1 /* 2 * storage_common.c -- Common definitions for mass storage functionality 3 * 4 * Copyright (C) 2003-2008 Alan Stern 5 * Copyeight (C) 2009 Samsung Electronics 6 * Author: Michal Nazarewicz (m.nazarewicz@samsung.com) 7 * 8 * Ported to u-boot: 9 * Andrzej Pietrasiewicz <andrzej.p@samsung.com> 10 * 11 * Code refactoring & cleanup: 12 * Łukasz Majewski <l.majewski@samsung.com> 13 * 14 * SPDX-License-Identifier: GPL-2.0+ 15 */ 16 17 18 /* 19 * This file requires the following identifiers used in USB strings to 20 * be defined (each of type pointer to char): 21 * - fsg_string_manufacturer -- name of the manufacturer 22 * - fsg_string_product -- name of the product 23 * - fsg_string_serial -- product's serial 24 * - fsg_string_config -- name of the configuration 25 * - fsg_string_interface -- name of the interface 26 * The first four are only needed when FSG_DESCRIPTORS_DEVICE_STRINGS 27 * macro is defined prior to including this file. 28 */ 29 30 /* 31 * When FSG_NO_INTR_EP is defined fsg_fs_intr_in_desc and 32 * fsg_hs_intr_in_desc objects as well as 33 * FSG_FS_FUNCTION_PRE_EP_ENTRIES and FSG_HS_FUNCTION_PRE_EP_ENTRIES 34 * macros are not defined. 35 * 36 * When FSG_NO_DEVICE_STRINGS is defined FSG_STRING_MANUFACTURER, 37 * FSG_STRING_PRODUCT, FSG_STRING_SERIAL and FSG_STRING_CONFIG are not 38 * defined (as well as corresponding entries in string tables are 39 * missing) and FSG_STRING_INTERFACE has value of zero. 40 * 41 * When FSG_NO_OTG is defined fsg_otg_desc won't be defined. 42 */ 43 44 /* 45 * When FSG_BUFFHD_STATIC_BUFFER is defined when this file is included 46 * the fsg_buffhd structure's buf field will be an array of FSG_BUFLEN 47 * characters rather then a pointer to void. 48 */ 49 50 51 /* #include <asm/unaligned.h> */ 52 53 54 /* 55 * Thanks to NetChip Technologies for donating this product ID. 56 * 57 * DO NOT REUSE THESE IDs with any other driver!! Ever!! 58 * Instead: allocate your own, using normal USB-IF procedures. 59 */ 60 #define FSG_VENDOR_ID 0x0525 /* NetChip */ 61 #define FSG_PRODUCT_ID 0xa4a5 /* Linux-USB File-backed Storage Gadget */ 62 63 /*-------------------------------------------------------------------------*/ 64 65 #ifndef DEBUG 66 #undef VERBOSE_DEBUG 67 #undef DUMP_MSGS 68 #endif /* !DEBUG */ 69 70 #ifdef VERBOSE_DEBUG 71 #define VLDBG LDBG 72 #else 73 #define VLDBG(lun, fmt, args...) do { } while (0) 74 #endif /* VERBOSE_DEBUG */ 75 76 /* 77 #define LDBG(lun, fmt, args...) dev_dbg (&(lun)->dev, fmt, ## args) 78 #define LERROR(lun, fmt, args...) dev_err (&(lun)->dev, fmt, ## args) 79 #define LWARN(lun, fmt, args...) dev_warn(&(lun)->dev, fmt, ## args) 80 #define LINFO(lun, fmt, args...) dev_info(&(lun)->dev, fmt, ## args) 81 */ 82 83 #define LDBG(lun, fmt, args...) do { } while (0) 84 #define LERROR(lun, fmt, args...) do { } while (0) 85 #define LWARN(lun, fmt, args...) do { } while (0) 86 #define LINFO(lun, fmt, args...) do { } while (0) 87 88 /* 89 * Keep those macros in sync with those in 90 * include/linux/usb/composite.h or else GCC will complain. If they 91 * are identical (the same names of arguments, white spaces in the 92 * same places) GCC will allow redefinition otherwise (even if some 93 * white space is removed or added) warning will be issued. 