1 /* 2 * COM1 NS16550 support 3 * originally from linux source (arch/powerpc/boot/ns16550.c) 4 * modified to use CONFIG_SYS_ISA_MEM and new defines 5 */ 6 7 #include <common.h> 8 #include <clk.h> 9 #include <dm.h> 10 #include <errno.h> 11 #include <ns16550.h> 12 #include <serial.h> 13 #include <watchdog.h> 14 #include <linux/types.h> 15 #include <asm/io.h> 16 17 DECLARE_GLOBAL_DATA_PTR; 18 19 #define UART_LCRVAL UART_LCR_8N1 /* 8 data, 1 stop, no parity */ 20 #define UART_MCRVAL (UART_MCR_DTR | \ 21 UART_MCR_RTS) /* RTS/DTR */ 22 23 #ifndef CONFIG_DM_SERIAL 24 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED 25 #define serial_out(x, y) outb(x, (ulong)y) 26 #define serial_in(y) inb((ulong)y) 27 #elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE > 0) 28 #define serial_out(x, y) out_be32(y, x) 29 #define serial_in(y) in_be32(y) 30 #elif defined(CONFIG_SYS_NS16550_MEM32) && (CONFIG_SYS_NS16550_REG_SIZE < 0) 31 #define serial_out(x, y) out_le32(y, x) 32 #define serial_in(y) in_le32(y) 33 #else 34 #define serial_out(x, y) writeb(x, y) 35 #define serial_in(y) readb(y) 36 #endif 37 #endif /* !CONFIG_DM_SERIAL */ 38 39 #if defined(CONFIG_SOC_KEYSTONE) 40 #define UART_REG_VAL_PWREMU_MGMT_UART_DISABLE 0 41 #define UART_REG_VAL_PWREMU_MGMT_UART_ENABLE ((1 << 14) | (1 << 13) | (1 << 0)) 42 #undef UART_MCRVAL 43 #ifdef CONFIG_SERIAL_HW_FLOW_CONTROL 44 #define UART_MCRVAL (UART_MCR_RTS | UART_MCR_AFE) 45 #else 46 #define UART_MCRVAL (UART_MCR_RTS) 47 #endif 48 #endif 49 50 #ifndef CONFIG_SYS_NS16550_IER 51 #define CONFIG_SYS_NS16550_IER 0x00 52 #endif /* CONFIG_SYS_NS16550_IER */ 53 54 static inline void serial_out_shift(void *addr, int shift, int value) 55 { 56 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED 57 outb(value, (ulong)addr); 58 #elif defined(CONFIG_SYS_NS16550_MEM32) && !defined(CONFIG_SYS_BIG_ENDIAN) 59 out_le32(addr, value); 60 #elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN) 61 out_be32(addr, value); 62 #elif defined(CONFIG_SYS_NS16550_MEM32) 63 writel(value, addr); 64 #elif defined(CONFIG_SYS_BIG_ENDIAN) 65 writeb(value, addr + (1 << shift) - 1); 66 #else 67 writeb(value, addr); 68 #endif 69 } 70 71 static inline int serial_in_shift(void *addr, int shift) 72 { 73 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED 74 return inb((ulong)addr); 75 #elif defined(CONFIG_SYS_NS16550_MEM32) && !defined(CONFIG_SYS_BIG_ENDIAN) 76 return in_le32(addr); 77 #elif defined(CONFIG_SYS_NS16550_MEM32) && defined(CONFIG_SYS_BIG_ENDIAN) 78 return in_be32(addr); 79 #elif defined(CONFIG_SYS_NS16550_MEM32) 80 return readl(addr); 81 #elif defined(CONFIG_SYS_BIG_ENDIAN) 82 return readb(addr + (1 << shift) - 1); 83 #else 84 return readb(addr); 85 #endif 86 } 87 88 #ifdef CONFIG_DM_SERIAL 89 90 #ifndef CONFIG_SYS_NS16550_CLK 91 #define CONFIG_SYS_NS16550_CLK 0 92 #endif 93 94 static void ns16550_writeb(NS16550_t port, int offset, int value) 95 { 96 struct ns16550_platdata *plat = port->plat; 97 unsigned char *addr; 98 99 offset *= 1 << plat->reg_shift; 100 addr = (unsigned char *)plat->base + offset; 101 102 /* 103 * As far as we know it doesn't make sense to support selection of 104 * these options at run-time, so use the existing CONFIG options. 