1 /* 2 * Copyright 2007 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 * mpc8544ds board configuration file 25 * 26 */ 27 #ifndef __CONFIG_H 28 #define __CONFIG_H 29 30 /* High Level Configuration Options */ 31 #define CONFIG_BOOKE 1 /* BOOKE */ 32 #define CONFIG_E500 1 /* BOOKE e500 family */ 33 #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ 34 #define CONFIG_MPC8544 1 35 #define CONFIG_MPC8544DS 1 36 37 #define CONFIG_PCI 1 /* Enable PCI/PCIE */ 38 #define CONFIG_PCI1 1 /* PCI controller 1 */ 39 #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ 40 #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ 41 #define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ 42 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ 43 44 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 45 #define CONFIG_ENV_OVERWRITE 46 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ 47 #undef CONFIG_DDR_DLL 48 #define CONFIG_DDR_2T_TIMING /* Sets the 2T timing bit */ 49 50 #define CONFIG_DDR_ECC /* only for ECC DDR module */ 51 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ 52 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 53 54 #define CONFIG_DDR_ECC_CMD 55 #define CONFIG_INTERRUPTS /* enable pci, srio, ddr interrupts */ 56 57 /* 58 * When initializing flash, if we cannot find the manufacturer ID, 59 * assume this is the AMD flash associated with the CDS board. 60 * This allows booting from a promjet. 61 */ 62 #define CONFIG_ASSUME_AMD_FLASH 63 64 #define MPC85xx_DDR_SDRAM_CLK_CNTL /* 85xx has clock control reg */ 65 66 #ifndef __ASSEMBLY__ 67 extern unsigned long get_board_sys_clk(unsigned long dummy); 68 #endif 69 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC85xx */ 70 71 /* 72 * These can be toggled for performance analysis, otherwise use default. 73 */ 74 #define CONFIG_L2_CACHE /* toggle L2 cache */ 75 #define CONFIG_BTB /* toggle branch predition */ 76 #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ 77 #define CONFIG_CLEAR_LAW0 /* Clear LAW0 in cpu_init_r */ 78 79 /* 80 * Only possible on E500 Version 2 or newer cores. 81 */ 82 #define CONFIG_ENABLE_36BIT_PHYS 1 83 84 #define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ 85 86 #undef CFG_DRAM_TEST /* memory test, takes time */ 87 #define CFG_MEMTEST_START 0x00200000 /* memtest works on */ 88 #define CFG_MEMTEST_END 0x00400000 89 #define CFG_ALT_MEMTEST 90 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 91 92 /* 93 * Base addresses -- Note these are effective addresses where the 94 * actual resources get mapped (not physical addresses) 95 */ 96 #define CFG_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ 97 #define CFG_CCSRBAR 0xe0000000 /* relocated CCSRBAR */ 98 #define CFG_IMMR CFG_CCSRBAR /* PQII uses CFG_IMMR */ 99 100 #define CFG_PCI1_ADDR (CFG_CCSRBAR+0x8000) 101 #define CFG_PCIE1_ADDR (CFG_CCSRBAR+0xa000) 102 #define CFG_PCIE2_ADDR (CFG_CCSRBAR+0x9000) 103 #define CFG_PCIE3_ADDR (CFG_CCSRBAR+0xb000) 104 105 /* 106 * DDR Setup 107 */ 108 #define CFG_DDR_SDRAM_BASE 0x00000000 /* DDR is system memory*/ 109 #define CFG_SDRAM_BASE CFG_DDR_SDRAM_BASE 110 111 #define SPD_EEPROM_ADDRESS 0x51 /* DDR DIMM */ 112 113 /* 114 * Make sure required options are set 115 */ 116 #ifndef CONFIG_SPD_EEPROM 117 #error ("CONFIG_SPD_EEPROM is required") 118 #endif 119 120 #undef CONFIG_CLOCKS_IN_MHZ 121 122 /* 123 * Memory map 124 * 125 * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable 126 * 127 * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable 128 * 129 * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable 130 * 131 * 0xe000_0000 0xe00f_ffff CCSR 1M non-cacheable 132 * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable 133 * 134 * Localbus cacheable 135 * 136 * 0xf000_0000 0xf3ff_ffff SDRAM 64M Cacheable 137 * 0xf401_0000 0xf401_3fff L1 for stack 4K Cacheable TLB0 138 * 139 * Localbus non-cacheable 140 * 141 * 0xf800_0000 0xf80f_ffff NVRAM/CADMUS (*) 1M non-cacheable 142 * 0xff00_0000 0xff7f_ffff FLASH (2nd bank) 8M non-cacheable 143 * 0xff80_0000 0xffff_ffff FLASH (boot bank) 8M non-cacheable 144 * 145 */ 146 147 /* 148 * Local Bus Definitions 149 */ 150 #define CFG_BOOT_BLOCK 0xfc000000 /* boot TLB */ 151 152 #define CFG_LBC_CACHE_BASE 0xf0000000 /* Localbus cacheable */ 153 154 #define CFG_FLASH_BASE 0xff800000 /* start of FLASH 8M */ 155 156 #define CFG_BR0_PRELIM 0xff801001 157 #define CFG_BR1_PRELIM 0xfe801001 158 159 #define CFG_OR0_PRELIM 0xff806e65 160 #define CFG_OR1_PRELIM 0xff806e65 161 162 #define CFG_FLASH_BANKS_LIST {0xfe800000,CFG_FLASH_BASE} 163 164 #define CFG_MAX_FLASH_BANKS 2 /* number of banks */ 165 #define CFG_MAX_FLASH_SECT 128 /* sectors per device */ 166 #undef CFG_FLASH_CHECKSUM 167 #define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 168 #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 169 170 #define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ 171 172 #define CFG_FLASH_CFI_DRIVER 173 #define CFG_FLASH_CFI 174 #define CFG_FLASH_EMPTY_INFO 175 176 #define CFG_LBC_NONCACHE_BASE 0xf8000000 177 178 #define CFG_BR2_PRELIM 0xf8201001 /* port size 16bit */ 179 #define CFG_OR2_PRELIM 0xfff06ff7 /* 1MB Compact Flash area*/ 180 181 #define CFG_BR3_PRELIM 0xf8100801 /* port size 8bit */ 182 #define CFG_OR3_PRELIM 0xfff06ff7 /* 1MB PIXIS area*/ 183 184 #define PIXIS_BASE 0xf8100000 /* PIXIS registers */ 185 #define PIXIS_ID 0x0 /* Board ID at offset 0 */ 186 #define PIXIS_VER 0x1 /* Board version at offset 1 */ 187 #define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ 188 #define PIXIS_RST 0x4 /* PIXIS Reset Control register */ 189 #define PIXIS_AUX 0x6 /* PIXIS Auxiliary register; Scratch 190 * register */ 191 #define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ 192 #define PIXIS_VCTL 0x10 /* VELA Control Register */ 193 #define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ 194 #define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ 195 #define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ 196 #define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ 197 #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ 198 #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ 199 #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ 200 201 202 /* define to use L1 as initial stack */ 203 #define CONFIG_L1_INIT_RAM 1 204 #define CFG_INIT_L1_LOCK 1 205 #define CFG_INIT_L1_ADDR 0xf4010000 /* Initial L1 address */ 206 #define CFG_INIT_L1_END 0x00004000 /* End of used area in RAM */ 207 208 /* define to use L2SRAM as initial stack */ 209 #undef CONFIG_L2_INIT_RAM 210 #define CFG_INIT_L2_ADDR 0xf8fc0000 211 #define CFG_INIT_L2_END 0x00040000 /* End of used area in RAM */ 212 213 #ifdef CONFIG_L1_INIT_RAM 214 #define CFG_INIT_RAM_ADDR CFG_INIT_L1_ADDR 215 #define CFG_INIT_RAM_END CFG_INIT_L1_END 216 #else 217 #define CFG_INIT_RAM_ADDR CFG_INIT_L2_ADDR 218 #define CFG_INIT_RAM_END CFG_INIT_L2_END 219 #endif 220 221 #define CFG_GBL_DATA_SIZE 128 /* num bytes initial data */ 222 #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) 223 #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET 224 225 #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 226 #define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ 227 228 /* Serial Port - controlled on board with jumper J8 229 * open - index 2 230 * shorted - index 1 231 */ 232 #define CONFIG_CONS_INDEX 1 233 #undef CONFIG_SERIAL_SOFTWARE_FIFO 234 #define CFG_NS16550 235 #define CFG_NS16550_SERIAL 236 #define CFG_NS16550_REG_SIZE 1 237 #define CFG_NS16550_CLK get_bus_freq(0) 238 239 #define CFG_BAUDRATE_TABLE \ 240 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 241 242 #define CFG_NS16550_COM1 (CFG_CCSRBAR+0x4500) 243 #define CFG_NS16550_COM2 (CFG_CCSRBAR+0x4600) 244 245 /* Use the HUSH parser */ 246 #define CFG_HUSH_PARSER 247 #ifdef CFG_HUSH_PARSER 248 #define CFG_PROMPT_HUSH_PS2 "> " 249 #endif 250 251 /* pass open firmware flat tree */ 252 #define CONFIG_OF_FLAT_TREE 1 253 #define CONFIG_OF_BOARD_SETUP 1 254 255 #define OF_CPU "PowerPC,8544@0" 256 #define OF_SOC "soc8544@e0000000" 257 #define OF_TBCLK (bd->bi_busfreq / 8) 258 #define OF_STDOUT_PATH "/soc8544@e0000000/serial@4500" 259 260 /* I2C */ 261 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 262 #define CONFIG_HARD_I2C /* I2C with hardware support */ 263 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 264 #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ 265 #define CFG_I2C_EEPROM_ADDR 0x57 266 #define CFG_I2C_SLAVE 0x7F 267 #define CFG_I2C_NOPROBES {0x69} /* Don't probe these addrs */ 268 #define CFG_I2C_OFFSET 0x3100 269 270 /* 271 * General PCI 272 * Memory space is mapped 1-1, but I/O space must start from 0. 