1 /* 2 * (C) Copyright 2000-2009 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef __COMMON_H_ 9 #define __COMMON_H_ 1 10 11 #ifndef __ASSEMBLY__ /* put C only stuff in this section */ 12 13 typedef unsigned char uchar; 14 typedef volatile unsigned long vu_long; 15 typedef volatile unsigned short vu_short; 16 typedef volatile unsigned char vu_char; 17 18 /* Allow sharing constants with type modifiers between C and assembly. */ 19 #define _AC(X, Y) (X##Y) 20 21 #include <config.h> 22 #include <errno.h> 23 #include <time.h> 24 #include <asm-offsets.h> 25 #include <linux/bitops.h> 26 #include <linux/delay.h> 27 #include <linux/types.h> 28 #include <linux/string.h> 29 #include <linux/stringify.h> 30 #include <asm/ptrace.h> 31 #include <stdarg.h> 32 #include <linux/kernel.h> 33 #if defined(CONFIG_8xx) 34 #include <asm/8xx_immap.h> 35 #if defined(CONFIG_MPC859) || defined(CONFIG_MPC859T) || \ 36 defined(CONFIG_MPC866) || \ 37 defined(CONFIG_MPC866P) 38 # define CONFIG_MPC866_FAMILY 1 39 #elif defined(CONFIG_MPC885) 40 # define CONFIG_MPC885_FAMILY 1 41 #endif 42 #if defined(CONFIG_MPC860) \ 43 || defined(CONFIG_MPC860T) \ 44 || defined(CONFIG_MPC866_FAMILY) \ 45 || defined(CONFIG_MPC885_FAMILY) 46 # define CONFIG_MPC86x 1 47 #endif 48 #elif defined(CONFIG_5xx) 49 #include <asm/5xx_immap.h> 50 #elif defined(CONFIG_MPC5xxx) 51 #include <mpc5xxx.h> 52 #elif defined(CONFIG_MPC512X) 53 #include <asm/immap_512x.h> 54 #elif defined(CONFIG_MPC8260) 55 #if defined(CONFIG_MPC8247) \ 56 || defined(CONFIG_MPC8272) 57 #define CONFIG_MPC8272_FAMILY 1 58 #endif 59 #include <asm/immap_8260.h> 60 #endif 61 #ifdef CONFIG_MPC86xx 62 #include <mpc86xx.h> 63 #include <asm/immap_86xx.h> 64 #endif 65 #ifdef CONFIG_MPC85xx 66 #include <mpc85xx.h> 67 #include <asm/immap_85xx.h> 68 #endif 69 #ifdef CONFIG_MPC83xx 70 #include <mpc83xx.h> 71 #include <asm/immap_83xx.h> 72 #endif 73 #ifdef CONFIG_4xx 74 #include <asm/ppc4xx.h> 75 #endif 76 #ifdef CONFIG_SOC_DA8XX 77 #include <asm/arch/hardware.h> 78 #endif 79 #ifdef CONFIG_FSL_LSCH3 80 #include <asm/arch/immap_lsch3.h> 81 #endif 82 #ifdef CONFIG_FSL_LSCH2 83 #include <asm/arch/immap_lsch2.h> 84 #endif 85 86 #include <part.h> 87 #include <flash.h> 88 #include <image.h> 89 90 /* Bring in printf format macros if inttypes.h is included */ 91 #define __STDC_FORMAT_MACROS 92 93 #ifdef __LP64__ 94 #define CONFIG_SYS_SUPPORT_64BIT_DATA 95 #endif 96 97 #ifdef DEBUG 98 #define _DEBUG 1 99 #else 100 #define _DEBUG 0 101 #endif 102 103 #ifdef CONFIG_SPL_BUILD 104 #define _SPL_BUILD 1 105 #else 106 #define _SPL_BUILD 0 107 #endif 108 109 /* Define this at the top of a file to add a prefix to debug messages */ 110 #ifndef pr_fmt 111 #define pr_fmt(fmt) fmt 112 #endif 113 114 /* 115 * Output a debug text when condition "cond" is met. The "cond" should be 116 * computed by a preprocessor in the best case, allowing for the best 117 * optimization. 118 */ 119 #define debug_cond(cond, fmt, args...) \ 120 do { \ 121 if (cond) \ 122 printf(pr_fmt(fmt), ##args); \ 123 } while (0) 124 125 /* Show a message if DEBUG is defined in a file */ 126 #define debug(fmt, args...) \ 127 debug_cond(_DEBUG, fmt, ##args) 128 129 /* Show a message if not in SPL */ 130 #define warn_non_spl(fmt, args...) \ 131 debug_cond(!_SPL_BUILD, fmt, ##args) 132 133 /* 134 * An assertion is run-time check done in debug mode only. If DEBUG is not 135 * defined then it is skipped. If DEBUG is defined and the assertion fails, 136 * then it calls panic*( which may or may not reset/halt U-Boot (see 137 * CONFIG_PANIC_HANG), It is hoped that all failing assertions are found 138 * before release, and after release it is hoped that they don't matter. But 139 * in any case these failing assertions cannot be fixed with a reset (which 140 * may just do the same assertion again). 