1 /* 2 * (C) Copyright 2000-2009 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef __COMMON_H_ 9 #define __COMMON_H_ 1 10 11 #ifndef __ASSEMBLY__ /* put C only stuff in this section */ 12 13 typedef unsigned char uchar; 14 typedef volatile unsigned long vu_long; 15 typedef volatile unsigned short vu_short; 16 typedef volatile unsigned char vu_char; 17 18 /* Allow sharing constants with type modifiers between C and assembly. */ 19 #define _AC(X, Y) (X##Y) 20 21 #include <config.h> 22 #include <errno.h> 23 #include <time.h> 24 #include <asm-offsets.h> 25 #include <linux/bitops.h> 26 #include <linux/bug.h> 27 #include <linux/delay.h> 28 #include <linux/types.h> 29 #include <linux/printk.h> 30 #include <linux/string.h> 31 #include <linux/stringify.h> 32 #include <asm/ptrace.h> 33 #include <stdarg.h> 34 #include <stdio.h> 35 #include <linux/kernel.h> 36 37 #include <part.h> 38 #include <flash.h> 39 #include <image.h> 40 #include <stacktrace.h> 41 42 /* Bring in printf format macros if inttypes.h is included */ 43 #define __STDC_FORMAT_MACROS 44 45 #ifdef __LP64__ 46 #define CONFIG_SYS_SUPPORT_64BIT_DATA 47 #endif 48 49 #include <log.h> 50 51 #if (__STDC_VERSION__ >= 201112L) || defined(__cplusplus) 52 # undef static_assert 53 # define static_assert _Static_assert 54 #endif 55 56 #ifndef CONFIG_IRQ 57 typedef void (interrupt_handler_t)(void *); 58 #else 59 typedef void (interrupt_handler_t)(int, void *); 60 #endif 61 62 #include <asm/u-boot.h> /* boot information for Linux kernel */ 63 #include <asm/global_data.h> /* global data used for startup functions */ 64 65 #if defined(CONFIG_ENV_IS_EMBEDDED) 66 #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN 67 #elif ( ((CONFIG_ENV_ADDR+CONFIG_ENV_SIZE) < CONFIG_SYS_MONITOR_BASE) || \ 68 (CONFIG_ENV_ADDR >= (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)) ) || \ 69 defined(CONFIG_ENV_IS_IN_NVRAM) 70 #define TOTAL_MALLOC_LEN (CONFIG_SYS_MALLOC_LEN + CONFIG_ENV_SIZE) 71 #else 72 #define TOTAL_MALLOC_LEN CONFIG_SYS_MALLOC_LEN 73 #endif 74 75 /* 76 * Function Prototypes 77 */ 78 int dram_init(void); 79 80 /** 81 * dram_init_banksize() - Set up DRAM bank sizes 82 * 83 * This can be implemented by boards to set up the DRAM bank information in 84 * gd->bd->bi_dram(). It is called just before relocation, after dram_init() 85 * is called. 86 * 87 * If this is not provided, a default implementation will try to set up a 88 * single bank. It will do this if CONFIG_NR_DRAM_BANKS and 89 * CONFIG_SYS_SDRAM_BASE are set. The bank will have a start address of 90 * CONFIG_SYS_SDRAM_BASE and the size will be determined by a call to 91 * get_effective_memsize(). 92 * 93 * @return 0 if OK, -ve on error 94 */ 95 int dram_init_banksize(void); 96 97 void hang (void) __attribute__ ((noreturn)); 98 99 int timer_init(void); 100 int cpu_init(void); 101 102 #include <display_options.h> 103 104 /* common/main.c */ 105 void main_loop (void); 106 int run_command(const char *cmd, int flag); 107 int run_command_repeatable(const char *cmd, int flag); 108 109 /** 110 * Run a list of commands separated by ; or even \0 111 * 112 * Note that if 'len' is not -1, then the command does not need to be nul 113 * terminated, Memory will be allocated for the command in that case. 114 * 115 * @param cmd List of commands to run, each separated bu semicolon 116 * @param len Length of commands excluding terminator if known (-1 if not) 117 * @param flag Execution flags (CMD_FLAG_...) 118 * @return 0 on success, or != 0 on error. 