1 /* 2 * (C) Copyright 2000-2009 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef __COMMON_H_ 9 #define __COMMON_H_ 1 10 11 #ifndef __ASSEMBLY__ /* put C only stuff in this section */ 12 13 typedef unsigned char uchar; 14 typedef volatile unsigned long vu_long; 15 typedef volatile unsigned short vu_short; 16 typedef volatile unsigned char vu_char; 17 18 /* Allow sharing constants with type modifiers between C and assembly. */ 19 #define _AC(X, Y) (X##Y) 20 21 #include <config.h> 22 #include <errno.h> 23 #include <time.h> 24 #include <asm-offsets.h> 25 #include <linux/bitops.h> 26 #include <linux/delay.h> 27 #include <linux/types.h> 28 #include <linux/string.h> 29 #include <linux/stringify.h> 30 #include <asm/ptrace.h> 31 #include <stdarg.h> 32 #include <linux/kernel.h> 33 #if defined(CONFIG_8xx) 34 #include <asm/8xx_immap.h> 35 #if defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \ 36 defined(CONFIG_MPC866) || \ 37 defined(CONFIG_MPC866P) 38 # define CONFIG_MPC866_FAMILY 1 39 #elif defined(CONFIG_MPC885) 40 # define CONFIG_MPC885_FAMILY 1 41 #endif 42 #if defined(CONFIG_MPC860) \ 43 || defined(CONFIG_MPC860T) \ 44 || defined(CONFIG_MPC866_FAMILY) \ 45 || defined(CONFIG_MPC885_FAMILY) 46 # define CONFIG_MPC86x 1 47 #endif 48 #elif defined(CONFIG_5xx) 49 #include <asm/5xx_immap.h> 50 #elif defined(CONFIG_MPC5xxx) 51 #include <mpc5xxx.h> 52 #elif defined(CONFIG_MPC512X) 53 #include <asm/immap_512x.h> 54 #elif defined(CONFIG_MPC8260) 55 #if defined(CONFIG_MPC8247) \ 56 || defined(CONFIG_MPC8272) 57 #define CONFIG_MPC8272_FAMILY 1 58 #endif 59 #include <asm/immap_8260.h> 60 #endif 61 #ifdef CONFIG_MPC86xx 62 #include <mpc86xx.h> 63 #include <asm/immap_86xx.h> 64 #endif 65 #ifdef CONFIG_MPC85xx 66 #include <mpc85xx.h> 67 #include <asm/immap_85xx.h> 68 #endif 69 #ifdef CONFIG_MPC83xx 70 #include <mpc83xx.h> 71 #include <asm/immap_83xx.h> 72 #endif 73 #ifdef CONFIG_4xx 74 #include <asm/ppc4xx.h> 75 #endif 76 #ifdef CONFIG_SOC_DA8XX 77 #include <asm/arch/hardware.h> 78 #endif 79 #ifdef CONFIG_FSL_LSCH3 80 #include <asm/arch/immap_lsch3.h> 81 #endif 82 #ifdef CONFIG_FSL_LSCH2 83 #include <asm/arch/immap_lsch2.h> 84 #endif 85 86 #include <part.h> 87 #include <flash.h> 88 #include <image.h> 89 90 /* Bring in printf format macros if inttypes.h is included */ 91 #define __STDC_FORMAT_MACROS 92 93 #ifdef __LP64__ 94 #define CONFIG_SYS_SUPPORT_64BIT_DATA 95 #endif 96 97 #ifdef DEBUG 98 #define _DEBUG 1 99 #else 100 #define _DEBUG 0 101 #endif 102 103 #ifdef CONFIG_SPL_BUILD 104 #define _SPL_BUILD 1 105 #else 106 #define _SPL_BUILD 0 107 #endif 108 109 /* Define this at the top of a file to add a prefix to debug messages */ 110 #ifndef pr_fmt 111 #define pr_fmt(fmt) fmt 112 #endif 113 114 /* 115 * Output a debug text when condition "cond" is met. The "cond" should be 116 * computed by a preprocessor in the best case, allowing for the best 117 * optimization. 118 */ 119 #define debug_cond(cond, fmt, args...) \ 120 do { \ 121 if (cond) \ 122 printf(pr_fmt(fmt), ##args); \ 123 } while (0) 124 125 /* Show a message if DEBUG is defined in a file */ 126 #define debug(fmt, args...) \ 127 debug_cond(_DEBUG, fmt, ##args) 128 129 /* Show a message if not in SPL */ 130 #define warn_non_spl(fmt, args...) \ 131 debug_cond(!_SPL_BUILD, fmt, ##args) 132 133 /* 134 * An assertion is run-time check done in debug mode only. If DEBUG is not 135 * defined then it is skipped. If DEBUG is defined and the assertion fails, 136 * then it calls panic*( which may or may not reset/halt U-Boot (see 137 * CONFIG_PANIC_HANG), It is hoped that all failing assertions are found 138 * before release, and after release it is hoped that they don't matter. But 139 * in any case these failing assertions cannot be fixed with a reset (which 140 * may just do the same assertion again). 