xref: /rk3399_rockchip-uboot/drivers/net/altera_tse.c (revision 15eb1069663676243a63a916fe482e751cd56deb)
1 /*
2  * Altera 10/100/1000 triple speed ethernet mac driver
3  *
4  * Copyright (C) 2008 Altera Corporation.
5  * Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw>
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License version 2 as
9  * published by the Free Software Foundation.
10  */
11 #include <config.h>
12 #include <common.h>
13 #include <malloc.h>
14 #include <net.h>
15 #include <command.h>
16 #include <asm/cache.h>
17 #include <asm/dma-mapping.h>
18 #include <miiphy.h>
19 #include "altera_tse.h"
20 
21 /* sgdma debug - print descriptor */
22 static void alt_sgdma_print_desc(volatile struct alt_sgdma_descriptor *desc)
23 {
24 	debug("SGDMA DEBUG :\n");
25 	debug("desc->source : 0x%x \n", (unsigned int)desc->source);
26 	debug("desc->destination : 0x%x \n", (unsigned int)desc->destination);
27 	debug("desc->next : 0x%x \n", (unsigned int)desc->next);
28 	debug("desc->source_pad : 0x%x \n", (unsigned int)desc->source_pad);
29 	debug("desc->destination_pad : 0x%x \n",
30 	      (unsigned int)desc->destination_pad);
31 	debug("desc->next_pad : 0x%x \n", (unsigned int)desc->next_pad);
32 	debug("desc->bytes_to_transfer : 0x%x \n",
33 	      (unsigned int)desc->bytes_to_transfer);
34 	debug("desc->actual_bytes_transferred : 0x%x \n",
35 	      (unsigned int)desc->actual_bytes_transferred);
36 	debug("desc->descriptor_status : 0x%x \n",
37 	      (unsigned int)desc->descriptor_status);
38 	debug("desc->descriptor_control : 0x%x \n",
39 	      (unsigned int)desc->descriptor_control);
40 }
41 
42 /* This is a generic routine that the SGDMA mode-specific routines
43  * call to populate a descriptor.
44  * arg1	    :pointer to first SGDMA descriptor.
45  * arg2	    :pointer to next  SGDMA descriptor.
46  * arg3	    :Address to where data to be written.
47  * arg4	    :Address from where data to be read.
48  * arg5	    :no of byte to transaction.
49  * arg6	    :variable indicating to generate start of packet or not
50  * arg7	    :read fixed
51  * arg8	    :write fixed
52  * arg9	    :read burst
53  * arg10    :write burst
54  * arg11    :atlantic_channel number
55  */
56 static void alt_sgdma_construct_descriptor_burst(
57 	volatile struct alt_sgdma_descriptor *desc,
58 	volatile struct alt_sgdma_descriptor *next,
59 	unsigned int *read_addr,
60 	unsigned int *write_addr,
61 	unsigned short length_or_eop,
62 	int generate_eop,
63 	int read_fixed,
64 	int write_fixed_or_sop,
65 	int read_burst,
66 	int write_burst,
67 	unsigned char atlantic_channel)
68 {
69 	/*
70 	 * Mark the "next" descriptor as "not" owned by hardware. This prevents
71 	 * The SGDMA controller from continuing to process the chain. This is
72 	 * done as a single IO write to bypass cache, without flushing
73 	 * the entire descriptor, since only the 8-bit descriptor status must
74 	 * be flushed.
75 	 */
76 	if (!next)
77 		debug("Next descriptor not defined!!\n");
78 
79 	next->descriptor_control = (next->descriptor_control &
80 		~ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK);
81 
82 	desc->source = (unsigned int *)((unsigned int)read_addr & 0x1FFFFFFF);
83 	desc->destination =
84 	    (unsigned int *)((unsigned int)write_addr & 0x1FFFFFFF);
85 	desc->next = (unsigned int *)((unsigned int)next & 0x1FFFFFFF);
86 	desc->source_pad = 0x0;
87 	desc->destination_pad = 0x0;
88 	desc->next_pad = 0x0;
89 	desc->bytes_to_transfer = length_or_eop;
90 	desc->actual_bytes_transferred = 0;
91 	desc->descriptor_status = 0x0;
92 
93 	/* SGDMA burst not currently supported */
94 	desc->read_burst = 0;
95 	desc->write_burst = 0;
96 
97 	/*
98 	 * Set the descriptor control block as follows:
99 	 * - Set "owned by hardware" bit
100 	 * - Optionally set "generate EOP" bit
101 	 * - Optionally set the "read from fixed address" bit
102 	 * - Optionally set the "write to fixed address bit (which serves
103 	 *   serves as a "generate SOP" control bit in memory-to-stream mode).
