1 /* 2 * Copyright (C) 2007 Freescale Semiconductor, Inc. 3 * Dave Liu <daveliu@freescale.com> 4 * 5 * This program is free software; you can redistribute it and/or 6 * modify it under the terms of the GNU General Public License as 7 * published by the Free Software Foundation; either version 2 of 8 * the License, or (at your option) any later version. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software 17 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 18 * MA 02111-1307 USA 19 */ 20 21 #ifndef __CONFIG_H 22 #define __CONFIG_H 23 24 /* 25 * High Level Configuration Options 26 */ 27 #define CONFIG_E300 1 /* E300 family */ 28 #define CONFIG_MPC83xx 1 /* MPC83xx family */ 29 #define CONFIG_MPC837x 1 /* MPC837x CPU specific */ 30 #define CONFIG_MPC837XEMDS 1 /* MPC837XEMDS board specific */ 31 32 #define CONFIG_SYS_TEXT_BASE 0xFE000000 33 34 /* 35 * System Clock Setup 36 */ 37 #ifdef CONFIG_PCISLAVE 38 #define CONFIG_83XX_PCICLK 66000000 /* in HZ */ 39 #else 40 #define CONFIG_83XX_CLKIN 66000000 /* in Hz */ 41 #endif 42 43 #ifndef CONFIG_SYS_CLK_FREQ 44 #define CONFIG_SYS_CLK_FREQ 66000000 45 #endif 46 47 /* 48 * Hardware Reset Configuration Word 49 * if CLKIN is 66MHz, then 50 * CSB = 396MHz, CORE = 594MHz, DDRC = 396MHz, LBC = 396MHz 51 */ 52 #define CONFIG_SYS_HRCW_LOW (\ 53 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ 54 HRCWL_DDR_TO_SCB_CLK_1X1 |\ 55 HRCWL_SVCOD_DIV_2 |\ 56 HRCWL_CSB_TO_CLKIN_6X1 |\ 57 HRCWL_CORE_TO_CSB_1_5X1) 58 59 #ifdef CONFIG_PCISLAVE 60 #define CONFIG_SYS_HRCW_HIGH (\ 61 HRCWH_PCI_AGENT |\ 62 HRCWH_PCI1_ARBITER_DISABLE |\ 63 HRCWH_CORE_ENABLE |\ 64 HRCWH_FROM_0XFFF00100 |\ 65 HRCWH_BOOTSEQ_DISABLE |\ 66 HRCWH_SW_WATCHDOG_DISABLE |\ 67 HRCWH_ROM_LOC_LOCAL_16BIT |\ 68 HRCWH_RL_EXT_LEGACY |\ 69 HRCWH_TSEC1M_IN_RGMII |\ 70 HRCWH_TSEC2M_IN_RGMII |\ 71 HRCWH_BIG_ENDIAN |\ 72 HRCWH_LDP_CLEAR) 73 #else 74 #define CONFIG_SYS_HRCW_HIGH (\ 75 HRCWH_PCI_HOST |\ 76 HRCWH_PCI1_ARBITER_ENABLE |\ 77 HRCWH_CORE_ENABLE |\ 78 HRCWH_FROM_0X00000100 |\ 79 HRCWH_BOOTSEQ_DISABLE |\ 80 HRCWH_SW_WATCHDOG_DISABLE |\ 81 HRCWH_ROM_LOC_LOCAL_16BIT |\ 82 HRCWH_RL_EXT_LEGACY |\ 83 HRCWH_TSEC1M_IN_RGMII |\ 84 HRCWH_TSEC2M_IN_RGMII |\ 85 HRCWH_BIG_ENDIAN |\ 86 HRCWH_LDP_CLEAR) 87 #endif 88 89 /* Arbiter Configuration Register */ 90 #define CONFIG_SYS_ACR_PIPE_DEP 3 /* Arbiter pipeline depth is 4 */ 91 #define CONFIG_SYS_ACR_RPTCNT 3 /* Arbiter repeat count is 4 */ 92 93 /* System Priority Control Register */ 94 #define CONFIG_SYS_SPCR_TSECEP 3 /* eTSEC1/2 emergency has highest priority */ 95 96 /* 97 * IP blocks clock configuration 98 */ 99 #define CONFIG_SYS_SCCR_TSEC1CM 1 /* CSB:eTSEC1 = 1:1 */ 100 #define CONFIG_SYS_SCCR_TSEC2CM 1 /* CSB:eTSEC2 = 1:1 */ 101 #define CONFIG_SYS_SCCR_SATACM SCCR_SATACM_2 /* CSB:SATA[0:3] = 2:1 */ 102 103 /* 104 * System IO Config 105 */ 106 #define CONFIG_SYS_SICRH 0x00000000 107 #define CONFIG_SYS_SICRL 0x00000000 108 109 /* 110 * Output Buffer Impedance 111 */ 112 #define CONFIG_SYS_OBIR 0x31100000 113 114 #define CONFIG_BOARD_EARLY_INIT_F /* call board_pre_init */ 115 #define CONFIG_BOARD_EARLY_INIT_R 116 #define CONFIG_HWCONFIG 117 118 /* 119 * IMMR new address 120 */ 121 #define CONFIG_SYS_IMMR 0xE0000000 122 123 /* 124 * DDR Setup 125 */ 126 #define CONFIG_SYS_DDR_BASE 0x00000000 /* DDR is system memory */ 127 #define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_BASE 128 #define CONFIG_SYS_DDR_SDRAM_BASE CONFIG_SYS_DDR_BASE 129 #define CONFIG_SYS_DDR_SDRAM_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05 130 #define CONFIG_SYS_83XX_DDR_USES_CS0 131 #define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_DHC_EN \ 132 | DDRCDR_ODT \ 133 | DDRCDR_Q_DRN) 134 /* 0x80080001 */ /* ODT 150ohm on SoC */ 135 136 #undef CONFIG_DDR_ECC /* support DDR ECC function */ 137 #undef CONFIG_DDR_ECC_CMD /* Use DDR ECC user commands */ 138 139 #define CONFIG_SPD_EEPROM /* Use SPD EEPROM for DDR setup */ 140 #define CONFIG_NEVER_ASSERT_ODT_TO_CPU /* Never assert ODT to internal IOs */ 141 142 #if defined(CONFIG_SPD_EEPROM) 143 #define SPD_EEPROM_ADDRESS 0x51 /* I2C address of DDR SODIMM SPD */ 144 #else 145 /* 146 * Manually set up DDR parameters 147 * WHITE ELECTRONIC DESIGNS - W3HG64M72EEU403PD4 SO-DIMM 148 * consist of nine chips from SAMSUNG K4T51083QE-ZC(L)D5 149 */ 150 #define CONFIG_SYS_DDR_SIZE 512 /* MB */ 151 #define CONFIG_SYS_DDR_CS0_BNDS 0x0000001f 152 #define CONFIG_SYS_DDR_CS0_CONFIG (CSCONFIG_EN \ 153 | CSCONFIG_ODT_RD_NEVER /* ODT_RD to none */ \ 154 | CSCONFIG_ODT_WR_ONLY_CURRENT /* ODT_WR to CSn */ \ 155 | CSCONFIG_ROW_BIT_14 \ 156 | CSCONFIG_COL_BIT_10) 157 /* 0x80010202 */ 158 #define CONFIG_SYS_DDR_TIMING_3 0x00000000 159 #define CONFIG_SYS_DDR_TIMING_0 ((0 << TIMING_CFG0_RWT_SHIFT) \ 160 | (0 << TIMING_CFG0_WRT_SHIFT) \ 161 | (0 << TIMING_CFG0_RRT_SHIFT) \ 162 | (0 << TIMING_CFG0_WWT_SHIFT) \ 163 | (6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) \ 164 | (2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) \ 165 | (8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) \ 166 | (2 << TIMING_CFG0_MRS_CYC_SHIFT)) 167 /* 0x00620802 */ 168 #define CONFIG_SYS_DDR_TIMING_1 ((3 << TIMING_CFG1_PRETOACT_SHIFT) \ 169 | (9 << TIMING_CFG1_ACTTOPRE_SHIFT) \ 170 | (3 << TIMING_CFG1_ACTTORW_SHIFT) \ 171 | (5 << TIMING_CFG1_CASLAT_SHIFT) \ 172 | (13 << TIMING_CFG1_REFREC_SHIFT) \ 173 | (3 << TIMING_CFG1_WRREC_SHIFT) \ 174 | (2 << TIMING_CFG1_ACTTOACT_SHIFT) \ 175 | (2 << TIMING_CFG1_WRTORD_SHIFT)) 176 /* 0x3935d322 */ 177 #define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) \ 178 | (6 << TIMING_CFG2_CPO_SHIFT) \ 179 | (2 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) \ 180 | (4 << TIMING_CFG2_RD_TO_PRE_SHIFT) \ 181 | (2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) \ 182 | (3 << TIMING_CFG2_CKE_PLS_SHIFT) \ 183 | (8 << TIMING_CFG2_FOUR_ACT_SHIFT)) 184 /* 0x131088c8 */ 185 #define CONFIG_SYS_DDR_INTERVAL ((0x03E0 << SDRAM_INTERVAL_REFINT_SHIFT) \ 186 | (0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT)) 187 /* 0x03E00100 */ 188 #define CONFIG_SYS_DDR_SDRAM_CFG 0x43000000 189 #define CONFIG_SYS_DDR_SDRAM_CFG2 0x00001000 /* 1 posted refresh */ 190 #define CONFIG_SYS_DDR_MODE ((0x0448 << SDRAM_MODE_ESD_SHIFT) \ 191 | (0x1432 << SDRAM_MODE_SD_SHIFT)) 192 /* ODT 150ohm CL=3, AL=1 on SDRAM */ 193 #define CONFIG_SYS_DDR_MODE2 0x00000000 194 #endif 195 196 /* 197 * Memory test 198 */ 199 #undef CONFIG_SYS_DRAM_TEST /* memory test, takes time */ 200 #define CONFIG_SYS_MEMTEST_START 0x00040000 /* memtest region */ 201 #define CONFIG_SYS_MEMTEST_END 0x00140000 202 203 /* 204 * The reserved memory 205 */ 206 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */ 207 208 #if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) 209 #define CONFIG_SYS_RAMBOOT 210 #else 211 #undef CONFIG_SYS_RAMBOOT 212 #endif 213 214 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */ 215 #define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */ 216 #define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */ 217 218 /* 219 * Initial RAM Base Address Setup 220 */ 221 #define CONFIG_SYS_INIT_RAM_LOCK 1 222 #define CONFIG_SYS_INIT_RAM_ADDR 0xE6000000 /* Initial RAM address */ 223 #define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* Size of used area in RAM */ 224 #define CONFIG_SYS_GBL_DATA_OFFSET \ 225 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 226 227 /* 228 * Local Bus Configuration & Clock Setup 229 */ 230 #define CONFIG_SYS_LCRR_DBYP LCRR_DBYP 231 #define CONFIG_SYS_LCRR_CLKDIV LCRR_CLKDIV_8 232 #define CONFIG_SYS_LBC_LBCR 0x00000000 233 #define CONFIG_FSL_ELBC 1 234 235 /* 236 * FLASH on the Local Bus 237 */ 238 #define CONFIG_SYS_FLASH_CFI /* use the Common Flash Interface */ 239 #define CONFIG_FLASH_CFI_DRIVER /* use the CFI driver */ 240 #define CONFIG_SYS_FLASH_BASE 0xFE000000 /* FLASH base address */ 241 #define CONFIG_SYS_FLASH_SIZE 32 /* max FLASH size is 32M */ 242 #define CONFIG_SYS_FLASH_PROTECTION 1 /* Use h/w Flash protection. */ 243 244 /* Window base at flash base */ 245 #define CONFIG_SYS_LBLAWBAR0_PRELIM CONFIG_SYS_FLASH_BASE 246 #define CONFIG_SYS_LBLAWAR0_PRELIM 0x80000018 /* 32MB window size */ 247 248 #define CONFIG_SYS_BR0_PRELIM (CONFIG_SYS_FLASH_BASE \ 249 | (2 << BR_PS_SHIFT) /* 16 bit port */ \ 250 | BR_V) /* valid */ 251 #define CONFIG_SYS_OR0_PRELIM ((~(CONFIG_SYS_FLASH_SIZE - 1) << 20) \ 252 | OR_UPM_XAM \ 253 | OR_GPCM_CSNT \ 254 | OR_GPCM_ACS_DIV2 \ 255 | OR_GPCM_XACS \ 256 | OR_GPCM_SCY_15 \ 257 | OR_GPCM_TRLX \ 258 | OR_GPCM_EHTR \ 259 | OR_GPCM_EAD) 260 /* 0xFE000FF7 */ 261 262 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ 263 #define CONFIG_SYS_MAX_FLASH_SECT 256 /* max sectors per device */ 264 265 #undef CONFIG_SYS_FLASH_CHECKSUM 266 #define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 267 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 268 269 /* 270 * BCSR on the Local