141 */ 142 void __assert_fail(const char *assertion, const char *file, unsigned line, 143 const char *function); 144 #define assert(x) \ 145 ({ if (!(x) && _DEBUG) \ 146 __assert_fail(#x, __FILE__, __LINE__, __func__); }) 147 148 #define error(fmt, args...) do { \ 149 printf("ERROR: " pr_fmt(fmt) "\nat %s:%d/%s()\n", \ 150 ##args, __FILE__, __LINE__, __func__); \ 151 } while (0) 152 153 #ifndef BUG 154 #define BUG() do { \ 155 printf("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __FUNCTION__); \ 156 panic("BUG!"); \ 157 } while (0) 158 #define BUG_ON(condition) do { if (unlikely((condition)!=0)) BUG(); } while(0) 159 #endif /* BUG */ 160 161 typedef void (interrupt_handler_t)(void *); 162 163 #include <asm/u-boot.h> /* boot information for Linux kernel */ 164 #include <asm/global_data.h> /* global data used for startup functions */ 165 166 /* 167 * enable common handling for all TQM8xxL/M boards: 168 * - CONFIG_TQM8xxM will be defined for all TQM8xxM boards 169 * - CONFIG_TQM8xxL will be defined for all TQM8xxL _and_ TQM8xxM boards 170 * and for the TQM885D board 171 */ 172 #if defined(CONFIG_TQM823M) || defined(CONFIG_TQM850M) || \ 173 defined(CONFIG_TQM855M) || defined(CONFIG_TQM860M) || \ 174 defined(CONFIG_TQM862M) || defined(CONFIG_TQM866M) 175 # ifndef CONFIG_TQM8xxM 176 # define CONFIG_TQM8xxM 177 # endif 178 #endif 179 #if defined(CONFIG_TQM823L) || defined(CONFIG_TQM850L) || \ 180 defined(CONFIG_TQM855L) || defined(CONFIG_TQM860L) || \ 181 defined(CONFIG_TQM862L) || defined(CONFIG_TQM8xxM) || \ 182 defined(CONFIG_TQM885D) 183 # ifndef CONFIG_TQM8xxL 184 # define CONFIG_TQM8xxL 185 # endif 186 #endif 187 188 #if defined(CONFIG_ENV_IS_EMBEDDED) 189 #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN 190 #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \ 191 (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \ 192 defined(CONFIG_ENV_IS_IN_NVRAM) 193 #define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE) 194 #else 195 #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN 196 #endif 197 198 /* 199 * Function Prototypes 200 */ 201 int dram_init(void); 202 203 /** 204 * dram_init_banksize() - Set up DRAM bank sizes 205 * 206 * This can be implemented by boards to set up the DRAM bank information in 207 * gd->bd->bi_dram(). It is called just before relocation, after dram_init() 208 * is called. 209 * 210 * If this is not provided, a default implementation will try to set up a 211 * single bank. It will do this if CONFIG_NR_DRAM_BANKS and 212 * CONFIG_SYS_SDRAM_BASE are set. The bank will have a start address of 213 * CONFIG_SYS_SDRAM_BASE and the size will be determined by a call to 214 * get_effective_memsize(). 215 * 216 * @return 0 if OK, -ve on error 217 */ 218 int dram_init_banksize(void); 219 220 void hang (void) __attribute__ ((noreturn)); 221 222 int timer_init(void); 223 int cpu_init(void); 224 225 #include <display_options.h> 226 227 /* common/main.c */ 228 void main_loop (void); 229 int run_command(const char *cmd, int flag); 230 int run_command_repeatable(const char *cmd, int flag); 231 232 /** 233 * Run a list of commands separated by ; or even \0 234 * 235 * Note that if 'len' is not -1, then the command does not need to be nul 236 * terminated, Memory will be allocated for the command in that case. 237 * 238 * @param cmd List of commands to run, each separated bu semicolon 239 * @param len Length of commands excluding terminator if known (-1 if not) 240 * @param flag Execution flags (CMD_FLAG_...) 241 * @return 0 on success, or != 0 on error. 