94 * 95 * Those macros are needed here because File Storage Gadget does not 96 * include the composite.h header. For composite gadgets those macros 97 * are redundant since composite.h is included any way. 98 * 99 * One could check whether those macros are already defined (which 100 * would indicate composite.h had been included) or not (which would 101 * indicate we were in FSG) but this is not done because a warning is 102 * desired if definitions here differ from the ones in composite.h. 103 * 104 * We want the definitions to match and be the same in File Storage 105 * Gadget as well as Mass Storage Function (and so composite gadgets 106 * using MSF). If someone changes them in composite.h it will produce 107 * a warning in this file when building MSF. 108 */ 109 110 #define DBG(d, fmt, args...) debug(fmt , ## args) 111 #define VDBG(d, fmt, args...) debug(fmt , ## args) 112 /* #define ERROR(d, fmt, args...) printf(fmt , ## args) */ 113 /* #define WARNING(d, fmt, args...) printf(fmt , ## args) */ 114 /* #define INFO(d, fmt, args...) printf(fmt , ## args) */ 115 116 /* #define DBG(d, fmt, args...) do { } while (0) */ 117 /* #define VDBG(d, fmt, args...) do { } while (0) */ 118 #define ERROR(d, fmt, args...) do { } while (0) 119 #define WARNING(d, fmt, args...) do { } while (0) 120 #define INFO(d, fmt, args...) do { } while (0) 121 122 #ifdef DUMP_MSGS 123 124 /* dump_msg(fsg, const char * label, const u8 * buf, unsigned length); */ 125 # define dump_msg(fsg, label, buf, length) do { \ 126 if (length < 512) { \ 127 DBG(fsg, "%s, length %u:\n", label, length); \ 128 print_hex_dump("", DUMP_PREFIX_OFFSET, \ 129 16, 1, buf, length, 0); \ 130 } \ 131 } while (0) 132 133 # define dump_cdb(fsg) do { } while (0) 134 135 #else 136 137 # define dump_msg(fsg, /* const char * */ label, \ 138 /* const u8 * */ buf, /* unsigned */ length) do { } while (0) 139 140 # ifdef VERBOSE_DEBUG 141 142 # define dump_cdb(fsg) \ 143 print_hex_dump("SCSI CDB: ", DUMP_PREFIX_NONE, \ 144 16, 1, (fsg)->cmnd, (fsg)->cmnd_size, 0) \ 145 146 # else 147 148 # define dump_cdb(fsg) do { } while (0) 149 150 # endif /* VERBOSE_DEBUG */ 151 152 #endif /* DUMP_MSGS */ 153 154 /*-------------------------------------------------------------------------*/ 155 156 /* SCSI device types */ 157 #define TYPE_DISK 0x00 158 #define TYPE_CDROM 0x05 159 160 /* USB protocol value = the transport method */ 161 #define USB_PR_CBI 0x00 /* Control/Bulk/Interrupt */ 162 #define USB_PR_CB 0x01 /* Control/Bulk w/o interrupt */ 163 #define USB_PR_BULK 0x50 /* Bulk-only */ 164 165 /* USB subclass value = the protocol encapsulation */ 166 #define USB_SC_RBC 0x01 /* Reduced Block Commands (flash) */ 167 #define USB_SC_8020 0x02 /* SFF-8020i, MMC-2, ATAPI (CD-ROM) */ 168 #define USB_SC_QIC 0x03 /* QIC-157 (tape) */ 169 #define USB_SC_UFI 0x04 /* UFI (floppy) */ 170 #define USB_SC_8070 0x05 /* SFF-8070i (removable) */ 171 #define USB_SC_SCSI 0x06 /* Transparent SCSI */ 172 173 /* Bulk-only data structures */ 174 175 /* Command Block Wrapper */ 176 struct fsg_bulk_cb_wrap { 177 __le32 Signature; /* Contains 'USBC' */ 178 u32 Tag; /* Unique per command id */ 179 __le32 DataTransferLength; /* Size of the data */ 180 u8 Flags; /* Direction in bit 7 */ 181 u8 Lun; /* LUN (normally 0) */ 182 u8 Length; /* Of the CDB, <= MAX_COMMAND_SIZE */ 183 u8 CDB[16]; /* Command Data Block */ 184 }; 185 186 #define USB_BULK_CB_WRAP_LEN 31 187 #define USB_BULK_CB_SIG 0x43425355 /* Spells out USBC */ 188 #define USB_BULK_IN_FLAG 0x80 189 190 /* Command Status Wrapper */ 191 struct bulk_cs_wrap { 192 __le32 Signature; /* Should = 'USBS' */ 193 u32 Tag; /* Same as original command */ 194 __le32 Residue; /* Amount not transferred */ 195 u8 Status; /* See below */ 196 }; 197 198 #define USB_BULK_CS_WRAP_LEN 13 199 #define USB_BULK_CS_SIG 0x53425355 /* Spells out 'USBS' */ 200 #define USB_STATUS_PASS 0 201 #define USB_STATUS_FAIL 1 202 #define USB_STATUS_PHASE_ERROR 2 203 204 /* Bulk-only class specific requests */ 205 #define USB_BULK_RESET_REQUEST 0xff 206 #define USB_BULK_GET_MAX_LUN_REQUEST 0xfe 207 208 /* CBI Interrupt data structure */ 209 struct interrupt_data { 210 u8 bType; 211 u8 bValue; 212 }; 213 214 #define CBI_INTERRUPT_DATA_LEN 2 215 216 /* CBI Accept Device-Specific Command request */ 217 #define USB_CBI_ADSC_REQUEST 0x00 218 219 /* Length of a SCSI Command Data Block */ 220 #define MAX_COMMAND_SIZE 16 221 222 /* SCSI commands that we recognize */ 223 #define SC_FORMAT_UNIT 0x04 224 #define SC_INQUIRY 0x12 225 #define SC_MODE_SELECT_6 0x15 226 #define SC_MODE_SELECT_10 0x55 227 #define SC_MODE_SENSE_6 0x1a 228 #define SC_MODE_SENSE_10 0x5a 229 #define SC_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e 230 #define SC_READ_6 0x08 231 #define SC_READ_10 0x28 232 #define SC_READ_12 0xa8 233 #define SC_READ_CAPACITY 0x25 234 #define SC_READ_FORMAT_CAPACITIES 0x23 235 #define SC_READ_HEADER 0x44 236 #define SC_READ_TOC 0x43 237 #define SC_RELEASE 0x17 238 #define SC_REQUEST_SENSE 0x03 239 #define SC_RESERVE 0x16 240 #define SC_SEND_DIAGNOSTIC 0x1d 241 #define SC_START_STOP_UNIT 0x1b 242 #define SC_SYNCHRONIZE_CACHE 0x35 243 #define SC_TEST_UNIT_READY 0x00 244 #define SC_VERIFY 0x2f 245 #define SC_WRITE_6 0x0a 246 #define SC_WRITE_10 0x2a 247 #define SC_WRITE_12 0xaa 248 249 /* SCSI Sense Key/Additional Sense Code/ASC Qualifier values */ 250 #define SS_NO_SENSE 0 251 #define SS_COMMUNICATION_FAILURE 0x040800 252 #define SS_INVALID_COMMAND 0x052000 253 #define SS_INVALID_FIELD_IN_CDB 0x052400 254 #define SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE 0x052100 255 #define SS_LOGICAL_UNIT_NOT_SUPPORTED 0x052500 256 #define SS_MEDIUM_NOT_PRESENT 0x023a00 257 #define SS_MEDIUM_REMOVAL_PREVENTED 0x055302 258 #define SS_NOT_READY_TO_READY_TRANSITION 0x062800 259 #define SS_RESET_OCCURRED 0x062900 260 #define SS_SAVING_PARAMETERS_NOT_SUPPORTED 0x053900 261 #define SS_UNRECOVERED_READ_ERROR 0x031100 262 #define SS_WRITE_ERROR 0x030c02 263 #define SS_WRITE_PROTECTED 0x072700 264 265 #define SK(x) ((u8) ((x) >> 16)) /* Sense Key byte, etc. */ 266 #define ASC(x) ((u8) ((x) >> 8)) 267 #define ASCQ(x) ((u8) (x)) 268 269 struct device_attribute { int i; }; 270 #define ETOOSMALL 525 271 272 #include <usb_mass_storage.h> 273 274 /*-------------------------------------------------------------------------*/ 275 276 struct fsg_lun { 277 loff_t file_length; 278 loff_t num_sectors; 279 280 unsigned int initially_ro:1; 281 unsigned int ro:1; 282 unsigned int removable:1; 283 unsigned int cdrom:1; 284 unsigned int prevent_medium_removal:1; 285 unsigned int registered:1; 286 unsigned int info_valid:1; 287 unsigned int nofua:1; 288 289 u32 sense_data; 290 u32 sense_data_info; 291 u32 unit_attention_data; 292 293 struct device dev; 294 }; 295 296 #define fsg_lun_is_open(curlun) ((curlun)->filp != NULL) 297 #if 0 298 static struct fsg_lun *fsg_lun_from_dev(struct device *dev) 299 { 300 return container_of(dev, struct fsg_lun, dev); 301 } 302 #endif 303 304 /* Big enough to hold our biggest descriptor */ 305 #define EP0_BUFSIZE 256 306 #define DELAYED_STATUS (EP0_BUFSIZE + 999) /* An impossibly large value */ 307 308 /* Number of buffers we will use. 2 is enough for double-buffering */ 309 #define FSG_NUM_BUFFERS 2 310 311 #if defined(CONFIG_USB_DWC3_GADGET) && defined(ROCKUSB_FSG_BUFLEN) 312 #define FSG_BUFLEN ((u32)ROCKUSB_FSG_BUFLEN) 313 #else 314 /* Default size of buffer length. */ 315 #define FSG_BUFLEN ((u32)262144) 316 #endif 317 318 /* Maximal number of LUNs supported in mass storage function */ 319 #define FSG_MAX_LUNS 8 320 321 enum fsg_buffer_state { 322 BUF_STATE_EMPTY = 0, 323 BUF_STATE_FULL, 324 BUF_STATE_BUSY 325 }; 326 327 struct fsg_buffhd { 328 #ifdef FSG_BUFFHD_STATIC_BUFFER 329 char buf[FSG_BUFLEN]; 330 #else 331 void *buf; 332 #endif 333 enum fsg_buffer_state state; 334 struct fsg_buffhd *next; 335 336 /* 337 * The NetChip 2280 is faster, and handles some protocol faults 338 * better, if we don't submit any short bulk-out read requests. 339 * So we will record the intended request length here. 340 */ 341 unsigned int bulk_out_intended_length; 342 343 struct usb_request *inreq; 344 int inreq_busy; 345 struct usb_request *outreq; 346 int outreq_busy; 347 }; 348 349 enum fsg_state { 350 /* This one isn't used anywhere */ 351 FSG_STATE_COMMAND_PHASE = -10, 352 FSG_STATE_DATA_PHASE, 353 FSG_STATE_STATUS_PHASE, 354 355 FSG_STATE_IDLE = 0, 356 FSG_STATE_ABORT_BULK_OUT, 357 FSG_STATE_RESET, 358 FSG_STATE_INTERFACE_CHANGE, 359 FSG_STATE_CONFIG_CHANGE, 360 FSG_STATE_DISCONNECT, 361 FSG_STATE_EXIT, 362 FSG_STATE_TERMINATED 363 }; 364 365 enum data_direction { 366 DATA_DIR_UNKNOWN = 0, 367 DATA_DIR_FROM_HOST, 368 DATA_DIR_TO_HOST, 369 DATA_DIR_NONE 370 }; 371 