1 /* 2 * Copyright (C) Freescale Semiconductor, Inc. 2006. All rights reserved. 3 * 4 * See file CREDITS for list of people who contributed to this 5 * project. 6 * 7 * This program is free software; you can redistribute it and/or 8 * modify it under the terms of the GNU General Public License as 9 * published by the Free Software Foundation; either version 2 of 10 * the License, or (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License 18 * along with this program; if not, write to the Free Software 19 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 20 * MA 02111-1307 USA 21 */ 22 23 /* 24 MPC8349E-mITX and MPC8349E-mITX-GP board configuration file 25 26 Memory map: 27 28 0x0000_0000-0x0FFF_FFFF DDR SDRAM (256 MB) 29 0x8000_0000-0x9FFF_FFFF PCI1 memory space (512 MB) 30 0xA000_0000-0xBFFF_FFFF PCI2 memory space (512 MB) 31 0xE000_0000-0xEFFF_FFFF IMMR (1 MB) 32 0xE200_0000-0xE2FF_FFFF PCI1 I/O space (16 MB) 33 0xE300_0000-0xE3FF_FFFF PCI2 I/O space (16 MB) 34 0xF000_0000-0xF000_FFFF Compact Flash (MPC8349E-mITX only) 35 0xF001_0000-0xF001_FFFF Local bus expansion slot 36 0xF800_0000-0xF801_FFFF Vitesse 7385 Parallel Interface (MPC8349E-mITX only) 37 0xFE00_0000-0xFE7F_FFFF First 8MB bank of Flash memory 38 0xFE80_0000-0xFEFF_FFFF Second 8MB bank of Flash memory (MPC8349E-mITX only) 39 40 I2C address list: 41 Align. Board 42 Bus Addr Part No. Description Length Location 43 ---------------------------------------------------------------- 44 I2C0 0x50 M24256-BWMN6P Board EEPROM 2 U64 45 46 I2C1 0x20 PCF8574 I2C Expander 0 U8 47 I2C1 0x21 PCF8574 I2C Expander 0 U10 48 I2C1 0x38 PCF8574A I2C Expander 0 U8 49 I2C1 0x39 PCF8574A I2C Expander 0 U10 50 I2C1 0x51 (DDR) DDR EEPROM 1 U1 51 I2C1 0x68 DS1339 RTC 1 U68 52 53 Note that a given board has *either* a pair of 8574s or a pair of 8574As. 54 */ 55 56 #ifndef __CONFIG_H 57 #define __CONFIG_H 58 59 #if (TEXT_BASE == 0xFE000000) 60 #define CFG_LOWBOOT 61 #endif 62 63 /* 64 * High Level Configuration Options 65 */ 66 #define CONFIG_MPC834X /* MPC834x family (8343, 8347, 8349) */ 67 #define CONFIG_MPC8349 /* MPC8349 specific */ 68 69 #define CFG_IMMR 0xE0000000 /* The IMMR is relocated to here */ 70 71 72 /* On-board devices */ 73 74 #ifdef CONFIG_MPC8349ITX 75 #define CONFIG_COMPACT_FLASH /* The CF card interface on the back of the board */ 76 #define CONFIG_VSC7385 /* The Vitesse 7385 5-port switch */ 77 #endif 78 79 #define CONFIG_PCI 80 #define CONFIG_RTC_DS1337 81 #define CONFIG_HARD_I2C 82 #define CONFIG_TSEC_ENET /* TSEC Ethernet support */ 83 84 /* 85 * Device configurations 86 */ 87 88 /* I2C */ 89 #ifdef CONFIG_HARD_I2C 90 91 #define CONFIG_MISC_INIT_F 92 #define CONFIG_MISC_INIT_R 93 94 #define CONFIG_FSL_I2C 95 #define CONFIG_I2C_MULTI_BUS 96 #define CONFIG_I2C_CMD_TREE 97 #define CFG_I2C_OFFSET 0x3000 98 #define