1 /*********************************************************************** 2 * 3 * Copyright (c) 2005 Freescale Semiconductor, Inc. 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 * 23 * Description: 24 * Ethernet interface for Tundra TSI108 bridge chip 25 * 26 ***********************************************************************/ 27 28 #include <config.h> 29 30 #if !defined(CONFIG_TSI108_ETH_NUM_PORTS) || (CONFIG_TSI108_ETH_NUM_PORTS > 2) 31 #error "CONFIG_TSI108_ETH_NUM_PORTS must be defined as 1 or 2" 32 #endif 33 34 #include <common.h> 35 #include <malloc.h> 36 #include <net.h> 37 #include <netdev.h> 38 #include <asm/cache.h> 39 40 #ifdef DEBUG 41 #define TSI108_ETH_DEBUG 7 42 #else 43 #define TSI108_ETH_DEBUG 0 44 #endif 45 46 #if TSI108_ETH_DEBUG > 0 47 #define debug_lev(lev, fmt, args...) \ 48 if (lev <= TSI108_ETH_DEBUG) \ 49 printf ("%s %d: " fmt, __FUNCTION__, __LINE__, ##args) 50 #else 51 #define debug_lev(lev, fmt, args...) do{}while(0) 52 #endif 53 54 #define RX_PRINT_ERRORS 55 #define TX_PRINT_ERRORS 56 57 #define ETH_BASE (CONFIG_SYS_TSI108_CSR_BASE + 0x6000) 58 59 #define ETH_PORT_OFFSET 0x400 60 61 #define __REG32(base, offset) (*((volatile u32 *)((char *)(base) + (offset)))) 62 63 #define reg_MAC_CONFIG_1(base) __REG32(base, 0x00000000) 64 #define MAC_CONFIG_1_TX_ENABLE (0x00000001) 65 #define MAC_CONFIG_1_SYNC_TX_ENABLE (0x00000002) 66 #define MAC_CONFIG_1_RX_ENABLE (0x00000004) 67 #define MAC_CONFIG_1_SYNC_RX_ENABLE (0x00000008) 68 #define MAC_CONFIG_1_TX_FLOW_CONTROL (0x00000010) 69 #define MAC_CONFIG_1_RX_FLOW_CONTROL (0x00000020) 70 #define MAC_CONFIG_1_LOOP_BACK (0x00000100) 71 #define MAC_CONFIG_1_RESET_TX_FUNCTION (0x00010000) 72 #define MAC_CONFIG_1_RESET_RX_FUNCTION (0x00020000) 73 #define MAC_CONFIG_1_RESET_TX_MAC (0x00040000) 74 #define MAC_CONFIG_1_RESET_RX_MAC (0x00080000) 75 #define MAC_CONFIG_1_SIM_RESET (0x40000000) 76 #define MAC_CONFIG_1_SOFT_RESET (0x80000000) 77 78 #define reg_MAC_CONFIG_2(base) __REG32(base, 0x00000004) 79 #define MAC_CONFIG_2_FULL_DUPLEX (0x00000001) 80 #define MAC_CONFIG_2_CRC_ENABLE (0x00000002) 81 #define MAC_CONFIG_2_PAD_CRC (0x00000004) 82 #define MAC_CONFIG_2_LENGTH_CHECK (0x00000010) 83 #define MAC_CONFIG_2_HUGE_FRAME (0x00000020) 84 #define MAC_CONFIG_2_INTERFACE_MODE(val) (((val) & 0x3) << 8) 85 #define MAC_CONFIG_2_PREAMBLE_LENGTH(val) (((val) & 0xf) << 12) 86 #define INTERFACE_MODE_NIBBLE 1 /* 10/100 Mb/s MII) */ 87 #define INTERFACE_MODE_BYTE 2 /* 1000 Mb/s GMII/TBI */ 88 89 #define reg_MAXIMUM_FRAME_LENGTH(base) __REG32(base, 0x00000010) 90 91 #define reg_MII_MGMT_CONFIG(base) __REG32(base, 0x00000020) 92 #define MII_MGMT_CONFIG_MGMT_CLOCK_SELECT(val) ((val) & 0x7) 93 #define MII_MGMT_CONFIG_NO_PREAMBLE (0x00000010) 94 #define MII_MGMT_CONFIG_SCAN_INCREMENT (0x00000020) 95 #define MII_MGMT_CONFIG_RESET_MGMT (0x80000000) 96 97 #define reg_MII_MGMT_COMMAND(base) __REG32(base, 0x00000024) 98 #define MII_MGMT_COMMAND_READ_CYCLE (0x00000001) 99 #define MII_MGMT_COMMAND_SCAN_CYCLE (0x00000002) 100 101 #define reg_MII_MGMT_ADDRESS(base) __REG32(base, 0x00000028) 102 #define reg_MII_MGMT_CONTROL(base) __REG32(base, 0x0000002c) 103 #define reg_MII_MGMT_STATUS(base) __REG32(base, 0x00000030) 104 105 #define reg_MII_MGMT_INDICATORS(base) __REG32(base, 0x00000034) 106 #define MII_MGMT_INDICATORS_BUSY (0x00000001) 107 #define MII_MGMT_INDICATORS_SCAN (0x00000002) 108 #define MII_MGMT_INDICATORS_NOT_VALID (0x00000004) 109 110 #define reg_INTERFACE_STATUS(base) __REG32(base, 0x0000003c) 111 #define INTERFACE_STATUS_LINK_FAIL (0x00000008) 112 #define INTERFACE_STATUS_EXCESS_DEFER (0x00000200) 113 114 #define reg_STATION_ADDRESS_1(base) __REG32(base, 0x00000040) 115 #define reg_STATION_ADDRESS_2(base) __REG32(base, 0x00000044) 116 117 #define reg_PORT_CONTROL(base) __REG32(base, 0x00000200) 118 #define PORT_CONTROL_PRI (0x00000001) 119 #define PORT_CONTROL_BPT (0x00010000) 120 #define PORT_CONTROL_SPD (0x00040000) 121 #define PORT_CONTROL_RBC (0x00080000) 122 #define PORT_CONTROL_PRB (0x00200000) 123 #define PORT_CONTROL_DIS (0x00400000) 124 #define PORT_CONTROL_TBI (0x00800000) 125 #define PORT_CONTROL_STE (0x10000000) 126 #define PORT_CONTROL_ZOR (0x20000000) 127 #define PORT_CONTROL_CLR (0x40000000) 128 #define PORT_CONTROL_SRT (0x80000000) 129 130 #define reg_TX_CONFIG(base) __REG32(base, 0x00000220) 