104 	 * - Set the 4-bit atlantic channel, if specified
105 	 *
106 	 * Note this step is performed after all other descriptor information
107 	 * has been filled out so that, if the controller already happens to be
108 	 * pointing at this descriptor, it will not run (via the "owned by
109 	 * hardware" bit) until all other descriptor has been set up.
110 	 */
111 
112 	desc->descriptor_control =
113 	    ((ALT_SGDMA_DESCRIPTOR_CONTROL_OWNED_BY_HW_MSK) |
114 	     (generate_eop ?
115 	      ALT_SGDMA_DESCRIPTOR_CONTROL_GENERATE_EOP_MSK : 0x0) |
116 	     (read_fixed ?
117 	      ALT_SGDMA_DESCRIPTOR_CONTROL_READ_FIXED_ADDRESS_MSK : 0x0) |
118 	     (write_fixed_or_sop ?
119 	      ALT_SGDMA_DESCRIPTOR_CONTROL_WRITE_FIXED_ADDRESS_MSK : 0x0) |
120 	     (atlantic_channel ? ((atlantic_channel & 0x0F) << 3) : 0)
121 		    );
122 }
123 
124 static int alt_sgdma_do_sync_transfer(volatile struct alt_sgdma_registers *dev,
125 			       volatile struct alt_sgdma_descriptor *desc)
126 {
127 	unsigned int status;
128 	int counter = 0;
129 
130 	/* Wait for any pending transfers to complete */
131 	alt_sgdma_print_desc(desc);
132 	status = dev->status;
133 
134 	counter = 0;
135 	while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK) {
136 		if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
137 			break;
138 	}
139 
140 	if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
141 		debug("Timeout waiting sgdma in do sync!\n");
142 
143 	/*
144 	 * Clear any (previous) status register information
145 	 * that might occlude our error checking later.
146 	 */
147 	dev->status = 0xFF;
148 
149 	/* Point the controller at the descriptor */
150 	dev->next_descriptor_pointer = (unsigned int)desc & 0x1FFFFFFF;
151 	debug("next desc in sgdma 0x%x\n",
152 	      (unsigned int)dev->next_descriptor_pointer);
153 
154 	/*
155 	 * Set up SGDMA controller to:
156 	 * - Disable interrupt generation
157 	 * - Run once a valid descriptor is written to controller
158 	 * - Stop on an error with any particular descriptor
159 	 */
160 	dev->control = (ALT_SGDMA_CONTROL_RUN_MSK |
161 			ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK);
162 
163 	/* Wait for the descriptor (chain) to complete */
164 	status = dev->status;
165 	debug("wait for sgdma....");
166 	while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK)
167 		;
168 	debug("done\n");
169 
170 	/* Clear Run */
171 	dev->control = (dev->control & (~ALT_SGDMA_CONTROL_RUN_MSK));
172 
173 	/* Get & clear status register contents */
174 	status = dev->status;
175 	dev->status = 0xFF;
176 
177 	/* we really should check if the transfer completes properly */
178 	debug("tx sgdma status = 0x%x", status);
179 	return 0;
180 }
181 
182 static int alt_sgdma_do_async_transfer(volatile struct alt_sgdma_registers *dev,
183 				volatile struct alt_sgdma_descriptor *desc)
184 {
185 	unsigned int status;
186 	int counter = 0;
187 
188 	/* Wait for any pending transfers to complete */
189 	alt_sgdma_print_desc(desc);
190 	status = dev->status;
191 
192 	counter = 0;
193 	while (dev->status & ALT_SGDMA_STATUS_BUSY_MSK) {
194 		if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
195 			break;
196 	}
197 
198 	if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
199 		debug("Timeout waiting sgdma in do async!\n");
200 
201 	/*
202 	 * Clear the RUN bit in the control register. This is needed
203 	 * to restart the SGDMA engine later on.