242 */ 243 int run_command_list(const char *cmd, int len, int flag); 244 245 /* arch/$(ARCH)/lib/board.c */ 246 void board_init_f(ulong); 247 void board_init_r(gd_t *, ulong) __attribute__ ((noreturn)); 248 249 /** 250 * ulong board_init_f_alloc_reserve - allocate reserved area 251 * 252 * This function is called by each architecture very early in the start-up 253 * code to allow the C runtime to reserve space on the stack for writable 254 * 'globals' such as GD and the malloc arena. 255 * 256 * @top: top of the reserve area, growing down. 257 * @return: bottom of reserved area 258 */ 259 ulong board_init_f_alloc_reserve(ulong top); 260 261 /** 262 * board_init_f_init_reserve - initialize the reserved area(s) 263 * 264 * This function is called once the C runtime has allocated the reserved 265 * area on the stack. It must initialize the GD at the base of that area. 266 * 267 * @base: top from which reservation was done 268 */ 269 void board_init_f_init_reserve(ulong base); 270 271 /** 272 * arch_setup_gd() - Set up the global_data pointer 273 * 274 * This pointer is special in some architectures and cannot easily be assigned 275 * to. For example on x86 it is implemented by adding a specific record to its 276 * Global Descriptor Table! So we we provide a function to carry out this task. 277 * For most architectures this can simply be: 278 * 279 * gd = gd_ptr; 280 * 281 * @gd_ptr: Pointer to global data 282 */ 283 void arch_setup_gd(gd_t *gd_ptr); 284 285 int checkboard(void); 286 int show_board_info(void); 287 int checkflash(void); 288 int checkdram(void); 289 int last_stage_init(void); 290 extern ulong monitor_flash_len; 291 int mac_read_from_eeprom(void); 292 extern u8 __dtb_dt_begin[]; /* embedded device tree blob */ 293 int set_cpu_clk_info(void); 294 int mdm_init(void); 295 int print_cpuinfo(void); 296 int update_flash_size(int flash_size); 297 int arch_early_init_r(void); 298 299 /* 300 * setup_board_extra() - Fill in extra details in the bd_t structure 301 * 302 * @return 0 if OK, -ve on error 303 */ 304 int setup_board_extra(void); 305 306 /** 307 * arch_fsp_init() - perform firmware support package init 308 * 309 * Where U-Boot relies on binary blobs to handle part of the system init, this 310 * function can be used to set up the blobs. This is used on some Intel 311 * platforms. 312 */ 313 int arch_fsp_init(void); 314 315 /** 316 * arch_cpu_init_dm() - init CPU after driver model is available 317 * 318 * This is called immediately after driver model is available before 319 * relocation. This is similar to arch_cpu_init() but is able to reference 320 * devices 321 * 322 * @return 0 if OK, -ve on error 323 */ 324 int arch_cpu_init_dm(void); 325 326 /** 327 * Reserve all necessary stacks 328 * 329 * This is used in generic board init sequence in common/board_f.c. Each 330 * architecture could provide this function to tailor the required stacks. 331 * 332 * On entry gd->start_addr_sp is pointing to the suggested top of the stack. 333 * The callee ensures gd->start_add_sp is 16-byte aligned, so architectures 334 * require only this can leave it untouched. 335 * 336 * On exit gd->start_addr_sp and gd->irq_sp should be set to the respective 337 * positions of the stack. The stack pointer(s) will be set to this later. 