141 */ 142 void __assert_fail(const char *assertion, const char *file, unsigned line, 143 const char *function); 144 #define assert(x) \ 145 ({ if (!(x) && _DEBUG) \ 146 __assert_fail(#x, __FILE__, __LINE__, __func__); }) 147 148 #define error(fmt, args...) do { \ 149 printf("ERROR: " pr_fmt(fmt) "\nat %s:%d/%s()\n", \ 150 ##args, __FILE__, __LINE__, __func__); \ 151 } while (0) 152 153 #ifndef BUG 154 #define BUG() do { \ 155 printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \ 156 panic("BUG!"); \ 157 } while (0) 158 #define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0) 159 #endif /* BUG */ 160 161 typedef void (interrupt_handler_t)(void *); 162 163 #include <asm/u-boot.h> /* boot information for Linux kernel */ 164 #include <asm/global_data.h> /* global data used for startup functions */ 165 166 /* 167 * enable common handling for all TQM8xxL/M boards: 168 * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards 169 * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards 170 * and for the TQM885D board 171 */ 172 #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \ 173 defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \ 174 defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M) 175 # ifndef CONFIG_TQM8xxM 176 # define CONFIG_TQM8xxM 177 # endif 178 #endif 179 #if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \ 180 defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \ 181 defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \ 182 defined(CONFIG_TQM885D) 183 # ifndef CONFIG_TQM8xxL 184 # define CONFIG_TQM8xxL 185 # endif 186 #endif 187 188 #if defined(CONFIG_ENV_IS_EMBEDDED) 189 #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN 190 #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \ 191 (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \ 192 defined(CONFIG_ENV_IS_IN_NVRAM) 193 #define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE) 194 #else 195 #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN 196 #endif 197 198 /* 199 * Function Prototypes 200 */ 201 int dram_init(void); 202 203 /** 204 * dram_init_banksize() - Set up DRAM bank sizes 205 * 206 * This can be implemented by boards to set up the DRAM bank information in 207 * gd->bd->bi_dram(). It is called just before relocation, after dram_init() 208 * is called. 209 * 210 * If this is not provided, a default implementation will try to set up a 211 * single bank. It will do this if CONFIG_NR_DRAM_BANKS and 212 * CONFIG_SYS_SDRAM_BASE are set. The bank will have a start address of 213 * CONFIG_SYS_SDRAM_BASE and the size will be determined by a call to 214 * get_effective_memsize(). 215 * 216 * @return 0 if OK, -ve on error 217 */ 218 int dram_init_banksize(void); 219 220 void hang (void) __attribute__ ((noreturn)); 221 222 int timer_init(void); 223 int cpu_init(void); 224 225 #include <display_options.h> 226 227 /* common/main.c */ 228 void main_loop (void); 229 int run_command(const char *cmd, int flag); 230 int run_command_repeatable(const char *cmd, int flag); 231 232 /** 233 * Run a list of commands separated by ; or even \0 234 * 235 * Note that if 'len' is not -1, then the command does not need to be nul 236 * terminated, Memory will be allocated for the command in that case. 237 * 238 * @param cmd List of commands to run, each separated bu semicolon 239 * @param len Length of commands excluding terminator if known (-1 if not) 240 * @param flag Execution flags (CMD_FLAG_...) 241 * @return 0 on success, or != 0 on error. 