204 	 */
205 	dev->control = 0;
206 
207 	/*
208 	 * Clear any (previous) status register information
209 	 * that might occlude our error checking later.
210 	 */
211 	dev->status = 0xFF;
212 
213 	/* Point the controller at the descriptor */
214 	dev->next_descriptor_pointer = (unsigned int)desc & 0x1FFFFFFF;
215 
216 	/*
217 	 * Set up SGDMA controller to:
218 	 * - Disable interrupt generation
219 	 * - Run once a valid descriptor is written to controller
220 	 * - Stop on an error with any particular descriptor
221 	 */
222 	dev->control = (ALT_SGDMA_CONTROL_RUN_MSK |
223 			ALT_SGDMA_CONTROL_STOP_DMA_ER_MSK);
224 
225 	/* we really should check if the transfer completes properly */
226 	return 0;
227 }
228 
229 /* u-boot interface */
230 static int tse_adjust_link(struct altera_tse_priv *priv)
231 {
232 	unsigned int refvar;
233 
234 	refvar = priv->mac_dev->command_config.image;
235 
236 	if (!(priv->duplexity))
237 		refvar |= ALTERA_TSE_CMD_HD_ENA_MSK;
238 	else
239 		refvar &= ~ALTERA_TSE_CMD_HD_ENA_MSK;
240 
241 	switch (priv->speed) {
242 	case 1000:
243 		refvar |= ALTERA_TSE_CMD_ETH_SPEED_MSK;
244 		refvar &= ~ALTERA_TSE_CMD_ENA_10_MSK;
245 		break;
246 	case 100:
247 		refvar &= ~ALTERA_TSE_CMD_ETH_SPEED_MSK;
248 		refvar &= ~ALTERA_TSE_CMD_ENA_10_MSK;
249 		break;
250 	case 10:
251 		refvar &= ~ALTERA_TSE_CMD_ETH_SPEED_MSK;
252 		refvar |= ALTERA_TSE_CMD_ENA_10_MSK;
253 		break;
254 	}
255 	priv->mac_dev->command_config.image = refvar;
256 
257 	return 0;
258 }
259 
260 static int tse_eth_send(struct eth_device *dev,
261 			volatile void *packet, int length)
262 {
263 	struct altera_tse_priv *priv = dev->priv;
264 	volatile struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx;
265 	volatile struct alt_sgdma_descriptor *tx_desc =
266 	    (volatile struct alt_sgdma_descriptor *)priv->tx_desc;
267 
268 	volatile struct alt_sgdma_descriptor *tx_desc_cur =
269 	    (volatile struct alt_sgdma_descriptor *)&tx_desc[0];
270 
271 	flush_dcache((unsigned long)packet, length);
272 	alt_sgdma_construct_descriptor_burst(
273 		(volatile struct alt_sgdma_descriptor *)&tx_desc[0],
274 		(volatile struct alt_sgdma_descriptor *)&tx_desc[1],
275 		(unsigned int *)packet,	/* read addr */
276 		(unsigned int *)0,
277 		length,	/* length or EOP ,will change for each tx */
278 		0x1,	/* gen eop */
279 		0x0,	/* read fixed */
280 		0x1,	/* write fixed or sop */
281 		0x0,	/* read burst */
282 		0x0,	/* write burst */
283 		0x0	/* channel */
284 		);
285 	debug("TX Packet @ 0x%x,0x%x bytes", (unsigned int)packet, length);
286 
287 	/* send the packet */
288 	debug("sending packet\n");
289 	alt_sgdma_do_sync_transfer(tx_sgdma, tx_desc_cur);
290 	debug("sent %d bytes\n", tx_desc_cur->actual_bytes_transferred);
291 	return tx_desc_cur->actual_bytes_transferred;
292 }
293 
294 static int tse_eth_rx(struct eth_device *dev)
295 {
296 	int packet_length = 0;
297 	struct altera_tse_priv *priv = dev->priv;
298 	volatile struct alt_sgdma_descriptor *rx_desc =
