1 /* 2 * This file implements recording of each stage of the boot process. It is 3 * intended to implement timing of each stage, reporting this information 4 * to the user and passing it to the OS for logging / further analysis. 5 * Note that it requires timer_get_boot_us() to be defined by the board 6 * 7 * Copyright (c) 2011 The Chromium OS Authors. 8 * 9 * SPDX-License-Identifier: GPL-2.0+ 10 */ 11 12 #ifndef _BOOTSTAGE_H 13 #define _BOOTSTAGE_H 14 15 /* Define this for host tools */ 16 #ifndef CONFIG_BOOTSTAGE_USER_COUNT 17 #define CONFIG_BOOTSTAGE_USER_COUNT 20 18 #endif 19 20 /* Flags for each bootstage record */ 21 enum bootstage_flags { 22 BOOTSTAGEF_ERROR = 1 << 0, /* Error record */ 23 BOOTSTAGEF_ALLOC = 1 << 1, /* Allocate an id */ 24 }; 25 26 /* bootstate sub-IDs used for kernel and ramdisk ranges */ 27 enum { 28 BOOTSTAGE_SUB_FORMAT, 29 BOOTSTAGE_SUB_FORMAT_OK, 30 BOOTSTAGE_SUB_NO_UNIT_NAME, 31 BOOTSTAGE_SUB_UNIT_NAME, 32 BOOTSTAGE_SUB_SUBNODE, 33 34 BOOTSTAGE_SUB_CHECK, 35 BOOTSTAGE_SUB_HASH = 5, 36 BOOTSTAGE_SUB_CHECK_ARCH = 5, 37 BOOTSTAGE_SUB_CHECK_ALL, 38 BOOTSTAGE_SUB_GET_DATA, 39 BOOTSTAGE_SUB_CHECK_ALL_OK = 7, 40 BOOTSTAGE_SUB_GET_DATA_OK, 41 BOOTSTAGE_SUB_LOAD, 42 }; 43 44 /* 45 * A list of boot stages that we know about. Each of these indicates the 46 * state that we are at, and the action that we are about to perform. For 47 * errors, we issue an error for an item when it fails. Therefore the 48 * normal sequence is: 49 * 50 * progress action1 51 * progress action2 52 * progress action3 53 * 54 * and an error condition where action 3 failed would be: 55 * 56 * progress action1 57 * progress action2 58 * progress action3 59 * error on action3 60 */ 61 enum bootstage_id { 62 BOOTSTAGE_ID_START = 0, 63 BOOTSTAGE_ID_CHECK_MAGIC, /* Checking image magic */ 64 BOOTSTAGE_ID_CHECK_HEADER, /* Checking image header */ 65 BOOTSTAGE_ID_CHECK_CHECKSUM, /* Checking image checksum */ 66 BOOTSTAGE_ID_CHECK_ARCH, /* Checking architecture */ 67 68 BOOTSTAGE_ID_CHECK_IMAGETYPE = 5,/* Checking image type */ 69 BOOTSTAGE_ID_DECOMP_IMAGE, /* Decompressing image */ 70 BOOTSTAGE_ID_KERNEL_LOADED, /* Kernel has been loaded */ 71 BOOTSTAGE_ID_DECOMP_UNIMPL = 7, /* Odd decompression algorithm */ 72 BOOTSTAGE_ID_CHECK_BOOT_OS, /* Calling OS-specific boot function */ 73 BOOTSTAGE_ID_BOOT_OS_RETURNED, /* Tried to boot OS, but it returned */ 74 BOOTSTAGE_ID_CHECK_RAMDISK = 9, /* Checking ram disk */ 75 76 BOOTSTAGE_ID_RD_MAGIC, /* Checking ram disk magic */ 77 BOOTSTAGE_ID_RD_HDR_CHECKSUM, /* Checking ram disk heder checksum */ 78 BOOTSTAGE_ID_RD_CHECKSUM, /* Checking ram disk checksum */ 79 BOOTSTAGE_ID_COPY_RAMDISK = 12, /* Copying ram disk into place */ 80 BOOTSTAGE_ID_RAMDISK, /* Checking for valid ramdisk */ 81 BOOTSTAGE_ID_NO_RAMDISK, /* No ram disk found (not an error) */ 82 83 BOOTSTAGE_ID_RUN_OS = 15, /* Exiting U-Boot, entering OS */ 84 85 BOOTSTAGE_ID_NEED_RESET = 30, 86 BOOTSTAGE_ID_POST_FAIL, /* Post failure */ 87 BOOTSTAGE_ID_POST_FAIL_R, /* Post failure reported after reloc */ 88 89 /* 90 * This set is reported only by x86, and the meaning is different. In 91 * this case we are reporting completion of a particular stage. 92 * This should probably change in the x86 code (which doesn't report 93 * errors in any case), but discussion this can perhaps wait until we 94 * have a generic board implementation. 