242 */ 243 int run_command_list(const char *cmd, int len, int flag); 244 245 /* arch/$(ARCH)/lib/board.c */ 246 void board_init_f(ulong); 247 void board_init_r(gd_t *, ulong) __attribute__ ((noreturn)); 248 249 /** 250 * ulong board_init_f_alloc_reserve - allocate reserved area 251 * 252 * This function is called by each architecture very early in the start-up 253 * code to allow the C runtime to reserve space on the stack for writable 254 * 'globals' such as GD and the malloc arena. 255 * 256 * @top: top of the reserve area, growing down. 257 * @return: bottom of reserved area 258 */ 259 ulong board_init_f_alloc_reserve(ulong top); 260 261 /** 262 * board_init_f_init_reserve - initialize the reserved area(s) 263 * 264 * This function is called once the C runtime has allocated the reserved 265 * area on the stack. It must initialize the GD at the base of that area. 266 * 267 * @base: top from which reservation was done 268 */ 269 void board_init_f_init_reserve(ulong base); 270 271 /** 272 * arch_setup_gd() - Set up the global_data pointer 273 * 274 * This pointer is special in some architectures and cannot easily be assigned 275 * to. For example on x86 it is implemented by adding a specific record to its 276 * Global Descriptor Table! So we we provide a function to carry out this task. 277 * For most architectures this can simply be: 278 * 279 * gd = gd_ptr; 280 * 281 * @gd_ptr: Pointer to global data 282 */ 283 void arch_setup_gd(gd_t *gd_ptr); 284 285 int checkboard(void); 286 int show_board_info(void); 287 int checkflash(void); 288 int checkdram(void); 289 int last_stage_init(void); 290 extern ulong monitor_flash_len; 291 int mac_read_from_eeprom(void); 292 extern u8 __dtb_dt_begin[]; /* embedded device tree blob */ 293 int set_cpu_clk_info(void); 294 int mdm_init(void); 295 int print_cpuinfo(void); 296 int update_flash_size(int flash_size); 297 int arch_early_init_r(void); 298 299 /* 300 * setup_board_extra() - Fill in extra details in the bd_t structure 301 * 302 * @return 0 if OK, -ve on error 303 */ 304 int setup_board_extra(void); 305 306 /** 307 * arch_fsp_init() - perform firmware support package init 308 * 309 * Where U-Boot relies on binary blobs to handle part of the system init, this 310 * function can be used to set up the blobs. This is used on some Intel 311 * platforms. 312 */ 313 int arch_fsp_init(void); 314 315 /** 316 * arch_cpu_init_dm() - init CPU after driver model is available 317 * 318 * This is called immediately after driver model is available before 319 * relocation. This is similar to arch_cpu_init() but is able to reference 320 * devices 321 * 322 * @return 0 if OK, -ve on error 323 */ 324 int arch_cpu_init_dm(void); 325 326 /** 327 * Reserve all necessary stacks 328 * 329 * This is used in generic board init sequence in common/board_f.c. Each 330 * architecture could provide this function to tailor the required stacks. 331 * 332 * On entry gd->start_addr_sp is pointing to the suggested top of the stack. 333 * The callee ensures gd->start_add_sp is 16-byte aligned, so architectures 334 * require only this can leave it untouched. 335 * 336 * On exit gd->start_addr_sp and gd->irq_sp should be set to the respective 337 * positions of the stack. The stack pointer(s) will be set to this later. 338 * gd->irq_sp is only required, if the architecture needs it. 339 * 340 * @return 0 if no error 341 */ 342 __weak int arch_reserve_stacks(void); 343 344 /** 345 * Show the DRAM size in a board-specific way 346 * 347 * This is used by boards to display DRAM information in their own way. 348 * 349 * @param size Size of DRAM (which should be displayed along with other info) 350 */ 351 void board_show_dram(phys_size_t size); 352 353 /** 354 * arch_fixup_fdt() - Write arch-specific information to fdt 355 * 356 * Defined in arch/$(ARCH)/lib/bootm-fdt.c 357 * 358 * @blob: FDT blob to write to 359 * @return 