299 	    (volatile struct alt_sgdma_descriptor *)priv->rx_desc;
300 	volatile struct alt_sgdma_descriptor *rx_desc_cur = &rx_desc[0];
301 
302 	if (rx_desc_cur->descriptor_status &
303 	    ALT_SGDMA_DESCRIPTOR_STATUS_TERMINATED_BY_EOP_MSK) {
304 		debug("got packet\n");
305 		packet_length = rx_desc->actual_bytes_transferred;
306 		NetReceive(NetRxPackets[0], packet_length);
307 
308 		/* start descriptor again */
309 		flush_dcache((unsigned long)(NetRxPackets[0]), PKTSIZE_ALIGN);
310 		alt_sgdma_construct_descriptor_burst(
311 			(volatile struct alt_sgdma_descriptor *)&rx_desc[0],
312 			(volatile struct alt_sgdma_descriptor *)&rx_desc[1],
313 			(unsigned int)0x0,	/* read addr */
314 			(unsigned int *)NetRxPackets[0],
315 			0x0,	/* length or EOP */
316 			0x0,	/* gen eop */
317 			0x0,	/* read fixed */
318 			0x0,	/* write fixed or sop */
319 			0x0,	/* read burst */
320 			0x0,	/* write burst */
321 			0x0	/* channel */
322 		    );
323 
324 		/* setup the sgdma */
325 		alt_sgdma_do_async_transfer(priv->sgdma_rx, &rx_desc[0]);
326 	}
327 
328 	return -1;
329 }
330 
331 static void tse_eth_halt(struct eth_device *dev)
332 {
333 	/* don't do anything! */
334 	/* this gets called after each uboot  */
335 	/* network command.  don't need to reset the thing all of the time */
336 }
337 
338 static void tse_eth_reset(struct eth_device *dev)
339 {
340 	/* stop sgdmas, disable tse receive */
341 	struct altera_tse_priv *priv = dev->priv;
342 	volatile struct alt_tse_mac *mac_dev = priv->mac_dev;
343 	volatile struct alt_sgdma_registers *rx_sgdma = priv->sgdma_rx;
344 	volatile struct alt_sgdma_registers *tx_sgdma = priv->sgdma_tx;
345 	int counter;
346 	volatile struct alt_sgdma_descriptor *rx_desc =
347 	    (volatile struct alt_sgdma_descriptor *)&priv->rx_desc[0];
348 
349 	/* clear rx desc & wait for sgdma to complete */
350 	rx_desc->descriptor_control = 0;
351 	rx_sgdma->control = 0;
352 	counter = 0;
353 	while (rx_sgdma->status & ALT_SGDMA_STATUS_BUSY_MSK) {
354 		if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
355 			break;
356 	}
357 
358 	if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) {
359 		debug("Timeout waiting for rx sgdma!\n");
360 		rx_sgdma->control = ALT_SGDMA_CONTROL_SOFTWARERESET_MSK;
361 		rx_sgdma->control = ALT_SGDMA_CONTROL_SOFTWARERESET_MSK;
362 	}
363 
364 	counter = 0;
365 	tx_sgdma->control = 0;
366 	while (tx_sgdma->status & ALT_SGDMA_STATUS_BUSY_MSK) {
367 		if (counter++ > ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR)
368 			break;
369 	}
370 
371 	if (counter >= ALT_TSE_SGDMA_BUSY_WATCHDOG_CNTR) {
372 		debug("Timeout waiting for tx sgdma!\n");
373 		tx_sgdma->control = ALT_SGDMA_CONTROL_SOFTWARERESET_MSK;
374 		tx_sgdma->control = ALT_SGDMA_CONTROL_SOFTWARERESET_MSK;
375 	}
376 	/* reset the mac */
377 	mac_dev->command_config.bits.transmit_enable = 1;
378 	mac_dev->command_config.bits.receive_enable = 1;
379 	mac_dev->command_config.bits.software_reset = 1;