CFG_I2C2_OFFSET 0x3100 99 #define CFG_SPD_BUS_NUM 1 /* The I2C bus for SPD */ 100 101 #define CFG_I2C_8574_ADDR1 0x20 /* I2C1, PCF8574 */ 102 #define CFG_I2C_8574_ADDR2 0x21 /* I2C1, PCF8574 */ 103 #define CFG_I2C_8574A_ADDR1 0x38 /* I2C1, PCF8574A */ 104 #define CFG_I2C_8574A_ADDR2 0x39 /* I2C1, PCF8574A */ 105 #define CFG_I2C_EEPROM_ADDR 0x50 /* I2C0, Board EEPROM */ 106 #define CFG_I2C_RTC_ADDR 0x68 /* I2C1, DS1339 RTC*/ 107 #define SPD_EEPROM_ADDRESS 0x51 /* I2C1, DDR */ 108 109 #define CFG_I2C_SPEED 400000 /* I2C speed and slave address */ 110 #define CFG_I2C_SLAVE 0x7F 111 112 /* Don't probe these addresses: */ 113 #define CFG_I2C_NOPROBES {{1, CFG_I2C_8574_ADDR1}, \ 114 {1, CFG_I2C_8574_ADDR2}, \ 115 {1, CFG_I2C_8574A_ADDR1}, \ 116 {1, CFG_I2C_8574A_ADDR2}} 117 /* Bit definitions for the 8574[A] I2C expander */ 118 #define I2C_8574_REVISION 0x03 /* Board revision, 00=0.0, 01=0.1, 10=1.0 */ 119 #define I2C_8574_CF 0x08 /* 1=Compact flash absent, 0=present */ 120 #define I2C_8574_MPCICLKRN 0x10 /* MiniPCI Clk Run */ 121 #define I2C_8574_PCI66 0x20 /* 0=33MHz PCI, 1=66MHz PCI */ 122 #define I2C_8574_FLASHSIDE 0x40 /* 0=Reset vector from U4, 1=from U7*/ 123 124 #undef CONFIG_SOFT_I2C 125 126 #endif 127 128 /* Compact Flash */ 129 #ifdef CONFIG_COMPACT_FLASH 130 131 #define CFG_IDE_MAXBUS 1 132 #define CFG_IDE_MAXDEVICE 1 133 134 #define CFG_ATA_IDE0_OFFSET 0x0000 135 #define CFG_ATA_BASE_ADDR CFG_CF_BASE 136 #define CFG_ATA_DATA_OFFSET 0x0000 137 #define CFG_ATA_REG_OFFSET 0 138 #define CFG_ATA_ALT_OFFSET 0x0200 139 #define CFG_ATA_STRIDE 2 140 141 #define ATA_RESET_TIME 1 /* If a CF card is not inserted, time out quickly */ 142 143 #define CONFIG_DOS_PARTITION 144 145 #endif 146 147 /* 148 * DDR Setup 149 */ 150 #define CFG_DDR_BASE 0x00000000 /* DDR is system memory*/ 151 #define CFG_SDRAM_BASE CFG_DDR_BASE 152 #define CFG_DDR_SDRAM_BASE CFG_DDR_BASE 153 #define CFG_83XX_DDR_USES_CS0 154 #define CFG_MEMTEST_START 0x1000 /* memtest region */ 155 #define CFG_MEMTEST_END 0x2000 156 157 #define CFG_DDR_SDRAM_CLK_CNTL (DDR_SDRAM_CLK_CNTL_SS_EN | \ 158 DDR_SDRAM_CLK_CNTL_CLK_ADJUST_05) 159 160 #ifdef CONFIG_HARD_I2C 161 #define CONFIG_SPD_EEPROM /* use SPD EEPROM for DDR setup*/ 162 #endif 163 164 #ifndef CONFIG_SPD_EEPROM /* No SPD? Then manually set up DDR parameters */ 165 #define CFG_DDR_SIZE 256 /* Mb */ 166 #define CFG_DDR_CONFIG (CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_10) 167 168 #define CFG_DDR_TIMING_1 0x26242321 169 #define CFG_DDR_TIMING_2 0x00000800 /* P9-45, may need tuning */ 170 #endif 171 172 /* 173 *Flash on the Local Bus 174 */ 175 176 #define CFG_FLASH_CFI /* use the Common Flash Interface */ 177 #define CFG_FLASH_CFI_DRIVER /* use the CFI driver */ 178 #define CFG_FLASH_BASE 0xFE000000 /* start of FLASH */ 179 #define CFG_FLASH_EMPTY_INFO 180 #define