95 */ 96 BOOTSTAGE_ID_BOARD_INIT_R, /* We have relocated */ 97 BOOTSTAGE_ID_BOARD_GLOBAL_DATA, /* Global data is set up */ 98 99 BOOTSTAGE_ID_BOARD_INIT_SEQ, /* We completed the init sequence */ 100 BOOTSTAGE_ID_BOARD_FLASH, /* We have configured flash banks */ 101 BOOTSTAGE_ID_BOARD_FLASH_37, /* In case you didn't hear... */ 102 BOOTSTAGE_ID_BOARD_ENV, /* Environment is relocated & ready */ 103 BOOTSTAGE_ID_BOARD_PCI, /* PCI is up */ 104 105 BOOTSTAGE_ID_BOARD_INTERRUPTS, /* Exceptions / interrupts ready */ 106 BOOTSTAGE_ID_BOARD_DONE, /* Board init done, off to main loop */ 107 /* ^^^ here ends the x86 sequence */ 108 109 /* Boot stages related to loading a kernel from an IDE device */ 110 BOOTSTAGE_ID_IDE_START = 41, 111 BOOTSTAGE_ID_IDE_ADDR, 112 BOOTSTAGE_ID_IDE_BOOT_DEVICE, 113 BOOTSTAGE_ID_IDE_TYPE, 114 115 BOOTSTAGE_ID_IDE_PART, 116 BOOTSTAGE_ID_IDE_PART_INFO, 117 BOOTSTAGE_ID_IDE_PART_TYPE, 118 BOOTSTAGE_ID_IDE_PART_READ, 119 BOOTSTAGE_ID_IDE_FORMAT, 120 121 BOOTSTAGE_ID_IDE_CHECKSUM, /* 50 */ 122 BOOTSTAGE_ID_IDE_READ, 123 124 /* Boot stages related to loading a kernel from an NAND device */ 125 BOOTSTAGE_ID_NAND_PART, 126 BOOTSTAGE_ID_NAND_SUFFIX, 127 BOOTSTAGE_ID_NAND_BOOT_DEVICE, 128 BOOTSTAGE_ID_NAND_HDR_READ = 55, 129 BOOTSTAGE_ID_NAND_AVAILABLE = 55, 130 BOOTSTAGE_ID_NAND_TYPE = 57, 131 BOOTSTAGE_ID_NAND_READ, 132 133 /* Boot stages related to loading a kernel from an network device */ 134 BOOTSTAGE_ID_NET_CHECKSUM = 60, 135 BOOTSTAGE_ID_NET_ETH_START = 64, 136 BOOTSTAGE_ID_NET_ETH_INIT, 137 138 BOOTSTAGE_ID_NET_START = 80, 139 BOOTSTAGE_ID_NET_NETLOOP_OK, 140 BOOTSTAGE_ID_NET_LOADED, 141 BOOTSTAGE_ID_NET_DONE_ERR, 142 BOOTSTAGE_ID_NET_DONE, 143 144 BOOTSTAGE_ID_FIT_FDT_START = 90, 145 /* 146 * Boot stages related to loading a FIT image. Some of these are a 147 * bit wonky. 148 */ 149 BOOTSTAGE_ID_FIT_KERNEL_START = 100, 150 151 BOOTSTAGE_ID_FIT_CONFIG = 110, 152 BOOTSTAGE_ID_FIT_TYPE, 153 BOOTSTAGE_ID_FIT_KERNEL_INFO, 154 155 BOOTSTAGE_ID_FIT_COMPRESSION, 156 BOOTSTAGE_ID_FIT_OS, 157 BOOTSTAGE_ID_FIT_LOADADDR, 158 BOOTSTAGE_ID_OVERWRITTEN, 159 160 /* Next 10 IDs used by BOOTSTAGE_SUB_... */ 161 BOOTSTAGE_ID_FIT_RD_START = 120, /* Ramdisk stages */ 162 163 /* Next 10 IDs used by BOOTSTAGE_SUB_... */ 164 BOOTSTAGE_ID_FIT_SETUP_START = 130, /* x86 setup stages */ 165 166 BOOTSTAGE_ID_IDE_FIT_READ = 140, 167 BOOTSTAGE_ID_IDE_FIT_READ_OK, 168 169 BOOTSTAGE_ID_NAND_FIT_READ = 150, 170 BOOTSTAGE_ID_NAND_FIT_READ_OK, 171 172 BOOTSTAGE_ID_FIT_LOADABLE_START = 160, /* for Loadable Images */ 173 /* 174 * These boot stages are new, higher level, and not directly related 175 * to the old boot progress numbers. They are useful for recording 176 * rough boot timing information. 177 */ 178 BOOTSTAGE_ID_AWAKE, 179 BOOTSTAGE_ID_START_SPL, 180 BOOTSTAGE_ID_END_SPL, 181 BOOTSTAGE_ID_START_UBOOT_F, 182 BOOTSTAGE_ID_START_UBOOT_R, 183 BOOTSTAGE_ID_USB_START, 184 BOOTSTAGE_ID_ETH_START, 185 BOOTSTAGE_ID_BOOTP_START, 186 BOOTSTAGE_ID_BOOTP_STOP, 187 BOOTSTAGE_ID_BOOTM_START, 188 BOOTSTAGE_ID_BOOTM_HANDOFF, 189 BOOTSTAGE_ID_MAIN_LOOP, 190 BOOTSTAGE_KERNELREAD_START, 191 BOOTSTAGE_KERNELREAD_STOP, 192 BOOTSTAGE_ID_BOARD_INIT, 193 BOOTSTAGE_ID_BOARD_INIT_DONE, 194 195 BOOTSTAGE_ID_CPU_AWAKE, 196 BOOTSTAGE_ID_MAIN_CPU_AWAKE, 197 BOOTSTAGE_ID_MAIN_CPU_READY, 198 199 BOOTSTAGE_ID_ACCUM_LCD, 200 BOOTSTAGE_ID_ACCUM_SCSI, 201 BOOTSTAGE_ID_ACCUM_SPI, 202 