119 */ 120 int run_command_list(const char *cmd, int len, int flag); 121 122 /* arch/$(ARCH)/lib/board.c */ 123 void board_init_f(ulong); 124 void board_init_r(gd_t *, ulong) __attribute__ ((noreturn)); 125 126 /** 127 * ulong board_init_f_alloc_reserve - allocate reserved area 128 * 129 * This function is called by each architecture very early in the start-up 130 * code to allow the C runtime to reserve space on the stack for writable 131 * 'globals' such as GD and the malloc arena. 132 * 133 * @top: top of the reserve area, growing down. 134 * @return: bottom of reserved area 135 */ 136 ulong board_init_f_alloc_reserve(ulong top); 137 138 /** 139 * board_init_f_init_reserve - initialize the reserved area(s) 140 * 141 * This function is called once the C runtime has allocated the reserved 142 * area on the stack. It must initialize the GD at the base of that area. 143 * 144 * @base: top from which reservation was done 145 */ 146 void board_init_f_init_reserve(ulong base); 147 148 /* 149 * Board-specific Platform code can init serial earlier if needed 150 */ 151 __weak int board_init_f_init_serial(void); 152 153 /** 154 * arch_setup_gd() - Set up the global_data pointer 155 * 156 * This pointer is special in some architectures and cannot easily be assigned 157 * to. For example on x86 it is implemented by adding a specific record to its 158 * Global Descriptor Table! So we we provide a function to carry out this task. 159 * For most architectures this can simply be: 160 * 161 * gd = gd_ptr; 162 * 163 * @gd_ptr: Pointer to global data 164 */ 165 void arch_setup_gd(gd_t *gd_ptr); 166 167 int checkboard(void); 168 int show_board_info(void); 169 int checkflash(void); 170 int checkdram(void); 171 int last_stage_init(void); 172 extern ulong monitor_flash_len; 173 int mac_read_from_eeprom(void); 174 extern u8 __dtb_dt_begin[]; /* embedded device tree blob */ 175 extern u8 __dtb_dt_spl_begin[]; /* embedded device tree blob for SPL/TPL */ 176 int set_cpu_clk_info(void); 177 int mdm_init(void); 178 int print_cpuinfo(void); 179 int update_flash_size(int flash_size); 180 int arch_early_init_r(void); 181 182 /* 183 * setup_board_extra() - Fill in extra details in the bd_t structure 184 * 185 * @return 0 if OK, -ve on error 186 */ 187 int setup_board_extra(void); 188 189 /** 190 * arch_fsp_init() - perform firmware support package init 191 * 192 * Where U-Boot relies on binary blobs to handle part of the system init, this 193 * function can be used to set up the blobs. This is used on some Intel 194 * platforms. 195 */ 196 int arch_fsp_init(void); 197 198 /** 199 * arch_cpu_init_dm() - init CPU after driver model is available 200 * 201 * This is called immediately after driver model is available before 202 * relocation. This is similar to arch_cpu_init() but is able to reference 203 * devices 204 * 205 * @return 0 if OK, -ve on error 206 */ 207 int arch_cpu_init_dm(void); 208 209 /** 210 * Reserve all necessary stacks 211 * 212 * This is used in generic board init sequence in common/board_f.c. Each 213 * architecture could provide this function to tailor the required stacks. 214 * 215 * On entry gd->start_addr_sp is pointing to the suggested top of the stack. 216 * The callee ensures gd->start_add_sp is 16-byte aligned, so architectures 217 * require only this can leave it untouched. 218 * 219 * On exit gd->start_addr_sp and gd->irq_sp should be set to the respective 220 * positions of the stack. The stack pointer(s) will be set to this later. 