CFG_MAX_FLASH_SECT 135 /* 127 64KB sectors + 8 8KB sectors per device */ 181 #define CFG_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */ 182 #define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */ 183 #define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT 184 185 /* The ITX has two flash chips, but the ITX-GP has only one. To support both 186 boards, we say we have two, but don't display a message if we find only one. */ 187 #define CFG_FLASH_QUIET_TEST 188 #define CFG_MAX_FLASH_BANKS 2 /* number of banks */ 189 #define CFG_FLASH_BANKS_LIST {CFG_FLASH_BASE, CFG_FLASH_BASE + 0x800000} 190 #define CFG_FLASH_SIZE 16 /* FLASH size in MB */ 191 #define CFG_FLASH_SIZE_SHIFT 4 /* log2 of the above value */ 192 193 /* 194 * BRx, ORx, LBLAWBARx, and LBLAWARx 195 */ 196 197 /* Flash */ 198 199 #define CFG_BR0_PRELIM (CFG_FLASH_BASE | BR_PS_16 | BR_V) 200 #define CFG_OR0_PRELIM ((~(CFG_FLASH_SIZE - 1) << 20) | OR_UPM_XAM | \ 201 OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | OR_GPCM_XACS | OR_GPCM_SCY_15 | \ 202 OR_GPCM_TRLX | OR_GPCM_EHTR | OR_GPCM_EAD) 203 #define CFG_LBLAWBAR0_PRELIM CFG_FLASH_BASE 204 #define CFG_LBLAWAR0_PRELIM (LBLAWAR_EN | (0x13 + CFG_FLASH_SIZE_SHIFT)) 205 206 /* Vitesse 7385 */ 207 208 #ifdef CONFIG_VSC7385 209 210 #define CFG_VSC7385_BASE 0xF8000000 211 212 #define CFG_BR1_PRELIM (CFG_VSC7385_BASE | BR_PS_8 | BR_V) 213 #define CFG_OR1_PRELIM (OR_AM_128KB | OR_GPCM_CSNT | OR_GPCM_XACS | \ 214 OR_GPCM_SCY_15 | OR_GPCM_SETA | OR_GPCM_TRLX | \ 215 OR_GPCM_EHTR | OR_GPCM_EAD) 216 217 #define CFG_LBLAWBAR1_PRELIM CFG_VSC7385_BASE 218 #define CFG_LBLAWAR1_PRELIM (LBLAWAR_EN | LBLAWAR_128KB) 219 220 #endif 221 222 /* LED */ 223 224 #define CFG_LED_BASE 0xF9000000 225 #define CFG_BR2_PRELIM (CFG_LED_BASE | BR_PS_8 | BR_V) 226 #define CFG_OR2_PRELIM (OR_AM_2MB | OR_GPCM_CSNT | OR_GPCM_ACS_0b11 | \ 227 OR_GPCM_XACS | OR_GPCM_SCY_9 | OR_GPCM_TRLX | \ 228 OR_GPCM_EHTR | OR_GPCM_EAD) 229 230 /* Compact Flash */ 231 232 #ifdef CONFIG_COMPACT_FLASH 233 234 #define CFG_CF_BASE 0xF0000000 235 236 #define CFG_BR3_PRELIM (CFG_CF_BASE | BR_PS_16 | BR_MS_UPMA | BR_V) 237 #define CFG_OR3_PRELIM (OR_UPM_AM | OR_UPM_BI) 238 239 #define CFG_LBLAWBAR3_PRELIM CFG_CF_BASE 240 #define CFG_LBLAWAR3_PRELIM (LBLAWAR_EN | LBLAWAR_64KB) 241 242 #endif 243 244 /* 245 * U-Boot memory configuration 246 */ 247 #define CFG_MONITOR_BASE TEXT_BASE /* start of monitor */ 248 249 #if (CFG_MONITOR_BASE < CFG_FLASH_BASE) 250 #define CFG_RAMBOOT 251 #else 252 #undef CFG_RAMBOOT 253 #endif 254 255 #define CONFIG_L1_INIT_RAM 256 #define CFG_INIT_RAM_LOCK 257 #define CFG_INIT_RAM_ADDR 0xFD000000 /* Initial RAM address */ 258 #define CFG_INIT_RAM_END 0x1000 /* End of used area in RAM*/ 259 260 #define CFG_GBL_DATA_SIZE 0x100 /* num bytes initial data */ 261 #define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) 