131 #define TX_CONFIG_START_Q (0x00000003) 132 #define TX_CONFIG_EHP (0x00400000) 133 #define TX_CONFIG_CHP (0x00800000) 134 #define TX_CONFIG_RST (0x80000000) 135 136 #define reg_TX_CONTROL(base) __REG32(base, 0x00000224) 137 #define TX_CONTROL_GO (0x00008000) 138 #define TX_CONTROL_MP (0x01000000) 139 #define TX_CONTROL_EAI (0x20000000) 140 #define TX_CONTROL_ABT (0x40000000) 141 #define TX_CONTROL_EII (0x80000000) 142 143 #define reg_TX_STATUS(base) __REG32(base, 0x00000228) 144 #define TX_STATUS_QUEUE_USABLE (0x0000000f) 145 #define TX_STATUS_CURR_Q (0x00000300) 146 #define TX_STATUS_ACT (0x00008000) 147 #define TX_STATUS_QUEUE_IDLE (0x000f0000) 148 #define TX_STATUS_EOQ_PENDING (0x0f000000) 149 150 #define reg_TX_EXTENDED_STATUS(base) __REG32(base, 0x0000022c) 151 #define TX_EXTENDED_STATUS_END_OF_QUEUE_CONDITION (0x0000000f) 152 #define TX_EXTENDED_STATUS_END_OF_FRAME_CONDITION (0x00000f00) 153 #define TX_EXTENDED_STATUS_DESCRIPTOR_INTERRUPT_CONDITION (0x000f0000) 154 #define TX_EXTENDED_STATUS_ERROR_FLAG (0x0f000000) 155 156 #define reg_TX_THRESHOLDS(base) __REG32(base, 0x00000230) 157 158 #define reg_TX_DIAGNOSTIC_ADDR(base) __REG32(base, 0x00000270) 159 #define TX_DIAGNOSTIC_ADDR_INDEX (0x0000007f) 160 #define TX_DIAGNOSTIC_ADDR_DFR (0x40000000) 161 #define TX_DIAGNOSTIC_ADDR_AI (0x80000000) 162 163 #define reg_TX_DIAGNOSTIC_DATA(base) __REG32(base, 0x00000274) 164 165 #define reg_TX_ERROR_STATUS(base) __REG32(base, 0x00000278) 166 #define TX_ERROR_STATUS (0x00000278) 167 #define TX_ERROR_STATUS_QUEUE_0_ERROR_RESPONSE (0x0000000f) 168 #define TX_ERROR_STATUS_TEA_ON_QUEUE_0 (0x00000010) 169 #define TX_ERROR_STATUS_RER_ON_QUEUE_0 (0x00000020) 170 #define TX_ERROR_STATUS_TER_ON_QUEUE_0 (0x00000040) 171 #define TX_ERROR_STATUS_DER_ON_QUEUE_0 (0x00000080) 172 #define TX_ERROR_STATUS_QUEUE_1_ERROR_RESPONSE (0x00000f00) 173 #define TX_ERROR_STATUS_TEA_ON_QUEUE_1 (0x00001000) 174 #define TX_ERROR_STATUS_RER_ON_QUEUE_1 (0x00002000) 175 #define TX_ERROR_STATUS_TER_ON_QUEUE_1 (0x00004000) 176 #define TX_ERROR_STATUS_DER_ON_QUEUE_1 (0x00008000) 177 #define TX_ERROR_STATUS_QUEUE_2_ERROR_RESPONSE (0x000f0000) 178 #define TX_ERROR_STATUS_TEA_ON_QUEUE_2 (0x00100000) 179 #define TX_ERROR_STATUS_RER_ON_QUEUE_2 (0x00200000) 180 #define TX_ERROR_STATUS_TER_ON_QUEUE_2 (0x00400000) 181 #define TX_ERROR_STATUS_DER_ON_QUEUE_2 (0x00800000) 182 #define TX_ERROR_STATUS_QUEUE_3_ERROR_RESPONSE (0x0f000000) 183 #define TX_ERROR_STATUS_TEA_ON_QUEUE_3 (0x10000000) 184 #define TX_ERROR_STATUS_RER_ON_QUEUE_3 (0x20000000) 185 #define TX_ERROR_STATUS_TER_ON_QUEUE_3 (0x40000000) 186 #define TX_ERROR_STATUS_DER_ON_QUEUE_3 (0x80000000) 187 188 #define reg_TX_QUEUE_0_CONFIG(base) __REG32(base, 0x00000280) 189 #define TX_QUEUE_0_CONFIG_OCN_PORT (0x0000003f) 190 #define TX_QUEUE_0_CONFIG_BSWP (0x00000400) 191 #define TX_QUEUE_0_CONFIG_WSWP (0x00000800) 192 #define TX_QUEUE_0_CONFIG_AM (0x00004000) 193 #define TX_QUEUE_0_CONFIG_GVI (0x00008000) 194 #define TX_QUEUE_0_CONFIG_EEI (0x00010000) 195 #define TX_QUEUE_0_CONFIG_ELI (0x00020000) 196 #define TX_QUEUE_0_CONFIG_ENI (0x00040000) 197 #define TX_QUEUE_0_CONFIG_ESI (0x00080000) 198 #define TX_QUEUE_0_CONFIG_EDI (0x00100000) 199 200 #define reg_TX_QUEUE_0_BUF_CONFIG(base) __REG32(base, 0x00000284) 201 #define TX_QUEUE_0_BUF_CONFIG_OCN_PORT (0x0000003f) 202 #define TX_QUEUE_0_BUF_CONFIG_BURST (0x00000300) 203 #define TX_QUEUE_0_BUF_CONFIG_BSWP (0x00000400) 204 #define TX_QUEUE_0_BUF_CONFIG_WSWP (0x00000800) 205 206 #define OCN_PORT_HLP 0 /* HLP Interface */ 207 #define OCN_PORT_PCI_X 1 /* PCI-X Interface */ 208 #define OCN_PORT_PROCESSOR_MASTER 2 /* Processor Interface (master) */ 209 #define OCN_PORT_PROCESSOR_SLAVE 3 /* Processor Interface (slave) */ 210 #define OCN_PORT_MEMORY 4 /* Memory Controller */ 211 #define OCN_PORT_DMA 5 /* DMA Controller */ 212 #define OCN_PORT_ETHERNET 6 /* Ethernet Controller */ 213 #define OCN_PORT_PRINT 7 /* Print Engine Interface */ 214 215 #define reg_TX_QUEUE_0_PTR_LOW(base) __REG32(base, 0x00000288) 216 217 #define reg_TX_QUEUE_0_PTR_HIGH(base) __REG32(base, 0x0000028c) 218 #define TX_QUEUE_0_PTR_HIGH_VALID (0x80000000) 219 220 #define reg_RX_CONFIG(base) __REG32(base, 0x00000320) 221 #define RX_CONFIG_DEF_Q (0x00000003) 222 #define RX_CONFIG_EMF (0x00000100) 223 #define RX_CONFIG_EUF (0x00000200) 224 #define RX_CONFIG_BFE (0x00000400) 225 #define RX_CONFIG_MFE (0x00000800) 226 #define RX_CONFIG_UFE (0x00001000) 227 #define RX_CONFIG_SE (0x00002000) 228 #define RX_CONFIG_ABF (0x00200000) 229 #define RX_CONFIG_APE (0x00400000) 230 #define RX_CONFIG_CHP (0x00800000) 231 #define RX_CONFIG_RST (0x80000000) 232 233 #define reg_RX_CONTROL(base) __REG32(base, 0x00000324) 234 #define GE_E0_RX_CONTROL_QUEUE_ENABLES (0x0000000f) 235 #define GE_E0_RX_CONTROL_GO (0x00008000) 236 #define GE_E0_RX_CONTROL_EAI (0x20000000) 237 #define GE_E0_RX_CONTROL_ABT (0x40000000) 238 #define GE_E0_RX_CONTROL_EII (0x80000000) 239 240 #define reg_RX_EXTENDED_STATUS(base) __REG32(base, 0x0000032c) 241 #define RX_EXTENDED_STATUS (0x0000032c) 242 #define RX_EXTENDED_STATUS_EOQ (0x0000000f) 243 #define RX_EXTENDED_STATUS_EOQ_0 (0x00000001) 244 #define RX_EXTENDED_STATUS_EOF (0x00000f00) 245 #define RX_EXTENDED_STATUS_DESCRIPTOR_INTERRUPT_CONDITION (0x000f0000) 246 #define RX_EXTENDED_STATUS_ERROR_FLAG (0x0f000000) 247 248 #define reg_RX_THRESHOLDS(base) __REG32(base, 0x00000330) 249 250 #define reg_RX_DIAGNOSTIC_ADDR(base) __REG32(base, 0x00000370) 251 #define RX_DIAGNOSTIC_ADDR_INDEX (0x0000007f) 252 #define RX_DIAGNOSTIC_ADDR_DFR (0x40000000) 253 #define RX_DIAGNOSTIC_ADDR_AI (0x80000000) 254 255 #define reg_RX_DIAGNOSTIC_DATA(base) __REG32(base, 0x00000374) 256 257 #define reg_RX_QUEUE_0_CONFIG(base) __REG32(base, 0x00000380) 258 #define RX_QUEUE_0_CONFIG_OCN_PORT (0x0000003f) 259 #define RX_QUEUE_0_CONFIG_BSWP (0x00000400) 260 #define RX_QUEUE_0_CONFIG_WSWP (0x00000800) 261 #define RX_QUEUE_0_CONFIG_AM (0x00004000) 262 #define RX_QUEUE_0_CONFIG_EEI (0x00010000) 263 #define RX_QUEUE_0_CONFIG_ELI (0x00020000) 264 #define RX_QUEUE_0_CONFIG_ENI (0x00040000) 265 #define RX_QUEUE_0_CONFIG_ESI (0x00080000) 266 #define RX_QUEUE_0_CONFIG_EDI (0x00100000) 267 268 #define reg_RX_QUEUE_0_BUF_CONFIG(base) __REG32(base, 0x00000384) 269 #define RX_QUEUE_0_BUF_CONFIG_OCN_PORT (0x0000003f) 270 #define RX_QUEUE_0_BUF_CONFIG_BURST (0x00000300) 271 #define RX_QUEUE_0_BUF_CONFIG_BSWP (0x00000400) 272 #define RX_QUEUE_0_BUF_CONFIG_WSWP (0x00000800) 273 274 #define reg_RX_QUEUE_0_PTR_LOW(base) __REG32(base, 0x00000388) 275 276 #define reg_RX_QUEUE_0_PTR_HIGH(base) __REG32(base, 0x0000038c) 277 #define RX_QUEUE_0_PTR_HIGH_VALID (0x80000000) 278 279 /* 280 * PHY register definitions 281 */ 282 /* the first 15 PHY registers are standard. */ 283 #define PHY_CTRL_REG 0 /* Control Register */ 284 #define PHY_STATUS_REG 1 /* Status Regiser */ 285 #define PHY_ID1_REG 2 /* Phy Id Reg (word 1) */ 286 #define PHY_ID2_REG 3 /* Phy Id Reg (word 2) */ 287 #define PHY_AN_ADV_REG 4 /* Autoneg Advertisement */ 288 #define PHY_LP_ABILITY_REG 5 /* Link Partner Ability (Base Page) */ 289 #define PHY_AUTONEG_EXP_REG 6 /* Autoneg Expansion Reg */ 290 #define PHY_NEXT_PAGE_TX_REG 7 /* Next Page TX */ 291 #define PHY_LP_NEXT_PAGE_REG 8 /* Link Partner Next Page */ 292 #define PHY_1000T_CTRL_REG 9 /* 1000Base-T Control Reg */ 293 #define PHY_1000T_STATUS_REG 10 /* 1000Base-T Status Reg */ 294 #define PHY_EXT_STATUS_REG 11 /* Extended Status Reg */ 295 296 /* 297 * PHY Register bit masks. 298 */ 299 #define PHY_CTRL_RESET (1 << 15) 300 #define PHY_CTRL_LOOPBACK (1 << 14) 301 #define PHY_CTRL_SPEED0 (1 << 13) 302 #define PHY_CTRL_AN_EN (1 << 12) 303 #define PHY_CTRL_PWR_DN (1 << 11) 304 #define PHY_CTRL_ISOLATE (1 << 10) 305 #define PHY_CTRL_RESTART_AN (1 << 9) 306 #define PHY_CTRL_FULL_DUPLEX (1 << 8) 307 #define PHY_CTRL_CT_EN (1 << 7) 308 #define PHY_CTRL_SPEED1 (1 << 6) 309 310 #define PHY_STAT_100BASE_T4 (1 << 15) 311 #define PHY_STAT_100BASE_X_FD (1 << 14) 312 #define PHY_STAT_100BASE_X_HD (1 << 13) 313 #define PHY_STAT_10BASE_T_FD (1 << 12) 314 #define PHY_STAT_10BASE_T_HD (1 << 11) 315 #define PHY_STAT_100BASE_T2_FD (1 << 10) 316 #define PHY_STAT_100BASE_T2_HD (1 << 9) 317 #define PHY_STAT_EXT_STAT (1 << 8) 318 #define PHY_STAT_RESERVED (1 << 7) 319 #define PHY_STAT_MFPS (1 << 6) /* Management Frames Preamble Suppression */ 320 #define PHY_STAT_AN_COMPLETE (1 << 5) 321 #define PHY_STAT_REM_FAULT (1 << 4) 322 #define PHY_STAT_AN_CAP (1 << 3) 323 #define PHY_STAT_LINK_UP (1 << 2) 324 #define PHY_STAT_JABBER (1 << 1) 325 #define PHY_STAT_EXT_CAP (1 << 0) 326 327 #define TBI_CONTROL_2 0x11 328 #define TBI_CONTROL_2_ENABLE_COMMA_DETECT 