221 * gd->irq_sp is only required, if the architecture needs it. 222 * 223 * @return 0 if no error 224 */ 225 __weak int arch_reserve_stacks(void); 226 227 /** 228 * Show the DRAM size in a board-specific way 229 * 230 * This is used by boards to display DRAM information in their own way. 231 * 232 * @param size Size of DRAM (which should be displayed along with other info) 233 */ 234 void board_show_dram(phys_size_t size); 235 236 /** 237 * arch_fixup_fdt() - Write arch-specific information to fdt 238 * 239 * Defined in arch/$(ARCH)/lib/bootm-fdt.c 240 * 241 * @blob: FDT blob to write to 242 * @return 0 if ok, or -ve FDT_ERR_... on failure 243 */ 244 int arch_fixup_fdt(void *blob); 245 246 int reserve_mmu(void); 247 /* common/flash.c */ 248 void flash_perror (int); 249 250 /* common/cmd_source.c */ 251 int source (ulong addr, const char *fit_uname); 252 253 extern ulong load_addr; /* Default Load Address */ 254 extern ulong save_addr; /* Default Save Address */ 255 extern ulong save_size; /* Default Save Size */ 256 257 /* common/cmd_net.c */ 258 int do_tftpb(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]); 259 260 /* common/cmd_fat.c */ 261 int do_fat_fsload(cmd_tbl_t *, int, int, char * const []); 262 263 /* common/cmd_ext2.c */ 264 int do_ext2load(cmd_tbl_t *, int, int, char * const []); 265 266 /* common/cmd_nvedit.c */ 267 int env_init (void); 268 void env_relocate (void); 269 int envmatch (uchar *, int); 270 271 /** 272 * env_get() - Look up the value of an environment variable 273 * 274 * In U-Boot proper this can be called before relocation (which is when the 275 * environment is loaded from storage, i.e. GD_FLG_ENV_READY is 0). In that 276 * case this function calls env_get_f(). 277 * 278 * @varname: Variable to look up 279 * @return value of variable, or NULL if not found 280 */ 281 char *env_get(const char *varname); 282 283 /** 284 * env_get_f() - Look up the value of an environment variable (early) 285 * 286 * This function is called from env_get() if the environment has not been 287 * loaded yet (GD_FLG_ENV_READY flag is 0). Some environment locations will 288 * support reading the value (slowly) and some will not. 289 * 290 * @varname: Variable to look up 291 * @return value of variable, or NULL if not found 292 */ 293 int env_get_f(const char *name, char *buf, unsigned len); 294 295 /** 296 * env_get_ulong() - Return an environment variable as an integer value 297 * 298 * Most U-Boot environment variables store hex values. For those which store 299 * (e.g.) base-10 integers, this function can be used to read the value. 300 * 301 * @name: Variable to look up 302 * @base: Base to use (e.g. 10 for base 10, 2 for binary) 303 * @default_val: Default value to return if no value is found 304 * @return the value found, or @default_val if none 305 */ 306 ulong env_get_ulong(const char *name, int base, ulong default_val); 307 308 /** 309 * env_get_hex() - Return an environment variable as a hex value 310 * 311 * Decode an environment as a hex number (it may or may not have a 0x 312 * prefix). If the environment variable cannot be found, or does not start 313 * with hex digits, the default value is returned. 