273 */ 274 #define CFG_PCIE_PHYS 0x80000000 /* 1G PCIE TLB */ 275 #define CFG_PCI_PHYS 0xc0000000 /* 512M PCI TLB */ 276 277 #define CFG_PCI1_MEM_BASE 0xc0000000 278 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE 279 #define CFG_PCI1_MEM_SIZE 0x20000000 /* 512M */ 280 #define CFG_PCI1_IO_BASE 0x00000000 281 #define CFG_PCI1_IO_PHYS 0xe1000000 282 #define CFG_PCI1_IO_SIZE 0x00010000 /* 64k */ 283 284 /* PCI view of System Memory */ 285 #define CFG_PCI_MEMORY_BUS 0x00000000 286 #define CFG_PCI_MEMORY_PHYS 0x00000000 287 #define CFG_PCI_MEMORY_SIZE 0x80000000 288 289 /* controller 2, Slot 1, tgtid 1, Base address 9000 */ 290 #define CFG_PCIE2_MEM_BASE 0x80000000 291 #define CFG_PCIE2_MEM_PHYS CFG_PCIE2_MEM_BASE 292 #define CFG_PCIE2_MEM_SIZE 0x20000000 /* 512M */ 293 #define CFG_PCIE2_IO_BASE 0x00000000 294 #define CFG_PCIE2_IO_PHYS 0xe1010000 295 #define CFG_PCIE2_IO_SIZE 0x00010000 /* 64k */ 296 297 /* controller 1, Slot 2,tgtid 2, Base address a000 */ 298 #define CFG_PCIE1_MEM_BASE 0xa0000000 299 #define CFG_PCIE1_MEM_PHYS CFG_PCIE1_MEM_BASE 300 #define CFG_PCIE1_MEM_SIZE 0x10000000 /* 256M */ 301 #define CFG_PCIE1_IO_BASE 0x00000000 302 #define CFG_PCIE1_IO_PHYS 0xe1020000 303 #define CFG_PCIE1_IO_SIZE 0x00010000 /* 64k */ 304 305 /* controller 3, direct to uli, tgtid 3, Base address b000 */ 306 #define CFG_PCIE3_MEM_BASE 0xb0000000 307 #define CFG_PCIE3_MEM_PHYS CFG_PCIE3_MEM_BASE 308 #define CFG_PCIE3_MEM_SIZE 0x00100000 /* 1M */ 309 #define CFG_PCIE3_IO_BASE 0x00000000 310 #define CFG_PCIE3_IO_PHYS 0xb0100000 /* reuse mem LAW */ 311 #define CFG_PCIE3_IO_SIZE 0x00100000 /* 1M */ 312 313 #if defined(CONFIG_PCI) 314 315 #define CONFIG_NET_MULTI 316 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 317 318 #undef CONFIG_EEPRO100 319 #undef CONFIG_TULIP 320 #define CONFIG_RTL8139 321 322 #ifdef CONFIG_RTL8139 323 /* This macro is used by RTL8139 but not defined in PPC architecture */ 324 #define KSEG1ADDR(x) (x) 325 #define _IO_BASE 0x00000000 326 #endif 327 328 #ifndef CONFIG_PCI_PNP 329 #define PCI_ENET0_IOADDR CFG_PCI1_IO_BASE 330 #define PCI_ENET0_MEMADDR CFG_PCI1_IO_BASE 331 #define PCI_IDSEL_NUMBER 0x11 /* IDSEL = AD11 */ 332 #endif 333 334 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 335 #define CONFIG_DOS_PARTITION 336 #define CONFIG_SCSI_AHCI 337 338 #ifdef CONFIG_SCSI_AHCI 339 #define CONFIG_SATA_ULI5288 340 #define CFG_SCSI_MAX_SCSI_ID 4 341 #define CFG_SCSI_MAX_LUN 1 342 #define CFG_SCSI_MAX_DEVICE (CFG_SCSI_MAX_SCSI_ID * CFG_SCSI_MAX_LUN) 343 #define CFG_SCSI_MAXDEVICE CFG_SCSI_MAX_DEVICE 344 #endif /* SCSCI */ 345 346 #endif /* CONFIG_PCI */ 347 348 349 #if defined(CONFIG_TSEC_ENET) 350 351 #ifndef CONFIG_NET_MULTI 352 #define CONFIG_NET_MULTI 1 353 #endif 354 355 #define CONFIG_MII 1 /* MII PHY management */ 356 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 357 #define CONFIG_TSEC1 1 358 #define CONFIG_TSEC1_NAME "eTSEC1" 359 #define CONFIG_TSEC3 1 360 #define CONFIG_TSEC3_NAME "eTSEC3" 361 362 #define TSEC1_PHY_ADDR 0 363 #define TSEC3_PHY_ADDR 1 364 365 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 