0x0001 329 #define TBI_CONTROL_2_ENABLE_WRAP 0x0002 330 #define TBI_CONTROL_2_G_MII_MODE 0x0010 331 #define TBI_CONTROL_2_RECEIVE_CLOCK_SELECT 0x0020 332 #define TBI_CONTROL_2_AUTO_NEGOTIATION_SENSE 0x0100 333 #define TBI_CONTROL_2_DISABLE_TRANSMIT_RUNNING_DISPARITY 0x1000 334 #define TBI_CONTROL_2_DISABLE_RECEIVE_RUNNING_DISPARITY 0x2000 335 #define TBI_CONTROL_2_SHORTCUT_LINK_TIMER 0x4000 336 #define TBI_CONTROL_2_SOFT_RESET 0x8000 337 338 /* marvel specific */ 339 #define MV1111_EXT_CTRL1_REG 16 /* PHY Specific Control Reg */ 340 #define MV1111_SPEC_STAT_REG 17 /* PHY Specific Status Reg */ 341 #define MV1111_EXT_CTRL2_REG 20 /* Extended PHY Specific Control Reg */ 342 343 /* 344 * MARVELL 88E1111 PHY register bit masks 345 */ 346 /* PHY Specific Status Register (MV1111_EXT_CTRL1_REG) */ 347 348 #define SPEC_STAT_SPEED_MASK (3 << 14) 349 #define SPEC_STAT_FULL_DUP (1 << 13) 350 #define SPEC_STAT_PAGE_RCVD (1 << 12) 351 #define SPEC_STAT_RESOLVED (1 << 11) /* Speed and Duplex Resolved */ 352 #define SPEC_STAT_LINK_UP (1 << 10) 353 #define SPEC_STAT_CABLE_LEN_MASK (7 << 7)/* Cable Length (100/1000 modes only) */ 354 #define SPEC_STAT_MDIX (1 << 6) 355 #define SPEC_STAT_POLARITY (1 << 1) 356 #define SPEC_STAT_JABBER (1 << 0) 357 358 #define SPEED_1000 (2 << 14) 359 #define SPEED_100 (1 << 14) 360 #define SPEED_10 (0 << 14) 361 362 #define TBI_ADDR 0x1E /* Ten Bit Interface address */ 363 364 /* negotiated link parameters */ 365 #define LINK_SPEED_UNKNOWN 0 366 #define LINK_SPEED_10 1 367 #define LINK_SPEED_100 2 368 #define LINK_SPEED_1000 3 369 370 #define LINK_DUPLEX_UNKNOWN 0 371 #define LINK_DUPLEX_HALF 1 372 #define LINK_DUPLEX_FULL 2 373 374 static unsigned int phy_address[] = { 8, 9 }; 375 376 #define vuint32 volatile u32 377 378 /* TX/RX buffer descriptors. MUST be cache line aligned in memory. (32 byte) 379 * This structure is accessed by the ethernet DMA engine which means it 380 * MUST be in LITTLE ENDIAN format */ 381 struct dma_descriptor { 382 vuint32 start_addr0; /* buffer address, least significant bytes. */ 383 vuint32 start_addr1; /* buffer address, most significant bytes. */ 384 vuint32 next_descr_addr0;/* next descriptor address, least significant bytes. Must be 64-bit aligned. */ 385 vuint32 next_descr_addr1;/* next descriptor address, most significant bytes. */ 386 vuint32 vlan_byte_count;/* VLAN tag(top 2 bytes) and byte countt (bottom 2 bytes). */ 387 vuint32 config_status; /* Configuration/Status. */ 388 vuint32 reserved1; /* reserved to make the descriptor cache line aligned. */ 389 vuint32 reserved2; /* reserved to make the descriptor cache line aligned. */ 390 }; 391 392 /* last next descriptor address flag */ 393 #define DMA_DESCR_LAST (1 << 31) 394 395 /* TX DMA descriptor config status bits */ 396 #define DMA_DESCR_TX_EOF (1 << 0) /* end of frame */ 397 #define DMA_DESCR_TX_SOF (1 << 1) /* start of frame */ 398 #define DMA_DESCR_TX_PFVLAN (1 << 2) 399 #define DMA_DESCR_TX_HUGE (1 << 3) 400 #define DMA_DESCR_TX_PAD (1 << 4) 401 #define DMA_DESCR_TX_CRC (1 << 5) 402 #define DMA_DESCR_TX_DESCR_INT (1 << 14) 403 #define DMA_DESCR_TX_RETRY_COUNT 0x000F0000 404 #define DMA_DESCR_TX_ONE_COLLISION (1 << 20) 405 #define DMA_DESCR_TX_LATE_COLLISION (1 << 24) 406 #define DMA_DESCR_TX_UNDERRUN (1 << 25) 407 #define DMA_DESCR_TX_RETRY_LIMIT (1 << 26) 408 #define DMA_DESCR_TX_OK (1 << 30) 409 #define DMA_DESCR_TX_OWNER (1 << 31) 410 411 /* RX DMA descriptor status bits */ 412 #define DMA_DESCR_RX_EOF (1 << 0) 413 #define DMA_DESCR_RX_SOF (1 << 1) 414 #define DMA_DESCR_RX_VTF (1 << 2) 415 #define DMA_DESCR_RX_FRAME_IS_TYPE (1 << 3) 416 #define DMA_DESCR_RX_SHORT_FRAME (1 << 4) 417 #define DMA_DESCR_RX_HASH_MATCH (1 << 7) 418 #define DMA_DESCR_RX_BAD_FRAME (1 << 8) 419 #define DMA_DESCR_RX_OVERRUN (1 << 9) 420 #define DMA_DESCR_RX_MAX_FRAME_LEN (1 << 11) 421 #define DMA_DESCR_RX_CRC_ERROR (1 << 12) 422 #define DMA_DESCR_RX_DESCR_INT (1 << 13) 423 #define DMA_DESCR_RX_OWNER (1 << 15) 424 425 #define RX_BUFFER_SIZE PKTSIZE 426 #define NUM_RX_DESC PKTBUFSRX 427 428 static struct dma_descriptor tx_descriptor __attribute__ ((aligned(32))); 429 430 static struct dma_descriptor rx_descr_array[NUM_RX_DESC] 431 __attribute__ ((aligned(32))); 432 433 static struct dma_descriptor *rx_descr_current; 434 435 static int tsi108_eth_probe (struct eth_device *dev, bd_t * bis); 436 static int tsi108_eth_send (struct eth_device *dev, 437 volatile void *packet, int length); 438 static int tsi108_eth_recv (struct eth_device *dev); 439 static void tsi108_eth_halt (struct eth_device *dev); 440 static unsigned int read_phy (unsigned int base, 441 unsigned int phy_addr, unsigned int phy_reg); 442 static void write_phy (unsigned int base, 443 unsigned int phy_addr, 444 unsigned int phy_reg, unsigned int phy_data); 445 446 #if TSI108_ETH_DEBUG > 100 447 /* 448 * print phy debug infomation 449 */ 450 static void dump_phy_regs (unsigned int phy_addr) 451 { 452 int i; 453 454 printf ("PHY %d registers\n", phy_addr); 455 for (i = 0; i <= 30; i++) { 456 printf ("%2d 0x%04x\n", i, read_phy (ETH_BASE, phy_addr, i)); 457 } 458 printf ("\n"); 459 460 } 461 #else 462 #define dump_phy_regs(base) do{}while(0) 463 #endif 464 465 #if TSI108_ETH_DEBUG > 100 466 /* 467 * print debug infomation 468 */ 469 static void tx_diag_regs (unsigned int base) 470 { 471 int i; 472 unsigned long dummy; 473 474 printf ("TX diagnostics registers\n"); 475 reg_TX_DIAGNOSTIC_ADDR(base) = 0x00 | TX_DIAGNOSTIC_ADDR_AI; 476 udelay (1000); 477 dummy = reg_TX_DIAGNOSTIC_DATA(base); 478 for (i = 0x00; i <= 0x05; i++) { 479 udelay (1000); 480 printf ("0x%02x 0x%08x\n", i, reg_TX_DIAGNOSTIC_DATA(base)); 481 } 482 reg_TX_DIAGNOSTIC_ADDR(base) = 0x40 | TX_DIAGNOSTIC_ADDR_AI; 483 udelay (1000); 484 dummy = reg_TX_DIAGNOSTIC_DATA(base); 485 for (i = 0x40; i <= 0x47; i++) { 486 udelay (1000); 487 printf ("0x%02x 0x%08x\n", i, reg_TX_DIAGNOSTIC_DATA(base)); 488 } 489 printf ("\n"); 490 491 } 492 #else 493 #define tx_diag_regs(base) do{}while(0) 494 #endif 495 496 #if TSI108_ETH_DEBUG > 100 497 /* 498 * print debug infomation 499 */ 500 static void rx_diag_regs (unsigned int base) 501 { 502 int i; 503 unsigned long dummy; 504 505 printf ("RX diagnostics registers\n"); 506 reg_RX_DIAGNOSTIC_ADDR(base) = 0x00 | RX_DIAGNOSTIC_ADDR_AI; 507 udelay (1000); 508 dummy = reg_RX_DIAGNOSTIC_DATA(base); 509 for (i = 0x00; i <= 0x05; i++) { 510 udelay (1000); 511 printf ("0x%02x 0x%08x\n", i, reg_RX_DIAGNOSTIC_DATA(base)); 512 } 513 reg_RX_DIAGNOSTIC_ADDR(base) = 0x40 | RX_DIAGNOSTIC_ADDR_AI; 514 udelay (1000); 515 dummy = reg_RX_DIAGNOSTIC_DATA(base); 516 for (i = 0x08; i <= 0x0a; i++) { 517 udelay (1000); 518 printf ("0x%02x 0x%08x\n", i, reg_RX_DIAGNOSTIC_DATA(base)); 519 } 520 printf ("\n"); 521 522 } 523 #else 524 #define rx_diag_regs(base) do{}while(0) 525 #endif 526 527 #if TSI108_ETH_DEBUG > 100 528 /* 529 * print debug infomation 530 */ 531 static void debug_mii_regs (unsigned int base) 532 { 533 printf ("MII_MGMT_CONFIG 0x%08x\n", reg_MII_MGMT_CONFIG(base)); 534 printf ("MII_MGMT_COMMAND 0x%08x\n", reg_MII_MGMT_COMMAND(base)); 535 printf ("MII_MGMT_ADDRESS 0x%08x\n", reg_MII_MGMT_ADDRESS(base)); 536 printf ("MII_MGMT_CONTROL 0x%08x\n", reg_MII_MGMT_CONTROL(base)); 537 printf ("MII_MGMT_STATUS 0x%08x\n", reg_MII_MGMT_STATUS(base)); 538 printf ("MII_MGMT_INDICATORS 0x%08x\n", reg_MII_MGMT_INDICATORS(base)); 539 printf ("\n"); 540 541 } 542 #else 543 #define debug_mii_regs(base) do{}while(0) 544 #endif 545 546 /* 547 * Wait until the phy bus is non-busy 548 */ 549 static void phy_wait (unsigned int base, unsigned int condition) 550 { 551 int timeout; 552 553 timeout = 0; 554 while (reg_MII_MGMT_INDICATORS(base) & condition) { 555 udelay (10); 556 if (++timeout > 10000) { 557 printf ("ERROR: timeout waiting for phy bus (%d)\n", 558 condition); 559 break; 560 } 561 } 562 } 563 564 /* 565 * read phy register 566 */ 567 static unsigned int read_phy (unsigned int base, 568 unsigned int phy_addr, unsigned int phy_reg) 569 { 570 unsigned int value; 571 572 phy_wait (base, MII_MGMT_INDICATORS_BUSY); 573 574 reg_MII_MGMT_ADDRESS(base) = (phy_addr << 8) | phy_reg; 575 576 /* Ensure that the Read Cycle bit is cleared prior to next read cycle */ 577 reg_MII_MGMT_COMMAND(base) = 0; 578 579 /* start the read */ 580 reg_MII_MGMT_COMMAND(base) = MII_MGMT_COMMAND_READ_CYCLE; 581 582 /* wait for the read to complete */ 583 phy_wait (base, 584 MII_MGMT_INDICATORS_NOT_VALID | MII_MGMT_INDICATORS_BUSY); 585 586 value = reg_MII_MGMT_STATUS(base); 587 588 reg_MII_MGMT_COMMAND(base) = 0; 589 590 return value; 591 } 592 593 /* 594 * write phy register 595 */ 596 static void write_phy (unsigned int base, 