372 /*-------------------------------------------------------------------------*/ 373 374 static inline u32 get_unaligned_be24(u8 *buf) 375 { 376 return 0xffffff & (u32) get_unaligned_be32(buf - 1); 377 } 378 379 /*-------------------------------------------------------------------------*/ 380 381 enum { 382 #ifndef FSG_NO_DEVICE_STRINGS 383 FSG_STRING_MANUFACTURER = 1, 384 FSG_STRING_PRODUCT, 385 FSG_STRING_SERIAL, 386 FSG_STRING_CONFIG, 387 #endif 388 FSG_STRING_INTERFACE 389 }; 390 391 #ifndef FSG_NO_OTG 392 static struct usb_otg_descriptor 393 fsg_otg_desc = { 394 .bLength = sizeof fsg_otg_desc, 395 .bDescriptorType = USB_DT_OTG, 396 397 .bmAttributes = USB_OTG_SRP, 398 }; 399 #endif 400 401 /* There is only one interface. */ 402 403 static struct usb_interface_descriptor 404 fsg_intf_desc = { 405 .bLength = sizeof fsg_intf_desc, 406 .bDescriptorType = USB_DT_INTERFACE, 407 408 .bNumEndpoints = 2, /* Adjusted during fsg_bind() */ 409 .bInterfaceClass = USB_CLASS_MASS_STORAGE, 410 .bInterfaceSubClass = USB_SC_SCSI, /* Adjusted during fsg_bind() */ 411 .bInterfaceProtocol = USB_PR_BULK, /* Adjusted during fsg_bind() */ 412 .iInterface = FSG_STRING_INTERFACE, 413 }; 414 415 /* 416 * Three full-speed endpoint descriptors: bulk-in, bulk-out, and 417 * interrupt-in. 418 */ 419 420 static struct usb_endpoint_descriptor 421 fsg_fs_bulk_in_desc = { 422 .bLength = USB_DT_ENDPOINT_SIZE, 423 .bDescriptorType = USB_DT_ENDPOINT, 424 425 .bEndpointAddress = USB_DIR_IN, 426 .bmAttributes = USB_ENDPOINT_XFER_BULK, 427 /* wMaxPacketSize set by autoconfiguration */ 428 }; 429 430 static struct usb_endpoint_descriptor 431 fsg_fs_bulk_out_desc = { 432 .bLength = USB_DT_ENDPOINT_SIZE, 433 .bDescriptorType = USB_DT_ENDPOINT, 434 435 .bEndpointAddress = USB_DIR_OUT, 436 .bmAttributes = USB_ENDPOINT_XFER_BULK, 437 /* wMaxPacketSize set by autoconfiguration */ 438 }; 439 440 #ifndef FSG_NO_INTR_EP 441 442 static struct usb_endpoint_descriptor 443 fsg_fs_intr_in_desc = { 444 .bLength = USB_DT_ENDPOINT_SIZE, 445 .bDescriptorType = USB_DT_ENDPOINT, 446 447 .bEndpointAddress = USB_DIR_IN, 448 .bmAttributes = USB_ENDPOINT_XFER_INT, 449 .wMaxPacketSize = cpu_to_le16(2), 450 .bInterval = 32, /* frames -> 32 ms */ 451 }; 452 453 #ifndef FSG_NO_OTG 454 # define FSG_FS_FUNCTION_PRE_EP_ENTRIES 2 455 #else 456 # define FSG_FS_FUNCTION_PRE_EP_ENTRIES 1 457 #endif 458 459 #endif 460 461 static struct usb_descriptor_header *fsg_fs_function[] = { 462 #ifndef FSG_NO_OTG 463 (struct usb_descriptor_header *) &fsg_otg_desc, 464 #endif 465 (struct usb_descriptor_header *) &fsg_intf_desc, 466 (struct usb_descriptor_header *) &fsg_fs_bulk_in_desc, 467 (struct usb_descriptor_header *) &fsg_fs_bulk_out_desc, 468 #ifndef FSG_NO_INTR_EP 469 (struct usb_descriptor_header *) &fsg_fs_intr_in_desc, 470 #endif 471 NULL, 472 }; 473 474 /* 475 * USB 2.0 devices need to expose both high speed and full speed 476 * descriptors, unless they only run at full speed. 