1 /* 2 * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. 3 * Hayden Fraser (Hayden.Fraser@freescale.com) 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef _M5253EVBE_H 9 #define _M5253EVBE_H 10 11 #define CONFIG_M5253EVBE /* define board type */ 12 13 #define CONFIG_MCFTMR 14 15 #define CONFIG_MCFUART 16 #define CONFIG_SYS_UART_PORT (0) 17 18 #undef CONFIG_WATCHDOG /* disable watchdog */ 19 20 21 /* Configuration for environment 22 * Environment is embedded in u-boot in the second sector of the flash 23 */ 24 #ifndef CONFIG_MONITOR_IS_IN_RAM 25 #define CONFIG_ENV_OFFSET 0x4000 26 #define CONFIG_ENV_SECT_SIZE 0x2000 27 #else 28 #define CONFIG_ENV_ADDR 0xffe04000 29 #define CONFIG_ENV_SECT_SIZE 0x2000 30 #endif 31 32 #define LDS_BOARD_TEXT \ 33 . = DEFINED(env_offset) ? env_offset : .; \ 34 env/embedded.o(.text) 35 36 /* 37 * BOOTP options 38 */ 39 #undef CONFIG_BOOTP_BOOTFILESIZE 40 #undef CONFIG_BOOTP_BOOTPATH 41 #undef CONFIG_BOOTP_GATEWAY 42 #undef CONFIG_BOOTP_HOSTNAME 43 44 /* 45 * Command line configuration. 46 */ 47 48 /* ATA */ 49 #define CONFIG_IDE_RESET 1 50 #define CONFIG_IDE_PREINIT 1 51 #define CONFIG_ATAPI 52 #undef CONFIG_LBA48 53 54 #define CONFIG_SYS_IDE_MAXBUS 1 55 #define CONFIG_SYS_IDE_MAXDEVICE 2 56 57 #define CONFIG_SYS_ATA_BASE_ADDR (CONFIG_SYS_MBAR2 + 0x800) 58 #define CONFIG_SYS_ATA_IDE0_OFFSET 0 59 60 #define CONFIG_SYS_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */ 61 #define CONFIG_SYS_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ 62 #define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ 63 #define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */ 64 65 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 66 67 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 68 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 69 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 70 71 #define CONFIG_SYS_LOAD_ADDR 0x00100000 72 73 #define CONFIG_SYS_MEMTEST_START 0x400 74 #define CONFIG_SYS_MEMTEST_END 0x380000 75 76 #undef CONFIG_SYS_PLL_BYPASS /* bypass PLL for test purpose */ 77 #define CONFIG_SYS_FAST_CLK 78 #ifdef CONFIG_SYS_FAST_CLK 79 # define CONFIG_SYS_PLLCR 0x1243E054 80 # define CONFIG_SYS_CLK 140000000 81 #else 82 # define CONFIG_SYS_PLLCR 0x135a4140 83 # define CONFIG_SYS_CLK 70000000 84 #endif 85 86 /* 87 * Low Level Configuration Settings 88 * (address mappings, register initial values, etc.) 89 * You should know what you are doing if you make changes here. 90 */ 91 92 #define CONFIG_SYS_MBAR 0x10000000 /* Register Base Addrs */ 93 #define CONFIG_SYS_MBAR2 0x80000000 /* Module Base Addrs 2 */ 94 95 /* 96 * Definitions for initial stack pointer and data area (in DPRAM) 97 */ 98 #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 99 #define CONFIG_SYS_INIT_RAM_SIZE 0x10000 /* Size of used area in internal SRAM */ 100 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 101 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 102 103 /* 104 * Start addresses for the final memory configuration 105 * (Set up by the startup code) 106 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 107 */ 108 #define CONFIG_SYS_SDRAM_BASE 0x00000000 109 #define CONFIG_SYS_SDRAM_SIZE 8 /* SDRAM size in MB */ 110 111 #ifdef CONFIG_MONITOR_IS_IN_RAM 112 #define CONFIG_SYS_MONITOR_BASE 0x20000 113 #else 114 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) 115 #endif 116 117 #define CONFIG_SYS_MONITOR_LEN 0x40000 118 #define CONFIG_SYS_MALLOC_LEN (256 << 10) 119 #define CONFIG_SYS_BOOTPARAMS_LEN (64*1024) 120 121 /* 122 * For booting Linux, the board info and command line data 123 * have to be in the first 8 MB of memory, since this is 124 * the maximum mapped by the Linux kernel during initialization ?? 125 */ 126 #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) 127 #define CONFIG_SYS_BOOTM_LEN (CONFIG_SYS_SDRAM_SIZE << 20) 128 129 /* FLASH organization */ 130 #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE 131 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 132 #define CONFIG_SYS_MAX_FLASH_SECT 35 /* max number of sectors on one chip */ 133 #define CONFIG_SYS_FLASH_ERASE_TOUT 1000 134 135 #define CONFIG_SYS_FLASH_CFI 1 136 #define CONFIG_FLASH_CFI_DRIVER 1 137 #define CONFIG_SYS_FLASH_SIZE 0x200000 138 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 139 140 /* Cache Configuration */ 141 #define CONFIG_SYS_CACHELINE_SIZE 16 142 143 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ 144 CONFIG_SYS_INIT_RAM_SIZE - 8) 145 #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ 146 CONFIG_SYS_INIT_RAM_SIZE - 4) 147 #define CONFIG_SYS_ICACHE_INV (CF_CACR_DCM) 148 #define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_FLASH_BASE | \ 149 CF_ADDRMASK(2) | \ 150 CF_ACR_EN | CF_ACR_SM_ALL) 151 #define CONFIG_SYS_CACHE_ACR1 (CONFIG_SYS_SDRAM_BASE | \ 152 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ 153 CF_ACR_EN | CF_ACR_SM_ALL) 154 #define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CEIB | \ 155 CF_CACR_DBWE) 156 157 /* Port configuration */ 158 #define CONFIG_SYS_FECI2C 0xF0 159 160 #define CONFIG_SYS_CS0_BASE 0xFFE00000 161 #define CONFIG_SYS_CS0_MASK 0x001F0021 162 #define CONFIG_SYS_CS0_CTRL 0x00001D80 163 164 /*----------------------------------------------------------------------- 165 * Port configuration 166 */ 167 #define CONFIG_SYS_GPIO_FUNC 0x00000008 /* Set gpio pins: none */ 168 #define CONFIG_SYS_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54 */ 169 #define CONFIG_SYS_GPIO_EN 0x00000008 /* Set gpio output enable */ 170 #define CONFIG_SYS_GPIO1_EN 0x00c70000 /* Set gpio output enable */ 171 #define CONFIG_SYS_GPIO_OUT 0x00000008 /* Set outputs to default state */ 172 #define CONFIG_SYS_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ 173 #define CONFIG_SYS_GPIO1_LED 0x00400000 /* user led */ 174 175 #endif /* _M5253EVB_H */ 176