314 * 315 * @varname: Variable to decode 316 * @default_val: Value to return on error 317 */ 318 ulong env_get_hex(const char *varname, ulong default_val); 319 320 /* 321 * Read an environment variable as a boolean 322 * Return -1 if variable does not exist (default to true) 323 */ 324 int env_get_yesno(const char *var); 325 326 /** 327 * env_set() - set an environment variable 328 * 329 * This sets or deletes the value of an environment variable. For setting the 330 * value the variable is created if it does not already exist. 331 * 332 * @varname: Variable to adjust 333 * @value: Value to set for the variable, or NULL or "" to delete the variable 334 * @return 0 if OK, 1 on error 335 */ 336 int env_set(const char *varname, const char *value); 337 338 /** 339 * env_update() - update sub value of an environment variable 340 * 341 * This add/append/replace the sub value of an environment variable. 342 * 343 * @varname: Variable to adjust 344 * @valude: Value to append/replace 345 * @ignore: Value to be ignore if in varvalue 346 * @return 0 if OK, 1 on error 347 */ 348 int env_update_filter(const char *varname, const char *varvalue, 349 const char *ignore); 350 351 /** 352 * env_update() - update sub value of an environment variable 353 * 354 * This add/append/replace the sub value of an environment variable. 355 * 356 * @varname: Variable to adjust 357 * @valude: Value to append/replace 358 * @return 0 if OK, 1 on error 359 */ 360 int env_update(const char *varname, const char *varvalue); 361 362 /** 363 * env_exist() - check sub value of an environment variable is exist or not 364 * 365 * @varname: Variable to look up 366 * @value: Value to check 367 * @return posItion of varvalue if exist, otherwise NULL 368 */ 369 char *env_exist(const char *varname, const char *varvalue); 370 371 /** 372 * env_delete() - delete sub value of an environment variable 373 * 374 * @varname: Variable to look up 375 * @value: Item head of value to delete 376 * @complete_match: complete match whole words 377 * @return 0 if ok, 1 on error 378 */ 379 int env_delete(const char *varname, const char *varvalue, int complete_match); 380 381 /** 382 * env_set_ulong() - set an environment variable to an integer 383 * 384 * @varname: Variable to adjust 385 * @value: Value to set for the variable (will be converted to a string) 386 * @return 0 if OK, 1 on error 387 */ 388 int env_set_ulong(const char *varname, ulong value); 389 390 /** 391 * env_set_hex() - set an environment variable to a hex value 392 * 393 * @varname: Variable to adjust 394 * @value: Value to set for the variable (will be converted to a hex string) 395 * @return 0 if OK, 1 on error 396 */ 397 int env_set_hex(const char *varname, ulong value); 398 399 /** 400 * env_set_addr - Set an environment variable to an address in hex 401 * 402 * @varname: Environment variable to set 403 * @addr: Value to set it to 404 * @return 0 if ok, 1 on error 405 */ 406 static inline int env_set_addr(const char *varname, const void *addr) 407 { 408 return env_set_hex(varname, (ulong)addr); 409 } 410 411 #ifdef CONFIG_AUTO_COMPLETE 412 int env_complete(char *var, int maxv, char *cmdv[], int maxsz, char *buf); 413 #endif 414 int get_env_id (void); 415 416 void pci_init (void); 417 void pci_init_board(void); 418 419 #if defined(CONFIG_DTB_RESELECT) 420 int embedded_dtb_select(void); 421 #endif 422 423 int misc_init_f (void); 424 int misc_init_r (void); 425 426 /* common/exports.c */ 427 void jumptable_init(void); 428 429 /* common/kallsysm.c */ 430 const char *symbol_lookup(unsigned long addr, unsigned long *caddr); 431 432 /* common/memsize.c */ 433 long get_ram_size (long *, long); 434 phys_size_t get_effective_memsize(void); 435 436 /* $(BOARD)/$(BOARD).c */ 437 void reset_phy (void); 438 void fdc_hw_init (void); 439 440 /* $(BOARD)/eeprom.c */ 441 #ifdef CONFIG_CMD_EEPROM 442 void eeprom_init (int bus); 443 int eeprom_read (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); 444 int eeprom_write (unsigned dev_addr, unsigned offset, uchar *buffer, unsigned cnt); 445 #else 446 /* 447 * Some EEPROM code is depecated because it used the legacy I2C interface. Add 448 * some macros here so we don't have to touch every one of those uses 449 */ 450 #define eeprom_init(bus) 451 #define eeprom_read(dev_addr, offset, buffer, cnt) ((void)-ENOSYS) 452 #define eeprom_write(dev_addr, offset, buffer, cnt) ((void)-ENOSYS) 453 #endif 454 455 #if !defined(CONFIG_ENV_EEPROM_IS_ON_I2C) && defined(CONFIG_SYS_I2C_EEPROM_ADDR) 456 # define CONFIG_SYS_DEF_EEPROM_ADDR CONFIG_SYS_I2C_EEPROM_ADDR 457 #endif 458 459 #if defined(CONFIG_MPC8XX_SPI) 460 extern void spi_init_f (void); 461 extern void spi_init_r (void); 462 extern ssize_t spi_read (uchar *, int, uchar *, int); 463 extern ssize_t spi_write (uchar *, int, uchar *, int); 464 #endif 465 466 /* $(BOARD)/$(BOARD).c */ 467 int board_early_init_f (void); 468 int board_fix_fdt (void *rw_fdt_blob); /* manipulate the U-Boot fdt before its relocation */ 469 int board_late_init (void); 470 int board_postclk_init (void); /* after clocks/timebase, before env/serial */ 471 int board_early_init_r (void); 472 void board_poweroff (void); 473 void board_env_fixup(void); 474 475 #if defined(CONFIG_SYS_DRAM_TEST) 476 int testdram(void); 477 #endif /* CONFIG_SYS_DRAM_TEST */ 478 479 /* $(CPU)/start.S */ 480 int icache_status (void); 481 void icache_enable (void); 482 void icache_disable(void); 483 int dcache_status (void); 484 void dcache_enable (void); 485 void dcache_disable(void); 486 void mmu_disable(void); 487 #if defined(CONFIG_ARM) 488 void relocate_code(ulong); 489 #else 490 void relocate_code(ulong, gd_t *, ulong) __attribute__ ((noreturn)); 491 #endif 492 ulong get_endaddr (void); 493 void trap_init (ulong); 494 495 /* $(CPU)/cpu.c */ 496 static inline int cpumask_next(int cpu, unsigned int mask) 497 { 498 for (cpu++; !((1 << cpu) & mask); cpu++) 499 ; 500 501 return cpu; 502 } 503 504 #define for_each_cpu(iter, cpu, num_cpus, mask) \ 505 for (iter = 0, cpu = cpumask_next(-1, mask); \ 506 iter < num_cpus; \ 507 iter++, cpu = cpumask_next(cpu, mask)) \ 508 509 int cpu_numcores (void); 510 int cpu_num_dspcores(void); 511 u32 cpu_mask (void); 512 u32 cpu_dsp_mask(void); 513 int is_core_valid (unsigned int); 514 515 /** 516 * arch_cpu_init() - basic cpu-dependent setup for an architecture 517 * 518 * This is called after early malloc is available. It should handle any 519 * CPU- or SoC- specific init needed to continue the init sequence. See 520 * board_f.c for where it is called. If this is not provided, a default 521 * version (which does nothing) will be used. 522 */ 523 int arch_cpu_init(void); 524 525 void s_init(void); 526 527 int checkcpu (void); 528 int checkicache (void); 529 int checkdcache (void); 530 void upmconfig (unsigned int, unsigned int *, unsigned int); 531 ulong get_tbclk (void); 532 void reset_misc (void); 533 void reset_cpu (ulong addr); 534 void ft_cpu_setup(void *blob, bd_t *bd); 535 void ft_pci_setup(void *blob, bd_t *bd); 536 537 void smp_set_core_boot_addr(unsigned long addr, int corenr); 538 void smp_kick_all_cpus(void); 539 540 /* $(CPU)/serial.c */ 541 int serial_init (void); 542 void serial_setbrg (void); 543 void