1 /* 2 * Copyright (C) 2004-2007 Freescale Semiconductor, Inc. 3 * Hayden Fraser (Hayden.Fraser@freescale.com) 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 */ 23 24 #ifndef _M5253EVBE_H 25 #define _M5253EVBE_H 26 27 #define CONFIG_MCF52x2 /* define processor family */ 28 #define CONFIG_M5253 /* define processor type */ 29 #define CONFIG_M5253EVBE /* define board type */ 30 31 #define CONFIG_MCFTMR 32 33 #define CONFIG_MCFUART 34 #define CONFIG_SYS_UART_PORT (0) 35 #define CONFIG_BAUDRATE 115200 36 #define CONFIG_SYS_BAUDRATE_TABLE { 9600 , 19200 , 38400 , 57600, 115200 } 37 38 #undef CONFIG_WATCHDOG /* disable watchdog */ 39 40 #define CONFIG_BOOTDELAY 5 41 42 /* Configuration for environment 43 * Environment is embedded in u-boot in the second sector of the flash 44 */ 45 #ifndef CONFIG_MONITOR_IS_IN_RAM 46 #define CONFIG_ENV_OFFSET 0x4000 47 #define CONFIG_ENV_SECT_SIZE 0x2000 48 #define CONFIG_ENV_IS_IN_FLASH 1 49 #else 50 #define CONFIG_ENV_ADDR 0xffe04000 51 #define CONFIG_ENV_SECT_SIZE 0x2000 52 #define CONFIG_ENV_IS_IN_FLASH 1 53 #endif 54 55 /* 56 * BOOTP options 57 */ 58 #undef CONFIG_BOOTP_BOOTFILESIZE 59 #undef CONFIG_BOOTP_BOOTPATH 60 #undef CONFIG_BOOTP_GATEWAY 61 #undef CONFIG_BOOTP_HOSTNAME 62 63 /* 64 * Command line configuration. 65 */ 66 #include <config_cmd_default.h> 67 #undef CONFIG_CMD_NET 68 #define CONFIG_CMD_LOADB 69 #define CONFIG_CMD_LOADS 70 #define CONFIG_CMD_EXT2 71 #define CONFIG_CMD_FAT 72 #define CONFIG_CMD_IDE 73 #define CONFIG_CMD_MEMORY 74 #define CONFIG_CMD_MISC 75 76 /* ATA */ 77 #define CONFIG_DOS_PARTITION 78 #define CONFIG_MAC_PARTITION 79 #define CONFIG_IDE_RESET 1 80 #define CONFIG_IDE_PREINIT 1 81 #define CONFIG_ATAPI 82 #undef CONFIG_LBA48 83 84 #define CONFIG_SYS_IDE_MAXBUS 1 85 #define CONFIG_SYS_IDE_MAXDEVICE 2 86 87 #define CONFIG_SYS_ATA_BASE_ADDR (CONFIG_SYS_MBAR2 + 0x800) 88 #define CONFIG_SYS_ATA_IDE0_OFFSET 0 89 90 #define CONFIG_SYS_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */ 91 #define CONFIG_SYS_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ 92 #define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ 93 #define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */ 94 #define _IO_BASE 0 95 96 #define CONFIG_SYS_PROMPT "=> " 97 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 98 99 #if defined(CONFIG_CMD_KGDB) 100 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 101 #else 102 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 103 #endif 104 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 105 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 106 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 107 108 #define CONFIG_SYS_LOAD_ADDR 0x00100000 109 110 #define CONFIG_SYS_MEMTEST_START 0x400 111 #define CONFIG_SYS_MEMTEST_END 0x380000 112 113 #define CONFIG_SYS_HZ 1000 114 115 #undef CONFIG_SYS_PLL_BYPASS /* bypass PLL for test purpose */ 116 #define CONFIG_SYS_FAST_CLK 117 #ifdef CONFIG_SYS_FAST_CLK 118 # define CONFIG_SYS_PLLCR 0x1243E054 119 # define CONFIG_SYS_CLK 140000000 120 #else 121 # define CONFIG_SYS_PLLCR 0x135a4140 