address */ 317 #define CONFIG_SYS_OR2_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ 318 319 #define CONFIG_SYS_BR4_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x40000))\ 320 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 321 | BR_PS_8 /* Port Size = 8 bit */ \ 322 | BR_MS_FCM /* MSEL = FCM */ \ 323 | BR_V) /* valid */ 324 #define CONFIG_SYS_OR4_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ 325 #define CONFIG_SYS_BR5_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0x80000))\ 326 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 327 | BR_PS_8 /* Port Size = 8 bit */ \ 328 | BR_MS_FCM /* MSEL = FCM */ \ 329 | BR_V) /* valid */ 330 #define CONFIG_SYS_OR5_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ 331 332 #define CONFIG_SYS_BR6_PRELIM (BR_PHYS_ADDR((CONFIG_SYS_NAND_BASE_PHYS + 0xc0000))\ 333 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 334 | BR_PS_8 /* Port Size = 8 bit */ \ 335 | BR_MS_FCM /* MSEL = FCM */ \ 336 | BR_V) /* valid */ 337 #define CONFIG_SYS_OR6_PRELIM CONFIG_NAND_OR_PRELIM /* NAND Options */ 338 339 340 /* Serial Port - controlled on board with jumper J8 341 * open - index 2 342 * shorted - index 1 343 */ 344 #define CONFIG_CONS_INDEX 1 345 #undef CONFIG_SERIAL_SOFTWARE_FIFO 346 #define CONFIG_SYS_NS16550 347 #define CONFIG_SYS_NS16550_SERIAL 348 #define CONFIG_SYS_NS16550_REG_SIZE 1 349 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 350 351 #define CONFIG_SYS_BAUDRATE_TABLE \ 352 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 353 354 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 355 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 356 357 /* Use the HUSH parser */ 358 #define CONFIG_SYS_HUSH_PARSER 359 #ifdef CONFIG_SYS_HUSH_PARSER 360 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 361 #endif 362 363 /* 364 * Pass open firmware flat tree 365 */ 366 #define CONFIG_OF_LIBFDT 1 367 #define CONFIG_OF_BOARD_SETUP 1 368 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 369 370 #define CONFIG_SYS_64BIT_VSPRINTF 1 371 #define CONFIG_SYS_64BIT_STRTOUL 1 372 373 /* new uImage format support */ 374 #define CONFIG_FIT 1 375 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ 376 377 /* I2C */ 378 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 379 #define CONFIG_HARD_I2C /* I2C with hardware support */ 380 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 381 #define CONFIG_I2C_MULTI_BUS 382 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 383 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 384 #define CONFIG_SYS_I2C_SLAVE 0x7F 385 #define CONFIG_SYS_I2C_NOPROBES {{0,0x29}}/* Don't probe these addrs */ 386 #define CONFIG_SYS_I2C_OFFSET 0x3000 387 #define CONFIG_SYS_I2C2_OFFSET 0x3100 388 389 /* 390 * I2C2 EEPROM 391 */ 392 #define CONFIG_ID_EEPROM 393 #ifdef CONFIG_ID_EEPROM 394 #define CONFIG_SYS_I2C_EEPROM_NXID 395 #endif 396 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 397 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 398 #define CONFIG_SYS_EEPROM_BUS_NUM 1 399 400 /* 401 * General PCI 402 * Memory space is mapped 1-1, but I/O space must start from 0. 403 */ 404 405 /* controller 3, direct to uli, tgtid 3, Base address 8000 */ 406 #define CONFIG_SYS_PCIE3_MEM_VIRT 0x80000000 407 #ifdef CONFIG_PHYS_64BIT 408 #define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 409 #define CONFIG_SYS_PCIE3_MEM_PHYS 0xc00000000ull 410 #else 411 #define CONFIG_SYS_PCIE3_MEM_BUS 0x80000000 412 #define CONFIG_SYS_PCIE3_MEM_PHYS 0x80000000 413 #endif 414 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 415 #define CONFIG_SYS_PCIE3_IO_VIRT 0xffc00000 416 #define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 417 #ifdef CONFIG_PHYS_64BIT 418 #define CONFIG_SYS_PCIE3_IO_PHYS 0xfffc00000ull 419 #else 420 #define CONFIG_SYS_PCIE3_IO_PHYS 0xffc00000 421 #endif 422 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 423 424 /* controller 2, Slot 2, tgtid 2, Base address 9000 */ 425 #define CONFIG_SYS_PCIE2_MEM_VIRT 0xa0000000 426 #ifdef CONFIG_PHYS_64BIT 427 #define CONFIG_SYS_PCIE2_MEM_BUS 0xe0000000 428 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xc20000000ull 429 #else 430 #define CONFIG_SYS_PCIE2_MEM_BUS 0xa0000000 431 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xa0000000 432 #endif 433 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 434 #define