380 
381 	counter = 0;
382 	while (mac_dev->command_config.bits.software_reset) {
383 		if (counter++ > ALT_TSE_SW_RESET_WATCHDOG_CNTR)
384 			break;
385 	}
386 
387 	if (counter >= ALT_TSE_SW_RESET_WATCHDOG_CNTR)
388 		debug("TSEMAC SW reset bit never cleared!\n");
389 }
390 
391 static int tse_mdio_read(struct altera_tse_priv *priv, unsigned int regnum)
392 {
393 	volatile struct alt_tse_mac *mac_dev;
394 	unsigned int *mdio_regs;
395 	unsigned int data;
396 	u16 value;
397 
398 	mac_dev = priv->mac_dev;
399 
400 	/* set mdio address */
401 	mac_dev->mdio_phy1_addr = priv->phyaddr;
402 	mdio_regs = (unsigned int *)&mac_dev->mdio_phy1;
403 
404 	/* get the data */
405 	data = mdio_regs[regnum];
406 
407 	value = data & 0xffff;
408 
409 	return value;
410 }
411 
412 static int tse_mdio_write(struct altera_tse_priv *priv, unsigned int regnum,
413 		   unsigned int value)
414 {
415 	volatile struct alt_tse_mac *mac_dev;
416 	unsigned int *mdio_regs;
417 	unsigned int data;
418 
419 	mac_dev = priv->mac_dev;
420 
421 	/* set mdio address */
422 	mac_dev->mdio_phy1_addr = priv->phyaddr;
423 	mdio_regs = (unsigned int *)&mac_dev->mdio_phy1;
424 
425 	/* get the data */
426 	data = (unsigned int)value;
427 
428 	mdio_regs[regnum] = data;
429 
430 	return 0;
431 }
432 
433 /* MDIO access to phy */
434 #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII)
435 static int altera_tse_miiphy_write(const char *devname, unsigned char addr,
436 				   unsigned char reg, unsigned short value)
437 {
438 	struct eth_device *dev;
439 	struct altera_tse_priv *priv;
440 	dev = eth_get_dev_by_name(devname);
441 	priv = dev->priv;
442 
443 	tse_mdio_write(priv, (uint) reg, (uint) value);
444 
445 	return 0;
446 }
447 
448 static int altera_tse_miiphy_read(const char *devname, unsigned char addr,
449 				  unsigned char reg, unsigned short *value)
450 {
451 	struct eth_device *dev;
452 	struct altera_tse_priv *priv;
453 	volatile struct alt_tse_mac *mac_dev;
454 	unsigned int *mdio_regs;
455 
456 	dev = eth_get_dev_by_name(devname);
457 	priv = dev->priv;
458 
459 	mac_dev = priv->mac_dev;
460 	mac_dev->mdio_phy1_addr = (int)addr;
461 	mdio_regs = (unsigned int *)&mac_dev->mdio_phy1;
462 
463 	*value = 0xffff & mdio_regs[reg];
464 
465 	return 0;
466 
467 }
468 #endif
469 
470 /*
471  * Also copied from tsec.c
472  */
473 /* Parse the status register for link, and then do
474  * auto-negotiation
475  */
476 static uint mii_parse_sr(uint mii_reg, struct altera_tse_priv *priv)
477 {
478 	/*
479 	 * Wait if the link is up, and autonegotiation is in progress
480 	 * (ie - we're capable and it's not done)
481 	 */
482 	mii_reg = tse_mdio_read(priv, MIIM_STATUS);
483 
484 	if (!(mii_reg & MIIM_STATUS_LINK) && (mii_reg & BMSR_ANEGCAPABLE)
485 	    && !(mii_reg & BMSR_ANEGCOMPLETE)) {
486 		int i = 0;
487 
488 		puts("Waiting for PHY auto negotiation to complete");
489 		while (!(mii_reg & BMSR_ANEGCOMPLETE)) {
490 			/*
491 			 * Timeout reached ?