BOOTSTAGE_ID_ACCUM_DECOMP, 203 BOOTSTAGE_ID_FPGA_INIT, 204 BOOTSTATE_ID_ACCUM_DM_SPL, 205 BOOTSTATE_ID_ACCUM_DM_F, 206 BOOTSTATE_ID_ACCUM_DM_R, 207 208 /* a few spare for the user, from here */ 209 BOOTSTAGE_ID_USER, 210 BOOTSTAGE_ID_COUNT = BOOTSTAGE_ID_USER + CONFIG_BOOTSTAGE_USER_COUNT, 211 BOOTSTAGE_ID_ALLOC, 212 }; 213 214 /* 215 * Return the time since boot in microseconds, This is needed for bootstage 216 * and should be defined in CPU- or board-specific code. If undefined then 217 * you will get a link error. 218 */ 219 ulong timer_get_boot_us(void); 220 221 #if defined(USE_HOSTCC) 222 #define show_boot_progress(val) do {} while (0) 223 #else 224 /** 225 * Board code can implement show_boot_progress() if needed. 226 * 227 * @param val Progress state (enum bootstage_id), or -id if an error 228 * has occurred. 229 */ 230 void show_boot_progress(int val); 231 #endif 232 233 #if !defined(USE_HOSTCC) 234 #if CONFIG_IS_ENABLED(BOOTSTAGE) 235 #define ENABLE_BOOTSTAGE 236 #endif 237 #endif 238 239 #ifdef ENABLE_BOOTSTAGE 240 241 /* This is the full bootstage implementation */ 242 243 /** 244 * Relocate existing bootstage records 245 * 246 * Call this after relocation has happened and after malloc has been initted. 247 * We need to copy any pointers in bootstage records that were added pre- 248 * relocation, since memory can be overwritten later. 249 * @return Always returns 0, to indicate success 250 */ 251 int bootstage_relocate(void); 252 253 /** 254 * Add a new bootstage record 255 * 256 * @param id Bootstage ID to use (ignored if flags & BOOTSTAGEF_ALLOC) 257 * @param name Name of record, or NULL for none 258 * @param flags Flags (BOOTSTAGEF_...) 259 * @param mark Time to record in this record, in microseconds 260 */ 261 ulong bootstage_add_record(enum bootstage_id id, const char *name, 262 int flags, ulong mark); 263 264 /** 265 * Mark a time stamp for the current boot stage. 266 */ 267 ulong bootstage_mark(enum bootstage_id id); 268 269 ulong bootstage_error(enum bootstage_id id); 270 271 ulong bootstage_mark_name(enum bootstage_id id, const char *name); 272 273 /** 274 * Mark a time stamp in the given function and line number 275 * 276 * See BOOTSTAGE_MARKER() for a convenient macro. 277 * 278 * @param file Filename to record (NULL if none) 279 * @param func Function name to record 280 * @param linenum Line number to record 281 * @return recorded time stamp 282 */ 283 ulong bootstage_mark_code(const char *file, const char *func, 284 int linenum); 285 286 /** 287 * Mark the start of a bootstage activity. The end will be marked later with 288 * bootstage_accum() and at that point we accumulate the time taken. Calling 289 * this function turns the given id into a accumulator rather than and 290 * absolute mark in time. Accumulators record the total amount of time spent 291 * in an activty during boot. 292 * 293 * @param id Bootstage id to record this timestamp against 294 * @param name Textual name to display for this id in the report (maybe NULL) 295 * @return start timestamp in microseconds 296 */ 297 uint32_t bootstage_start(enum bootstage_id id, const char *name); 298 299 /** 300 * Mark the end of a bootstage activity 301 * 302 * After previously marking the start of an activity with bootstage_start(), 303 * call this function to mark the end. You can call these functions in pairs 304 * as many times as you like. 305 * 306 * @param id