366 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 367 368 #define TSEC1_PHYIDX 0 369 #define TSEC3_PHYIDX 0 370 371 #define CONFIG_ETHPRIME "eTSEC1" 372 373 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 374 #endif /* CONFIG_TSEC_ENET */ 375 376 /* 377 * Environment 378 */ 379 #define CFG_ENV_IS_IN_FLASH 1 380 #if CFG_MONITOR_BASE > 0xfff80000 381 #define CFG_ENV_ADDR 0xfff80000 382 #else 383 #define CFG_ENV_ADDR (CFG_MONITOR_BASE + 0x40000) 384 #endif 385 #define CFG_ENV_SIZE 0x2000 386 #define CFG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) */ 387 388 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 389 #define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 390 391 /* 392 * BOOTP options 393 */ 394 #define CONFIG_BOOTP_BOOTFILESIZE 395 #define CONFIG_BOOTP_BOOTPATH 396 #define CONFIG_BOOTP_GATEWAY 397 #define CONFIG_BOOTP_HOSTNAME 398 399 400 /* 401 * Command line configuration. 402 */ 403 #include <config_cmd_default.h> 404 405 #define CONFIG_CMD_PING 406 #define CONFIG_CMD_I2C 407 #define CONFIG_CMD_MII 408 409 #if defined(CONFIG_PCI) 410 #define CONFIG_CMD_PCI 411 #define CONFIG_CMD_BEDBUG 412 #define CONFIG_CMD_NET 413 #define CONFIG_CMD_SCSI 414 #define CONFIG_CMD_EXT2 415 #endif 416 417 418 #undef CONFIG_WATCHDOG /* watchdog disabled */ 419 420 /* 421 * Miscellaneous configurable options 422 */ 423 #define CFG_LONGHELP /* undef to save memory */ 424 #define CFG_LOAD_ADDR 0x2000000 /* default load address */ 425 #define CFG_PROMPT "=> " /* Monitor Command Prompt */ 426 #if defined(CONFIG_CMD_KGDB) 427 #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ 428 #else 429 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ 430 #endif 431 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ 432 #define CFG_MAXARGS 16 /* max number of command args */ 433 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ 434 #define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ 435 436 /* 437 * For booting Linux, the board info and command line data 438 * have to be in the first 8 MB of memory, since this is 439 * the maximum mapped by the Linux kernel during initialization. 440 */ 441 #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ 442 443 /* Cache Configuration */ 444 #define CFG_DCACHE_SIZE 32768 445 #define CFG_CACHELINE_SIZE 32 446 #if defined(CONFIG_CMD_KGDB) 447 #define CFG_CACHELINE_SHIFT 5 /*log base 2 of the above value*/ 448 #endif 449 450 /* 451 * Internal Definitions 452 * 453 * Boot Flags 454 */ 455 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ 456 #define BOOTFLAG_WARM 0x02 /* Software reboot */ 457 458 #if defined(CONFIG_CMD_KGDB) 459 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 460 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 461 #endif 462 463 /* 464 * Environment Configuration 465 */ 466 467 /* The mac addresses for all ethernet interface */ 468 #if defined(CONFIG_TSEC_ENET) 469 #define