1 /* 2 * Copyright 2008 Freescale Semiconductor, Inc. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 * mpc8536ds board configuration file 25 * 26 */ 27 #ifndef __CONFIG_H 28 #define __CONFIG_H 29 30 /* High Level Configuration Options */ 31 #define CONFIG_BOOKE 1 /* BOOKE */ 32 #define CONFIG_E500 1 /* BOOKE e500 family */ 33 #define CONFIG_MPC85xx 1 /* MPC8540/60/55/41/48 */ 34 #define CONFIG_MPC8536 1 35 #define CONFIG_MPC8536DS 1 36 37 #define CONFIG_PCI 1 /* Enable PCI/PCIE */ 38 #define CONFIG_PCI1 1 /* Enable PCI controller 1 */ 39 #define CONFIG_PCIE1 1 /* PCIE controler 1 (slot 1) */ 40 #define CONFIG_PCIE2 1 /* PCIE controler 2 (slot 2) */ 41 #define CONFIG_PCIE3 1 /* PCIE controler 3 (ULI bridge) */ 42 #define CONFIG_FSL_PCI_INIT 1 /* Use common FSL init code */ 43 #define CONFIG_FSL_PCIE_RESET 1 /* need PCIe reset errata */ 44 45 #define CONFIG_FSL_LAW 1 /* Use common FSL init code */ 46 47 #define CONFIG_TSEC_ENET /* tsec ethernet support */ 48 #define CONFIG_ENV_OVERWRITE 49 50 /* 51 * When initializing flash, if we cannot find the manufacturer ID, 52 * assume this is the AMD flash associated with the CDS board. 53 * This allows booting from a promjet. 54 */ 55 #define CONFIG_ASSUME_AMD_FLASH 56 57 #ifndef __ASSEMBLY__ 58 extern unsigned long get_board_sys_clk(unsigned long dummy); 59 extern unsigned long get_board_ddr_clk(unsigned long dummy); 60 #endif 61 #define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) /* sysclk for MPC85xx */ 62 #define CONFIG_DDR_CLK_FREQ get_board_ddr_clk(0) 63 #define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 clock chip ref freq */ 64 #define CONFIG_GET_CLK_FROM_ICS307 /* decode sysclk and ddrclk freq 65 from ICS307 instead of switches */ 66 67 /* 68 * These can be toggled for performance analysis, otherwise use default. 69 */ 70 #define CONFIG_L2_CACHE /* toggle L2 cache */ 71 #define CONFIG_BTB /* toggle branch predition */ 72 #define CONFIG_ADDR_STREAMING /* toggle addr streaming */ 73 74 #define CONFIG_ENABLE_36BIT_PHYS 1 75 76 #define CONFIG_SYS_MEMTEST_START 0x00000000 /* memtest works on */ 77 #define CONFIG_SYS_MEMTEST_END 0x7fffffff 78 #define CONFIG_PANIC_HANG /* do not reset board on panic */ 79 80 /* 81 * Base addresses -- Note these are effective addresses where the 82 * actual resources get mapped (not physical addresses) 83 */ 84 #define CONFIG_SYS_CCSRBAR_DEFAULT 0xff700000 /* CCSRBAR Default */ 85 #define CONFIG_SYS_CCSRBAR 0xffe00000 /* relocated CCSRBAR */ 86 #define CONFIG_SYS_CCSRBAR_PHYS CONFIG_SYS_CCSRBAR /* physical addr of CCSRBAR */ 87 #define CONFIG_SYS_IMMR CONFIG_SYS_CCSRBAR /* PQII uses CONFIG_SYS_IMMR */ 88 89 #define CONFIG_SYS_PCI1_ADDR (CONFIG_SYS_CCSRBAR+0x8000) 90 #define CONFIG_SYS_PCIE1_ADDR (CONFIG_SYS_CCSRBAR+0xa000) 91 #define CONFIG_SYS_PCIE2_ADDR (CONFIG_SYS_CCSRBAR+0x9000) 92 #define CONFIG_SYS_PCIE3_ADDR (CONFIG_SYS_CCSRBAR+0xb000) 93 94 /* DDR Setup */ 95 #define CONFIG_FSL_DDR2 96 #undef CONFIG_FSL_DDR_INTERACTIVE 97 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ 98 #define CONFIG_DDR_SPD 99 #undef CONFIG_DDR_DLL 100 101 #undef CONFIG_ECC_INIT_VIA_DDRCONTROLLER /* DDR controller or DMA? */ 102 #define CONFIG_MEM_INIT_VALUE 0xDeadBeef 103 104 #define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 105 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE 106 107 #define CONFIG_NUM_DDR_CONTROLLERS 1 108 #define CONFIG_DIMM_SLOTS_PER_CTLR 