serial_putc (const char); 544 void serial_clear (void); 545 void serial_putc_raw(const char); 546 void serial_puts (const char *); 547 int serial_getc (void); 548 int serial_tstc (void); 549 550 /* $(CPU)/speed.c */ 551 int get_clocks (void); 552 ulong get_bus_freq (ulong); 553 int get_serial_clock(void); 554 555 int cpu_init_r (void); 556 557 /* $(CPU)/interrupts.c */ 558 int interrupt_init (void); 559 void timer_interrupt (struct pt_regs *); 560 void external_interrupt (struct pt_regs *); 561 void irq_install_handler(int, interrupt_handler_t *, void *); 562 void irq_free_handler (int); 563 void reset_timer (void); 564 565 /* Return value of monotonic microsecond timer */ 566 unsigned long timer_get_us(void); 567 568 void enable_interrupts (void); 569 int disable_interrupts (void); 570 571 /* $(CPU)/.../commproc.c */ 572 int dpram_init (void); 573 uint dpram_base(void); 574 uint dpram_base_align(uint align); 575 uint dpram_alloc(uint size); 576 uint dpram_alloc_align(uint size,uint align); 577 void bootcount_store (ulong); 578 ulong bootcount_load (void); 579 #define BOOTCOUNT_MAGIC 0xB001C041 580 581 /* $(CPU)/.../<eth> */ 582 void mii_init (void); 583 584 /* $(CPU)/.../lcd.c */ 585 ulong lcd_setmem (ulong); 586 587 /* $(CPU)/.../video.c */ 588 ulong video_setmem (ulong); 589 590 /* arch/$(ARCH)/lib/cache.c */ 591 void enable_caches(void); 592 void flush_cache (unsigned long, unsigned long); 593 void flush_dcache_all(void); 594 void flush_dcache_range(unsigned long start, unsigned long stop); 595 void invalidate_dcache_range(unsigned long start, unsigned long stop); 596 void invalidate_dcache_all(void); 597 void invalidate_icache_all(void); 598 599 enum { 600 /* Disable caches (else flush caches but leave them active) */ 601 CBL_DISABLE_CACHES = 1 << 0, 602 CBL_SHOW_BOOTSTAGE_REPORT = 1 << 1, 603 604 CBL_ALL = 3, 605 }; 606 607 /** 608 * Clean up ready for linux 609 * 610 * @param flags Flags to control what is done 611 */ 612 int cleanup_before_linux_select(int flags); 613 614 /* arch/$(ARCH)/lib/ticks.S */ 615 uint64_t get_ticks(void); 616 void wait_ticks (unsigned long); 617 618 /* arch/$(ARCH)/lib/time.c */ 619 ulong usec2ticks (unsigned long usec); 620 ulong ticks2usec (unsigned long ticks); 621 622 /* lib/gunzip.c */ 623 int gzip_parse_header(const unsigned char *src, unsigned long len); 624 int gunzip(void *, int, unsigned char *, unsigned long *); 625 int zunzip(void *dst, int dstlen, unsigned char *src, unsigned long *lenp, 626 int stoponerr, int offset); 627 628 /** 629 * gzwrite progress indicators: defined weak to allow board-specific 630 * overrides: 631 * 632 * gzwrite_progress_init called on startup 633 * gzwrite_progress called during decompress/write loop 634 * gzwrite_progress_finish called at end of loop to 635 * indicate success (retcode=0) or failure 636 */ 637 void gzwrite_progress_init(u64 expected_size); 638 639 void gzwrite_progress(int iteration, 640 u64 bytes_written, 641 u64 total_bytes); 642 643 void gzwrite_progress_finish(int retcode, 644 u64 totalwritten, 645 u64 totalsize, 646 u32 expected_crc, 647 u32 calculated_crc); 648 649 /** 650 * decompress and write gzipped image from memory to block device 651 * 652 * @param src compressed image address 653 * @param len compressed image length in bytes 654 * @param dev block device descriptor 655 * @param szwritebuf bytes per write (pad to erase size) 656 * @param startoffs offset in bytes of first write 657 * @param szexpected expected