105 */ 106 serial_out_shift(addr + plat->reg_offset, plat->reg_shift, value); 107 } 108 109 static int ns16550_readb(NS16550_t port, int offset) 110 { 111 struct ns16550_platdata *plat = port->plat; 112 unsigned char *addr; 113 114 offset *= 1 << plat->reg_shift; 115 addr = (unsigned char *)plat->base + offset; 116 117 return serial_in_shift(addr + plat->reg_offset, plat->reg_shift); 118 } 119 120 static u32 ns16550_getfcr(NS16550_t port) 121 { 122 struct ns16550_platdata *plat = port->plat; 123 124 return plat->fcr; 125 } 126 127 /* We can clean these up once everything is moved to driver model */ 128 #define serial_out(value, addr) \ 129 ns16550_writeb(com_port, \ 130 (unsigned char *)addr - (unsigned char *)com_port, value) 131 #define serial_in(addr) \ 132 ns16550_readb(com_port, \ 133 (unsigned char *)addr - (unsigned char *)com_port) 134 #else 135 static u32 ns16550_getfcr(NS16550_t port) 136 { 137 return UART_FCR_DEFVAL; 138 } 139 #endif 140 141 int ns16550_calc_divisor(NS16550_t port, int clock, int baudrate) 142 { 143 const unsigned int mode_x_div = 16; 144 145 return DIV_ROUND_CLOSEST(clock, mode_x_div * baudrate); 146 } 147 148 static void NS16550_setbrg(NS16550_t com_port, int baud_divisor) 149 { 150 serial_out(UART_LCR_BKSE | UART_LCRVAL, &com_port->lcr); 151 serial_out(baud_divisor & 0xff, &com_port->dll); 152 serial_out((baud_divisor >> 8) & 0xff, &com_port->dlm); 153 serial_out(UART_LCRVAL, &com_port->lcr); 154 } 155 156 void NS16550_init(NS16550_t com_port, int baud_divisor) 157 { 158 #if (defined(CONFIG_SPL_BUILD) && \ 159 (defined(CONFIG_OMAP34XX) || defined(CONFIG_OMAP44XX))) 160 /* 161 * On some OMAP3/OMAP4 devices when UART3 is configured for boot mode 162 * before SPL starts only THRE bit is set. We have to empty the 163 * transmitter before initialization starts. 164 */ 165 if ((serial_in(&com_port->lsr) & (UART_LSR_TEMT | UART_LSR_THRE)) 166 == UART_LSR_THRE) { 167 if (baud_divisor != -1) 168 NS16550_setbrg(com_port, baud_divisor); 169 serial_out(0, &com_port->mdr1); 170 } 171 #endif 172 173 while (!(serial_in(&com_port->lsr) & UART_LSR_TEMT)) 174 ; 175 176 serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier); 177 #if defined(CONFIG_ARCH_OMAP2PLUS) 178 serial_out(0x7, &com_port->mdr1); /* mode select reset TL16C750*/ 179 #endif 180 serial_out(UART_MCRVAL, &com_port->mcr); 181 serial_out(ns16550_getfcr(com_port), &com_port->fcr); 182 if (baud_divisor != -1) 183 NS16550_setbrg(com_port, baud_divisor); 184 #if defined(CONFIG_ARCH_OMAP2PLUS) || defined(CONFIG_SOC_DA8XX) 185 /* /16 is proper to hit 115200 with 48MHz */ 186 serial_out(0, &com_port->mdr1); 187 #endif 188 #if defined(CONFIG_SOC_KEYSTONE) 189 serial_out(UART_REG_VAL_PWREMU_MGMT_UART_ENABLE, &com_port->regC); 190 #endif 191 } 192 193 #ifndef CONFIG_NS16550_MIN_FUNCTIONS 194 void NS16550_reinit(NS16550_t com_port, int baud_divisor) 195 { 196 serial_out(CONFIG_SYS_NS16550_IER, &com_port->ier); 197 NS16550_setbrg(com_port, 0); 198 serial_out(UART_MCRVAL, &com_port->mcr); 199 serial_out(ns16550_getfcr(com_port), &com_port->fcr); 200 NS16550_setbrg(com_port, baud_divisor); 201 } 202 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */ 203 204 void NS16550_putc(NS16550_t com_port, char c) 205 { 206 while ((serial_in(&com_port->lsr) & UART_LSR_THRE) == 0) 207 ; 208 serial_out(c, &com_port->thr); 209 210 /* 211 * Call watchdog_reset() upon newline. This is done here in putc 212 * since the environment code uses a single puts() to print the complete 213 * environment upon "printenv". So we can't put this watchdog call 214 * in puts(). 