1 109 #define CONFIG_CHIP_SELECTS_PER_CTRL 2 110 111 /* I2C addresses of SPD EEPROMs */ 112 #define SPD_EEPROM_ADDRESS 0x51 /* CTLR 0 DIMM 0 */ 113 #define CONFIG_SYS_SPD_BUS_NUM 1 114 115 /* These are used when DDR doesn't use SPD. */ 116 #define CONFIG_SYS_SDRAM_SIZE 256 /* DDR is 256MB */ 117 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001F 118 #define CONFIG_SYS_DDR_CS0_CONFIG 0x80010102 /* Enable, no interleaving */ 119 #define CONFIG_SYS_DDR_TIMING_3 0x00000000 120 #define CONFIG_SYS_DDR_TIMING_0 0x00260802 121 #define CONFIG_SYS_DDR_TIMING_1 0x3935d322 122 #define CONFIG_SYS_DDR_TIMING_2 0x14904cc8 123 #define CONFIG_SYS_DDR_MODE_1 0x00480432 124 #define CONFIG_SYS_DDR_MODE_2 0x00000000 125 #define CONFIG_SYS_DDR_INTERVAL 0x06180100 126 #define CONFIG_SYS_DDR_DATA_INIT 0xdeadbeef 127 #define CONFIG_SYS_DDR_CLK_CTRL 0x03800000 128 #define CONFIG_SYS_DDR_OCD_CTRL 0x00000000 129 #define CONFIG_SYS_DDR_OCD_STATUS 0x00000000 130 #define CONFIG_SYS_DDR_CONTROL 0xC3008000 /* Type = DDR2 */ 131 #define CONFIG_SYS_DDR_CONTROL2 0x04400010 132 133 #define CONFIG_SYS_DDR_ERR_INT_EN 0x0000000d 134 #define CONFIG_SYS_DDR_ERR_DIS 0x00000000 135 #define CONFIG_SYS_DDR_SBE 0x00010000 136 137 /* Make sure required options are set */ 138 #ifndef CONFIG_SPD_EEPROM 139 #error ("CONFIG_SPD_EEPROM is required") 140 #endif 141 142 #undef CONFIG_CLOCKS_IN_MHZ 143 144 145 /* 146 * Memory map -- xxx -this is wrong, needs updating 147 * 148 * 0x0000_0000 0x7fff_ffff DDR 2G Cacheable 149 * 0x8000_0000 0xbfff_ffff PCI Express Mem 1G non-cacheable 150 * 0xc000_0000 0xdfff_ffff PCI 512M non-cacheable 151 * 0xe100_0000 0xe3ff_ffff PCI IO range 4M non-cacheable 152 * 153 * Localbus cacheable (TBD) 154 * 0xXXXX_XXXX 0xXXXX_XXXX SRAM YZ M Cacheable 155 * 156 * Localbus non-cacheable 157 * 0xe000_0000 0xe80f_ffff Promjet/free 128M non-cacheable 158 * 0xe800_0000 0xefff_ffff FLASH 128M non-cacheable 159 * 0xffdf_0000 0xffdf_7fff PIXIS 32K non-cacheable TLB0 160 * 0xffd0_0000 0xffd0_3fff L1 for stack 16K Cacheable TLB0 161 * 0xffe0_0000 0xffef_ffff CCSR 1M non-cacheable 162 */ 163 164 /* 165 * Local Bus Definitions 166 */ 167 #define CONFIG_SYS_FLASH_BASE 0xe0000000 /* start of FLASH 128M */ 168 169 #define CONFIG_SYS_BR0_PRELIM 0xe8001001 170 #define CONFIG_SYS_OR0_PRELIM 0xf8000ff7 171 172 #define CONFIG_SYS_BR1_PRELIM 0xe0001001 173 #define CONFIG_SYS_OR1_PRELIM 0xf8000ff7 174 175 #define CONFIG_SYS_FLASH_BANKS_LIST {CONFIG_SYS_FLASH_BASE + 0x8000000, CONFIG_SYS_FLASH_BASE} 176 #define CONFIG_SYS_FLASH_QUIET_TEST 177 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 178 179 #define CONFIG_SYS_MAX_FLASH_BANKS 2 /* number of banks */ 180 #define CONFIG_SYS_MAX_FLASH_SECT 1024 /* sectors per device */ 181 #undef CONFIG_SYS_FLASH_CHECKSUM 182 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 183 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 184 185 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */ 186 187 #define CONFIG_FLASH_CFI_DRIVER 188 #define CONFIG_SYS_FLASH_CFI 189 #define CONFIG_SYS_FLASH_EMPTY_INFO 190 #define CONFIG_SYS_FLASH_AMD_CHECK_DQ7 191 192 #define CONFIG_BOARD_EARLY_INIT_R /* call board_early_init_r function */ 193 194 #define CONFIG_FSL_PIXIS 1 /* use common PIXIS code */ 195 #define PIXIS_BASE 0xffdf0000 /* PIXIS registers */ 196 197 #define CONFIG_SYS_BR3_PRELIM (PIXIS_BASE | 0x0801) /* port size 8bit */ 198 #define CONFIG_SYS_OR3_PRELIM 