338 * gd->irq_sp is only required, if the architecture needs it. 339 * 340 * @return 0 if no error 341 */ 342 __weak int arch_reserve_stacks(void); 343 344 /** 345 * Show the DRAM size in a board-specific way 346 * 347 * This is used by boards to display DRAM information in their own way. 348 * 349 * @param size Size of DRAM (which should be displayed along with other info) 350 */ 351 void board_show_dram(phys_size_t size); 352 353 /** 354 * arch_fixup_fdt() - Write arch-specific information to fdt 355 * 356 * Defined in arch/$(ARCH)/lib/bootm-fdt.c 357 * 358 * @blob: FDT blob to write to 359 * @return 0 if ok, or -ve FDT_ERR_... on failure 360 */ 361 int arch_fixup_fdt(void *blob); 362 363 /* common/flash.c */ 364 void flash_perror (int); 365 366 /* common/cmd_source.c */ 367 int source (ulong addr, const char *fit_uname); 368 369 extern ulong load_addr; /* Default Load Address */ 370 extern ulong save_addr; /* Default Save Address */ 371 extern ulong save_size; /* Default Save Size */ 372 373 /* common/cmd_net.c */ 374 int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); 375 376 /* common/cmd_fat.c */ 377 int do_fat_fsload(cmd_tbl_t *, int, int, char * const []); 378 379 /* common/cmd_ext2.c */ 380 int do_ext2load(cmd_tbl_t *, int, int, char * const []); 381 382 /* common/cmd_nvedit.c */ 383 int env_init (void); 384 void env_relocate (void); 385 int envmatch (uchar *, int); 386 387 /* Avoid unfortunate conflict with libc's getenv() */ 388 #ifdef CONFIG_SANDBOX 389 #define getenv uboot_getenv 390 #endif 391 char *getenv (const char *); 392 int getenv_f (const char *name, char *buf, unsigned len); 393 ulong getenv_ulong(const char *name, int base, ulong default_val); 394 395 /** 396 * getenv_hex() - Return an environment variable as a hex value 397 * 398 * Decode an environment as a hex number (it may or may not have a 0x 399 * prefix). If the environment variable cannot be found, or does not start 400 * with hex digits, the default value is returned. 401 * 402 * @varname: Variable to decode 403 * @default_val: Value to return on error 404 */ 405 ulong getenv_hex(const char *varname, ulong default_val); 406 407 /* 408 * Read an environment variable as a boolean 409 * Return -1 if variable does not exist (default to true) 410 */ 411 int getenv_yesno(const char *var); 412 int saveenv (void); 413 int setenv (const char *, const char *); 414 int setenv_ulong(const char *varname, ulong value); 415 int setenv_hex(const char *varname, ulong value); 416 /** 417 * setenv_addr - Set an environment variable to an address in hex 418 * 419 * @varname: Environment variable to set 420 * @addr: Value to set it to 421 * @return 0 if ok, 1 on error 422 */ 423 static inline int setenv_addr(const char *varname, const void *addr) 424 { 425 return setenv_hex(varname, (ulong)addr); 426 } 427 428 #ifdef CONFIG_ARM 429 # include <asm/mach-types.h> 430 # include <asm/setup.h> 431 # include <asm/u-boot.h> 432 #endif /* CONFIG_ARM */ 433 #ifdef CONFIG_X86 434 # include <asm/u-boot.h> 435 #endif /* CONFIG_X86 */ 436 #ifdef CONFIG_NDS32 437 # include <asm/mach-types.h> 438 # include <asm/setup.h> 439 # include <asm/u-boot.h> 440 #endif /* CONFIG_NDS32 */ 441 442 #ifdef CONFIG_AUTO_COMPLETE 443 int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf); 444 #endif 445 int get_env_id (void); 446 447 void pci_init (void); 448 void pci_init_board(void); 449 450 int misc_init_f (void); 451 int misc_init_r (void); 452 453 /* common/exports.c */ 454 void jumptable_init(void); 455 456 /* common/kallsysm.c */ 457 const char *symbol_lookup(unsigned long addr, unsigned long *caddr); 458 459 /* common/memsize.c */ 460 long get_ram_size (long *, long); 461 phys_size_t get_effective_memsize(void); 462 463 /* $(BOARD)/$(BOARD).c */ 464 void reset_phy (void); 465 void fdc_hw_init (void); 466 467 /* $(BOARD)/eeprom.c */ 468 #ifdef CONFIG_CMD_EEPROM 469 void eeprom_init (int bus); 470 int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); 471 int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); 472 #else 473 /* 474 * Some EEPROM code is depecated because it used the legacy I2C interface. Add 475 * some macros here so we don't have to touch every one of those uses 476 */ 477 #define eeprom_init(bus) 478 #define eeprom_read(dev_addr, offset, buffer, cnt) ((void)-ENOSYS) 479 #define eeprom_write(dev_addr, offset, buffer, cnt) ((void)-ENOSYS) 480 #endif 481 482 /* 483 * Set this up regardless of board 484 * type, to prevent errors. 