0 if ok, or -ve FDT_ERR_... on failure 360 */ 361 int arch_fixup_fdt(void *blob); 362 363 /* common/flash.c */ 364 void flash_perror (int); 365 366 /* common/cmd_source.c */ 367 int source (ulong addr, const char *fit_uname); 368 369 extern ulong load_addr; /* Default Load Address */ 370 extern ulong save_addr; /* Default Save Address */ 371 extern ulong save_size; /* Default Save Size */ 372 373 /* common/cmd_net.c */ 374 int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); 375 376 /* common/cmd_fat.c */ 377 int do_fat_fsload(cmd_tbl_t *, int, int, char * const []); 378 379 /* common/cmd_ext2.c */ 380 int do_ext2load(cmd_tbl_t *, int, int, char * const []); 381 382 /* common/cmd_nvedit.c */ 383 int env_init (void); 384 void env_relocate (void); 385 int envmatch (uchar *, int); 386 387 /* Avoid unfortunate conflict with libc's getenv() */ 388 #ifdef CONFIG_SANDBOX 389 #define getenv uboot_getenv 390 #endif 391 char *getenv (const char *); 392 int getenv_f (const char *name, char *buf, unsigned len); 393 ulong getenv_ulong(const char *name, int base, ulong default_val); 394 395 /** 396 * getenv_hex() - Return an environment variable as a hex value 397 * 398 * Decode an environment as a hex number (it may or may not have a 0x 399 * prefix). If the environment variable cannot be found, or does not start 400 * with hex digits, the default value is returned. 401 * 402 * @varname: Variable to decode 403 * @default_val: Value to return on error 404 */ 405 ulong getenv_hex(const char *varname, ulong default_val); 406 407 /* 408 * Read an environment variable as a boolean 409 * Return -1 if variable does not exist (default to true) 410 */ 411 int getenv_yesno(const char *var); 412 int saveenv (void); 413 int setenv (const char *, const char *); 414 int setenv_ulong(const char *varname, ulong value); 415 int setenv_hex(const char *varname, ulong value); 416 /** 417 * setenv_addr - Set an environment variable to an address in hex 418 * 419 * @varname: Environment variable to set 420 * @addr: Value to set it to 421 * @return 0 if ok, 1 on error 422 */ 423 static inline int setenv_addr(const char *varname, const void *addr) 424 { 425 return setenv_hex(varname, (ulong)addr); 426 } 427 428 #ifdef CONFIG_ARM 429 # include <asm/mach-types.h> 430 # include <asm/setup.h> 431 # include <asm/u-boot.h> 432 #endif /* CONFIG_ARM */ 433 #ifdef CONFIG_X86 434 # include <asm/u-boot.h> 435 #endif /* CONFIG_X86 */ 436 #ifdef CONFIG_SANDBOX 437 # include <asm/u-boot.h> 438 #endif 439 #ifdef CONFIG_NDS32 440 # include <asm/mach-types.h> 441 # include <asm/setup.h> 442 # include <asm/u-boot.h> 443 #endif /* CONFIG_NDS32 */ 444 #ifdef CONFIG_MIPS 445 # include <asm/u-boot.h> 446 #endif /* CONFIG_MIPS */ 447 448 #ifdef CONFIG_AUTO_COMPLETE 449 int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf); 450 #endif 451 int get_env_id (void); 452 453 void pci_init (void); 454 void pci_init_board(void); 455 456 int misc_init_f (void); 457 int misc_init_r (void); 458 459 /* common/exports.c */ 460 void jumptable_init(void); 461 462 /* common/kallsysm.c */ 463 const char *symbol_lookup(unsigned long addr, unsigned long *caddr); 464 465 /* common/memsize.c */ 466 long get_ram_size (long *, long); 467 phys_size_t get_effective_memsize(void); 468 469 /* $(BOARD)/$(BOARD).c */ 470 void reset_phy (void); 471 void fdc_hw_init (void); 472 473 /* $(BOARD)/eeprom.c */ 474 #ifdef CONFIG_CMD_EEPROM 475 void eeprom_init (int bus); 476 int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); 477 int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); 478 #else 479 /* 480 * Some EEPROM code is depecated because it used the legacy I2C interface. Add 481 * some macros here so we don't have to touch every one of those uses 482 */ 483 #define eeprom_init(bus) 484 #define eeprom_read(dev_addr, offset, buffer, cnt) ((void)-ENOSYS) 485 #define eeprom_write(dev_addr, offset, buffer, cnt) ((void)-ENOSYS) 486 #endif 487 488 /* 489 * Set this up regardless of board 490 * type, to prevent errors. 