1 /* 2 * Configuation settings for the Freescale MCF5475 board. 3 * 4 * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. 5 * TsiChung Liew (Tsi-Chung.Liew@freescale.com) 6 * 7 * See file CREDITS for list of people who contributed to this 8 * project. 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation; either version 2 of 13 * the License, or (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 * 20 * You should have received a copy of the GNU General Public License 21 * along with this program; if not, write to the Free Software 22 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 23 * MA 02111-1307 USA 24 */ 25 26 /* 27 * board/config.h - configuration options, board specific 28 */ 29 30 #ifndef _M5475EVB_H 31 #define _M5475EVB_H 32 33 /* 34 * High Level Configuration Options 35 * (easy to change) 36 */ 37 #define CONFIG_MCF547x_8x /* define processor family */ 38 #define CONFIG_M547x /* define processor type */ 39 #define CONFIG_M5475 /* define processor type */ 40 41 #define CONFIG_MCFUART 42 #define CFG_UART_PORT (0) 43 #define CONFIG_BAUDRATE 115200 44 #define CFG_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } 45 46 #define CONFIG_HW_WATCHDOG 47 #define CONFIG_WATCHDOG_TIMEOUT 5000 /* timeout in milliseconds, max timeout is 6.71sec */ 48 49 /* Command line configuration */ 50 #include <config_cmd_default.h> 51 52 #define CONFIG_CMD_CACHE 53 #undef CONFIG_CMD_DATE 54 #define CONFIG_CMD_ELF 55 #define CONFIG_CMD_FLASH 56 #define CONFIG_CMD_I2C 57 #define CONFIG_CMD_MEMORY 58 #define CONFIG_CMD_MISC 59 #define CONFIG_CMD_MII 60 #define CONFIG_CMD_NET 61 #define CONFIG_CMD_PCI 62 #define CONFIG_CMD_PING 63 #define CONFIG_CMD_REGINFO 64 #define CONFIG_CMD_USB 65 66 #define CONFIG_SLTTMR 67 68 #define CONFIG_FSLDMAFEC 69 #ifdef CONFIG_FSLDMAFEC 70 # define CONFIG_NET_MULTI 1 71 # define CONFIG_MII 1 72 # define CONFIG_MII_INIT 1 73 # define CONFIG_HAS_ETH1 74 75 # define CFG_DISCOVER_PHY 76 # define CFG_RX_ETH_BUFFER 32 77 # define CFG_TX_ETH_BUFFER 48 78 # define CFG_FAULT_ECHO_LINK_DOWN 79 80 # define CFG_FEC0_PINMUX 0 81 # define CFG_FEC0_MIIBASE CFG_FEC0_IOBASE 82 # define CFG_FEC1_PINMUX 0 83 # define CFG_FEC1_MIIBASE CFG_FEC0_IOBASE 84 85 # define MCFFEC_TOUT_LOOP 50000 86 /* If CFG_DISCOVER_PHY is not defined - hardcoded */ 87 # ifndef CFG_DISCOVER_PHY 88 # define FECDUPLEX FULL 89 # define FECSPEED _100BASET 90 # else 91 # ifndef CFG_FAULT_ECHO_LINK_DOWN 92 # define CFG_FAULT_ECHO_LINK_DOWN 93 # endif 94 # endif /* CFG_DISCOVER_PHY */ 95 96 # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 97 # define CONFIG_ETH1ADDR 00:e0:0c:bc:e5:61 98 # define CONFIG_IPADDR 192.162.1.2 99 # define CONFIG_NETMASK 255.255.255.0 100 # define CONFIG_SERVERIP 192.162.1.1 101 # define CONFIG_GATEWAYIP 192.162.1.1 102 # define CONFIG_OVERWRITE_ETHADDR_ONCE 103 104 #endif 105 106 #ifdef CONFIG_CMD_USB 107 # define CONFIG_USB_OHCI_NEW 108 # define CONFIG_USB_STORAGE 109 110 # ifndef CONFIG_CMD_PCI 111 # define CONFIG_CMD_PCI 112 # endif 113 # define CONFIG_PCI_OHCI 114 # define CONFIG_DOS_PARTITION 115 116 # undef CFG_USB_OHCI_BOARD_INIT 117 # undef CFG_USB_OHCI_CPU_INIT 118 # define CFG_USB_OHCI_MAX_ROOT_PORTS 15 119 # define CFG_USB_OHCI_SLOT_NAME "isp1561" 120 # define CFG_OHCI_SWAP_REG_ACCESS 