597 unsigned int phy_addr, 598 unsigned int phy_reg, unsigned int phy_data) 599 { 600 phy_wait (base, MII_MGMT_INDICATORS_BUSY); 601 602 reg_MII_MGMT_ADDRESS(base) = (phy_addr << 8) | phy_reg; 603 604 /* Ensure that the Read Cycle bit is cleared prior to next cycle */ 605 reg_MII_MGMT_COMMAND(base) = 0; 606 607 /* start the write */ 608 reg_MII_MGMT_CONTROL(base) = phy_data; 609 } 610 611 /* 612 * configure the marvell 88e1111 phy 613 */ 614 static int marvell_88e_phy_config (struct eth_device *dev, int *speed, 615 int *duplex) 616 { 617 unsigned long base; 618 unsigned long phy_addr; 619 unsigned int phy_status; 620 unsigned int phy_spec_status; 621 int timeout; 622 int phy_speed; 623 int phy_duplex; 624 unsigned int value; 625 626 phy_speed = LINK_SPEED_UNKNOWN; 627 phy_duplex = LINK_DUPLEX_UNKNOWN; 628 629 base = dev->iobase; 630 phy_addr = (unsigned long)dev->priv; 631 632 /* Take the PHY out of reset. */ 633 write_phy (ETH_BASE, phy_addr, PHY_CTRL_REG, PHY_CTRL_RESET); 634 635 /* Wait for the reset process to complete. */ 636 udelay (10); 637 timeout = 0; 638 while ((phy_status = 639 read_phy (ETH_BASE, phy_addr, PHY_CTRL_REG)) & PHY_CTRL_RESET) { 640 udelay (10); 641 if (++timeout > 10000) { 642 printf ("ERROR: timeout waiting for phy reset\n"); 643 break; 644 } 645 } 646 647 /* TBI Configuration. */ 648 write_phy (base, TBI_ADDR, TBI_CONTROL_2, TBI_CONTROL_2_G_MII_MODE | 649 TBI_CONTROL_2_RECEIVE_CLOCK_SELECT); 650 /* Wait for the link to be established. */ 651 timeout = 0; 652 do { 653 udelay (20000); 654 phy_status = read_phy (ETH_BASE, phy_addr, PHY_STATUS_REG); 655 if (++timeout > 100) { 656 debug_lev(1, "ERROR: unable to establish link!!!\n"); 657 break; 658 } 659 } while ((phy_status & PHY_STAT_LINK_UP) == 0); 660 661 if ((phy_status & PHY_STAT_LINK_UP) == 0) 662 return 0; 663 664 value = 0; 665 phy_spec_status = read_phy (ETH_BASE, phy_addr, MV1111_SPEC_STAT_REG); 666 if (phy_spec_status & SPEC_STAT_RESOLVED) { 667 switch (phy_spec_status & SPEC_STAT_SPEED_MASK) { 668 case SPEED_1000: 669 phy_speed = LINK_SPEED_1000; 670 value |= PHY_CTRL_SPEED1; 671 break; 672 case SPEED_100: 673 phy_speed = LINK_SPEED_100; 674 value |= PHY_CTRL_SPEED0; 675 break; 676 case SPEED_10: 677 phy_speed = LINK_SPEED_10; 678 break; 679 } 680 if (phy_spec_status & SPEC_STAT_FULL_DUP) { 681 phy_duplex = LINK_DUPLEX_FULL; 682 value |= PHY_CTRL_FULL_DUPLEX; 683 } else 684 phy_duplex = LINK_DUPLEX_HALF; 685 } 686 /* set TBI speed */ 687 write_phy (base, TBI_ADDR, PHY_CTRL_REG, value); 688 write_phy (base, TBI_ADDR, PHY_AN_ADV_REG, 0x0060); 689 690 #if TSI108_ETH_DEBUG > 0 691 printf ("%s link is up", dev->name); 692 phy_spec_status = read_phy (ETH_BASE, phy_addr, MV1111_SPEC_STAT_REG); 693 if (phy_spec_status & SPEC_STAT_RESOLVED) { 694 switch (phy_speed) { 695 case LINK_SPEED_1000: 696 printf (", 1000 Mbps"); 697 break; 698 case LINK_SPEED_100: 699 printf (", 100 Mbps"); 700 break; 701 case LINK_SPEED_10: 702 printf (", 10 Mbps"); 703 break; 704 } 705 if (phy_duplex == LINK_DUPLEX_FULL) 706 printf (", Full duplex"); 707 else 708 printf (", Half duplex"); 709 } 710 printf ("\n"); 711 #endif 712 713 dump_phy_regs (TBI_ADDR); 714 if (speed) 715 *speed = phy_speed; 716 if (duplex) 717 *duplex = phy_duplex; 718 719 return 1; 720 } 721 722 /* 723 * External interface 724 * 725 * register the tsi108 ethernet controllers with the multi-ethernet system 726 */ 727 int tsi108_eth_initialize (bd_t * bis) 728 { 729 struct eth_device *dev; 730 int index; 731 732 for (index = 0; index < CONFIG_TSI108_ETH_NUM_PORTS; index++) { 733 dev = (struct eth_device *)malloc(sizeof(struct eth_device)); 734 if (!dev) { 735 printf("tsi108: Can not allocate memory\n"); 736 break; 737 } 738 memset(dev, 0, sizeof(*dev)); 739 sprintf (dev->name, "TSI108_eth%d", index); 740 741 dev->iobase = ETH_BASE + (index * ETH_PORT_OFFSET); 742 dev->priv = (void *)(phy_address[index]); 743 dev->init = tsi108_eth_probe; 744 dev->halt = tsi108_eth_halt; 745 dev->send = tsi108_eth_send; 746 dev->recv = tsi108_eth_recv; 747 748 eth_register(dev); 749 } 750 return index; 751 } 752 753 /* 754 * probe for and initialize a single ethernet interface 755 */ 756 static int tsi108_eth_probe (struct eth_device *dev, bd_t * bis) 757 { 758 unsigned long base; 759 unsigned long value; 760 int index; 761 struct dma_descriptor *tx_descr; 