CONFIG_SYS_PCIE2_IO_VIRT 0xffc10000 435 #define CONFIG_SYS_PCIE2_IO_BUS 0x00000000 436 #ifdef CONFIG_PHYS_64BIT 437 #define CONFIG_SYS_PCIE2_IO_PHYS 0xfffc10000ull 438 #else 439 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc10000 440 #endif 441 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 442 443 /* controller 1, Slot 1, tgtid 1, Base address a000 */ 444 #define CONFIG_SYS_PCIE1_MEM_VIRT 0xc0000000 445 #ifdef CONFIG_PHYS_64BIT 446 #define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 447 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc40000000ull 448 #else 449 #define CONFIG_SYS_PCIE1_MEM_BUS 0xc0000000 450 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xc0000000 451 #endif 452 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ 453 #define CONFIG_SYS_PCIE1_IO_VIRT 0xffc20000 454 #define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 455 #ifdef CONFIG_PHYS_64BIT 456 #define CONFIG_SYS_PCIE1_IO_PHYS 0xfffc20000ull 457 #else 458 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc20000 459 #endif 460 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 461 462 #if defined(CONFIG_PCI) 463 464 /*PCIE video card used*/ 465 #define VIDEO_IO_OFFSET CONFIG_SYS_PCIE1_IO_VIRT 466 467 /* video */ 468 #define CONFIG_VIDEO 469 470 #if defined(CONFIG_VIDEO) 471 #define CONFIG_BIOSEMU 472 #define CONFIG_CFB_CONSOLE 473 #define CONFIG_VIDEO_SW_CURSOR 474 #define CONFIG_VGA_AS_SINGLE_DEVICE 475 #define CONFIG_ATI_RADEON_FB 476 #define CONFIG_VIDEO_LOGO 477 /*#define CONFIG_CONSOLE_CURSOR*/ 478 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET 479 #endif 480 481 #define CONFIG_NET_MULTI 482 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 483 484 #undef CONFIG_EEPRO100 485 #undef CONFIG_TULIP 486 #undef CONFIG_RTL8139 487 488 #ifndef CONFIG_PCI_PNP 489 #define PCI_ENET0_IOADDR CONFIG_SYS_PCIE3_IO_BUS 490 #define PCI_ENET0_MEMADDR CONFIG_SYS_PCIE3_IO_BUS 491 #define PCI_IDSEL_NUMBER 0x11 /* IDSEL = AD11 */ 492 #endif 493 494 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 495 #define CONFIG_DOS_PARTITION 496 #define CONFIG_SCSI_AHCI 497 498 #ifdef CONFIG_SCSI_AHCI 499 #define CONFIG_SATA_ULI5288 500 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 4 501 #define CONFIG_SYS_SCSI_MAX_LUN 1 502 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * CONFIG_SYS_SCSI_MAX_LUN) 503 #define CONFIG_SYS_SCSI_MAXDEVICE CONFIG_SYS_SCSI_MAX_DEVICE 504 #endif /* SCSI */ 505 506 #endif /* CONFIG_PCI */ 507 508 509 #if defined(CONFIG_TSEC_ENET) 510 511 #ifndef CONFIG_NET_MULTI 512 #define CONFIG_NET_MULTI 1 513 #endif 514 515 #define CONFIG_MII 1 /* MII PHY management */ 516 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 517 #define CONFIG_TSEC1 1 518 #define CONFIG_TSEC1_NAME "eTSEC1" 519 #define CONFIG_TSEC2 1 520 #define CONFIG_TSEC2_NAME "eTSEC2" 521 #define CONFIG_TSEC3 1 522 #define CONFIG_TSEC3_NAME "eTSEC3" 523 #define CONFIG_TSEC4 1 524 #define CONFIG_TSEC4_NAME "eTSEC4" 525 526 #define CONFIG_PIXIS_SGMII_CMD 527 #define CONFIG_FSL_SGMII_RISER 1 528 #define SGMII_RISER_PHY_OFFSET 0x1c 529 530 #ifdef CONFIG_FSL_SGMII_RISER 531 #define CONFIG_SYS_TBIPA_VALUE 0x10 /* avoid conflict with eTSEC4 paddr */ 532 #endif 533 534 #define TSEC1_PHY_ADDR 0 535 #define TSEC2_PHY_ADDR 1 536 #define TSEC3_PHY_ADDR 2 537 #define TSEC4_PHY_ADDR 3 538 539 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 540 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 541 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 542 #define TSEC4_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 543 544 #define TSEC1_PHYIDX 0 545 #define TSEC2_PHYIDX 0 546 #define TSEC3_PHYIDX 0 547 #define TSEC4_PHYIDX 0 548 549 #define CONFIG_ETHPRIME "eTSEC1" 550 551 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 552 #endif /* CONFIG_TSEC_ENET */ 553 554 /* 555 * Environment 556 */ 557 #define CONFIG_ENV_IS_IN_FLASH 1 558 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 559 #define CONFIG_ENV_ADDR 0xfff80000 560 #else 561 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE) 562 #endif 563 #define CONFIG_ENV_SIZE 0x2000 564 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 565 566 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 567 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 568 569 /* 570 * Command line configuration. 