492 			 */
493 			if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
494 				puts(" TIMEOUT !\n");
495 				priv->link = 0;
496 				return 0;
497 			}
498 
499 			if ((i++ % 1000) == 0)
500 				putc('.');
501 			udelay(1000);	/* 1 ms */
502 			mii_reg = tse_mdio_read(priv, MIIM_STATUS);
503 		}
504 		puts(" done\n");
505 		priv->link = 1;
506 		udelay(500000);	/* another 500 ms (results in faster booting) */
507 	} else {
508 		if (mii_reg & MIIM_STATUS_LINK) {
509 			debug("Link is up\n");
510 			priv->link = 1;
511 		} else {
512 			debug("Link is down\n");
513 			priv->link = 0;
514 		}
515 	}
516 
517 	return 0;
518 }
519 
520 /* Parse the 88E1011's status register for speed and duplex
521  * information
522  */
523 static uint mii_parse_88E1011_psr(uint mii_reg, struct altera_tse_priv *priv)
524 {
525 	uint speed;
526 
527 	mii_reg = tse_mdio_read(priv, MIIM_88E1011_PHY_STATUS);
528 
529 	if ((mii_reg & MIIM_88E1011_PHYSTAT_LINK) &&
530 	    !(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) {
531 		int i = 0;
532 
533 		puts("Waiting for PHY realtime link");
534 		while (!(mii_reg & MIIM_88E1011_PHYSTAT_SPDDONE)) {
535 			/* Timeout reached ? */
536 			if (i > PHY_AUTONEGOTIATE_TIMEOUT) {
537 				puts(" TIMEOUT !\n");
538 				priv->link = 0;
539 				break;
540 			}
541 
542 			if ((i++ == 1000) == 0) {
543 				i = 0;
544 				puts(".");
545 			}
546 			udelay(1000);	/* 1 ms */
547 			mii_reg = tse_mdio_read(priv, MIIM_88E1011_PHY_STATUS);
548 		}
549 		puts(" done\n");
550 		udelay(500000);	/* another 500 ms (results in faster booting) */
551 	} else {
552 		if (mii_reg & MIIM_88E1011_PHYSTAT_LINK)
553 			priv->link = 1;
554 		else
555 			priv->link = 0;
556 	}
557 
558 	if (mii_reg & MIIM_88E1011_PHYSTAT_DUPLEX)
559 		priv->duplexity = 1;
560 	else
561 		priv->duplexity = 0;
562 
563 	speed = (mii_reg & MIIM_88E1011_PHYSTAT_SPEED);
564 
565 	switch (speed) {
566 	case MIIM_88E1011_PHYSTAT_GBIT:
567 		priv->speed = 1000;
568 		debug("PHY Speed is 1000Mbit\n");
569 		break;
570 	case MIIM_88E1011_PHYSTAT_100:
571 		debug("PHY Speed is 100Mbit\n");
572 		priv->speed = 100;
573 		break;
574 	default:
575 		debug("PHY Speed is 10Mbit\n");
576 		priv->speed = 10;
577 	}
578 
579 	return 0;
580 }
581 
582 static uint mii_m88e1111s_setmode_sr(uint mii_reg, struct altera_tse_priv *priv)
583 {
584 	uint mii_data = tse_mdio_read(priv, mii_reg);
585 	mii_data &= 0xfff0;
586 	if ((priv->flags >= 1) && (priv->flags <= 4))
587 		mii_data |= 0xb;
588 	else if (priv->flags == 5)
589 		mii_data |= 0x4;
590 
591 	return mii_data;
592 }
593 
594 static uint mii_m88e1111s_setmode_cr(uint mii_reg, struct altera_tse_priv *priv)
595 {
596 	uint mii_data = tse_mdio_read(priv, mii_reg);
597 	mii_data &= ~0x82;
598 	if ((priv->flags >= 1) && (priv->flags <= 4))
599 		mii_data |= 0x82;
600 
601 	return mii_data;
602 }
603 
604 /*
605  * Returns which value to write to the control register.