485 */ 486 #if defined(CONFIG_SPI) || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) 487 # define CONFIG_SYS_DEF_EEPROM_ADDR 0 488 #else 489 #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) 490 # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR 491 #endif 492 #endif /* CONFIG_SPI || !defined(CONFIG_SYS_I2C_EEPROM_ADDR) */ 493 494 #if defined(CONFIG_SPI) 495 extern void spi_init_f (void); 496 extern void spi_init_r (void); 497 extern ssize_t spi_read (uchar *, int, uchar *, int); 498 extern ssize_t spi_write (uchar *, int, uchar *, int); 499 #endif 500 501 /* $(BOARD)/$(BOARD).c */ 502 int board_early_init_f (void); 503 int board_fix_fdt (void *rw_fdt_blob); /* manipulate the U-Boot fdt before its relocation */ 504 int board_late_init (void); 505 int board_postclk_init (void); /* after clocks/timebase, before env/serial */ 506 int board_early_init_r (void); 507 void board_poweroff (void); 508 509 #if defined(CONFIG_SYS_DRAM_TEST) 510 int testdram(void); 511 #endif /* CONFIG_SYS_DRAM_TEST */ 512 513 /* $(CPU)/start.S */ 514 #if defined(CONFIG_5xx) || \ 515 defined(CONFIG_8xx) 516 uint get_immr (uint); 517 #endif 518 #if defined(CONFIG_MPC5xxx) 519 uint get_svr (void); 520 #endif 521 uint get_pvr (void); 522 uint get_svr (void); 523 uint rd_ic_cst (void); 524 void wr_ic_cst (uint); 525 void wr_ic_adr (uint); 526 uint rd_dc_cst (void); 527 void wr_dc_cst (uint); 528 void wr_dc_adr (uint); 529 int icache_status (void); 530 void icache_enable (void); 531 void icache_disable(void); 532 int dcache_status (void); 533 void dcache_enable (void); 534 void dcache_disable(void); 535 void mmu_disable(void); 536 #if defined(CONFIG_ARM) 537 void relocate_code(ulong); 538 #else 539 void relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn)); 540 #endif 541 ulong get_endaddr (void); 542 void trap_init (ulong); 543 #if defined (CONFIG_4xx) || \ 544 defined (CONFIG_MPC5xxx) || \ 545 defined (CONFIG_MPC85xx) || \ 546 defined (CONFIG_MPC86xx) || \ 547 defined (CONFIG_MPC83xx) 548 unsigned char in8(unsigned int); 549 void out8(unsigned int, unsigned char); 550 unsigned short in16(unsigned int); 551 unsigned short in16r(unsigned int); 552 void out16(unsigned int, unsigned short value); 553 void out16r(unsigned int, unsigned short value); 554 unsigned long in32(unsigned int); 555 unsigned long in32r(unsigned int); 556 void out32(unsigned int, unsigned long value); 557 void out32r(unsigned int, unsigned long value); 558 void ppcDcbf(unsigned long value); 559 void ppcDcbi(unsigned long value); 560 void ppcSync(void); 561 void ppcDcbz(unsigned long value); 562 #endif 563 #if defined (CONFIG_MICROBLAZE) 564 unsigned short in16(unsigned int); 565 void out16(unsigned int, unsigned short value); 566 #endif 567 568 #if defined (CONFIG_MPC83xx) 569 void ppcDWload(unsigned int *addr, unsigned int *ret); 570 void ppcDWstore(unsigned int *addr, unsigned int *value); 571 void disable_addr_trans(void); 572 void enable_addr_trans(void); 573 #if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER) 574 void ddr_enable_ecc(unsigned int dram_size); 575 #endif 576 #endif 577 578 /* $(CPU)/cpu.c */ 579 static inline int cpumask_next(int cpu, unsigned int mask) 580 { 581 for (cpu++; !