762 struct dma_descriptor *rx_descr; 763 int speed; 764 int duplex; 765 766 base = dev->iobase; 767 768 reg_PORT_CONTROL(base) = PORT_CONTROL_STE | PORT_CONTROL_BPT; 769 770 /* Bring DMA/FIFO out of reset. */ 771 reg_TX_CONFIG(base) = 0x00000000; 772 reg_RX_CONFIG(base) = 0x00000000; 773 774 reg_TX_THRESHOLDS(base) = (192 << 16) | 192; 775 reg_RX_THRESHOLDS(base) = (192 << 16) | 112; 776 777 /* Bring MAC out of reset. */ 778 reg_MAC_CONFIG_1(base) = 0x00000000; 779 780 /* DMA MAC configuration. */ 781 reg_MAC_CONFIG_1(base) = 782 MAC_CONFIG_1_RX_ENABLE | MAC_CONFIG_1_TX_ENABLE; 783 784 reg_MII_MGMT_CONFIG(base) = MII_MGMT_CONFIG_NO_PREAMBLE; 785 reg_MAXIMUM_FRAME_LENGTH(base) = RX_BUFFER_SIZE; 786 787 /* Note: Early tsi108 manual did not have correct byte order 788 * for the station address.*/ 789 reg_STATION_ADDRESS_1(base) = (dev->enetaddr[5] << 24) | 790 (dev->enetaddr[4] << 16) | 791 (dev->enetaddr[3] << 8) | (dev->enetaddr[2] << 0); 792 793 reg_STATION_ADDRESS_2(base) = (dev->enetaddr[1] << 24) | 794 (dev->enetaddr[0] << 16); 795 796 if (marvell_88e_phy_config(dev, &speed, &duplex) == 0) 797 return -1; 798 799 value = 800 MAC_CONFIG_2_PREAMBLE_LENGTH(7) | MAC_CONFIG_2_PAD_CRC | 801 MAC_CONFIG_2_CRC_ENABLE; 802 if (speed == LINK_SPEED_1000) 803 value |= MAC_CONFIG_2_INTERFACE_MODE(INTERFACE_MODE_BYTE); 804 else { 805 value |= MAC_CONFIG_2_INTERFACE_MODE(INTERFACE_MODE_NIBBLE); 806 reg_PORT_CONTROL(base) |= PORT_CONTROL_SPD; 807 } 808 if (duplex == LINK_DUPLEX_FULL) { 809 value |= MAC_CONFIG_2_FULL_DUPLEX; 810 reg_PORT_CONTROL(base) &= ~PORT_CONTROL_BPT; 811 } else 812 reg_PORT_CONTROL(base) |= PORT_CONTROL_BPT; 813 reg_MAC_CONFIG_2(base) = value; 814 815 reg_RX_CONFIG(base) = RX_CONFIG_SE; 816 reg_RX_QUEUE_0_CONFIG(base) = OCN_PORT_MEMORY; 817 reg_RX_QUEUE_0_BUF_CONFIG(base) = OCN_PORT_MEMORY; 818 819 /* initialize the RX DMA descriptors */ 820 rx_descr = &rx_descr_array[0]; 821 rx_descr_current = rx_descr; 822 for (index = 0; index < NUM_RX_DESC; index++) { 823 /* make sure the receive buffers are not in cache */ 824 invalidate_dcache_range((unsigned long)NetRxPackets[index], 825 (unsigned long)NetRxPackets[index] + 826 RX_BUFFER_SIZE); 827 rx_descr->start_addr0 = 828 cpu_to_le32((vuint32) NetRxPackets[index]); 829 rx_descr->start_addr1 = 0; 830 rx_descr->next_descr_addr0 = 831 cpu_to_le32((vuint32) (rx_descr + 1)); 832 rx_descr->next_descr_addr1 = 0; 833 rx_descr->vlan_byte_count = 0; 834 rx_descr->config_status = cpu_to_le32((RX_BUFFER_SIZE << 16) | 835 DMA_DESCR_RX_OWNER); 836 rx_descr++; 837 } 838 rx_descr--; 839 rx_descr->next_descr_addr0 = 0; 840 rx_descr->next_descr_addr1 = cpu_to_le32(DMA_DESCR_LAST); 841 /* Push the descriptors to RAM so the ethernet DMA can see them */ 842 invalidate_dcache_range((unsigned long)rx_descr_array, 843 (unsigned long)rx_descr_array + 844 sizeof(rx_descr_array)); 845 846 /* enable RX queue */ 847 reg_RX_CONTROL(base) = TX_CONTROL_GO | 0x01; 848 reg_RX_QUEUE_0_PTR_LOW(base) = (u32) rx_descr_current; 849 /* enable receive DMA */ 850 reg_RX_QUEUE_0_PTR_HIGH(base) = RX_QUEUE_0_PTR_HIGH_VALID; 851 852 reg_TX_QUEUE_0_CONFIG(base) = OCN_PORT_MEMORY; 853 reg_TX_QUEUE_0_BUF_CONFIG(base) = OCN_PORT_MEMORY; 854 855 /* initialize the TX DMA descriptor */ 856 tx_descr = &tx_descriptor; 857 858 tx_descr->start_addr0 = 0; 859 tx_descr->start_addr1 = 0; 860 tx_descr->next_descr_addr0 = 0; 861 tx_descr->next_descr_addr1 = cpu_to_le32(DMA_DESCR_LAST); 862 tx_descr->vlan_byte_count = 0; 863 tx_descr->config_status = cpu_to_le32(DMA_DESCR_TX_OK | 864 DMA_DESCR_TX_SOF | 865 DMA_DESCR_TX_EOF); 866 /* enable TX queue */ 867 reg_TX_CONTROL(base) = TX_CONTROL_GO | 0x01; 868 869 return 0; 870 } 871 872 /* 873 * send a packet 874 */ 875 static int tsi108_eth_send (struct eth_device *dev, 876 volatile void *packet, int length) 877 { 878 unsigned long base; 879 int timeout; 880 struct dma_descriptor *tx_descr; 881 unsigned long status; 882 883 base = dev->iobase; 884 tx_descr = &tx_descriptor; 885 886 /* Wait until the last packet has been transmitted. */ 887 timeout = 0; 888 do { 889 /* make sure we see the changes made by the DMA engine */ 890 invalidate_dcache_range((unsigned long)tx_descr, 891 (unsigned long)tx_descr + 892 sizeof(struct dma_descriptor)); 893 894 if (timeout != 0) 895 udelay (15); 896 if (++timeout > 10000) { 897 tx_diag_regs(base); 898 debug_lev(1, 899 "ERROR: timeout waiting for last transmit packet to be sent\n"); 900 return 0; 901 } 902 } while (tx_descr->config_status & cpu_to_le32(DMA_DESCR_TX_OWNER)); 903 904 status = le32_to_cpu(tx_descr->config_status); 905 if ((status & DMA_DESCR_TX_OK) == 0) { 906 #ifdef TX_PRINT_ERRORS 907 printf ("TX packet error: 0x%08lx\n %s%s%s%s\n", status, 908 status & DMA_DESCR_TX_OK ? "tx error, " : "", 909 status & DMA_DESCR_TX_RETRY_LIMIT ? 