262 #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET 263 264 /* CFG_MONITOR_LEN must be a multiple of CFG_ENV_SECT_SIZE */ 265 #define CFG_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */ 266 #define CFG_MALLOC_LEN (128 * 1024) /* Reserved for malloc */ 267 268 /* 269 * Local Bus LCRR and LBCR regs 270 * LCRR: DLL bypass, Clock divider is 4 271 * External Local Bus rate is 272 * CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV 273 */ 274 #define CFG_LCRR (LCRR_DBYP | LCRR_CLKDIV_4) 275 #define CFG_LBC_LBCR 0x00000000 276 277 #define CFG_LBC_LSRT 0x32000000 /* LB sdram refresh timer, about 6us */ 278 #define CFG_LBC_MRTPR 0x20000000 /* LB refresh timer prescal, 266MHz/32*/ 279 280 /* 281 * Serial Port 282 */ 283 #define CONFIG_CONS_INDEX 1 284 #undef CONFIG_SERIAL_SOFTWARE_FIFO 285 #define CFG_NS16550 286 #define CFG_NS16550_SERIAL 287 #define CFG_NS16550_REG_SIZE 1 288 #define CFG_NS16550_CLK get_bus_freq(0) 289 290 #define CFG_BAUDRATE_TABLE \ 291 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200} 292 293 #define CONFIG_CONSOLE ttyS0 294 #define CONFIG_BAUDRATE 115200 295 296 #define CFG_NS16550_COM1 (CFG_IMMR + 0x4500) 297 #define CFG_NS16550_COM2 (CFG_IMMR + 0x4600) 298 299 /* pass open firmware flat tree */ 300 #define CONFIG_OF_LIBFDT 1 301 #define CONFIG_OF_BOARD_SETUP 302 303 #define OF_CPU "PowerPC,8349@0" 304 #define OF_SOC "soc8349@e0000000" 305 #define OF_TBCLK (bd->bi_busfreq / 4) 306 #define OF_STDOUT_PATH "/soc8349@e0000000/serial@4500" 307 308 /* 309 * PCI 310 */ 311 #ifdef CONFIG_PCI 312 313 #define CONFIG_MPC83XX_PCI2 314 315 /* 316 * General PCI 317 * Addresses are mapped 1-1. 318 */ 319 #define CFG_PCI1_MEM_BASE 0x80000000 320 #define CFG_PCI1_MEM_PHYS CFG_PCI1_MEM_BASE 321 #define CFG_PCI1_MEM_SIZE 0x10000000 /* 256M */ 322 #define CFG_PCI1_MMIO_BASE (CFG_PCI1_MEM_BASE + CFG_PCI1_MEM_SIZE) 323 #define CFG_PCI1_MMIO_PHYS CFG_PCI1_MMIO_BASE 324 #define CFG_PCI1_MMIO_SIZE 0x10000000 /* 256M */ 325 #define CFG_PCI1_IO_BASE 0x00000000 326 #define CFG_PCI1_IO_PHYS 0xE2000000 327 #define CFG_PCI1_IO_SIZE 0x01000000 /* 16M */ 328 329 #ifdef CONFIG_MPC83XX_PCI2 330 #define CFG_PCI2_MEM_BASE (CFG_PCI1_MMIO_BASE + CFG_PCI1_MMIO_SIZE) 331 #define CFG_PCI2_MEM_PHYS CFG_PCI2_MEM_BASE 332 #define CFG_PCI2_MEM_SIZE 0x10000000 /* 256M */ 333 #define CFG_PCI2_MMIO_BASE (CFG_PCI2_MEM_BASE + CFG_PCI2_MEM_SIZE) 334 #define CFG_PCI2_MMIO_PHYS CFG_PCI2_MMIO_BASE 335 #define CFG_PCI2_MMIO_SIZE 0x10000000 /* 256M */ 336 #define CFG_PCI2_IO_BASE 0x00000000 337 #define CFG_PCI2_IO_PHYS (CFG_PCI1_IO_PHYS + CFG_PCI1_IO_SIZE) 338 #define CFG_PCI2_IO_SIZE 0x01000000 /* 16M */ 339 #endif 340 341 #define _IO_BASE 0x00000000 /* points to PCI I/O space */ 342 343 #define CONFIG_NET_MULTI 344 #define CONFIG_PCI_PNP /* do pci plug-and-play */ 345 346 #ifdef CONFIG_RTL8139 347 /* This macro is used by RTL8139 but not defined in PPC architecture */ 348 #define KSEG1ADDR(x) (x) 349 #endif 350 351 #ifndef CONFIG_PCI_PNP 352 #define PCI_ENET0_IOADDR 0x00000000 353 #define PCI_ENET0_MEMADDR CFG_PCI2_MEM_BASE 354 #define PCI_IDSEL_NUMBER 0x0f /* IDSEL = AD15 */ 355 #endif 356 357 #define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ 358 359 #endif 360 361 #define PCI_66M 362 #ifdef PCI_66M 363 #define CONFIG_83XX_CLKIN 66666666 /* in Hz */ 364 #else 365 #define CONFIG_83XX_CLKIN 33333333 /* in Hz */ 366 #endif 367 368 /* TSEC */ 369 370 #ifdef CONFIG_TSEC_ENET 371 372 #define CONFIG_NET_MULTI 373 #define CONFIG_MII 374 #define CONFIG_PHY_GIGE /* In case CONFIG_CMD_MII is specified */ 375 376 #define CONFIG_TSEC1 377 378 #ifdef CONFIG_TSEC1 379 #define CONFIG_HAS_ETH0 380 #define CONFIG_TSEC1_NAME "TSEC0" 381 #define CFG_TSEC1_OFFSET 0x24000 382 #define TSEC1_PHY_ADDR 0x1c /* VSC8201 uses address 0x1c */ 383 #define TSEC1_PHYIDX 0 384 #define TSEC1_FLAGS TSEC_GIGABIT 385 #endif 386 387 #ifdef CONFIG_TSEC2 388 #define CONFIG_HAS_ETH1 389 #define CONFIG_TSEC2_NAME "TSEC1" 390 #define CFG_TSEC2_OFFSET 0x25000 391 #define CONFIG_UNKNOWN_TSEC /* TSEC2 is proprietary */ 392 #define TSEC2_PHY_ADDR 4 393 #define TSEC2_PHYIDX 0 394 #define TSEC2_FLAGS TSEC_GIGABIT 395 #endif 396 397 #define CONFIG_ETHPRIME "Freescale TSEC" 398 399 #endif 400 401 /* 402 * Environment 403 */ 404 #define CONFIG_ENV_OVERWRITE 405 406 #ifndef CFG_RAMBOOT 407 #define CFG_ENV_IS_IN_FLASH 408 #define CFG_ENV_ADDR (CFG_MONITOR_BASE + CFG_MONITOR_LEN) 409 #define CFG_ENV_SECT_SIZE 0x10000 /* 64K (one sector) for environment */ 410 #define CFG_ENV_SIZE 0x2000 411 #else 412 #define CFG_NO_FLASH /* Flash is not usable now */ 413 #undef CFG_FLASH_CFI_DRIVER 414 #define CFG_ENV_IS_NOWHERE /* Store ENV in memory only */ 415 #define CFG_ENV_ADDR (CFG_MONITOR_BASE - 0x1000) 416 #define CFG_ENV_SIZE 0x2000 417 #endif 418 419 #define CONFIG_LOADS_ECHO /* echo on for serial download */ 420 #define CFG_LOADS_BAUD_CHANGE /* allow baudrate change */ 421 422 /* 423 * BOOTP options 424 */ 425 #define CONFIG_BOOTP_BOOTFILESIZE 426 #define CONFIG_BOOTP_BOOTPATH 427 #define CONFIG_BOOTP_GATEWAY 428 #define CONFIG_BOOTP_HOSTNAME 429 430 431 /* 432 * Command line configuration. 433 */ 434 #include <config_cmd_default.h> 435 436 #define CONFIG_CMD_CACHE 437 #define CONFIG_CMD_DATE 438 #define CONFIG_CMD_IRQ 439 #define CONFIG_CMD_NET 440 #define CONFIG_CMD_PING 441 #define CONFIG_CMD_SDRAM 442 443 #ifdef CONFIG_COMPACT_FLASH 444 #define CONFIG_CMD_IDE 445 #define CONFIG_CMD_FAT 446 #endif 447 448 #ifdef CONFIG_PCI 449 #define CONFIG_CMD_PCI 450 #endif 451 452 #ifdef CONFIG_HARD_I2C 453 #define CONFIG_CMD_I2C 454 #endif 455 456 /* Watchdog */ 457 #undef CONFIG_WATCHDOG /* watchdog