CONFIG_HAS_ETH0 470 #define CONFIG_ETHADDR 00:E0:0C:02:00:FD 471 #define CONFIG_HAS_ETH1 472 #define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD 473 #define CONFIG_HAS_ETH2 474 #define CONFIG_ETH2ADDR 00:E0:0C:02:02:FD 475 #define CONFIG_HAS_ETH3 476 #define CONFIG_ETH3ADDR 00:E0:0C:02:03:FD 477 #endif 478 479 #define CONFIG_IPADDR 192.168.1.251 480 481 #define CONFIG_HOSTNAME 8544ds_unknown 482 #define CONFIG_ROOTPATH /nfs/mpc85xx 483 #define CONFIG_BOOTFILE 8544ds/uImage.uboot 484 #define CONFIG_UBOOTPATH 8544ds/u-boot.bin /* TFTP server */ 485 486 #define CONFIG_SERVERIP 192.168.0.1 487 #define CONFIG_GATEWAYIP 192.168.0.1 488 #define CONFIG_NETMASK 255.255.0.0 489 490 #define CONFIG_LOADADDR 1000000 /*default location for tftp and bootm*/ 491 492 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 493 #undef CONFIG_BOOTARGS /* the boot command will set bootargs*/ 494 495 #define CONFIG_BAUDRATE 115200 496 497 #if defined(CONFIG_PCIE1) || defined(CONFIG_PCIE2) || defined(CONFIG_PCIE3) 498 #define PCIE_ENV \ 499 "pciereg=md ${a}000 6; md ${a}020 4; md ${a}bf8 2; echo o;md ${a}c00 25;" \ 500 "echo i; md ${a}da0 15; echo e;md ${a}e00 e; echo d; md ${a}f00 c\0" \ 501 "pcieerr=md ${a}020 1; md ${a}e00 e;" \ 502 "pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \ 503 "pci d.w $b.0 56 1;" \ 504 "pci d $b.0 104 1;pci d $b.0 110 1;pci d $b.0 130 1\0" \ 505 "pcieerrc=mw ${a}020 ffffffff; mw ${a}e00 ffffffff;" \ 506 "pci w.b $b.0 7 ff; pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff;" \ 507 "pci w $b.0 104 ffffffff; pci w $b.0 110 ffffffff;" \ 508 "pci w $b.0 130 ffffffff\0" \ 509 "pciecfg=pci d $b.0 0 20; pci d $b.0 100 e; pci d $b.0 400 69\0" \ 510 "pcie1regs=setenv a e000a; run pciereg\0" \ 511 "pcie2regs=setenv a e0009; run pciereg\0" \ 512 "pcie3regs=setenv a e000b; run pciereg\0" \ 513 "pcie1cfg=setenv b 3; run pciecfg\0" \ 514 "pcie2cfg=setenv b 5; run pciecfg\0" \ 515 "pcie3cfg=setenv b 0; run pciecfg\0" \ 516 "pcie1err=setenv a e000a; setenv b 3; run pcieerr\0" \ 517 "pcie2err=setenv a e0009; setenv b 5; run pcieerr\0" \ 518 "pcie3err=setenv a e000b; setenv b 0; run pcieerr\0" \ 519 "pcie1errc=setenv a e000a; setenv b 3; run pcieerrc\0" \ 520 "pcie2errc=setenv a e0009; setenv b 5; run pcieerrc\0" \ 521 "pcie3errc=setenv a e000b; setenv b 0; run pcieerrc\0" 522 #else 523 #define PCIE_ENV "" 524 #endif 525 526 #if defined(CONFIG_PCI1) 527 #define PCI_ENV \ 528 "pcireg=md ${a}000 3; echo o;md ${a}c00 25; echo i; md ${a}da0 15;" \ 529 "echo e;md ${a}e00 9\0" \ 530 "pci1regs=setenv a e0008; run pcireg\0" \ 531 "pcierr=md ${a}e00 8; pci d.b $b.0 7 1; pci d.w $b.0 1e 1;" \ 532 "pci d.w $b.0 56 1\0" \ 533 "pcierrc=mw ${a}e00 ffffffff; mw ${a}e0c 0; pci w.b $b.0 7 ff;" \ 534 "pci w.w $b.0 1e ffff; pci w.w $b.0 56 ffff\0" \ 535 "pci1err=setenv a e0008; setenv b 7; run pcierr\0" \ 536 "pci1errc=setenv a e0008; setenv b 7; run pcierrc\0" 537 #else 538 #define PCI_ENV "" 539 #endif 540 