215 */ 216 if (c == '\n') 217 WATCHDOG_RESET(); 218 } 219 220 #ifndef CONFIG_NS16550_MIN_FUNCTIONS 221 char NS16550_getc(NS16550_t com_port) 222 { 223 while ((serial_in(&com_port->lsr) & UART_LSR_DR) == 0) { 224 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_USB_TTY) 225 extern void usbtty_poll(void); 226 usbtty_poll(); 227 #endif 228 WATCHDOG_RESET(); 229 } 230 return serial_in(&com_port->rbr); 231 } 232 233 int NS16550_tstc(NS16550_t com_port) 234 { 235 return (serial_in(&com_port->lsr) & UART_LSR_DR) != 0; 236 } 237 238 #endif /* CONFIG_NS16550_MIN_FUNCTIONS */ 239 240 #ifdef CONFIG_DEBUG_UART_NS16550 241 242 #include <debug_uart.h> 243 244 static inline void _debug_uart_init(void) 245 { 246 struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE; 247 int baud_divisor; 248 249 /* 250 * We copy the code from above because it is already horribly messy. 251 * Trying to refactor to nicely remove the duplication doesn't seem 252 * feasible. The better fix is to move all users of this driver to 253 * driver model. 254 */ 255 baud_divisor = ns16550_calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK, 256 CONFIG_BAUDRATE); 257 258 if (gd && gd->serial.using_pre_serial) { 259 com_port = (struct NS16550 *)gd->serial.addr; 260 baud_divisor = ns16550_calc_divisor(com_port, 261 CONFIG_DEBUG_UART_CLOCK, gd->serial.baudrate); 262 } 263 264 serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER); 265 serial_dout(&com_port->mcr, UART_MCRVAL); 266 serial_dout(&com_port->fcr, UART_FCR_DEFVAL); 267 268 serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL); 269 serial_dout(&com_port->dll, baud_divisor & 0xff); 270 serial_dout(&com_port->dlm, (baud_divisor >> 8) & 0xff); 271 serial_dout(&com_port->lcr, UART_LCRVAL); 272 } 273 274 static inline void _debug_uart_putc(int ch) 275 { 276 struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE; 277 278 if (gd && gd->serial.using_pre_serial) 279 com_port = (struct NS16550 *)gd->serial.addr; 280 281 while (!(serial_din(&com_port->lsr) & UART_LSR_THRE)) 282 ; 283 serial_dout(&com_port->thr, ch); 284 } 285 286 DEBUG_UART_FUNCS 287 288 #endif 289 290 #ifdef CONFIG_DEBUG_UART_OMAP 291 292 #include <debug_uart.h> 293 294 static inline void _debug_uart_init(void) 295 { 296 struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE; 297 int baud_divisor; 298 299 baud_divisor = ns16550_calc_divisor(com_port, CONFIG_DEBUG_UART_CLOCK, 300 CONFIG_BAUDRATE); 301 302 if (gd && gd->serial.using_pre_serial) { 303 com_port = (struct NS16550 *)gd->serial.addr; 304 baud_divisor = ns16550_calc_divisor(com_port, 305 CONFIG_DEBUG_UART_CLOCK, gd->serial.baudrate); 306 } 307 308 serial_dout(&com_port->ier, CONFIG_SYS_NS16550_IER); 309 serial_dout(&com_port->mdr1, 0x7); 310 serial_dout(&com_port->mcr, UART_MCRVAL); 311 serial_dout(&com_port->fcr, UART_FCR_DEFVAL); 312 313 serial_dout(&com_port->lcr, UART_LCR_BKSE | UART_LCRVAL); 314 serial_dout(&com_port->dll, baud_divisor & 0xff); 315 serial_dout(&com_port->dlm, (baud_divisor >> 8) & 0xff); 316 serial_dout(&com_port->lcr, UART_LCRVAL); 317 serial_dout(&com_port->mdr1, 0x0); 318 } 319 320 static inline void _debug_uart_putc(int ch) 321 { 322 struct NS16550 *com_port = (struct NS16550 *)CONFIG_DEBUG_UART_BASE; 323 324 if (gd && gd->serial.using_pre_serial) 325 com_port = (struct NS16550 *)gd->serial.addr; 326 327 while (!