disabled */ 458 459 /* 460 * Miscellaneous configurable options 461 */ 462 #define CFG_LONGHELP /* undef to save memory */ 463 #define CONFIG_CMDLINE_EDITING /* Command-line editing */ 464 #define CFG_HUSH_PARSER /* Use the HUSH parser */ 465 #define CFG_PROMPT_HUSH_PS2 "> " 466 467 #define CFG_LOAD_ADDR 0x2000000 /* default load address */ 468 #define CONFIG_LOADADDR 200000 /* default location for tftp and bootm */ 469 470 #ifdef CONFIG_MPC8349ITX 471 #define CFG_PROMPT "MPC8349E-mITX> " /* Monitor Command Prompt */ 472 #else 473 #define CFG_PROMPT "MPC8349E-mITX-GP> " /* Monitor Command Prompt */ 474 #endif 475 476 #if defined(CONFIG_CMD_KGDB) 477 #define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ 478 #else 479 #define CFG_CBSIZE 256 /* Console I/O Buffer Size */ 480 #endif 481 482 #define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) /* Print Buffer Size */ 483 #define CFG_MAXARGS 16 /* max number of command args */ 484 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ 485 #define CFG_HZ 1000 /* decrementer freq: 1ms ticks */ 486 487 /* 488 * For booting Linux, the board info and command line data 489 * have to be in the first 8 MB of memory, since this is 490 * the maximum mapped by the Linux kernel during initialization. 491 */ 492 #define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux*/ 493 494 /* 495 * Cache Configuration 496 */ 497 #define CFG_DCACHE_SIZE 32768 498 #define CFG_CACHELINE_SIZE 32 499 #if defined(CONFIG_CMD_KGDB) 500 #define CFG_CACHELINE_SHIFT 5 /* log2 of the above value */ 501 #endif 502 503 #define CFG_HRCW_LOW (\ 504 HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\ 505 HRCWL_DDR_TO_SCB_CLK_1X1 |\ 506 HRCWL_CSB_TO_CLKIN_4X1 |\ 507 HRCWL_VCO_1X2 |\ 508 HRCWL_CORE_TO_CSB_2X1) 509 510 #ifdef CFG_LOWBOOT 511 #define CFG_HRCW_HIGH (\ 512 HRCWH_PCI_HOST |\ 513 HRCWH_32_BIT_PCI |\ 514 HRCWH_PCI1_ARBITER_ENABLE |\ 515 HRCWH_PCI2_ARBITER_ENABLE |\ 516 HRCWH_CORE_ENABLE |\ 517 HRCWH_FROM_0X00000100 |\ 518 HRCWH_BOOTSEQ_DISABLE |\ 519 HRCWH_SW_WATCHDOG_DISABLE |\ 520 HRCWH_ROM_LOC_LOCAL_16BIT |\ 521 HRCWH_TSEC1M_IN_GMII |\ 522 HRCWH_TSEC2M_IN_GMII ) 523 #else 524 #define CFG_HRCW_HIGH (\ 525 HRCWH_PCI_HOST |\ 526 HRCWH_32_BIT_PCI |\ 527 HRCWH_PCI1_ARBITER_ENABLE |\ 528 HRCWH_PCI2_ARBITER_ENABLE |\ 529 HRCWH_CORE_ENABLE |\ 530 HRCWH_FROM_0XFFF00100 |\ 531 HRCWH_BOOTSEQ_DISABLE |\ 532 HRCWH_SW_WATCHDOG_DISABLE |\ 533 HRCWH_ROM_LOC_LOCAL_16BIT |\ 534 HRCWH_TSEC1M_IN_GMII |\ 535 HRCWH_TSEC2M_IN_GMII ) 536 #endif 537 538 /* 539 * System performance 540 */ 541 #define CFG_ACR_PIPE_DEP 3 /* Arbiter pipeline depth (0-3) */ 542 #define CFG_ACR_RPTCNT 3 /* Arbiter repeat count (0-7) */ 543 #define CFG_SPCR_TSEC1EP 3 /* TSEC1 emergency priority (0-3) */ 544 #define CFG_SPCR_TSEC2EP 3 /* TSEC2 emergency priority (0-3) */ 545 #define