Bus 271 */ 272 #define CONFIG_SYS_BCSR 0xF8000000 273 /* Access window base at BCSR base */ 274 #define CONFIG_SYS_LBLAWBAR1_PRELIM CONFIG_SYS_BCSR 275 #define CONFIG_SYS_LBLAWAR1_PRELIM 0x8000000E /* Access window size 32K */ 276 277 /* Port size=8bit, MSEL=GPCM */ 278 #define CONFIG_SYS_BR1_PRELIM (CONFIG_SYS_BCSR | 0x00000801) 279 #define CONFIG_SYS_OR1_PRELIM 0xFFFFE9f7 /* length 32K */ 280 281 /* 282 * NAND Flash on the Local Bus 283 */ 284 #define CONFIG_CMD_NAND 1 285 #define CONFIG_MTD_NAND_VERIFY_WRITE 1 286 #define CONFIG_SYS_MAX_NAND_DEVICE 1 287 #define CONFIG_NAND_FSL_ELBC 1 288 289 #define CONFIG_SYS_NAND_BASE 0xE0600000 /* 0xE0600000 */ 290 #define CONFIG_SYS_BR3_PRELIM (CONFIG_SYS_NAND_BASE \ 291 | (2<<BR_DECC_SHIFT) /* Use HW ECC */ \ 292 | BR_PS_8 /* 8 bit port */ \ 293 | BR_MS_FCM /* MSEL = FCM */ \ 294 | BR_V) /* valid */ 295 #define CONFIG_SYS_OR3_PRELIM (0xFFFF8000 /* length 32K */ \ 296 | OR_FCM_BCTLD \ 297 | OR_FCM_CST \ 298 | OR_FCM_CHT \ 299 | OR_FCM_SCY_1 \ 300 | OR_FCM_RST \ 301 | OR_FCM_TRLX \ 302 | OR_FCM_EHTR) 303 /* 0xFFFF919E */ 304 305 #define CONFIG_SYS_LBLAWBAR3_PRELIM CONFIG_SYS_NAND_BASE 306 #define CONFIG_SYS_LBLAWAR3_PRELIM 0x8000000E /* 32KB */ 307 308 /* 309 * Serial Port 310 */ 311 #define CONFIG_CONS_INDEX 1 312 #define CONFIG_SYS_NS16550 313 #define CONFIG_SYS_NS16550_SERIAL 314 #define CONFIG_SYS_NS16550_REG_SIZE 1 315 #define CONFIG_SYS_NS16550_CLK get_bus_freq(0) 316 317 #define CONFIG_SYS_BAUDRATE_TABLE \ 318 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} 319 320 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR+0x4500) 321 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR+0x4600) 322 323 /* Use the HUSH parser */ 324 #define CONFIG_SYS_HUSH_PARSER 325 #ifdef CONFIG_SYS_HUSH_PARSER 326 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 327 #endif 328 329 /* Pass open firmware flat tree */ 330 #define CONFIG_OF_LIBFDT 1 331 #define CONFIG_OF_BOARD_SETUP 1 332 #define CONFIG_OF_STDOUT_VIA_ALIAS 1 333 334 /* I2C */ 335 #define CONFIG_HARD_I2C /* I2C with hardware support */ 336 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 337 #define CONFIG_FSL_I2C 338 #define CONFIG_SYS_I2C_SPEED 400000 /* I2C speed and slave address */ 339 #define CONFIG_SYS_I2C_SLAVE 0x7F 340 #define CONFIG_SYS_I2C_NOPROBES {0x51} /* Don't probe these addrs */ 341 #define CONFIG_SYS_I2C_OFFSET 0x3000 342 #define CONFIG_SYS_I2C2_OFFSET 0x3100 343 344 /* 345 * Config on-board RTC 346 */ 347 #define CONFIG_RTC_DS1374 /* use ds1374 rtc via i2c */ 348 #define CONFIG_SYS_I2C_RTC_ADDR 0x68 /* at address 0x68 */ 349 350 /* 351 * General PCI 352 * Addresses are mapped 1-1. 