(serial_din(&com_port->lsr) & UART_LSR_THRE)) 328 ; 329 serial_dout(&com_port->thr, ch); 330 } 331 332 DEBUG_UART_FUNCS 333 334 #endif 335 336 #ifdef CONFIG_DM_SERIAL 337 static int ns16550_serial_putc(struct udevice *dev, const char ch) 338 { 339 struct NS16550 *const com_port = dev_get_priv(dev); 340 341 #ifdef CONFIG_ARCH_ROCKCHIP 342 /* 343 * Use fifo function. 344 * 345 * UART_USR: bit1 trans_fifo_not_full: 346 * 0 = Transmit FIFO is full; 347 * 1 = Transmit FIFO is not full; 348 */ 349 while (!(serial_in(&com_port->rbr + 0x1f) & 0x02)) 350 ; 351 #else 352 if (!(serial_in(&com_port->lsr) & UART_LSR_THRE)) 353 return -EAGAIN; 354 #endif 355 serial_out(ch, &com_port->thr); 356 357 /* 358 * Call watchdog_reset() upon newline. This is done here in putc 359 * since the environment code uses a single puts() to print the complete 360 * environment upon "printenv". So we can't put this watchdog call 361 * in puts(). 362 */ 363 if (ch == '\n') 364 WATCHDOG_RESET(); 365 366 return 0; 367 } 368 369 static int ns16550_serial_pending(struct udevice *dev, bool input) 370 { 371 struct NS16550 *const com_port = dev_get_priv(dev); 372 373 if (input) 374 return serial_in(&com_port->lsr) & UART_LSR_DR ? 1 : 0; 375 else 376 return serial_in(&com_port->lsr) & UART_LSR_THRE ? 0 : 1; 377 } 378 379 static int ns16550_serial_getc(struct udevice *dev) 380 { 381 struct NS16550 *const com_port = dev_get_priv(dev); 382 383 if (!(serial_in(&com_port->lsr) & UART_LSR_DR)) 384 return -EAGAIN; 385 386 return serial_in(&com_port->rbr); 387 } 388 389 static int ns16550_serial_setbrg(struct udevice *dev, int baudrate) 390 { 391 struct NS16550 *const com_port = dev_get_priv(dev); 392 struct ns16550_platdata *plat = com_port->plat; 393 int clock_divisor; 394 395 clock_divisor = ns16550_calc_divisor(com_port, plat->clock, baudrate); 396 397 NS16550_setbrg(com_port, clock_divisor); 398 399 return 0; 400 } 401 402 static int ns16550_serial_clear(struct udevice *dev) 403 { 404 #ifdef CONFIG_ARCH_ROCKCHIP 405 struct NS16550 *const com_port = dev_get_priv(dev); 406 407 /* 408 * Wait fifo flush. 409 * 410 * UART_USR: bit2 trans_fifo_empty: 411 * 0 = Transmit FIFO is not empty 412 * 1 = Transmit FIFO is empty 413 */ 414 while (!(serial_in(&com_port->rbr + 0x1f) & 0x04)) 415 ; 416 #endif 417 return 0; 418 } 419 420 int ns16550_serial_probe(struct udevice *dev) 421 { 422 struct NS16550 *const com_port = dev_get_priv(dev); 423 424 com_port->plat = dev_get_platdata(dev); 425 NS16550_init(com_port, -1); 426 427 return 0; 428 } 429 430 #if CONFIG_IS_ENABLED(OF_CONTROL) 431 enum { 432 PORT_NS16550 = 0, 433 PORT_JZ4780, 434 }; 435 #endif 436 437 #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) 438 int ns16550_serial_ofdata_to_platdata(struct udevice *dev) 439 { 440 struct ns16550_platdata *plat = dev->platdata; 441 const u32 port_type = dev_get_driver_data(dev); 442 fdt_addr_t addr; 443 struct clk clk; 444 int err; 445 446 /* try Processor Local Bus device first */ 447 addr = dev_read_addr(dev); 448 #if defined(CONFIG_PCI) && defined(CONFIG_DM_PCI) 449 if (addr == FDT_ADDR_T_NONE) { 450 /* then try pci device */ 451 struct fdt_pci_addr pci_addr; 452 u32 bar; 453 int ret; 454 455 /* we prefer to use a memory-mapped register */ 456 ret = fdtdec_get_pci_addr(gd->fdt_blob, dev_of_offset(dev), 457 FDT_PCI_SPACE_MEM32, "reg", 458 &pci_addr); 459 if (ret) { 460 /* try if there is any i/o-mapped register */ 461 ret = fdtdec_get_pci_addr(gd->fdt_blob, 462 dev_of_offset(dev), 463 FDT_PCI_SPACE_IO, 464 "reg", &pci_addr); 465 if (ret) 466 return ret; 467 } 468 469 ret = fdtdec_get_pci_bar32(dev, &pci_addr, &bar); 470 if (ret) 471 return ret; 472 473 addr = bar; 474 } 475 #endif 476 477 if (addr == FDT_ADDR_T_NONE) 478 return -EINVAL; 479 480 #ifdef CONFIG_SYS_NS16550_PORT_MAPPED 481 plat->base = addr; 482 #else 483 484 if (gd && gd->serial.using_pre_serial) 485 addr = gd->serial.addr; 486 487 plat->base = (unsigned long)map_physmem(addr, 0, MAP_NOCACHE); 488 #endif 489 490 plat->reg_offset = dev_read_u32_default(dev, "reg-offset", 0); 491 plat->reg_shift = dev_read_u32_default(dev, "reg-shift", 0); 492 493 err = clk_get_by_index(dev, 0, &clk); 494 if (!err) { 495 err = clk_get_rate(&clk); 496 if (!IS_ERR_VALUE(err)) 497 plat->clock = err; 498 } else if (err != -ENOENT && err != -ENODEV && err != -ENOSYS) { 499 debug("ns16550 failed to get clock\n"); 500 #ifdef CONFIG_USING_KERNEL_DTB 501 /* With kernel dtb support, serial ofnode not able to get cru phandle */ 502 if(err != -EINVAL) 503 #endif 504 return err; 505 } 506 507 if (!plat->clock) 508 plat->clock = dev_read_u32_default(dev, "clock-frequency", 509 CONFIG_SYS_NS16550_CLK); 510 if (!plat->clock) { 511 debug("ns16550 clock not defined\n"); 512 return -EINVAL; 513 } 514 515 plat->fcr = UART_FCR_DEFVAL; 516 if (port_type == PORT_JZ4780) 517 plat->fcr |= UART_FCR_UME; 518 519 return 0; 520 } 521 #endif 522 523 const struct dm_serial_ops ns16550_serial_ops = { 524 .putc = ns16550_serial_putc, 525 .pending = ns16550_serial_pending, 526 .getc = ns16550_serial_getc, 527 .setbrg = ns16550_serial_setbrg, 528 .clear = ns16550_serial_clear, 529 }; 530 531 #if CONFIG_IS_ENABLED(SERIAL_PRESENT) 532 #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) 533 /* 534 * Please consider existing compatible strings before adding a new 535 * one to keep this table compact. Or you may add a generic "ns16550" 536 * compatible string to your dts. 537 */ 538 static const struct udevice_id ns16550_serial_ids[] = { 539 { .compatible = "ns16550", .data = PORT_NS16550 }, 540 { .compatible = "ns16550a", .data = PORT_NS16550 }, 541 { .compatible = "ingenic,jz4780-uart", .data = PORT_JZ4780 }, 542 { .compatible = "nvidia,tegra20-uart", .data = PORT_NS16550 }, 543 { .compatible = "snps,dw-apb-uart", .data = PORT_NS16550 }, 544 { .compatible = "ti,omap2-uart", .data = PORT_NS16550 }, 545 { .compatible = "ti,omap3-uart", .data = PORT_NS16550 }, 546 { .compatible = "ti,omap4-uart", .data = PORT_NS16550 }, 547 { .compatible = "ti,am3352-uart", .data = PORT_NS16550 }, 548 { .compatible = "ti,am4372-uart", .data = PORT_NS16550 }, 549 { .compatible = "ti,dra742-uart", .data = PORT_NS16550 }, 550 {} 551 }; 552 #endif /* OF_CONTROL && !OF_PLATDATA */ 553 554 /* TODO(sjg@chromium.org): Integrate this into a macro like CONFIG_IS_ENABLED */ 555 #if !defined(CONFIG_TPL_BUILD) || defined(CONFIG_TPL_DM_SERIAL) 556 U_BOOT_DRIVER(ns16550_serial) = { 557 .name = "ns16550_serial", 558 .id = UCLASS_SERIAL, 559 #if CONFIG_IS_ENABLED(OF_CONTROL) && !CONFIG_IS_ENABLED(OF_PLATDATA) 560 .of_match = ns16550_serial_ids, 561 .ofdata_to_platdata = ns16550_serial_ofdata_to_platdata, 562 .platdata_auto_alloc_size = sizeof(struct ns16550_platdata), 563 #endif 564 .priv_auto_alloc_size = sizeof(struct NS16550), 565 .probe = ns16550_serial_probe, 566 .ops = &ns16550_serial_ops, 567 .flags = DM_FLAG_PRE_RELOC, 568 }; 569 #endif 570 #endif /* SERIAL_PRESENT */ 571 572 #endif /* CONFIG_DM_SERIAL */ 573