491 */ 492 #if defined(CONFIG_SPI) || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) 493 # define CONFIG_SYS_DEF_EEPROM_ADDR 0 494 #else 495 #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) 496 # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR 497 #endif 498 #endif /* CONFIG_SPI || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) */ 499 500 #if defined(CONFIG_SPI) 501 extern void spi_init_f (void); 502 extern void spi_init_r (void); 503 extern ssize_t spi_read (uchar *, int, uchar *, int); 504 extern ssize_t spi_write (uchar *, int, uchar *, int); 505 #endif 506 507 /* $(BOARD)/$(BOARD).c */ 508 int board_early_init_f (void); 509 int board_fix_fdt (void *rw_fdt_blob); /* manipulate the U-Boot fdt before its relocation */ 510 int board_late_init (void); 511 int board_postclk_init (void); /* after clocks/timebase, before env/serial */ 512 int board_early_init_r (void); 513 void board_poweroff (void); 514 515 #if defined(CONFIG_SYS_DRAM_TEST) 516 int testdram(void); 517 #endif /* CONFIG_SYS_DRAM_TEST */ 518 519 /* $(CPU)/start.S */ 520 #if defined(CONFIG_5xx) || \ 521 defined(CONFIG_8xx) 522 uint get_immr (uint); 523 #endif 524 #if defined(CONFIG_MPC5xxx) 525 uint get_svr (void); 526 #endif 527 uint get_pvr (void); 528 uint get_svr (void); 529 uint rd_ic_cst (void); 530 void wr_ic_cst (uint); 531 void wr_ic_adr (uint); 532 uint rd_dc_cst (void); 533 void wr_dc_cst (uint); 534 void wr_dc_adr (uint); 535 int icache_status (void); 536 void icache_enable (void); 537 void icache_disable(void); 538 int dcache_status (void); 539 void dcache_enable (void); 540 void dcache_disable(void); 541 void mmu_disable(void); 542 #if defined(CONFIG_ARM) 543 void relocate_code(ulong); 544 #else 545 void relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn)); 546 #endif 547 ulong get_endaddr (void); 548 void trap_init (ulong); 549 #if defined (CONFIG_4xx) || \ 550 defined (CONFIG_MPC5xxx) || \ 551 defined (CONFIG_MPC85xx) || \ 552 defined (CONFIG_MPC86xx) || \ 553 defined (CONFIG_MPC83xx) 554 unsigned char in8(unsigned int); 555 void out8(unsigned int, unsigned char); 556 unsigned short in16(unsigned int); 557 unsigned short in16r(unsigned int); 558 void out16(unsigned int, unsigned short value); 559 void out16r(unsigned int, unsigned short value); 560 unsigned long in32(unsigned int); 561 unsigned long in32r(unsigned int); 562 void out32(unsigned int, unsigned long value); 563 void out32r(unsigned int, unsigned long value); 564 void ppcDcbf(unsigned long value); 565 void ppcDcbi(unsigned long value); 566 void ppcSync(void); 567 void ppcDcbz(unsigned long value); 568 #endif 569 #if defined (CONFIG_MICROBLAZE) 570 unsigned short in16(unsigned int); 571 void out16(unsigned int, unsigned short value); 572 #endif 573 574 #if defined (CONFIG_MPC83xx) 575 void ppcDWload(unsigned int *addr, unsigned int *ret); 576 void ppcDWstore(unsigned int *addr, unsigned int *value); 577 void disable_addr_trans(void); 578 void enable_addr_trans(void); 579 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) 580 void ddr_enable_ecc(unsigned int dram_size); 581 #endif 582 #endif 583 584 /* $(CPU)/cpu.c */ 585 static inline int cpumask_next(int cpu, unsigned int mask) 586 { 587 for (cpu++; !