0xffffeff7 /* 32KB but only 4k mapped */ 199 200 #define PIXIS_ID 0x0 /* Board ID at offset 0 */ 201 #define PIXIS_VER 0x1 /* Board version at offset 1 */ 202 #define PIXIS_PVER 0x2 /* PIXIS FPGA version at offset 2 */ 203 #define PIXIS_CSR 0x3 /* PIXIS General control/status register */ 204 #define PIXIS_RST 0x4 /* PIXIS Reset Control register */ 205 #define PIXIS_PWR 0x5 /* PIXIS Power status register */ 206 #define PIXIS_AUX 0x6 /* Auxiliary 1 register */ 207 #define PIXIS_SPD 0x7 /* Register for SYSCLK speed */ 208 #define PIXIS_AUX2 0x8 /* Auxiliary 2 register */ 209 #define PIXIS_VCTL 0x10 /* VELA Control Register */ 210 #define PIXIS_VSTAT 0x11 /* VELA Status Register */ 211 #define PIXIS_VCFGEN0 0x12 /* VELA Config Enable 0 */ 212 #define PIXIS_VCFGEN1 0x13 /* VELA Config Enable 1 */ 213 #define PIXIS_VCORE0 0x14 /* VELA VCORE0 Register */ 214 #define PIXIS_VBOOT 0x16 /* VELA VBOOT Register */ 215 #define PIXIS_VSPEED0 0x17 /* VELA VSpeed 0 */ 216 #define PIXIS_VSPEED1 0x18 /* VELA VSpeed 1 */ 217 #define PIXIS_VSPEED2 0x19 /* VELA VSpeed 2 */ 218 #define PIXIS_VSYSCLK0 0x1A /* VELA SYSCLK0 Register */ 219 #define PIXIS_VSYSCLK1 0x1B /* VELA SYSCLK1 Register */ 220 #define PIXIS_VSYSCLK2 0x1C /* VELA SYSCLK2 Register */ 221 #define PIXIS_VDDRCLK0 0x1D /* VELA DDRCLK0 Register */ 222 #define PIXIS_VDDRCLK1 0x1E /* VELA DDRCLK1 Register */ 223 #define PIXIS_VDDRCLK2 0x1F /* VELA DDRCLK2 Register */ 224 #define PIXIS_VWATCH 0x24 /* Watchdog Register */ 225 #define PIXIS_LED 0x25 /* LED Register */ 226 227 /* old pixis referenced names */ 228 #define PIXIS_VCLKH 0x19 /* VELA VCLKH register */ 229 #define PIXIS_VCLKL 0x1A /* VELA VCLKL register */ 230 #define CONFIG_SYS_PIXIS_VBOOT_MASK 0xc0 231 232 /* define to use L1 as initial stack */ 233 #define CONFIG_L1_INIT_RAM 234 #define CONFIG_SYS_INIT_RAM_LOCK 1 235 #define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ 236 #define CONFIG_SYS_INIT_RAM_END 0x00004000 /* End of used area in RAM */ 237 238 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* num bytes initial data */ 239 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) 240 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 241 242 #define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 243 #define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserved for malloc */ 244 245 /* Serial Port - controlled on board with jumper J8 246 * open - index 2 247 * shorted - index 1 248 */ 249 #define CONFIG_CONS_INDEX 1 250 #undef CONFIG_SERIAL_SOFTWARE_FIFO 251 #define CONFIG_SYS_NS16550 252 #define CONFIG_SYS_NS16550_SERIAL 253 #define CONFIG_SYS_NS16550_REG_SIZE 1 254 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 255 256 #define CONFIG_SYS_BAUDRATE_TABLE \ 257 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200} 258 259 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500) 260 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600) 261 262 /* Use the HUSH parser */ 263 #define CONFIG_SYS_HUSH_PARSER 264 #ifdef CONFIG_SYS_HUSH_PARSER 265 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 266 #endif 267 268 /* 269 * Pass open firmware flat tree 270 */ 271 #define CONFIG_OF_LIBFDT 1 272 #define CONFIG_OF_BOARD_SETUP 1 273 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 274 275 #define CONFIG_SYS_64BIT_STRTOUL 1 276 #define CONFIG_SYS_64BIT_VSPRINTF 1 277 278 279 /* 280 * I2C 281 */ 282 #define