((1 << cpu) & mask); cpu++) 582 ; 583 584 return cpu; 585 } 586 587 #define for_each_cpu(iter, cpu, num_cpus, mask) \ 588 for (iter = 0, cpu = cpumask_next(-1, mask); \ 589 iter < num_cpus; \ 590 iter++, cpu = cpumask_next(cpu, mask)) \ 591 592 int cpu_numcores (void); 593 int cpu_num_dspcores(void); 594 u32 cpu_mask (void); 595 u32 cpu_dsp_mask(void); 596 int is_core_valid (unsigned int); 597 598 /** 599 * arch_cpu_init() - basic cpu-dependent setup for an architecture 600 * 601 * This is called after early malloc is available. It should handle any 602 * CPU- or SoC- specific init needed to continue the init sequence. See 603 * board_f.c for where it is called. If this is not provided, a default 604 * version (which does nothing) will be used. 605 */ 606 int arch_cpu_init(void); 607 608 int checkcpu (void); 609 int checkicache (void); 610 int checkdcache (void); 611 void upmconfig (unsigned int, unsigned int *, unsigned int); 612 ulong get_tbclk (void); 613 void reset_misc (void); 614 void reset_cpu (ulong addr); 615 void ft_cpu_setup(void *blob, bd_t *bd); 616 void ft_pci_setup(void *blob, bd_t *bd); 617 618 void smp_set_core_boot_addr(unsigned long addr, int corenr); 619 void smp_kick_all_cpus(void); 620 621 /* $(CPU)/serial.c */ 622 int serial_init (void); 623 void serial_setbrg (void); 624 void serial_putc (const char); 625 void serial_putc_raw(const char); 626 void serial_puts (const char *); 627 int serial_getc (void); 628 int serial_tstc (void); 629 630 /* These versions take a stdio_dev pointer */ 631 struct stdio_dev; 632 int serial_stub_getc(struct stdio_dev *sdev); 633 int serial_stub_tstc(struct stdio_dev *sdev); 634 635 /* $(CPU)/speed.c */ 636 int get_clocks (void); 637 #if defined(CONFIG_MPC5xxx) 638 int prt_mpc5xxx_clks (void); 639 #endif 640 #if defined(CONFIG_LH7A40X) || \ 641 defined(CONFIG_EP93XX) 642 ulong get_FCLK (void); 643 ulong get_HCLK (void); 644 ulong get_PCLK (void); 645 ulong get_UCLK (void); 646 #endif 647 #if defined(CONFIG_LH7A40X) 648 ulong get_PLLCLK (void); 649 #endif 650 #if defined(CONFIG_IMX) 651 ulong get_systemPLLCLK(void); 652 ulong get_FCLK(void); 653 ulong get_HCLK(void); 654 ulong get_BCLK(void); 655 ulong get_PERCLK1(void); 656 ulong get_PERCLK2(void); 657 ulong get_PERCLK3(void); 658 #endif 659 ulong get_bus_freq (ulong); 660 int get_serial_clock(void); 661 662 #if defined(CONFIG_MPC85xx) 663 typedef MPC85xx_SYS_INFO sys_info_t; 664 void get_sys_info ( sys_info_t * ); 665 void ft_fixup_cpu(void *, u64); 666 void ft_fixup_num_cores(void *); 667 #endif 668 #if defined(CONFIG_MPC86xx) 669 typedef MPC86xx_SYS_INFO sys_info_t; 670 void get_sys_info ( sys_info_t * ); 671 static inline ulong get_ddr_freq(ulong dummy) 672 { 673 return get_bus_freq(dummy); 674 } 675 #else 676 ulong get_ddr_freq(ulong); 677 #endif 678 679 #if defined(CONFIG_4xx) 680 # if defined(CONFIG_440) 681 # if defined(CONFIG_440SPE) 682 unsigned long determine_sysper(void); 683 unsigned long determine_pci_clock_per(void); 684 # endif 685 # endif 686 typedef PPC4xx_SYS_INFO sys_info_t; 687 int ppc440spe_revB(void); 688 void get_sys_info ( sys_info_t * ); 689 #endif 690 691 /* $(CPU)/cpu_init.c */ 692 #if defined(CONFIG_8xx) || defined(CONFIG_MPC8260) 693 void cpu_init_f (volatile immap_t *immr); 694 #endif 695 #if defined(CONFIG_4xx) || defined(CONFIG_MCF52x2) || defined(CONFIG_MPC86xx) 696 void cpu_init_f (void); 697 #endif 698 #ifdef CONFIG_MPC85xx 699 ulong cpu_init_f(void); 700 #endif 701 702 int cpu_init_r (void); 703 704 /* $(CPU)/interrupts.c */ 705 int interrupt_init (void); 706 void timer_interrupt (struct pt_regs *); 707 void external_interrupt (struct pt_regs *); 708 void irq_install_handler(int, interrupt_handler_t *, void *); 709 void irq_free_handler (int); 710 void reset_timer (void); 711 712 /* Return value of monotonic microsecond timer */ 713 unsigned long timer_get_us(void); 714 715 void enable_interrupts (void); 716 int disable_interrupts (void); 717 718 /* $(CPU)/.../commproc.c */ 719 int