606  * For 10/100, the value is slightly different
607  */
608 static uint mii_cr_init(uint mii_reg, struct altera_tse_priv *priv)
609 {
610 	return MIIM_CONTROL_INIT;
611 }
612 
613 /*
614  * PHY & MDIO code
615  * Need to add SGMII stuff
616  *
617  */
618 
619 static struct phy_info phy_info_M88E1111S = {
620 	0x01410cc,
621 	"Marvell 88E1111S",
622 	4,
623 	(struct phy_cmd[]){	/* config */
624 			   /* Reset and configure the PHY */
625 			   {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
626 			   {MIIM_88E1111_PHY_EXT_SR, 0x848f,
627 			    &mii_m88e1111s_setmode_sr},
628 			   /* Delay RGMII TX and RX */
629 			   {MIIM_88E1111_PHY_EXT_CR, 0x0cd2,
630 			    &mii_m88e1111s_setmode_cr},
631 			   {MIIM_GBIT_CONTROL, MIIM_GBIT_CONTROL_INIT, NULL},
632 			   {MIIM_ANAR, MIIM_ANAR_INIT, NULL},
633 			   {MIIM_CONTROL, MIIM_CONTROL_RESET, NULL},
634 			   {MIIM_CONTROL, MIIM_CONTROL_INIT, &mii_cr_init},
635 			   {miim_end,}
636 			   },
637 	(struct phy_cmd[]){	/* startup */
638 			   /* Status is read once to clear old link state */
639 			   {MIIM_STATUS, miim_read, NULL},
640 			   /* Auto-negotiate */
641 			   {MIIM_STATUS, miim_read, &mii_parse_sr},
642 			   /* Read the status */
643 			   {MIIM_88E1011_PHY_STATUS, miim_read,
644 			    &mii_parse_88E1011_psr},
645 			   {miim_end,}
646 			   },
647 	(struct phy_cmd[]){	/* shutdown */
648 			   {miim_end,}
649 			   },
650 };
651 
652 /* a generic flavor.  */
653 static struct phy_info phy_info_generic = {
654 	0,
655 	"Unknown/Generic PHY",
656 	32,
657 	(struct phy_cmd[]){	/* config */
658 			   {MII_BMCR, BMCR_RESET, NULL},
659 			   {MII_BMCR, BMCR_ANENABLE | BMCR_ANRESTART, NULL},
660 			   {miim_end,}
661 			   },
662 	(struct phy_cmd[]){	/* startup */
663 			   {MII_BMSR, miim_read, NULL},
664 			   {MII_BMSR, miim_read, &mii_parse_sr},
665 			   {miim_end,}
666 			   },
667 	(struct phy_cmd[]){	/* shutdown */
668 			   {miim_end,}
669 			   }
670 };
671 
672 static struct phy_info *phy_info[] = {
673 	&phy_info_M88E1111S,
674 	NULL
675 };
676 
677  /* Grab the identifier of the device's PHY, and search through
678   * all of the known PHYs to see if one matches.	 If so, return
679   * it, if not, return NULL
680   */
681 static struct phy_info *get_phy_info(struct eth_device *dev)
682 {
683 	struct altera_tse_priv *priv = (struct altera_tse_priv *)dev->priv;
684 	uint phy_reg, phy_ID;
685 	int i;
686 	struct phy_info *theInfo = NULL;
687 
688 	/* Grab the bits from PHYIR1, and put them in the upper half */
689 	phy_reg = tse_mdio_read(priv, MIIM_PHYIR1);
690 	phy_ID = (phy_reg & 0xffff) << 16;
691 
692 	/* Grab the bits from PHYIR2, and put them in the lower half */
693 	phy_reg = tse_mdio_read(priv, MIIM_PHYIR2);
694 	phy_ID |= (phy_reg & 0xffff);
695 
696 	/* loop through all the known PHY types, and find one that */
697 	/* matches the ID we read from the PHY. */