CONFIG_FSL_I2C /* Use FSL common I2C driver */ 283 #define CONFIG_HARD_I2C /* I2C with hardware support */ 284 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 285 #define CONFIG_I2C_MULTI_BUS 286 #define CONFIG_I2C_CMD_TREE 287 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 288 #define CONFIG_SYS_I2C_SLAVE 0x7F 289 #define CONFIG_SYS_I2C_NOPROBES {{0, 0x29}} /* Don't probe these addrs */ 290 #define CONFIG_SYS_I2C_OFFSET 0x3000 291 #define CONFIG_SYS_I2C2_OFFSET 0x3100 292 293 /* 294 * I2C2 EEPROM 295 */ 296 #define CONFIG_ID_EEPROM 297 #ifdef CONFIG_ID_EEPROM 298 #define CONFIG_SYS_I2C_EEPROM_NXID 299 #endif 300 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x57 301 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 302 #define CONFIG_SYS_EEPROM_BUS_NUM 1 303 304 /* 305 * General PCI 306 * Memory space is mapped 1-1, but I/O space must start from 0. 307 */ 308 309 /* PCI view of System Memory */ 310 #define CONFIG_SYS_PCI_MEMORY_BUS 0x00000000 311 #define CONFIG_SYS_PCI_MEMORY_PHYS 0x00000000 312 #define CONFIG_SYS_PCI_MEMORY_SIZE 0x80000000 313 314 #define CONFIG_SYS_PCI1_MEM_BASE 0x80000000 315 #define CONFIG_SYS_PCI1_MEM_PHYS CONFIG_SYS_PCI1_MEM_BASE 316 #define CONFIG_SYS_PCI1_MEM_SIZE 0x10000000 /* 256M */ 317 #define CONFIG_SYS_PCI1_IO_BASE 0x00000000 318 #define CONFIG_SYS_PCI1_IO_PHYS 0xffc00000 319 #define CONFIG_SYS_PCI1_IO_SIZE 0x00010000 /* 64k */ 320 321 /* controller 1, Slot 1, tgtid 1, Base address a000 */ 322 #define CONFIG_SYS_PCIE1_MEM_BASE 0x90000000 323 #define CONFIG_SYS_PCIE1_MEM_PHYS CONFIG_SYS_PCIE1_MEM_BASE 324 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x08000000 /* 128M */ 325 #define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 326 #define CONFIG_SYS_PCIE1_IO_PHYS 0xffc10000 327 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ 328 329 /* controller 2, Slot 2, tgtid 2, Base address 9000 */ 330 #define CONFIG_SYS_PCIE2_MEM_BASE 0x98000000 331 #define CONFIG_SYS_PCIE2_MEM_PHYS CONFIG_SYS_PCIE2_MEM_BASE 332 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x08000000 /* 128M */ 333 #define CONFIG_SYS_PCIE2_IO_BASE 0x00000000 334 #define CONFIG_SYS_PCIE2_IO_PHYS 0xffc20000 335 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00010000 /* 64k */ 336 337 /* controller 3, direct to uli, tgtid 3, Base address 8000 */ 338 #define CONFIG_SYS_PCIE3_MEM_BASE 0xa0000000 339 #define CONFIG_SYS_PCIE3_MEM_PHYS CONFIG_SYS_PCIE3_MEM_BASE 340 #define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ 341 #define CONFIG_SYS_PCIE3_IO_BASE 0x00000000 342 #define CONFIG_SYS_PCIE3_IO_PHYS 0xffc30000 343 #define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ 344 345 #if defined(CONFIG_PCI) 346 347 #define CONFIG_NET_MULTI 348 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 349 350 /*PCIE video card used*/ 351 #define VIDEO_IO_OFFSET CONFIG_SYS_PCIE3_IO_PHYS 352 353 /*PCI video card used*/ 354 /*#define VIDEO_IO_OFFSET CONFIG_SYS_PCI1_IO_PHYS*/ 355 356 /* video */ 357 #define CONFIG_VIDEO 358 359 #if defined(CONFIG_VIDEO) 360 #define CONFIG_BIOSEMU 361 #define CONFIG_CFB_CONSOLE 362 #define CONFIG_VIDEO_SW_CURSOR 363 #define CONFIG_VGA_AS_SINGLE_DEVICE 364 #define CONFIG_ATI_RADEON_FB 365 #define CONFIG_VIDEO_LOGO 366 /*#define CONFIG_CONSOLE_CURSOR*/ 367 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_PCIE3_IO_PHYS 368 #endif 369 370 #undef CONFIG_EEPRO100 371 #undef CONFIG_TULIP 372 #undef CONFIG_RTL8139 373 374 #ifdef CONFIG_RTL8139 375 /* This macro is used by RTL8139 but not defined in PPC architecture */ 376 #define KSEG1ADDR(x) ({u32 _x=le32_to_cpu(*(u32 *)(x)); (&_x);}) 377 #define _IO_BASE 0x00000000 378 #endif 379 380 #ifndef CONFIG_PCI_PNP 381 #define PCI_ENET0_IOADDR CONFIG_SYS_PCI1_IO_BASE 382 #define PCI_ENET0_MEMADDR CONFIG_SYS_PCI1_IO_BASE 383 #define PCI_IDSEL_NUMBER 0x11 /* IDSEL = AD11 */ 384 #endif 385 386 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 387 388 #endif /* CONFIG_PCI */ 389 390 /* SATA */ 391 #define CONFIG_LIBATA 392 #define CONFIG_FSL_SATA 393 394 #define CONFIG_SYS_SATA_MAX_DEVICE 2 395 #define CONFIG_SATA1 396 #define CONFIG_SYS_SATA1 CONFIG_SYS_MPC85xx_SATA1_ADDR 397 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 398 #define CONFIG_SATA2 399 #define CONFIG_SYS_SATA2 CONFIG_SYS_MPC85xx_SATA2_ADDR 400 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 401 402 #ifdef CONFIG_FSL_SATA 403 #define CONFIG_LBA48 404 #define CONFIG_CMD_SATA 405 #define CONFIG_DOS_PARTITION 406 #define CONFIG_CMD_EXT2 407 #endif 408 409 #if defined(CONFIG_TSEC_ENET) 410 411 #ifndef CONFIG_NET_MULTI 412 #define CONFIG_NET_MULTI 1 413 #endif 414 415 #define CONFIG_MII 1 /* MII PHY management */ 416 #define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */ 417 #define CONFIG_TSEC1 1 418 #define CONFIG_TSEC1_NAME "eTSEC1" 419 #define CONFIG_TSEC3 1 420 #define CONFIG_TSEC3_NAME "eTSEC3" 421 422 #define CONFIG_FSL_SGMII_RISER 1 423 #define SGMII_RISER_PHY_OFFSET 0x1c 424 425 #define TSEC1_PHY_ADDR 1 /* TSEC1 -> PHY1 */ 426 #define TSEC3_PHY_ADDR 0 /* TSEC3 -> PHY0 */ 427 428 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 429 #define TSEC3_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 430 431 #define TSEC1_PHYIDX 0 432 #define TSEC3_PHYIDX 0 433 434 #define CONFIG_ETHPRIME "eTSEC1" 435 436 #define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */ 437 438 #endif /* CONFIG_TSEC_ENET */ 439 440 /* 441 * Environment 442 */ 443 #define CONFIG_ENV_IS_IN_FLASH 1 444 #if CONFIG_SYS_MONITOR_BASE > 0xfff80000 445 #define CONFIG_ENV_ADDR 0xfff80000 446 #else 447 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x60000) 448 #endif 449 #define CONFIG_ENV_SIZE 0x2000 450 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K (one sector) */ 451 452 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 453 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 454 455 /* 456 * Command line configuration. 457 */ 458 #include <config_cmd_default.h> 459 460 #define CONFIG_CMD_IRQ 461 #define CONFIG_CMD_PING 462 #define CONFIG_CMD_I2C 463 #define CONFIG_CMD_MII 464 #define CONFIG_CMD_ELF 465 #define CONFIG_CMD_IRQ 466 #define CONFIG_CMD_SETEXPR 467 468 #if defined(CONFIG_PCI) 469 #define CONFIG_CMD_PCI 470 #define CONFIG_CMD_BEDBUG 471 #define CONFIG_CMD_NET 472 #endif 473 474 #undef CONFIG_WATCHDOG /* watchdog disabled */ 475 476 /* 477 * Miscellaneous configurable options 478 */ 479 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 480 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 481 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 482 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 483 #if defined(CONFIG_CMD_KGDB) 484 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 485 #else 486 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 487 #endif 488 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 489 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 490 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 491 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 492 493 /* 494 * For booting Linux, the board info and command line data 495 * have to be in the first 8 MB of memory, since this is 496 * the maximum mapped by the Linux kernel during initialization. 