dpram_init (void); 720 uint dpram_base(void); 721 uint dpram_base_align(uint align); 722 uint dpram_alloc(uint size); 723 uint dpram_alloc_align(uint size,uint align); 724 void bootcount_store (ulong); 725 ulong bootcount_load (void); 726 #define BOOTCOUNT_MAGIC 0xB001C041 727 728 /* $(CPU)/.../<eth> */ 729 void mii_init (void); 730 731 /* $(CPU)/.../lcd.c */ 732 ulong lcd_setmem (ulong); 733 734 /* $(CPU)/.../video.c */ 735 ulong video_setmem (ulong); 736 737 /* arch/$(ARCH)/lib/cache.c */ 738 void enable_caches(void); 739 void flush_cache (unsigned long, unsigned long); 740 void flush_dcache_all(void); 741 void flush_dcache_range(unsigned long start, unsigned long stop); 742 void invalidate_dcache_range(unsigned long start, unsigned long stop); 743 void invalidate_dcache_all(void); 744 void invalidate_icache_all(void); 745 746 enum { 747 /* Disable caches (else flush caches but leave them active) */ 748 CBL_DISABLE_CACHES = 1 << 0, 749 CBL_SHOW_BOOTSTAGE_REPORT = 1 << 1, 750 751 CBL_ALL = 3, 752 }; 753 754 /** 755 * Clean up ready for linux 756 * 757 * @param flags Flags to control what is done 758 */ 759 int cleanup_before_linux_select(int flags); 760 761 /* arch/$(ARCH)/lib/ticks.S */ 762 uint64_t get_ticks(void); 763 void wait_ticks (unsigned long); 764 765 /* arch/$(ARCH)/lib/time.c */ 766 ulong usec2ticks (unsigned long usec); 767 ulong ticks2usec (unsigned long ticks); 768 769 /* lib/gunzip.c */ 770 int gunzip(void *, int, unsigned char *, unsigned long *); 771 int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp, 772 int stoponerr, int offset); 773 774 /** 775 * gzwrite progress indicators: defined weak to allow board-specific 776 * overrides: 777 * 778 * gzwrite_progress_init called on startup 779 * gzwrite_progress called during decompress/write loop 780 * gzwrite_progress_finish called at end of loop to 781 * indicate success (retcode=0) or failure 782 */ 783 void gzwrite_progress_init(u64 expected_size); 784 785 void gzwrite_progress(int iteration, 786 u64 bytes_written, 787 u64 total_bytes); 788 789 void gzwrite_progress_finish(int retcode, 790 u64 totalwritten, 791 u64 totalsize, 792 u32 expected_crc, 793 u32 calculated_crc); 794 795 /** 796 * decompress and write gzipped image from memory to block device 797 * 798 * @param src compressed image address 799 * @param len compressed image length in bytes 800 * @param dev block device descriptor 801 * @param szwritebuf bytes per write (pad to erase size) 802 * @param startoffs offset in bytes of first write 803 * @param szexpected expected uncompressed length 804 * may be zero to use gzip trailer 805 * for files under 4GiB 806 */ 807 int gzwrite(unsigned char *src, int len, 808 struct blk_desc *dev, 809 unsigned long szwritebuf, 810 u64 startoffs, 811 u64 szexpected); 812 813 /* lib/lz4_wrapper.c */ 814 int ulz4fn(const void *src, size_t srcn, void *dst, size_t *dstn); 815 816 /* lib/qsort.c */ 817 void qsort(void *base, size_t nmemb, size_t size, 818 int(*compar)(const void *, const void *)); 819 int strcmp_compar(const void *, const void *); 820 821 /* lib/uuid.c */ 822 #include <uuid.h> 823 824 /* lib/vsprintf.c */ 825 #include <vsprintf.h> 826 827 /* lib/strmhz.c */ 828 char * strmhz(char *buf, unsigned long hz); 829 830 /* lib/crc32.c */ 831 #include <u-boot/crc.h> 832 833 /* lib/rand.c */ 834 #define RAND_MAX -1U 835 void srand(unsigned int seed); 836 unsigned int rand(void); 837 unsigned int rand_r(unsigned int *seedp); 838 839 /* 840 * STDIO based functions (can always be used) 841 */ 842 /* serial stuff */ 843 int serial_printf (const char *fmt, ...) 