477 * 478 * That means alternate endpoint descriptors (bigger packets) 479 * and a "device qualifier" ... plus more construction options 480 * for the configuration descriptor. 481 */ 482 static struct usb_endpoint_descriptor 483 fsg_hs_bulk_in_desc = { 484 .bLength = USB_DT_ENDPOINT_SIZE, 485 .bDescriptorType = USB_DT_ENDPOINT, 486 487 /* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */ 488 .bmAttributes = USB_ENDPOINT_XFER_BULK, 489 .wMaxPacketSize = cpu_to_le16(512), 490 }; 491 492 static struct usb_endpoint_descriptor 493 fsg_hs_bulk_out_desc = { 494 .bLength = USB_DT_ENDPOINT_SIZE, 495 .bDescriptorType = USB_DT_ENDPOINT, 496 497 /* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */ 498 .bmAttributes = USB_ENDPOINT_XFER_BULK, 499 .wMaxPacketSize = cpu_to_le16(512), 500 .bInterval = 1, /* NAK every 1 uframe */ 501 }; 502 503 #ifndef FSG_NO_INTR_EP 504 505 static struct usb_endpoint_descriptor 506 fsg_hs_intr_in_desc = { 507 .bLength = USB_DT_ENDPOINT_SIZE, 508 .bDescriptorType = USB_DT_ENDPOINT, 509 510 /* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */ 511 .bmAttributes = USB_ENDPOINT_XFER_INT, 512 .wMaxPacketSize = cpu_to_le16(2), 513 .bInterval = 9, /* 2**(9-1) = 256 uframes -> 32 ms */ 514 }; 515 516 #ifndef FSG_NO_OTG 517 # define FSG_HS_FUNCTION_PRE_EP_ENTRIES 2 518 #else 519 # define FSG_HS_FUNCTION_PRE_EP_ENTRIES 1 520 #endif 521 522 #endif 523 524 static struct usb_descriptor_header *fsg_hs_function[] = { 525 #ifndef FSG_NO_OTG 526 (struct usb_descriptor_header *) &fsg_otg_desc, 527 #endif 528 (struct usb_descriptor_header *) &fsg_intf_desc, 529 (struct usb_descriptor_header *) &fsg_hs_bulk_in_desc, 530 (struct usb_descriptor_header *) &fsg_hs_bulk_out_desc, 531 #ifndef FSG_NO_INTR_EP 532 (struct usb_descriptor_header *) &fsg_hs_intr_in_desc, 533 #endif 534 NULL, 535 }; 536 537 static struct usb_endpoint_descriptor 538 fsg_ss_bulk_in_desc = { 539 .bLength = USB_DT_ENDPOINT_SIZE, 540 .bDescriptorType = USB_DT_ENDPOINT, 541 542 /* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */ 543 .bmAttributes = USB_ENDPOINT_XFER_BULK, 544 .wMaxPacketSize = cpu_to_le16(1024), 545 }; 546 547 static struct usb_ss_ep_comp_descriptor 548 fsg_ss_bulk_in_comp_desc = { 549 .bLength = sizeof(fsg_ss_bulk_in_comp_desc), 550 .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, 551 /* .bMaxBurst = DYNAMIC, */ 552 }; 553 554 static struct usb_endpoint_descriptor 555 fsg_ss_bulk_out_desc = { 556 .bLength = USB_DT_ENDPOINT_SIZE, 557 .bDescriptorType = USB_DT_ENDPOINT, 558 559 /* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */ 560 .bmAttributes = USB_ENDPOINT_XFER_BULK, 561 .wMaxPacketSize = cpu_to_le16(1024), 562 }; 563 564 static struct usb_ss_ep_comp_descriptor 565 fsg_ss_bulk_out_comp_desc = { 566 .bLength = sizeof(fsg_ss_bulk_out_comp_desc), 567 .bDescriptorType = USB_DT_SS_ENDPOINT_COMP, 568 /* .bMaxBurst = DYNAMIC, */ 569 }; 570 571 /* Maxpacket and other transfer characteristics vary by speed. */ 572 static struct usb_endpoint_descriptor * 573 fsg_ep_desc(struct