497 */ 498 #define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ 499 500 /* 501 * Internal Definitions 502 * 503 * Boot Flags 504 */ 505 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ 506 #define BOOTFLAG_WARM 0x02 /* Software reboot */ 507 508 #if defined(CONFIG_CMD_KGDB) 509 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 510 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 511 #endif 512 513 /* 514 * Environment Configuration 515 */ 516 517 /* The mac addresses for all ethernet interface */ 518 #if defined(CONFIG_TSEC_ENET) 519 #define CONFIG_HAS_ETH0 520 #define CONFIG_ETHADDR 00:E0:0C:02:00:FD 521 #define CONFIG_HAS_ETH1 522 #define CONFIG_ETH1ADDR 00:E0:0C:02:01:FD 523 #define CONFIG_HAS_ETH2 524 #define CONFIG_ETH2ADDR 00:E0:0C:02:02:FD 525 #define CONFIG_HAS_ETH3 526 #define CONFIG_ETH3ADDR 00:E0:0C:02:03:FD 527 #endif 528 529 #define CONFIG_IPADDR 192.168.1.254 530 531 #define CONFIG_HOSTNAME unknown 532 #define CONFIG_ROOTPATH /opt/nfsroot 533 #define CONFIG_BOOTFILE uImage 534 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 535 536 #define CONFIG_SERVERIP 192.168.1.1 537 #define CONFIG_GATEWAYIP 192.168.1.1 538 #define CONFIG_NETMASK 255.255.255.0 539 540 /* default location for tftp and bootm */ 541 #define CONFIG_LOADADDR 1000000 542 543 #define CONFIG_BOOTDELAY 10 /* -1 disables auto-boot */ 544 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 545 546 #define CONFIG_BAUDRATE 115200 547 548 #define CONFIG_EXTRA_ENV_SETTINGS \ 549 "netdev=eth0\0" \ 550 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 551 "tftpflash=tftpboot $loadaddr $uboot; " \ 552 "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ 553 "erase " MK_STR(TEXT_BASE) " +$filesize; " \ 554 "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ 555 "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ 556 "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ 557 "consoledev=ttyS0\0" \ 558 "ramdiskaddr=2000000\0" \ 559 "ramdiskfile=8536ds/ramdisk.uboot\0" \ 560 "fdtaddr=c00000\0" \ 561 "fdtfile=8536ds/mpc8536ds.dtb\0" \ 562 "bdev=sda3\0" 563 564 #define CONFIG_HDBOOT \ 565 "setenv bootargs root=/dev/$bdev rw " \ 566 "console=$consoledev,$baudrate $othbootargs;" \ 567 "tftp $loadaddr $bootfile;" \ 568 "tftp $fdtaddr $fdtfile;" \ 569 "bootm $loadaddr - $fdtaddr" 570 571 #define CONFIG_NFSBOOTCOMMAND \ 572 "setenv bootargs root=/dev/nfs rw " \ 573 "nfsroot=$serverip:$rootpath " \ 574 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 575 "console=$consoledev,$baudrate $othbootargs;" \ 576 "tftp $loadaddr $bootfile;" \ 577 "tftp $fdtaddr $fdtfile;" \ 578 "bootm $loadaddr - $fdtaddr" 579 580 #define CONFIG_RAMBOOTCOMMAND \ 581 "setenv bootargs root=/dev/ram rw " \ 582 "console=$consoledev,$baudrate $othbootargs;" \ 583 "tftp $ramdiskaddr $ramdiskfile;" \ 584 "tftp $loadaddr $bootfile;" \ 585 "tftp $fdtaddr $fdtfile;" \ 586 "bootm $loadaddr $ramdiskaddr $fdtaddr" 587 588 #define CONFIG_BOOTCOMMAND CONFIG_HDBOOT 589 590 #endif /* __CONFIG_H */ 591