844 __attribute__ ((format (__printf__, 1, 2))); 845 /* stdin */ 846 int getc(void); 847 int tstc(void); 848 849 /* stdout */ 850 #if !defined(CONFIG_SPL_BUILD) || \ 851 (defined(CONFIG_TPL_BUILD) && defined(CONFIG_TPL_SERIAL_SUPPORT)) || \ 852 (defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD) && \ 853 defined(CONFIG_SPL_SERIAL_SUPPORT)) 854 void putc(const char c); 855 void puts(const char *s); 856 int printf(const char *fmt, ...) 857 __attribute__ ((format (__printf__, 1, 2))); 858 int vprintf(const char *fmt, va_list args); 859 #else 860 #define putc(...) do { } while (0) 861 #define puts(...) do { } while (0) 862 #define printf(...) do { } while (0) 863 #define vprintf(...) do { } while (0) 864 #endif 865 866 /* stderr */ 867 #define eputc(c) fputc(stderr, c) 868 #define eputs(s) fputs(stderr, s) 869 #define eprintf(fmt,args...) fprintf(stderr,fmt ,##args) 870 871 /* 872 * FILE based functions (can only be used AFTER relocation!) 873 */ 874 #define stdin 0 875 #define stdout 1 876 #define stderr 2 877 #define MAX_FILES 3 878 879 int fprintf(int file, const char *fmt, ...) 880 __attribute__ ((format (__printf__, 2, 3))); 881 void fputs(int file, const char *s); 882 void fputc(int file, const char c); 883 int ftstc(int file); 884 int fgetc(int file); 885 886 /* lib/gzip.c */ 887 int gzip(void *dst, unsigned long *lenp, 888 unsigned char *src, unsigned long srclen); 889 int zzip(void *dst, unsigned long *lenp, unsigned char *src, 890 unsigned long srclen, int stoponerr, 891 int (*func)(unsigned long, unsigned long)); 892 893 /* lib/net_utils.c */ 894 #include <net.h> 895 static inline struct in_addr getenv_ip(char *var) 896 { 897 return string_to_ip(getenv(var)); 898 } 899 900 int pcmcia_init (void); 901 902 #ifdef CONFIG_LED_STATUS 903 # include <status_led.h> 904 #endif 905 906 #include <bootstage.h> 907 908 #ifdef CONFIG_SHOW_ACTIVITY 909 void show_activity(int arg); 910 #endif 911 912 /* Multicore arch functions */ 913 #ifdef CONFIG_MP 914 int cpu_status(int nr); 915 int cpu_reset(int nr); 916 int cpu_disable(int nr); 917 int cpu_release(int nr, int argc, char * const argv[]); 918 #endif 919 920 #else /* __ASSEMBLY__ */ 921 922 /* Drop a C type modifier (like in 3UL) for constants used in assembly. */ 923 #define _AC(X, Y) X 924 925 #endif /* __ASSEMBLY__ */ 926 927 #ifdef CONFIG_PPC 928 /* 929 * Has to be included outside of the #ifndef __ASSEMBLY__ section. 930 * Otherwise might lead to compilation errors in assembler files. 931 */ 932 #include <asm/cache.h> 933 #endif 934 935 /* Put only stuff here that the assembler can digest */ 936 937 /* Declare an unsigned long constant digestable both by C and an assembler. */ 938 #define UL(x) _AC(x, UL) 939 940 #ifdef CONFIG_POST 941 #define CONFIG_HAS_POST 942 #ifndef CONFIG_POST_ALT_LIST 943 #define CONFIG_POST_STD_LIST 944 #endif 945 #endif 946 947 #ifdef CONFIG_INIT_CRITICAL 948 #error CONFIG_INIT_CRITICAL is deprecated! 949 #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README. 950 #endif 951 952 #define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1)) 953 954 /* 955 * check_member() - Check the offset of a structure member 956 * 957 * @structure: Name of structure (e.g. global_data) 958 * @member: Name of member (e.g. baudrate) 959 * @offset: Expected offset in bytes 960 */ 961 #define check_member(structure, member, offset) _Static_assert( \ 962 offsetof(struct structure, member) == offset, \ 963 "`struct " #structure "` offset for `" #member "` is not " #offset) 964 965 /* Avoid using CONFIG_EFI_STUB directly as we may boot from other loaders */ 966 #ifdef CONFIG_EFI_STUB 967 #define ll_boot_init() false 968 #else 969 #define ll_boot_init() true 970 #endif 971 972 /* Pull in stuff for the build system */ 973 #ifdef DO_DEPS_ONLY 974 # include <environment.h> 975 #endif 976 977 #endif /* __COMMON_H_ */ 978