122 # define CONFIG_SYS_CLK 70000000 123 #endif 124 125 /* 126 * Low Level Configuration Settings 127 * (address mappings, register initial values, etc.) 128 * You should know what you are doing if you make changes here. 129 */ 130 131 #define CONFIG_SYS_MBAR 0x10000000 /* Register Base Addrs */ 132 #define CONFIG_SYS_MBAR2 0x80000000 /* Module Base Addrs 2 */ 133 134 /* 135 * Definitions for initial stack pointer and data area (in DPRAM) 136 */ 137 #define CONFIG_SYS_INIT_RAM_ADDR 0x20000000 138 #define CONFIG_SYS_INIT_RAM_END 0x10000 /* End of used area in internal SRAM */ 139 #define CONFIG_SYS_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */ 140 #define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE) 141 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 142 143 /* 144 * Start addresses for the final memory configuration 145 * (Set up by the startup code) 146 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 147 */ 148 #define CONFIG_SYS_SDRAM_BASE 0x00000000 149 #define CONFIG_SYS_SDRAM_SIZE 8 /* SDRAM size in MB */ 150 151 #ifdef CONFIG_MONITOR_IS_IN_RAM 152 #define CONFIG_SYS_MONITOR_BASE 0x20000 153 #else 154 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) 155 #endif 156 157 #define CONFIG_SYS_MONITOR_LEN 0x40000 158 #define CONFIG_SYS_MALLOC_LEN (256 << 10) 159 #define CONFIG_SYS_BOOTPARAMS_LEN (64*1024) 160 161 /* 162 * For booting Linux, the board info and command line data 163 * have to be in the first 8 MB of memory, since this is 164 * the maximum mapped by the Linux kernel during initialization ?? 165 */ 166 #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) 167 #define CONFIG_SYS_BOOTM_LEN (CONFIG_SYS_SDRAM_SIZE << 20) 168 169 /* FLASH organization */ 170 #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE 171 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 172 #define CONFIG_SYS_MAX_FLASH_SECT 35 /* max number of sectors on one chip */ 173 #define CONFIG_SYS_FLASH_ERASE_TOUT 1000 174 175 #define CONFIG_SYS_FLASH_CFI 1 176 #define CONFIG_FLASH_CFI_DRIVER 1 177 #define CONFIG_SYS_FLASH_SIZE 0x200000 178 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 179 180 /* Cache Configuration */ 181 #define CONFIG_SYS_CACHELINE_SIZE 16 182 183 /* Port configuration */ 184 #define CONFIG_SYS_FECI2C 0xF0 185 186 #define CONFIG_SYS_CS0_BASE 0xFFE00000 187 #define CONFIG_SYS_CS0_MASK 0x001F0021 188 #define CONFIG_SYS_CS0_CTRL 0x00001D80 189 190 /*----------------------------------------------------------------------- 191 * Port configuration 192 */ 193 #define CONFIG_SYS_GPIO_FUNC 0x00000008 /* Set gpio pins: none */ 194 #define CONFIG_SYS_GPIO1_FUNC 0x00df00f0 /* 36-39(SWITCH),48-52(FPGAs),54 */ 195 #define CONFIG_SYS_GPIO_EN 0x00000008 /* Set gpio output enable */ 196 #define CONFIG_SYS_GPIO1_EN 0x00c70000 /* Set gpio output enable */ 197 #define CONFIG_SYS_GPIO_OUT 0x00000008 /* Set outputs to default state */ 198 #define CONFIG_SYS_GPIO1_OUT 0x00c70000 /* Set outputs to default state */ 199 #define CONFIG_SYS_GPIO1_LED 0x00400000 /* user led */ 200 201 #endif /* _M5253EVB_H */ 202