121 #endif 122 123 /* I2C */ 124 #define CONFIG_FSL_I2C 125 #define CONFIG_HARD_I2C /* I2C with hw support */ 126 #undef CONFIG_SOFT_I2C /* I2C bit-banged */ 127 #define CFG_I2C_SPEED 80000 128 #define CFG_I2C_SLAVE 0x7F 129 #define CFG_I2C_OFFSET 0x00008F00 130 #define CFG_IMMR CFG_MBAR 131 132 /* PCI */ 133 #ifdef CONFIG_CMD_PCI 134 #define CONFIG_PCI 1 135 #define CONFIG_PCI_PNP 1 136 #define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1 137 138 #define CFG_PCI_CACHE_LINE_SIZE 8 139 140 #define CFG_PCI_MEM_BUS 0x80000000 141 #define CFG_PCI_MEM_PHYS CFG_PCI_MEM_BUS 142 #define CFG_PCI_MEM_SIZE 0x10000000 143 144 #define CFG_PCI_IO_BUS 0x71000000 145 #define CFG_PCI_IO_PHYS CFG_PCI_IO_BUS 146 #define CFG_PCI_IO_SIZE 0x01000000 147 148 #define CFG_PCI_CFG_BUS 0x70000000 149 #define CFG_PCI_CFG_PHYS CFG_PCI_CFG_BUS 150 #define CFG_PCI_CFG_SIZE 0x01000000 151 #endif 152 153 #define CONFIG_BOOTDELAY 1 /* autoboot after 5 seconds */ 154 #define CONFIG_UDP_CHECKSUM 155 156 #ifdef CONFIG_MCFFEC 157 # define CONFIG_ETHADDR 00:e0:0c:bc:e5:60 158 # define CONFIG_IPADDR 192.162.1.2 159 # define CONFIG_NETMASK 255.255.255.0 160 # define CONFIG_SERVERIP 192.162.1.1 161 # define CONFIG_GATEWAYIP 192.162.1.1 162 # define CONFIG_OVERWRITE_ETHADDR_ONCE 163 #endif /* FEC_ENET */ 164 165 #define CONFIG_HOSTNAME M547xEVB 166 #define CONFIG_EXTRA_ENV_SETTINGS \ 167 "netdev=eth0\0" \ 168 "loadaddr=10000\0" \ 169 "u-boot=u-boot.bin\0" \ 170 "load=tftp ${loadaddr) ${u-boot}\0" \ 171 "upd=run load; run prog\0" \ 172 "prog=prot off bank 1;" \ 173 "era ff800000 ff82ffff;" \ 174 "cp.b ${loadaddr} ff800000 ${filesize};"\ 175 "save\0" \ 176 "" 177 178 #define CONFIG_PRAM 512 /* 512 KB */ 179 #define CFG_PROMPT "-> " 180 #define CFG_LONGHELP /* undef to save memory */ 181 182 #ifdef CONFIG_CMD_KGDB 183 # define CFG_CBSIZE 1024 /* Console I/O Buffer Size */ 184 #else 185 # define CFG_CBSIZE 256 /* Console I/O Buffer Size */ 186 #endif 187 188 #define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */ 189 #define CFG_MAXARGS 16 /* max number of command args */ 190 #define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */ 191 #define CFG_LOAD_ADDR 0x00010000 192 193 #define CFG_HZ 1000 194 #define CFG_CLK CFG_BUSCLK 195 #define CFG_CPU_CLK CFG_CLK * 2 196 197 #define CFG_MBAR 0xF0000000 198 #define CFG_INTSRAM (CFG_MBAR + 0x10000) 199 #define CFG_INTSRAMSZ 0x8000 200 201 /*#define CFG_LATCH_ADDR (CFG_CS1_BASE + 0x80000)*/ 202 203 /* 204 * Low Level Configuration Settings 205 * (address mappings, register initial values, etc.) 206 * You should know what you are doing if you make changes here. 207 */ 208 /*----------------------------------------------------------------------- 209 * Definitions for initial stack pointer and data area (in DPRAM) 210 */ 211 #define CFG_INIT_RAM_ADDR 0xF2000000 212 #define CFG_INIT_RAM_END 0x1000 /* End of used area in internal SRAM */ 213 #define CFG_INIT_RAM_CTRL 0x21 214 #define CFG_INIT_RAM1_ADDR (CFG_INIT_RAM_ADDR + CFG_INIT_RAM_END) 215 #define CFG_INIT_RAM1_END 0x1000 /* End of used area in internal SRAM */ 216 #define CFG_INIT_RAM1_CTRL 0x21 217 #define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ 218 #define CFG_GBL_DATA_OFFSET ((CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE) - 