CFG_SCCR_TSEC1CM 1 /* TSEC1 clock mode (0-3) */ 546 #define CFG_SCCR_TSEC2CM 1 /* TSEC2 & I2C0 clock mode (0-3) */ 547 548 /* 549 * System IO Config 550 */ 551 #define CFG_SICRH SICRH_TSOBI1 /* Needed for gigabit to work on TSEC 1 */ 552 #define CFG_SICRL (SICRL_LDP_A | SICRL_USB1) 553 554 #define CFG_HID0_INIT 0x000000000 555 #define CFG_HID0_FINAL CFG_HID0_INIT 556 557 #define CFG_HID2 HID2_HBE 558 559 /* DDR */ 560 #define CFG_IBAT0L (CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) 561 #define CFG_IBAT0U (CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) 562 563 /* PCI */ 564 #ifdef CONFIG_PCI 565 #define CFG_IBAT1L (CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) 566 #define CFG_IBAT1U (CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) 567 #define CFG_IBAT2L (CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 568 #define CFG_IBAT2U (CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) 569 #else 570 #define CFG_IBAT1L 0 571 #define CFG_IBAT1U 0 572 #define CFG_IBAT2L 0 573 #define CFG_IBAT2U 0 574 #endif 575 576 #ifdef CONFIG_MPC83XX_PCI2 577 #define CFG_IBAT3L (CFG_PCI2_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE) 578 #define CFG_IBAT3U (CFG_PCI2_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP) 579 #define CFG_IBAT4L (CFG_PCI2_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 580 #define CFG_IBAT4U (CFG_PCI2_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP) 581 #else 582 #define CFG_IBAT3L 0 583 #define CFG_IBAT3U 0 584 #define CFG_IBAT4L 0 585 #define CFG_IBAT4U 0 586 #endif 587 588 /* IMMRBAR @ 0xE0000000, PCI IO @ 0xE2000000 & BCSR @ 0xE2400000 */ 589 #define CFG_IBAT5L (CFG_IMMR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE) 590 #define CFG_IBAT5U (CFG_IMMR | BATU_BL_256M | BATU_VS | BATU_VP) 591 592 /* SDRAM @ 0xF0000000, stack in DCACHE 0xFDF00000 & FLASH @ 0xFE000000 */ 593 #define CFG_IBAT6L (0xF0000000 | BATL_PP_10 | BATL_MEMCOHERENCE) 594 #define CFG_IBAT6U (0xF0000000 | BATU_BL_256M | BATU_VS | BATU_VP) 595 596 #define CFG_IBAT7L 0 597 #define CFG_IBAT7U 0 598 599 #define CFG_DBAT0L CFG_IBAT0L 600 #define CFG_DBAT0U CFG_IBAT0U 601 #define CFG_DBAT1L CFG_IBAT1L 602 #define CFG_DBAT1U CFG_IBAT1U 603 #define CFG_DBAT2L CFG_IBAT2L 604 #define CFG_DBAT2U CFG_IBAT2U 605 #define CFG_DBAT3L CFG_IBAT3L 606 #define CFG_DBAT3U CFG_IBAT3U 607 #define CFG_DBAT4L CFG_IBAT4L 608 #define CFG_DBAT4U CFG_IBAT4U 609 #define CFG_DBAT5L CFG_IBAT5L 610 #define CFG_DBAT5U CFG_IBAT5U 611 #define CFG_DBAT6L CFG_IBAT6L 612 #define CFG_DBAT6U CFG_IBAT6U 613 #define CFG_DBAT7L CFG_IBAT7L 614 #define CFG_DBAT7U CFG_IBAT7U 615 616 /* 617 * Internal Definitions 618 * 619 * Boot Flags 620 */ 621 #define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */ 622 #define BOOTFLAG_WARM 0x02 /* Software reboot */ 623 624 #if defined(CONFIG_CMD_KGDB) 