571 */ 572 #include <config_cmd_default.h> 573 574 #define CONFIG_CMD_IRQ 575 #define CONFIG_CMD_PING 576 #define CONFIG_CMD_I2C 577 #define CONFIG_CMD_MII 578 #define CONFIG_CMD_ELF 579 #define CONFIG_CMD_IRQ 580 #define CONFIG_CMD_SETEXPR 581 582 #if defined(CONFIG_PCI) 583 #define CONFIG_CMD_PCI 584 #define CONFIG_CMD_NET 585 #define CONFIG_CMD_SCSI 586 #define CONFIG_CMD_EXT2 587 #endif 588 589 #undef CONFIG_WATCHDOG /* watchdog disabled */ 590 591 /* 592 * Miscellaneous configurable options 593 */ 594 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 595 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 596 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 597 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 598 #if defined(CONFIG_CMD_KGDB) 599 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 600 #else 601 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 602 #endif 603 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 604 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 605 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 606 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 607 608 /* 609 * For booting Linux, the board info and command line data 610 * have to be in the first 16 MB of memory, since this is 611 * the maximum mapped by the Linux kernel during initialization. 612 */ 613 #define CONFIG_SYS_BOOTMAPSZ (16 << 20) /* Initial Memory map for Linux*/ 614 615 /* 616 * Internal Definitions 617 * 618 * Boot Flags 619 */ 620 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ 621 #define BOOTFLAG_WARM 0x02 /* Software reboot */ 622 623 #if defined(CONFIG_CMD_KGDB) 624 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 625 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 626 #endif 627 628 /* 629 * Environment Configuration 630 */ 631 632 /* The mac addresses for all ethernet interface */ 633 #if defined(CONFIG_TSEC_ENET) 634 #define CONFIG_HAS_ETH0 635 #define CONFIG_ETHADDR 00:E0:0C:02:00:FD 636 #define CONFIG_HAS_ETH1 637 #define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD 638 #define CONFIG_HAS_ETH2 639 #define CONFIG_ETH2ADDR 00:E0:0C:02:02:FD 640 #define CONFIG_HAS_ETH3 641 #define CONFIG_ETH3ADDR 00:E0:0C:02:03:FD 642 #endif 643 644 #define CONFIG_IPADDR 192.168.1.254 645 646 #define CONFIG_HOSTNAME unknown 647 #define CONFIG_ROOTPATH /opt/nfsroot 648 #define CONFIG_BOOTFILE uImage 649 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 650 651 #define CONFIG_SERVERIP 192.168.1.1 652 #define CONFIG_GATEWAYIP 192.168.1.1 653 #define CONFIG_NETMASK 255.255.255.0 654 655 /* default location for tftp and bootm */ 656 #define CONFIG_LOADADDR 1000000 657 658 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 659 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 660 661 #define CONFIG_BAUDRATE 115200 662 663 #define CONFIG_EXTRA_ENV_SETTINGS \ 664 "memctl_intlv_ctl=2\0" \ 665 "netdev=eth0\0" \ 666 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 667 "tftpflash=tftpboot $loadaddr $uboot; " \ 668 "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ 669 "erase " MK_STR(TEXT_BASE) " +$filesize; " \ 670 "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ 671 "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ 672 "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ 673 "consoledev=ttyS0\0" \ 674 "ramdiskaddr=2000000\0" \ 675 "ramdiskfile=8572ds/ramdisk.uboot\0" \ 676 "fdtaddr=c00000\0" \ 677 "fdtfile=8572ds/mpc8572ds.dtb\0" \ 678 "bdev=sda3\0" 679 680 #define CONFIG_HDBOOT \ 681 "setenv bootargs root=/dev/$bdev rw " \ 682 "console=$consoledev,$baudrate $othbootargs;" \ 683 "tftp $loadaddr $bootfile;" \ 684 "tftp $fdtaddr $fdtfile;" \ 685 "bootm $loadaddr - $fdtaddr" 686 687 #define CONFIG_NFSBOOTCOMMAND \ 688 "setenv bootargs root=/dev/nfs rw " \ 689 "nfsroot=$serverip:$rootpath " \ 690 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 691 "console=$consoledev,$baudrate $othbootargs;" \ 692 "tftp $loadaddr $bootfile;" \ 693 "tftp $fdtaddr $fdtfile;" \ 694 "bootm $loadaddr - $fdtaddr" 695 696 #define CONFIG_RAMBOOTCOMMAND \ 697 "setenv bootargs root=/dev/ram rw " \ 698 "console=$consoledev,$baudrate $othbootargs;" \ 699 "tftp $ramdiskaddr $ramdiskfile;" \ 700 "tftp $loadaddr $bootfile;" \ 701 "tftp $fdtaddr $fdtfile;" \ 702 "bootm $loadaddr $ramdiskaddr $fdtaddr" 703 704 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 705 706 #endif /* __CONFIG_H */ 707