uncompressed length 658 * may be zero to use gzip trailer 659 * for files under 4GiB 660 */ 661 int gzwrite(unsigned char *src, int len, 662 struct blk_desc *dev, 663 unsigned long szwritebuf, 664 u64 startoffs, 665 u64 szexpected); 666 667 /* lib/lz4_wrapper.c */ 668 bool lz4_is_valid_header(const unsigned char *h); 669 int ulz4fn(const void *src, size_t srcn, void *dst, size_t *dstn); 670 671 /* lib/qsort.c */ 672 void qsort(void *base, size_t nmemb, size_t size, 673 int(*compar)(const void *, const void *)); 674 int strcmp_compar(const void *, const void *); 675 676 /* lib/uuid.c */ 677 #include <uuid.h> 678 679 /* lib/vsprintf.c */ 680 #include <vsprintf.h> 681 682 /* lib/strmhz.c */ 683 char * strmhz(char *buf, unsigned long hz); 684 685 /* lib/crc32.c */ 686 #include <u-boot/crc.h> 687 688 /* lib/rand.c */ 689 #define RAND_MAX -1U 690 void srand(unsigned int seed); 691 unsigned int rand(void); 692 unsigned int rand_r(unsigned int *seedp); 693 694 /* 695 * STDIO based functions (can always be used) 696 */ 697 /* serial stuff */ 698 int serial_printf (const char *fmt, ...) 699 __attribute__ ((format (__printf__, 1, 2))); 700 701 /* lib/gzip.c */ 702 int gzip(void *dst, unsigned long *lenp, 703 unsigned char *src, unsigned long srclen); 704 int zzip(void *dst, unsigned long *lenp, unsigned char *src, 705 unsigned long srclen, int stoponerr, 706 int (*func)(unsigned long, unsigned long)); 707 708 /* lib/net_utils.c */ 709 #include <net.h> 710 static inline struct in_addr env_get_ip(char *var) 711 { 712 return string_to_ip(env_get(var)); 713 } 714 715 int pcmcia_init (void); 716 717 #ifdef CONFIG_LED_STATUS 718 # include <status_led.h> 719 #endif 720 721 #include <bootstage.h> 722 723 #ifdef CONFIG_SHOW_ACTIVITY 724 void show_activity(int arg); 725 #endif 726 727 /* Multicore arch functions */ 728 #ifdef CONFIG_MP 729 int cpu_status(int nr); 730 int cpu_reset(int nr); 731 int cpu_disable(int nr); 732 int cpu_release(int nr, int argc, char * const argv[]); 733 #endif 734 735 #else /* __ASSEMBLY__ */ 736 737 /* Drop a C type modifier (like in 3UL) for constants used in assembly. */ 738 #define _AC(X, Y) X 739 740 #endif /* __ASSEMBLY__ */ 741 742 /* Put only stuff here that the assembler can digest */ 743 744 /* Declare an unsigned long constant digestable both by C and an assembler. */ 745 #define UL(x) _AC(x, UL) 746 747 #ifdef CONFIG_POST 748 #define CONFIG_HAS_POST 749 #ifndef CONFIG_POST_ALT_LIST 750 #define CONFIG_POST_STD_LIST 751 #endif 752 #endif 753 754 #ifdef CONFIG_INIT_CRITICAL 755 #error CONFIG_INIT_CRITICAL is deprecated! 756 #error Read section CONFIG_SKIP_LOWLEVEL_INIT in README. 757 #endif 758 759 #define ROUND(a,b) (((a) + (b) - 1) & ~((b) - 1)) 760 761 /* 762 * check_member() - Check the offset of a structure member 763 * 764 * @structure: Name of structure (e.g. global_data) 765 * @member: Name of member (e.g. baudrate) 766 * @offset: Expected offset in bytes 767 */ 768 #define check_member(structure, member, offset) _Static_assert( \ 769 offsetof(struct structure, member) == offset, \ 770 "`struct " #structure "` offset for `" #member "` is not " #offset) 771 772 /* Avoid using CONFIG_EFI_STUB directly as we may boot from other loaders */ 773 #ifdef CONFIG_EFI_STUB 774 #define ll_boot_init() false 775 #else 776 #define ll_boot_init() true 777 #endif 778 779 /* Pull in stuff for the build system */ 780 #ifdef DO_DEPS_ONLY 781 # include <environment.h> 782 #endif 783 784 #endif /* __COMMON_H_ */ 785