353 */ 354 #define CONFIG_SYS_PCI_MEM_BASE 0x80000000 355 #define CONFIG_SYS_PCI_MEM_PHYS CONFIG_SYS_PCI_MEM_BASE 356 #define CONFIG_SYS_PCI_MEM_SIZE 0x10000000 /* 256M */ 357 #define CONFIG_SYS_PCI_MMIO_BASE 0x90000000 358 #define CONFIG_SYS_PCI_MMIO_PHYS CONFIG_SYS_PCI_MMIO_BASE 359 #define CONFIG_SYS_PCI_MMIO_SIZE 0x10000000 /* 256M */ 360 #define CONFIG_SYS_PCI_IO_BASE 0x00000000 361 #define CONFIG_SYS_PCI_IO_PHYS 0xE0300000 362 #define CONFIG_SYS_PCI_IO_SIZE 0x100000 /* 1M */ 363 364 #define CONFIG_SYS_PCI_SLV_MEM_LOCAL CONFIG_SYS_SDRAM_BASE 365 #define CONFIG_SYS_PCI_SLV_MEM_BUS 0x00000000 366 #define CONFIG_SYS_PCI_SLV_MEM_SIZE 0x80000000 367 368 #define CONFIG_SYS_PCIE1_BASE 0xA0000000 369 #define CONFIG_SYS_PCIE1_CFG_BASE 0xA0000000 370 #define CONFIG_SYS_PCIE1_CFG_SIZE 0x08000000 371 #define CONFIG_SYS_PCIE1_MEM_BASE 0xA8000000 372 #define CONFIG_SYS_PCIE1_MEM_PHYS 0xA8000000 373 #define CONFIG_SYS_PCIE1_MEM_SIZE 0x10000000 374 #define CONFIG_SYS_PCIE1_IO_BASE 0x00000000 375 #define CONFIG_SYS_PCIE1_IO_PHYS 0xB8000000 376 #define CONFIG_SYS_PCIE1_IO_SIZE 0x00800000 377 378 #define CONFIG_SYS_PCIE2_BASE 0xC0000000 379 #define CONFIG_SYS_PCIE2_CFG_BASE 0xC0000000 380 #define CONFIG_SYS_PCIE2_CFG_SIZE 0x08000000 381 #define CONFIG_SYS_PCIE2_MEM_BASE 0xC8000000 382 #define CONFIG_SYS_PCIE2_MEM_PHYS 0xC8000000 383 #define CONFIG_SYS_PCIE2_MEM_SIZE 0x10000000 384 #define CONFIG_SYS_PCIE2_IO_BASE 0x00000000 385 #define CONFIG_SYS_PCIE2_IO_PHYS 0xD8000000 386 #define CONFIG_SYS_PCIE2_IO_SIZE 0x00800000 387 388 #ifdef CONFIG_PCI 389 #ifndef __ASSEMBLY__ 390 extern int board_pci_host_broken(void); 391 #endif 392 #define CONFIG_PCIE 393 #define CONFIG_PQ_MDS_PIB 1 /* PQ MDS Platform IO Board */ 394 395 #define CONFIG_HAS_FSL_DR_USB 1 /* fixup device tree for the DR USB */ 396 397 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 398 399 #undef CONFIG_EEPRO100 400 #undef CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 401 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957 /* Freescale */ 402 #endif /* CONFIG_PCI */ 403 404 /* 405 * TSEC 406 */ 407 #define CONFIG_TSEC_ENET /* TSEC ethernet support */ 408 #define CONFIG_SYS_TSEC1_OFFSET 0x24000 409 #define CONFIG_SYS_TSEC1 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET) 410 #define CONFIG_SYS_TSEC2_OFFSET 0x25000 411 #define CONFIG_SYS_TSEC2 (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC2_OFFSET) 412 413 /* 414 * TSEC ethernet configuration 415 */ 416 #define CONFIG_MII 1 /* MII PHY management */ 417 #define CONFIG_TSEC1 1 418 #define CONFIG_TSEC1_NAME "eTSEC0" 419 #define CONFIG_TSEC2 1 420 #define CONFIG_TSEC2_NAME "eTSEC1" 421 #define TSEC1_PHY_ADDR 2 422 #define TSEC2_PHY_ADDR 3 423 #define TSEC1_PHY_ADDR_SGMII 8 424 #define TSEC2_PHY_ADDR_SGMII 4 425 #define TSEC1_PHYIDX 0 426 #define TSEC2_PHYIDX 0 427 #define TSEC1_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 428 #define TSEC2_FLAGS (TSEC_GIGABIT | TSEC_REDUCED) 429 430 /* Options are: TSEC[0-1] */ 431 #define CONFIG_ETHPRIME "eTSEC1" 432 433 /* SERDES */ 434 #define CONFIG_FSL_SERDES 435 #define CONFIG_FSL_SERDES1 0xe3000 436 #define CONFIG_FSL_SERDES2 0xe3100 437 438 /* 439 * SATA 440 */ 441 #define CONFIG_LIBATA 442 #define CONFIG_FSL_SATA 443 444 #define CONFIG_SYS_SATA_MAX_DEVICE 