541 #if defined(CONFIG_TSEC_ENET) 542 #define ENET_ENV \ 543 "enetreg1=md ${a}000 2; md ${a}010 9; md ${a}050 4; md ${a}08c 1;" \ 544 "md ${a}098 2\0" \ 545 "enetregt=echo t;md ${a}100 6; md ${a}140 2; md ${a}180 10; md ${a}200 10\0" \ 546 "enetregr=echo r;md ${a}300 6; md ${a}330 5; md ${a}380 10; md ${a}400 10\0" \ 547 "enetregm=echo mac;md ${a}500 5; md ${a}520 28;echo fifo;md ${a}a00 1;" \ 548 "echo mib;md ${a}680 31\0" \ 549 "enetreg=run enetreg1; run enetregm; run enetregt; run enetregr\0" \ 550 "enet1regs=setenv a e0024; run enetreg\0" \ 551 "enet3regs=setenv a e0026; run enetreg\0" 552 #else 553 #define ENET_ENV "" 554 #endif 555 556 #define CONFIG_EXTRA_ENV_SETTINGS \ 557 "netdev=eth0\0" \ 558 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 559 "tftpflash=tftpboot $loadaddr $uboot; " \ 560 "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ 561 "erase " MK_STR(TEXT_BASE) " +$filesize; " \ 562 "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ 563 "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ 564 "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ 565 "consoledev=ttyS0\0" \ 566 "ramdiskaddr=2000000\0" \ 567 "ramdiskfile=8544ds/ramdisk.uboot\0" \ 568 "dtbaddr=c00000\0" \ 569 "dtbfile=8544ds/mpc8544ds.dtb\0" \ 570 "bdev=sda3\0" \ 571 "eoi=mw e00400b0 0\0" \ 572 "iack=md e00400a0 1\0" \ 573 "ddrreg=md ${a}000 8; md ${a}080 8;md ${a}100 d; md ${a}140 4; md ${a}bf0 4;" \ 574 "md ${a}e00 3; md ${a}e20 3; md ${a}e40 7; md ${a}f00 5\0" \ 575 "ddrregs=setenv a e0002; run ddrreg\0" \ 576 "gureg=md ${a}000 2c; md ${a}0b0 1; md ${a}0c0 1; md ${a}b20 3;" \ 577 "md ${a}e00 1; md ${a}e60 1; md ${a}ef0 15\0" \ 578 "guregs=setenv a e00e0; run gureg\0" \ 579 "ecmreg=md ${a}000 1; md ${a}010 1; md ${a}bf8 2; md ${a}e00 6\0" \ 580 "ecmregs=setenv a e0001; run ecmreg\0" \ 581 "lawregs=md e0000c08 4b\0" \ 582 "lbcregs=md e0005000 36\0" \ 583 "dma0regs=md e0021100 12\0" \ 584 "dma1regs=md e0021180 12\0" \ 585 "dma2regs=md e0021200 12\0" \ 586 "dma3regs=md e0021280 12\0" \ 587 PCIE_ENV \ 588 PCI_ENV \ 589 ENET_ENV 590 591 592 #define CONFIG_NFSBOOTCOMMAND \ 593 "setenv bootargs root=/dev/nfs rw " \ 594 "nfsroot=$serverip:$rootpath " \ 595 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 596 "console=$consoledev,$baudrate $othbootargs;" \ 597 "tftp $loadaddr $bootfile;" \ 598 "tftp $dtbaddr $dtbfile;" \ 599 "bootm $loadaddr - $dtbaddr" 600 601 602 #define CONFIG_RAMBOOTCOMMAND \ 603 "setenv bootargs root=/dev/ram rw " \ 604 "console=$consoledev,$baudrate $othbootargs;" \ 605 "tftp $ramdiskaddr $ramdiskfile;" \ 606 "tftp $loadaddr $bootfile;" \ 607 "tftp $dtbaddr $dtbfile;" \ 608 "bootm $loadaddr $ramdiskaddr $dtbaddr" 609 610 #define CONFIG_BOOTCOMMAND \ 611 "setenv bootargs root=/dev/$bdev rw " \ 612 "console=$consoledev,$baudrate $othbootargs;" \ 613 "tftp $loadaddr $bootfile;" \ 614 "tftp $dtbaddr $dtbfile;" \ 615 "bootm $loadaddr - $dtbaddr" 616 617 #endif /* __CONFIG_H */ 618