1 /* 2 * Configuation settings for the Freescale MCF5208EVBe. 3 * 4 * Copyright (C) 2004-2008 Freescale Semiconductor, Inc. 5 * TsiChung Liew (Tsi-Chung.Liew@freescale.com) 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef _M5208EVBE_H 11 #define _M5208EVBE_H 12 13 /* 14 * High Level Configuration Options 15 * (easy to change) 16 */ 17 #define CONFIG_MCFUART 18 #define CONFIG_SYS_UART_PORT (0) 19 20 #undef CONFIG_WATCHDOG 21 #define CONFIG_WATCHDOG_TIMEOUT 5000 22 23 #define CONFIG_MCFFEC 24 #ifdef CONFIG_MCFFEC 25 # define CONFIG_MII 1 26 # define CONFIG_MII_INIT 1 27 # define CONFIG_SYS_DISCOVER_PHY 28 # define CONFIG_SYS_RX_ETH_BUFFER 8 29 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 30 # define CONFIG_HAS_ETH1 31 32 # define CONFIG_SYS_FEC0_PINMUX 0 33 # define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE 34 # define MCFFEC_TOUT_LOOP 50000 35 /* If CONFIG_SYS_DISCOVER_PHY is not defined - hardcoded */ 36 # ifndef CONFIG_SYS_DISCOVER_PHY 37 # define FECDUPLEX FULL 38 # define FECSPEED _100BASET 39 # else 40 # ifndef CONFIG_SYS_FAULT_ECHO_LINK_DOWN 41 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 42 # endif 43 # endif /* CONFIG_SYS_DISCOVER_PHY */ 44 #endif 45 46 /* Timer */ 47 #define CONFIG_MCFTMR 48 #undef CONFIG_MCFPIT 49 50 /* I2C */ 51 #define CONFIG_SYS_I2C 52 #define CONFIG_SYS_I2C_FSL 53 #define CONFIG_SYS_FSL_I2C_SPEED 80000 54 #define CONFIG_SYS_FSL_I2C_SLAVE 0x7F 55 #define CONFIG_SYS_FSL_I2C_OFFSET 0x58000 56 #define CONFIG_SYS_IMMR CONFIG_SYS_MBAR 57 58 #define CONFIG_UDP_CHECKSUM 59 60 #ifdef CONFIG_MCFFEC 61 # define CONFIG_IPADDR 192.162.1.2 62 # define CONFIG_NETMASK 255.255.255.0 63 # define CONFIG_SERVERIP 192.162.1.1 64 # define CONFIG_GATEWAYIP 192.162.1.1 65 #endif /* CONFIG_MCFFEC */ 66 67 #define CONFIG_HOSTNAME M5208EVBe 68 #define CONFIG_EXTRA_ENV_SETTINGS \ 69 "netdev=eth0\0" \ 70 "loadaddr=40010000\0" \ 71 "u-boot=u-boot.bin\0" \ 72 "load=tftp ${loadaddr) ${u-boot}\0" \ 73 "upd=run load; run prog\0" \ 74 "prog=prot off 0 3ffff;" \ 75 "era 0 3ffff;" \ 76 "cp.b ${loadaddr} 0 ${filesize};" \ 77 "save\0" \ 78 "" 79 80 #define CONFIG_PRAM 512 /* 512 KB */ 81 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 82 83 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 84 #define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */ 85 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buf Sz */ 86 #define CONFIG_SYS_LOAD_ADDR 0x40010000 87 88 #define CONFIG_SYS_CLK 166666666 /* CPU Core Clock */ 89 #define CONFIG_SYS_PLL_ODR 0x36 90 #define CONFIG_SYS_PLL_FDR 0x7D 91 92 #define CONFIG_SYS_MBAR 0xFC000000 93 94 /* 95 * Low Level Configuration Settings 96 * (address mappings, register initial values, etc.) 97 * You should know what you are doing if you make changes here. 98 */ 99 /* Definitions for initial stack pointer and data area (in DPRAM) */ 100 #define CONFIG_SYS_INIT_RAM_ADDR 0x80000000 101 #define CONFIG_SYS_INIT_RAM_SIZE 0x4000 /* Size of used area in internal SRAM */ 102 #define CONFIG_SYS_INIT_RAM_CTRL 0x221 103 #define CONFIG_SYS_GBL_DATA_OFFSET ((CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) - 0x10) 104 #define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET 105 106 /* 107 * Start addresses for the final memory configuration 108 * (Set up by the startup code) 109 * Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0 110 */ 111 #define CONFIG_SYS_SDRAM_BASE 0x40000000 112 #define CONFIG_SYS_SDRAM_SIZE 32 /* SDRAM size in MB */ 113 #define CONFIG_SYS_SDRAM_CFG1 0x43711630 114 #define CONFIG_SYS_SDRAM_CFG2 0x56670000 115 #define CONFIG_SYS_SDRAM_CTRL 0xE1002000 116 #define CONFIG_SYS_SDRAM_EMOD 0x80010000 117 #define CONFIG_SYS_SDRAM_MODE 0x00CD0000 118 119 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE + 0x400 120 #define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20) 121 122 #define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400) 123 #define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */ 124 125 #define CONFIG_SYS_BOOTPARAMS_LEN 64*1024 126 #define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */ 127 128 /* 129 * For booting Linux, the board info and command line data 130 * have to be in the first 8 MB of memory, since this is 131 * the maximum mapped by the Linux kernel during initialization ?? 132 */ 133 #define CONFIG_SYS_BOOTMAPSZ (CONFIG_SYS_SDRAM_BASE + (CONFIG_SYS_SDRAM_SIZE << 20)) 134 #define CONFIG_SYS_BOOTM_LEN (CONFIG_SYS_SDRAM_SIZE << 20) 135 136 /* FLASH organization */ 137 #define CONFIG_SYS_FLASH_CFI 138 #ifdef CONFIG_SYS_FLASH_CFI 139 # define CONFIG_FLASH_CFI_DRIVER 1 140 # define CONFIG_SYS_FLASH_SIZE 0x800000 /* Max size that the board might have */ 141 # define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 142 # define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 143 # define CONFIG_SYS_MAX_FLASH_SECT 254 /* max number of sectors on one chip */ 144 # define CONFIG_SYS_FLASH_PROTECTION /* "Real" (hardware) sectors protection */ 145 #endif 146 147 #define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE 148 149 /* 150 * Configuration for environment 151 * Environment is embedded in u-boot in the second sector of the flash 152 */ 153 #define CONFIG_ENV_OFFSET 0x2000 154 #define CONFIG_ENV_SIZE 0x1000 155 #define CONFIG_ENV_SECT_SIZE 0x2000 156 157 #define LDS_BOARD_TEXT \ 158 . = DEFINED(env_offset) ? env_offset : .; \ 159 env/embedded.o(.text*); 160 161 /* Cache Configuration */ 162 #define CONFIG_SYS_CACHELINE_SIZE 16 163 164 #define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ 165 CONFIG_SYS_INIT_RAM_SIZE - 8) 166 #define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \ 167 CONFIG_SYS_INIT_RAM_SIZE - 4) 168 #define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV | CF_CACR_INVI) 169 #define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \ 170 CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \ 171 CF_ACR_EN | CF_ACR_SM_ALL) 172 #define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_CINV | \ 173 CF_CACR_DISD | CF_CACR_INVI | \ 174 CF_CACR_CEIB | CF_CACR_DCM | \ 175 CF_CACR_EUSP) 176 177 /* Chipselect bank definitions */ 178 /* 179 * CS0 - NOR Flash 180 * CS1 - Available 181 * CS2 - Available 182 * CS3 - Available 183 * CS4 - Available 184 * CS5 - Available 185 */ 186 #define CONFIG_SYS_CS0_BASE 0 187 #define CONFIG_SYS_CS0_MASK 0x007F0001 188 #define CONFIG_SYS_CS0_CTRL 0x00001FA0 189 190 #endif /* _M5208EVBE_H */ 191