2 445 #define CONFIG_SATA1 446 #define CONFIG_SYS_SATA1_OFFSET 0x18000 447 #define CONFIG_SYS_SATA1 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA1_OFFSET) 448 #define CONFIG_SYS_SATA1_FLAGS FLAGS_DMA 449 #define CONFIG_SATA2 450 #define CONFIG_SYS_SATA2_OFFSET 0x19000 451 #define CONFIG_SYS_SATA2 (CONFIG_SYS_IMMR + CONFIG_SYS_SATA2_OFFSET) 452 #define CONFIG_SYS_SATA2_FLAGS FLAGS_DMA 453 454 #ifdef CONFIG_FSL_SATA 455 #define CONFIG_LBA48 456 #define CONFIG_CMD_SATA 457 #define CONFIG_DOS_PARTITION 458 #define CONFIG_CMD_EXT2 459 #endif 460 461 /* 462 * Environment 463 */ 464 #ifndef CONFIG_SYS_RAMBOOT 465 #define CONFIG_ENV_IS_IN_FLASH 1 466 #define CONFIG_ENV_ADDR \ 467 (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) 468 #define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */ 469 #define CONFIG_ENV_SIZE 0x2000 470 #else 471 #define CONFIG_SYS_NO_FLASH 1 /* Flash is not usable now */ 472 #define CONFIG_ENV_IS_NOWHERE 1 /* Store ENV in memory only */ 473 #define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE - 0x1000) 474 #define CONFIG_ENV_SIZE 0x2000 475 #endif 476 477 #define CONFIG_LOADS_ECHO 1 /* echo on for serial download */ 478 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ 479 480 /* 481 * BOOTP options 482 */ 483 #define CONFIG_BOOTP_BOOTFILESIZE 484 #define CONFIG_BOOTP_BOOTPATH 485 #define CONFIG_BOOTP_GATEWAY 486 #define CONFIG_BOOTP_HOSTNAME 487 488 489 /* 490 * Command line configuration. 491 */ 492 #include <config_cmd_default.h> 493 494 #define CONFIG_CMD_PING 495 #define CONFIG_CMD_I2C 496 #define CONFIG_CMD_MII 497 #define CONFIG_CMD_DATE 498 499 #if defined(CONFIG_PCI) 500 #define CONFIG_CMD_PCI 501 #endif 502 503 #if defined(CONFIG_SYS_RAMBOOT) 504 #undef CONFIG_CMD_SAVEENV 505 #undef CONFIG_CMD_LOADS 506 #endif 507 508 #define CONFIG_CMDLINE_EDITING 1 /* add command line history */ 509 #define CONFIG_AUTO_COMPLETE /* add autocompletion support */ 510 511 #undef CONFIG_WATCHDOG /* watchdog disabled */ 512 513 #define CONFIG_MMC 1 514 515 #ifdef CONFIG_MMC 516 #define CONFIG_FSL_ESDHC 517 #define CONFIG_FSL_ESDHC_PIN_MUX 518 #define CONFIG_SYS_FSL_ESDHC_ADDR CONFIG_SYS_MPC83xx_ESDHC_ADDR 519 #define CONFIG_CMD_MMC 520 #define CONFIG_GENERIC_MMC 521 #define CONFIG_CMD_EXT2 522 #define CONFIG_CMD_FAT 523 #define CONFIG_DOS_PARTITION 524 #endif 525 526 /* 527 * Miscellaneous configurable options 528 */ 529 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 530 #define CONFIG_SYS_LOAD_ADDR 0x2000000 /* default load address */ 531 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 532 533 #if defined(CONFIG_CMD_KGDB) 534 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 535 #else 536 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 537 #endif 538 539 /* Print Buffer Size */ 540 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 541 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 542 /* Boot Argument Buffer Size */ 543 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 544 #define CONFIG_SYS_HZ 1000 /* decrementer freq: 1ms ticks */ 545 546 /* 547 * For booting Linux, the board info and command line data 548 * have to be in the first 256 MB of memory, since this is 549 * the maximum mapped by the Linux kernel during initialization. 