910 "retry limit reached, " : "", 911 status & DMA_DESCR_TX_UNDERRUN ? "underrun, " : "", 912 status & DMA_DESCR_TX_LATE_COLLISION ? "late collision, " 913 : ""); 914 #endif 915 } 916 917 debug_lev (9, "sending packet %d\n", length); 918 tx_descr->start_addr0 = cpu_to_le32((vuint32) packet); 919 tx_descr->start_addr1 = 0; 920 tx_descr->next_descr_addr0 = 0; 921 tx_descr->next_descr_addr1 = cpu_to_le32(DMA_DESCR_LAST); 922 tx_descr->vlan_byte_count = cpu_to_le32(length); 923 tx_descr->config_status = cpu_to_le32(DMA_DESCR_TX_OWNER | 924 DMA_DESCR_TX_CRC | 925 DMA_DESCR_TX_PAD | 926 DMA_DESCR_TX_SOF | 927 DMA_DESCR_TX_EOF); 928 929 invalidate_dcache_range((unsigned long)tx_descr, 930 (unsigned long)tx_descr + 931 sizeof(struct dma_descriptor)); 932 933 invalidate_dcache_range((unsigned long)packet, 934 (unsigned long)packet + length); 935 936 reg_TX_QUEUE_0_PTR_LOW(base) = (u32) tx_descr; 937 reg_TX_QUEUE_0_PTR_HIGH(base) = TX_QUEUE_0_PTR_HIGH_VALID; 938 939 return length; 940 } 941 942 /* 943 * Check for received packets and send them up the protocal stack 944 */ 945 static int tsi108_eth_recv (struct eth_device *dev) 946 { 947 struct dma_descriptor *rx_descr; 948 unsigned long base; 949 int length = 0; 950 unsigned long status; 951 volatile uchar *buffer; 952 953 base = dev->iobase; 954 955 /* make sure we see the changes made by the DMA engine */ 956 invalidate_dcache_range ((unsigned long)rx_descr_array, 957 (unsigned long)rx_descr_array + 958 sizeof(rx_descr_array)); 959 960 /* process all of the received packets */ 961 rx_descr = rx_descr_current; 962 while ((rx_descr->config_status & cpu_to_le32(DMA_DESCR_RX_OWNER)) == 0) { 963 /* check for error */ 964 status = le32_to_cpu(rx_descr->config_status); 965 if (status & DMA_DESCR_RX_BAD_FRAME) { 966 #ifdef RX_PRINT_ERRORS 967 printf ("RX packet error: 0x%08lx\n %s%s%s%s%s%s\n", 968 status, 969 status & DMA_DESCR_RX_FRAME_IS_TYPE ? "too big, " 970 : "", 971 status & DMA_DESCR_RX_SHORT_FRAME ? "too short, " 972 : "", 973 status & DMA_DESCR_RX_BAD_FRAME ? "bad frame, " : 974 "", 975 status & DMA_DESCR_RX_OVERRUN ? "overrun, " : "", 976 status & DMA_DESCR_RX_MAX_FRAME_LEN ? 977 "max length, " : "", 978 status & DMA_DESCR_RX_CRC_ERROR ? "CRC error, " : 979 ""); 980 #endif 981 } else { 982 length = 983 le32_to_cpu(rx_descr->vlan_byte_count) & 0xFFFF; 984 985 /*** process packet ***/ 986 buffer = 987 (volatile uchar 988 *)(le32_to_cpu (rx_descr->start_addr0)); 989 NetReceive (buffer, length); 990 991 invalidate_dcache_range ((unsigned long)buffer, 992 (unsigned long)buffer + 993 RX_BUFFER_SIZE); 994 } 995 /* Give this buffer back to the DMA engine */ 996 rx_descr->vlan_byte_count = 0; 997 rx_descr->config_status = cpu_to_le32 ((RX_BUFFER_SIZE << 16) | 998 DMA_DESCR_RX_OWNER); 999 /* move descriptor pointer forward */ 1000 rx_descr = 1001 (struct dma_descriptor 1002 *)(le32_to_cpu (rx_descr->next_descr_addr0)); 1003 if (rx_descr == 0) 1004 rx_descr = &rx_descr_array[0]; 1005 } 1006 /* remember where we are for next time */ 1007 rx_descr_current = rx_descr; 1008 1009 /* If the DMA engine has reached the end of the queue 1010 * start over at the begining */ 1011 if (reg_RX_EXTENDED_STATUS(base) & RX_EXTENDED_STATUS_EOQ_0) { 1012 1013 reg_RX_EXTENDED_STATUS(base) = RX_EXTENDED_STATUS_EOQ_0; 1014 reg_RX_QUEUE_0_PTR_LOW(base) = (u32) & rx_descr_array[0]; 1015 reg_RX_QUEUE_0_PTR_HIGH(base) = RX_QUEUE_0_PTR_HIGH_VALID; 1016 } 1017 1018 return length; 1019 } 1020 1021 /* 1022 * disable an ethernet interface 1023 */ 1024 static void tsi108_eth_halt (struct eth_device *dev) 1025 { 1026 unsigned long base; 1027 1028 base = dev->iobase; 1029 1030 /* Put DMA/FIFO into reset state. */ 1031 reg_TX_CONFIG(base) = TX_CONFIG_RST; 1032 reg_RX_CONFIG(base) = RX_CONFIG_RST; 1033 1034 /* Put MAC into reset state. */ 1035 reg_MAC_CONFIG_1(base) = MAC_CONFIG_1_SOFT_RESET; 1036 } 1037