((1 << cpu) & mask); cpu++) 588 ; 589 590 return cpu; 591 } 592 593 #define for_each_cpu(iter, cpu, num_cpus, mask) \ 594 for (iter = 0, cpu = cpumask_next(-1, mask); \ 595 iter < num_cpus; \ 596 iter++, cpu = cpumask_next(cpu, mask)) \ 597 598 int cpu_numcores (void); 599 int cpu_num_dspcores(void); 600 u32 cpu_mask (void); 601 u32 cpu_dsp_mask(void); 602 int is_core_valid (unsigned int); 603 604 /** 605 * arch_cpu_init() - basic cpu-dependent setup for an architecture 606 * 607 * This is called after early malloc is available. It should handle any 608 * CPU- or SoC- specific init needed to continue the init sequence. See 609 * board_f.c for where it is called. If this is not provided, a default 610 * version (which does nothing) will be used. 611 */ 612 int arch_cpu_init(void); 613 614 int checkcpu (void); 615 int checkicache (void); 616 int checkdcache (void); 617 void upmconfig (unsigned int, unsigned int *, unsigned int); 618 ulong get_tbclk (void); 619 void reset_misc (void); 620 void reset_cpu (ulong addr); 621 void ft_cpu_setup(void *blob, bd_t *bd); 622 void ft_pci_setup(void *blob, bd_t *bd); 623 624 void smp_set_core_boot_addr(unsigned long addr, int corenr); 625 void smp_kick_all_cpus(void); 626 627 /* $(CPU)/serial.c */ 628 int serial_init (void); 629 void serial_setbrg (void); 630 void serial_putc (const char); 631 void serial_putc_raw(const char); 632 void serial_puts (const char *); 633 int serial_getc (void); 634 int serial_tstc (void); 635 636 /* These versions take a stdio_dev pointer */ 637 struct stdio_dev; 638 int serial_stub_getc(struct stdio_dev *sdev); 639 int serial_stub_tstc(struct stdio_dev *sdev); 640 641 /* $(CPU)/speed.c */ 642 int get_clocks (void); 643 #if defined(CONFIG_MPC5xxx) 644 int prt_mpc5xxx_clks (void); 645 #endif 646 #if defined(CONFIG_LH7A40X) || \ 647 defined(CONFIG_EP93XX) 648 ulong get_FCLK (void); 649 ulong get_HCLK (void); 650 ulong get_PCLK (void); 651 ulong get_UCLK (void); 652 #endif 653 #if defined(CONFIG_LH7A40X) 654 ulong get_PLLCLK (void); 655 #endif 656 #if defined(CONFIG_IMX) 657 ulong get_systemPLLCLK(void); 658 ulong get_FCLK(void); 659 ulong get_HCLK(void); 660 ulong get_BCLK(void); 661 ulong get_PERCLK1(void); 662 ulong get_PERCLK2(void); 663 ulong get_PERCLK3(void); 664 #endif 665 ulong get_bus_freq (ulong); 666 int get_serial_clock(void); 667 668 #if defined(CONFIG_MPC85xx) 669 typedef MPC85xx_SYS_INFO sys_info_t; 670 void get_sys_info ( sys_info_t * ); 671 void ft_fixup_cpu(void *, u64); 672 void ft_fixup_num_cores(void *); 673 #endif 674 #if defined(CONFIG_MPC86xx) 675 typedef MPC86xx_SYS_INFO sys_info_t; 676 void get_sys_info ( sys_info_t * ); 677 static inline ulong get_ddr_freq(ulong dummy) 678 { 679 return get_bus_freq(dummy); 680 } 681 #else 682 ulong get_ddr_freq(ulong); 683 #endif 684 685 #if defined(CONFIG_4xx) 686 # if defined(CONFIG_440) 687 # if defined(CONFIG_440SPE) 688 unsigned long determine_sysper(void); 689 unsigned long determine_pci_clock_per(void); 690 # endif 691 # endif 692 typedef PPC4xx_SYS_INFO sys_info_t; 693 int ppc440spe_revB(void); 694 void get_sys_info ( sys_info_t * ); 695 #endif 696 697 /* $(CPU)/cpu_init.c */ 698 #if defined(CONFIG_8xx) || defined(CONFIG_MPC8260) 699 void cpu_init_f (volatile immap_t *immr); 700 #endif 701 #if defined(CONFIG_4xx) || defined(CONFIG_MCF52x2) || defined(CONFIG_MPC86xx) 702 void cpu_init_f (void); 703 #endif 704 #ifdef CONFIG_MPC85xx 705 ulong cpu_init_f(void); 706 #endif 707 708 int cpu_init_r (void); 709 710 /* $(CPU)/interrupts.c */ 711 int interrupt_init (void); 712 void timer_interrupt (struct pt_regs *); 713 void external_interrupt (struct pt_regs *); 714 void irq_install_handler(int, interrupt_handler_t *, void *); 715 void irq_free_handler (int); 716 void reset_timer (void); 717 718 /* Return value of monotonic microsecond timer */ 719 unsigned long timer_get_us(void); 720 721 void enable_interrupts (void); 722 int disable_interrupts (void); 723 724 /* $(CPU)/.../commproc.c */ 725 int dpram_init (void); 726 uint dpram_base(void); 727 uint dpram_base_align(uint align); 728 uint dpram_alloc(uint size); 729 uint dpram_alloc_align(uint size,uint align); 730 void bootcount_store (ulong); 731 ulong bootcount_load (void); 732 #define BOOTCOUNT_MAGIC 0xB001C041 733 734 /* $(CPU)/.../<eth> */ 735 void mii_init (void); 736 737 /* $(CPU)/.../lcd.c */ 738 ulong lcd_setmem (ulong); 739 740 /* $(CPU)/.../video.c */ 741 ulong video_setmem (ulong); 742 743 /* arch/$(ARCH)/lib/cache.c */ 744 void enable_caches(void); 745 void flush_cache (unsigned long, unsigned long); 746 void flush_dcache_all(void); 747 void flush_dcache_range(unsigned long start, unsigned long stop); 748 void invalidate_dcache_range(unsigned long start, unsigned long stop); 749 void invalidate_dcache_all(void); 750 void invalidate_icache_all(void); 751 752 enum { 753 /* Disable caches (else flush caches but leave them active) */ 754 CBL_DISABLE_CACHES = 1 << 0, 755 CBL_SHOW_BOOTSTAGE_REPORT = 1 << 1, 756 757 CBL_ALL = 3, 758 }; 759 760 /** 761 * Clean up ready for linux 762 * 763 * @param flags Flags to control what is done 764 */ 765 int cleanup_before_linux_select(int flags); 766 767 /* arch/$(ARCH)/lib/ticks.S */ 768 uint64_t get_ticks(void); 769 void wait_ticks (unsigned long); 770 771 /* arch/$(ARCH)/lib/time.c */ 772 ulong usec2ticks (unsigned long usec); 773 ulong ticks2usec (unsigned long ticks); 774 775 /* lib/gunzip.c */ 776 int gunzip(void *, int, unsigned char *, unsigned long *); 777 int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp, 778 int stoponerr, int offset); 779 780 /** 781 * gzwrite progress indicators: defined weak to allow board-specific 782 * overrides: 783 * 784 * gzwrite_progress_init called on startup 785 * gzwrite_progress called during decompress/write loop 786 * gzwrite_progress_finish called at end of loop to 787 * indicate success (retcode=0) or failure 788 */ 789 void gzwrite_progress_init(u64 expected_size); 790 791 void gzwrite_progress(int iteration, 792 u64 bytes_written, 793 u64 total_bytes); 794 795 void gzwrite_progress_finish(int retcode, 796 u64 totalwritten, 797 u64 totalsize, 798 u32 expected_crc, 799 u32 calculated_crc); 800 801 /** 802 * decompress and write gzipped image from memory to block device 803 * 804 * @param src compressed image address 805 * @param len compressed image length in bytes 806 * @param dev block device descriptor 807 * @param szwritebuf bytes per write (pad to erase size) 808 * @param startoffs offset in bytes of first write 809 * @param szexpected expected uncompressed length 810 * may be zero to use gzip trailer 811 * for files under 4GiB 812 */ 813 int gzwrite(unsigned char *src, int len, 814 struct blk_desc *dev, 815 unsigned long szwritebuf, 816 u64 startoffs, 817 u64 szexpected); 818 819 /* lib/lz4_wrapper.c */ 820 int ulz4fn(const void *src, size_t srcn, void *dst, size_t *dstn); 821 822 /* lib/qsort.c */ 823 void qsort(void *base, size_t nmemb, size_t size, 824 int(*compar)(const void *, const void *)); 825 int strcmp_compar(const void *, const void *); 826 827 /* lib/uuid.c */ 828 #include <uuid.h> 829 830 /* lib/vsprintf.c */ 831 #include <vsprintf.h> 832 833 /* lib/strmhz.c */ 834 char * strmhz(char *buf, unsigned long hz); 835 836 /* lib/crc32.c */ 837 #include <u-boot/crc.h> 838 839 /* lib/rand.c */ 840 #define RAND_MAX -1U 841 void srand(unsigned int seed); 842 unsigned int rand(void); 843 unsigned int rand_r(unsigned int *seedp); 844 845 /* 846 * STDIO based functions (can always be used) 847 */ 848 /* serial stuff */ 849 int serial_printf (const char *fmt, ...) 