0x10) 219 #define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET 220 221 /*----------------------------------------------------------------------- 222 * Start addresses for the final memory configuration 223 * (Set up by the startup code) 224 * Please note that CFG_SDRAM_BASE _must_ start at 0 225 */ 226 #define CFG_SDRAM_BASE 0x00000000 227 #define CFG_SDRAM_CFG1 0x73711630 228 #define CFG_SDRAM_CFG2 0x46370000 229 #define CFG_SDRAM_CTRL 0xE10B0000 230 #define CFG_SDRAM_EMOD 0x40010000 231 #define CFG_SDRAM_MODE 0x018D0000 232 #define CFG_SDRAM_DRVSTRENGTH 0x000002AA 233 #ifdef CFG_DRAMSZ1 234 # define CFG_SDRAM_SIZE (CFG_DRAMSZ + CFG_DRAMSZ1) 235 #else 236 # define CFG_SDRAM_SIZE CFG_DRAMSZ 237 #endif 238 239 #define CFG_MEMTEST_START CFG_SDRAM_BASE + 0x400 240 #define CFG_MEMTEST_END ((CFG_SDRAM_SIZE - 3) << 20) 241 242 #define CFG_MONITOR_BASE (CFG_FLASH_BASE + 0x400) 243 #define CFG_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ 244 245 #define CFG_BOOTPARAMS_LEN 64*1024 246 #define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ 247 248 /* 249 * For booting Linux, the board info and command line data 250 * have to be in the first 8 MB of memory, since this is 251 * the maximum mapped by the Linux kernel during initialization ?? 252 */ 253 #define CFG_BOOTMAPSZ (CFG_SDRAM_BASE + (CFG_SDRAM_SIZE << 20)) 254 255 /*----------------------------------------------------------------------- 256 * FLASH organization 257 */ 258 #define CFG_FLASH_CFI 259 #ifdef CFG_FLASH_CFI 260 # define CFG_FLASH_BASE (CFG_CS0_BASE) 261 # define CFG_FLASH_CFI_DRIVER 1 262 # define CFG_FLASH_CFI_WIDTH FLASH_CFI_16BIT 263 # define CFG_MAX_FLASH_SECT 137 /* max number of sectors on one chip */ 264 # define CFG_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ 265 # define CFG_FLASH_USE_BUFFER_WRITE 266 #ifdef CFG_NOR1SZ 267 # define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */ 268 # define CFG_FLASH_SIZE ((CFG_NOR1SZ + CFG_BOOTSZ) << 20) 269 # define CFG_FLASH_BANKS_LIST { CFG_CS0_BASE, CFG_CS1_BASE } 270 #else 271 # define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */ 272 # define CFG_FLASH_SIZE (CFG_BOOTSZ << 20) 273 #endif 274 #endif 275 276 /* Configuration for environment 277 * Environment is embedded in u-boot in the second sector of the flash 278 */ 279 #define CFG_ENV_OFFSET 0x2000 280 #define CFG_ENV_SECT_SIZE 0x2000 281 #define CFG_ENV_IS_IN_FLASH 1 282 #define CFG_ENV_IS_EMBEDDED 1 283 284 /*----------------------------------------------------------------------- 285 * Cache Configuration 286 */ 287 #define CFG_CACHELINE_SIZE 16 288 289 /*----------------------------------------------------------------------- 290 * Chipselect bank definitions 291 */ 292 /* 293 * CS0 - NOR Flash 1, 2, 4, or 8MB 294 * CS1 - NOR Flash 295 * CS2 - Available 296 * CS3 - Available 297 * CS4 - Available 298 * CS5 - Available 299 */ 300 #define CFG_CS0_BASE 0xFF800000 301 #define CFG_CS0_MASK (((CFG_BOOTSZ << 20) - 1) & 0xFFFF0001) 302 #define CFG_CS0_CTRL 0x00101980 303 304 #ifdef CFG_NOR1SZ 305 #define CFG_CS1_BASE 0xF8000000 306 #define CFG_CS1_MASK (((CFG_NOR1SZ << 20) - 1) & 0xFFFF0001) 307 #define CFG_CS1_CTRL 0x00000D80 308 #endif 309 310 #endif /* _M5475EVB_H */ 311