Bootstage id to record this timestamp against 307 * @return time spent in this iteration of the activity (i.e. the time now 308 * less the start time recorded in the last bootstage_start() call 309 * with this id. 310 */ 311 uint32_t bootstage_accum(enum bootstage_id id); 312 313 /* Print a report about boot time */ 314 void bootstage_report(void); 315 316 /** 317 * Add bootstage information to the device tree 318 * 319 * @return 0 if ok, -ve on error 320 */ 321 int bootstage_fdt_add_report(void); 322 323 /** 324 * Stash bootstage data into memory 325 * 326 * @param base Base address of memory buffer 327 * @param size Size of memory buffer 328 * @return 0 if stashed ok, -1 if out of space 329 */ 330 int bootstage_stash(void *base, int size); 331 332 /** 333 * Read bootstage data from memory 334 * 335 * Bootstage data is read from memory and placed in the bootstage table 336 * in the user records. 337 * 338 * @param base Base address of memory buffer 339 * @param size Size of memory buffer (-1 if unknown) 340 * @return 0 if unstashed ok, -ENOENT if bootstage info not found, -ENOSPC if 341 * there is not space for read the stacked data, or other error if 342 * something else went wrong 343 */ 344 int bootstage_unstash(const void *base, int size); 345 346 /** 347 * bootstage_get_size() - Get the size of the bootstage data 348 * 349 * @return size of boostage data in bytes 350 */ 351 int bootstage_get_size(void); 352 353 /** 354 * bootstage_init() - Prepare bootstage for use 355 * 356 * @first: true if this is the first time bootstage is set up. This causes it 357 * to add a 'reset' record with a time of 0. 358 */ 359 int bootstage_init(bool first); 360 361 #else 362 static inline ulong bootstage_add_record(enum bootstage_id id, 363 const char *name, int flags, ulong mark) 364 { 365 return 0; 366 } 367 368 /* 369 * This is a dummy implementation which just calls show_boot_progress(), 370 * and won't even do that unless CONFIG_SHOW_BOOT_PROGRESS is defined 371 */ 372 373 static inline int bootstage_relocate(void) 374 { 375 return 0; 376 } 377 378 static inline ulong bootstage_mark(enum bootstage_id id) 379 { 380 show_boot_progress(id); 381 return 0; 382 } 383 384 static inline ulong bootstage_error(enum bootstage_id id) 385 { 386 show_boot_progress(-id); 387 return 0; 388 } 389 390 static inline ulong bootstage_mark_name(enum bootstage_id id, const char *name) 391 { 392 show_boot_progress(id); 393 return 0; 394 } 395 396 static inline ulong bootstage_mark_code(const char *file, const char *func, 397 int linenum) 398 { 399 return 0; 400 } 401 402 static inline uint32_t bootstage_start(enum bootstage_id id, const char *name) 403 { 404 return 0; 405 } 406 407 static inline uint32_t bootstage_accum(enum bootstage_id id) 408 { 409 return 0; 410 } 411 412 static inline int bootstage_stash(void *base, int size) 413 { 414 return 0; /* Pretend to succeed */ 415 } 416 417 static inline int bootstage_unstash(const void *base, int size) 418 { 419 return 0; /* Pretend to succeed */ 420 } 421 422 static inline int bootstage_get_size(void) 423 { 424 return 0; 425 } 426 427 static inline int bootstage_init(bool first) 428 { 429 return 0; 430 } 431 432 #endif /* ENABLE_BOOTSTAGE */ 433 434 /* Helper macro for adding a bootstage to a line of code */ 435 #define BOOTSTAGE_MARKER() \ 436 bootstage_mark_code(__FILE__, __func__, __LINE__) 437 438 #endif 439