550 */ 551 #define CONFIG_SYS_BOOTMAPSZ (256 << 20) /* Initial Memory map for Linux */ 552 553 /* 554 * Core HID Setup 555 */ 556 #define CONFIG_SYS_HID0_INIT 0x000000000 557 #define CONFIG_SYS_HID0_FINAL (HID0_ENABLE_MACHINE_CHECK | \ 558 HID0_ENABLE_INSTRUCTION_CACHE) 559 #define CONFIG_SYS_HID2 HID2_HBE 560 561 /* 562 * MMU Setup 563 */ 564 #define CONFIG_HIGH_BATS 1 /* High BATs supported */ 565 566 /* DDR: cache cacheable */ 567 #define CONFIG_SYS_SDRAM_LOWER CONFIG_SYS_SDRAM_BASE 568 #define CONFIG_SYS_SDRAM_UPPER (CONFIG_SYS_SDRAM_BASE + 0x10000000) 569 570 #define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_LOWER \ 571 | BATL_PP_RW \ 572 | BATL_MEMCOHERENCE) 573 #define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_LOWER \ 574 | BATU_BL_256M \ 575 | BATU_VS \ 576 | BATU_VP) 577 #define CONFIG_SYS_DBAT0L CONFIG_SYS_IBAT0L 578 #define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U 579 580 #define CONFIG_SYS_IBAT1L (CONFIG_SYS_SDRAM_UPPER \ 581 | BATL_PP_RW \ 582 | BATL_MEMCOHERENCE) 583 #define CONFIG_SYS_IBAT1U (CONFIG_SYS_SDRAM_UPPER \ 584 | BATU_BL_256M \ 585 | BATU_VS \ 586 | BATU_VP) 587 #define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L 588 #define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U 589 590 /* IMMRBAR, PCI IO and NAND: cache-inhibit and guarded */ 591 #define CONFIG_SYS_IBAT2L (CONFIG_SYS_IMMR \ 592 | BATL_PP_RW \ 593 | BATL_CACHEINHIBIT \ 594 | BATL_GUARDEDSTORAGE) 595 #define CONFIG_SYS_IBAT2U (CONFIG_SYS_IMMR \ 596 | BATU_BL_8M \ 597 | BATU_VS \ 598 | BATU_VP) 599 #define CONFIG_SYS_DBAT2L CONFIG_SYS_IBAT2L 600 #define CONFIG_SYS_DBAT2U CONFIG_SYS_IBAT2U 601 602 /* BCSR: cache-inhibit and guarded */ 603 #define CONFIG_SYS_IBAT3L (CONFIG_SYS_BCSR \ 604 | BATL_PP_RW \ 605 | BATL_CACHEINHIBIT \ 606 | BATL_GUARDEDSTORAGE) 607 #define CONFIG_SYS_IBAT3U (CONFIG_SYS_BCSR \ 608 | BATU_BL_128K \ 609 | BATU_VS \ 610 | BATU_VP) 611 #define CONFIG_SYS_DBAT3L CONFIG_SYS_IBAT3L 612 #define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U 613 614 /* FLASH: icache cacheable, but dcache-inhibit and guarded */ 615 #define CONFIG_SYS_IBAT4L (CONFIG_SYS_FLASH_BASE \ 616 | BATL_PP_RW \ 617 | BATL_MEMCOHERENCE) 618 #define CONFIG_SYS_IBAT4U (CONFIG_SYS_FLASH_BASE \ 619 | BATU_BL_32M \ 620 | BATU_VS \ 621 | BATU_VP) 622 #define CONFIG_SYS_DBAT4L (CONFIG_SYS_FLASH_BASE \ 623 | BATL_PP_RW \ 624 | BATL_CACHEINHIBIT \ 625 | BATL_GUARDEDSTORAGE) 626 #define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U 627 628 /* Stack in dcache: cacheable, no memory coherence */ 629 #define CONFIG_SYS_IBAT5L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW) 630 #define CONFIG_SYS_IBAT5U (CONFIG_SYS_INIT_RAM_ADDR \ 631 | BATU_BL_128K \ 632 | BATU_VS \ 633 | BATU_VP) 634 #define CONFIG_SYS_DBAT5L CONFIG_SYS_IBAT5L 635 #define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U 636 637 #ifdef CONFIG_PCI 638 /* PCI MEM space: cacheable */ 639 #define CONFIG_SYS_IBAT6L (CONFIG_SYS_PCI_MEM_PHYS \ 640 | BATL_PP_RW \ 641 | BATL_MEMCOHERENCE) 642 #define CONFIG_SYS_IBAT6U (CONFIG_SYS_PCI_MEM_PHYS \ 643 | BATU_BL_256M \ 644 | BATU_VS \ 645 | BATU_VP) 646 #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L 647 #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U 648 /* PCI MMIO space: cache-inhibit and guarded */ 649 #define CONFIG_SYS_IBAT7L (CONFIG_SYS_PCI_MMIO_PHYS \ 650 | BATL_PP_RW \ 651 | BATL_CACHEINHIBIT \ 652 | BATL_GUARDEDSTORAGE) 653 #define CONFIG_SYS_IBAT7U (CONFIG_SYS_PCI_MMIO_PHYS \ 654 | BATU_BL_256M \ 655 | BATU_VS \ 656 | BATU_VP) 657 #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L 658 #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U 659 #else 660 #define CONFIG_SYS_IBAT6L (0) 661 #define CONFIG_SYS_IBAT6U (0) 662 #define CONFIG_SYS_IBAT7L (0) 663 #define CONFIG_SYS_IBAT7U (0) 664 #define CONFIG_SYS_DBAT6L CONFIG_SYS_IBAT6L 665 #define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U 666 #define CONFIG_SYS_DBAT7L CONFIG_SYS_IBAT7L 667 #define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U 668 #endif 669 670 #if defined(CONFIG_CMD_KGDB) 671 #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ 672 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 673 #endif 674 675 /* 676 * Environment Configuration 677 */ 678 679 #define CONFIG_ENV_OVERWRITE 680 681 #if defined(CONFIG_TSEC_ENET) 682 #define CONFIG_HAS_ETH0 683 #define CONFIG_HAS_ETH1 684 #endif 685 686 #define CONFIG_BAUDRATE 115200 687 688 #define CONFIG_LOADADDR 800000 /* default location for tftp and bootm */ 689 690 #define CONFIG_BOOTDELAY 6 /* -1 disables auto-boot */ 691 #undef CONFIG_BOOTARGS /* the boot command will set bootargs */ 692 693 #define CONFIG_EXTRA_ENV_SETTINGS \ 694 "netdev=eth0\0" \ 695 "consoledev=ttyS0\0" \ 696 "ramdiskaddr=1000000\0" \ 697 "ramdiskfile=ramfs.83xx\0" \ 698 "fdtaddr=780000\0" \ 699 "fdtfile=mpc8379_mds.dtb\0" \ 700 "" 701 702 #define CONFIG_NFSBOOTCOMMAND \ 703 "setenv bootargs root=/dev/nfs rw " \ 704 "nfsroot=$serverip:$rootpath " \ 705 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:" \ 706 "$netdev:off " \ 707 "console=$consoledev,$baudrate $othbootargs;" \ 708 "tftp $loadaddr $bootfile;" \ 709 "tftp $fdtaddr $fdtfile;" \ 710 "bootm $loadaddr - $fdtaddr" 711 712 #define CONFIG_RAMBOOTCOMMAND \ 713 "setenv bootargs root=/dev/ram rw " \ 714 "console=$consoledev,$baudrate $othbootargs;" \ 715 "tftp $ramdiskaddr $ramdiskfile;" \ 716 "tftp $loadaddr $bootfile;" \ 717 "tftp $fdtaddr $fdtfile;" \ 718 "bootm $loadaddr $ramdiskaddr $fdtaddr" 719 720 721 #define CONFIG_BOOTCOMMAND CONFIG_NFSBOOTCOMMAND 722 723 #endif /* __CONFIG_H */ 724