usb_gadget *g, struct usb_endpoint_descriptor *fs, 574 struct usb_endpoint_descriptor *hs, 575 struct usb_endpoint_descriptor *ss, 576 struct usb_ss_ep_comp_descriptor *comp_desc, 577 struct usb_ep *ep) 578 { 579 struct usb_endpoint_descriptor *speed_desc = NULL; 580 581 /* select desired speed */ 582 switch (g->speed) { 583 case USB_SPEED_SUPER: 584 if (gadget_is_superspeed(g)) { 585 speed_desc = ss; 586 ep->comp_desc = comp_desc; 587 break; 588 } 589 /* else: Fall trough */ 590 case USB_SPEED_HIGH: 591 if (gadget_is_dualspeed(g)) { 592 speed_desc = hs; 593 break; 594 } 595 /* else: fall through */ 596 default: 597 speed_desc = fs; 598 } 599 600 /* 601 * Config the ep maxpacket according to the right descriptors 602 * for a given endpoint. 603 */ 604 ep->maxpacket = usb_endpoint_maxp(speed_desc) & USB_ENDPOINT_MAXP_MASK; 605 606 return speed_desc; 607 } 608 609 /* Static strings, in UTF-8 (for simplicity we use only ASCII characters) */ 610 static struct usb_string fsg_strings[] = { 611 #ifndef FSG_NO_DEVICE_STRINGS 612 {FSG_STRING_MANUFACTURER, fsg_string_manufacturer}, 613 {FSG_STRING_PRODUCT, fsg_string_product}, 614 {FSG_STRING_SERIAL, fsg_string_serial}, 615 {FSG_STRING_CONFIG, fsg_string_config}, 616 #endif 617 {FSG_STRING_INTERFACE, fsg_string_interface}, 618 {} 619 }; 620 621 static struct usb_gadget_strings fsg_stringtab = { 622 .language = 0x0409, /* en-us */ 623 .strings = fsg_strings, 624 }; 625 626 /*-------------------------------------------------------------------------*/ 627 628 /* 629 * If the next two routines are called while the gadget is registered, 630 * the caller must own fsg->filesem for writing. 631 */ 632 633 static int fsg_lun_open(struct fsg_lun *curlun, unsigned int num_sectors, 634 const char *filename) 635 { 636 int ro; 637 638 /* R/W if we can, R/O if we must */ 639 ro = curlun->initially_ro; 640 641 curlun->ro = ro; 642 curlun->file_length = num_sectors << 9; 643 curlun->num_sectors = num_sectors; 644 debug("open backing file: %s\n", filename); 645 646 return 0; 647 } 648 649 static void fsg_lun_close(struct fsg_lun *curlun) 650 { 651 } 652 653 /*-------------------------------------------------------------------------*/ 654 655 /* 656 * Sync the file data, don't bother with the metadata. 657 * This code was copied from fs/buffer.c:sys_fdatasync(). 658 */ 659 static int fsg_lun_fsync_sub(struct fsg_lun *curlun) 660 { 661 return 0; 662 } 663 664 static void store_cdrom_address(u8 *dest, int msf, u32 addr) 665 { 666 if (msf) { 667 /* Convert to Minutes-Seconds-Frames */ 668 addr >>= 2; /* Convert to 2048-byte frames */ 669 addr += 2*75; /* Lead-in occupies 2 seconds */ 670 dest[3] = addr % 75; /* Frames */ 671 addr /= 75; 672 dest[2] = addr % 60; /* Seconds */ 673 addr /= 60; 674 dest[1] = addr; /* Minutes */ 675 dest[0] = 0; /* Reserved */ 676 } else { 677 /* Absolute sector */ 678 put_unaligned_be32(addr, dest); 679 } 680 } 681 682 /*-------------------------------------------------------------------------*/ 683