850 __attribute__ ((format (__printf__, 1, 2))); 851 /* stdin */ 852 int getc(void); 853 int tstc(void); 854 855 /* stdout */ 856 #if !defined(CONFIG_SPL_BUILD) || \ 857 (defined(CONFIG_TPL_BUILD) && defined(CONFIG_TPL_SERIAL_SUPPORT)) || \ 858 (defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD) && \ 859 defined(CONFIG_SPL_SERIAL_SUPPORT)) 860 void putc(const char c); 861 void puts(const char *s); 862 int printf(const char *fmt, ...) 863 __attribute__ ((format (__printf__, 1, 2))); 864 int vprintf(const char *fmt, va_list args); 865 #else 866 #define putc(...) do { } while (0) 867 #define puts(...) do { } while (0) 868 #define printf(...) do { } while (0) 869 #define vprintf(...) do { } while (0) 870 #endif 871 872 /* stderr */ 873 #define eputc(c) fputc(stderr, c) 874 #define eputs(s) fputs(stderr, s) 875 #define eprintf(fmt,args...) fprintf(stderr,fmt ,##args) 876 877 /* 878 * FILE based functions (can only be used AFTER relocation!) 879 */ 880 #define stdin 0 881 #define stdout 1 882 #define stderr 2 883 #define MAX_FILES 3 884 885 int fprintf(int file, const char *fmt, ...) 886 __attribute__ ((format (__printf__, 2, 3))); 887 void fputs(int file, const char *s); 888 void fputc(int file, const char c); 889 int ftstc(int file); 890 int fgetc(int file); 891 892 /* lib/gzip.c */ 893 int gzip(void *dst, unsigned long *lenp, 894 unsigned char *src, unsigned long srclen); 895 int zzip(void *dst, unsigned long *lenp, unsigned char *src, 896 unsigned long srclen, int stoponerr, 897 int (*func)(unsigned long, unsigned long)); 898 899 /* lib/net_utils.c */ 900 #include <net.h> 901 static inline struct in_addr getenv_ip(char *var) 902 { 903 return string_to_ip(getenv(var)); 904 } 905 906 int pcmcia_init (void); 907 908 #ifdef CONFIG_LED_STATUS 909 # include <status_led.h> 910 #endif 911 912 #include <bootstage.h> 913 914 #ifdef CONFIG_SHOW_ACTIVITY 915 void show_activity(int arg); 916 #endif 917 918 /* Multicore arch functions */ 919 #ifdef CONFIG_MP 920 int cpu_status(int nr); 921 int cpu_reset(int nr); 922 int cpu_disable(int nr); 923 int cpu_release(int nr, int argc, char * const argv[]); 924 #endif 925 926 #else /* __ASSEMBLY__ */ 927 928 /* Drop a C type modifier (like in 3UL) for constants used in assembly. */ 929 #define _AC(X, Y) X 930 931 #endif /* __ASSEMBLY__ */ 932 933 #ifdef CONFIG_PPC 934 /* 935 * Has to be included outside of the #ifndef __ASSEMBLY__ section. 936 * Otherwise might lead to compilation errors in assembler files. 937 */ 938 #include <asm/cache.h> 939 #endif 940 941 /* Put only stuff here that the assembler can digest */ 942 943 /* Declare an unsigned long constant digestable both by C and an assembler. */ 944 #define UL(x) _AC(x, UL) 945 946 #ifdef CONFIG_POST 947 #define CONFIG_HAS_POST 948 #ifndef CONFIG_POST_ALT_LIST 949 #define CONFIG_POST_STD_LIST 950 #endif 951 #endif 952 953 #ifdef CONFIG_INIT_CRITICAL 954 #error CONFIG_INIT_CRITICAL is deprecated! 955 #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README. 956 #endif 957 958 #define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1)) 959 960 /* 961 * check_member() - Check the offset of a structure member 962 * 963 * @structure: Name of structure (e.g. global_data) 964 * @member: Name of member (e.g. baudrate) 965 * @offset: Expected offset in bytes 966 */ 967 #define check_member(structure, member, offset) _Static_assert( \ 968 offsetof(struct structure, member) == offset, \ 969 "`struct " #structure "` offset for `" #member "` is not " #offset) 970 971 /* Avoid using CONFIG_EFI_STUB directly as we may boot from other loaders */ 972 #ifdef CONFIG_EFI_STUB 973 #define ll_boot_init() false 974 #else 975 #define ll_boot_init() true 976 #endif 977 978 /* Pull in stuff for the build system */ 979 #ifdef DO_DEPS_ONLY 980 # include <environment.h> 981 #endif 982 983 #endif /* __COMMON_H_ */ 984