625 #define CONFIG_KGDB_BAUDRATE 230400 /* speed of kgdb serial port */ 626 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 627 #endif 628 629 630 /* 631 * Environment Configuration 632 */ 633 #define CONFIG_ENV_OVERWRITE 634 635 #ifdef CONFIG_TSEC1 636 #define CONFIG_ETHADDR 00:E0:0C:00:8C:01 637 #endif 638 639 #ifdef CONFIG_TSEC2 640 #define CONFIG_ETH1ADDR 00:E0:0C:00:8C:02 641 #endif 642 643 #define CONFIG_IPADDR 192.168.1.253 644 #define CONFIG_SERVERIP 192.168.1.1 645 #define CONFIG_GATEWAYIP 192.168.1.1 646 #define CONFIG_NETMASK 255.255.252.0 647 #define CONFIG_NETDEV eth0 648 649 #ifdef CONFIG_MPC8349ITX 650 #define CONFIG_HOSTNAME mpc8349emitx 651 #else 652 #define CONFIG_HOSTNAME mpc8349emitxgp 653 #endif 654 655 /* Default path and filenames */ 656 #define CONFIG_ROOTPATH /nfsroot/rootfs 657 #define CONFIG_BOOTFILE uImage 658 #define CONFIG_UBOOTPATH u-boot.bin /* U-Boot image on TFTP server */ 659 660 #ifdef CONFIG_MPC8349ITX 661 #define CONFIG_FDTFILE mpc8349emitx.dtb 662 #else 663 #define CONFIG_FDTFILE mpc8349emitxgp.dtb 664 #endif 665 666 #define CONFIG_BOOTDELAY 0 667 668 #define XMK_STR(x) #x 669 #define MK_STR(x) XMK_STR(x) 670 671 #define CONFIG_BOOTARGS \ 672 "root=/dev/nfs rw" \ 673 " nfsroot=" MK_STR(CONFIG_SERVERIP) ":" MK_STR(CONFIG_ROOTPATH) \ 674 " ip=" MK_STR(CONFIG_IPADDR) ":" MK_STR(CONFIG_SERVERIP) ":" \ 675 MK_STR(CONFIG_GATEWAYIP) ":" MK_STR(CONFIG_NETMASK) ":" \ 676 MK_STR(CONFIG_HOSTNAME) ":" MK_STR(CONFIG_NETDEV) ":off" \ 677 " console=" MK_STR(CONFIG_CONSOLE) "," MK_STR(CONFIG_BAUDRATE) 678 679 #define CONFIG_EXTRA_ENV_SETTINGS \ 680 "console=" MK_STR(CONFIG_CONSOLE) "\0" \ 681 "netdev=" MK_STR(CONFIG_NETDEV) "\0" \ 682 "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \ 683 "tftpflash=tftpboot $loadaddr $uboot; " \ 684 "protect off " MK_STR(TEXT_BASE) " +$filesize; " \ 685 "erase " MK_STR(TEXT_BASE) " +$filesize; " \ 686 "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \ 687 "protect on " MK_STR(TEXT_BASE) " +$filesize; " \ 688 "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \ 689 "fdtaddr=400000\0" \ 690 "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" 691 692 #define CONFIG_NFSBOOTCOMMAND \ 693 "setenv bootargs root=/dev/nfs rw nfsroot=$serverip:$rootpath" \ 694 " ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off " \ 695 " console=$console,$baudrate $othbootargs; " \ 696 "tftp $loadaddr $bootfile;" \ 697 "tftp $fdtaddr $fdtfile;" \ 698 "bootm $loadaddr - $fdtaddr" 699 700 #define CONFIG_RAMBOOTCOMMAND \ 701 "setenv bootargs root=/dev/ram rw" \ 702 " console=$console,$baudrate $othbootargs; " \ 703 "tftp $ramdiskaddr $ramdiskfile;" \ 704 "tftp $loadaddr $bootfile;" \ 705 "tftp $fdtaddr $fdtfile;" \ 706 "bootm $loadaddr $ramdiskaddr $fdtaddr" 707 708 #undef MK_STR 709 #undef XMK_STR 710 711 #endif 712