698 	for (i = 0; phy_info[i]; i++) {
699 		if (phy_info[i]->id == (phy_ID >> phy_info[i]->shift)) {
700 			theInfo = phy_info[i];
701 			break;
702 		}
703 	}
704 
705 	if (theInfo == NULL) {
706 		theInfo = &phy_info_generic;
707 		debug("%s: No support for PHY id %x; assuming generic\n",
708 		      dev->name, phy_ID);
709 	} else
710 		debug("%s: PHY is %s (%x)\n", dev->name, theInfo->name, phy_ID);
711 
712 	return theInfo;
713 }
714 
715 /* Execute the given series of commands on the given device's
716  * PHY, running functions as necessary
717  */
718 static void phy_run_commands(struct altera_tse_priv *priv, struct phy_cmd *cmd)
719 {
720 	int i;
721 	uint result;
722 
723 	for (i = 0; cmd->mii_reg != miim_end; i++) {
724 		if (cmd->mii_data == miim_read) {
725 			result = tse_mdio_read(priv, cmd->mii_reg);
726 
727 			if (cmd->funct != NULL)
728 				(*(cmd->funct)) (result, priv);
729 
730 		} else {
731 			if (cmd->funct != NULL)
732 				result = (*(cmd->funct)) (cmd->mii_reg, priv);
733 			else
734 				result = cmd->mii_data;
735 
736 			tse_mdio_write(priv, cmd->mii_reg, result);
737 
738 		}
739 		cmd++;
740 	}
741 }
742 
743 /* Phy init code */
744 static int init_phy(struct eth_device *dev)
745 {
746 	struct altera_tse_priv *priv = (struct altera_tse_priv *)dev->priv;
747 	struct phy_info *curphy;
748 
749 	/* Get the cmd structure corresponding to the attached
750 	 * PHY */
751 	curphy = get_phy_info(dev);
752 
753 	if (curphy == NULL) {
754 		priv->phyinfo = NULL;
755 		debug("%s: No PHY found\n", dev->name);
756 
757 		return 0;
758 	} else
759 		debug("%s found\n", curphy->name);
760 	priv->phyinfo = curphy;
761 
762 	phy_run_commands(priv, priv->phyinfo->config);
763 
764 	return 1;
765 }
766 
767 static int tse_set_mac_address(struct eth_device *dev)
768 {
769 	struct altera_tse_priv *priv = dev->priv;
770 	volatile struct alt_tse_mac *mac_dev = priv->mac_dev;
771 
772 	debug("Setting MAC address to 0x%02x%02x%02x%02x%02x%02x\n",
773 	      dev->enetaddr[5], dev->enetaddr[4],
774 	      dev->enetaddr[3], dev->enetaddr[2],
775 	      dev->enetaddr[1], dev->enetaddr[0]);
776 	mac_dev->mac_addr_0 = ((dev->enetaddr[3]) << 24 |
777 			       (dev->enetaddr[2]) << 16 |
778 			       (dev->enetaddr[1]) << 8 | (dev->enetaddr[0]));
779 
780 	mac_dev->mac_addr_1 = ((dev->enetaddr[5] << 8 |
781 				(dev->enetaddr[4])) & 0xFFFF);
782 
783 	/* Set the MAC address */
784 	mac_dev->supp_mac_addr_0_0 = mac_dev->mac_addr_0;
785 	mac_dev->supp_mac_addr_0_1 = mac_dev->mac_addr_1;
786 
787 	/* Set the MAC address */
788 	mac_dev->supp_mac_addr_1_0 = mac_dev->mac_addr_0;
789 	mac_dev->supp_mac_addr_1_1 = mac_dev->mac_addr_1;
790 
791 	/* Set the MAC address */
792 	mac_dev->supp_mac_addr_2_0 = mac_dev->mac_addr_0;
793 	mac_dev->supp_mac_addr_2_1 = mac_dev->mac_addr_1;
794 
795 	/* Set the MAC address */
796 	mac_dev->supp_mac_addr_3_0 = mac_dev->mac_addr_0;
797 	mac_dev->supp_mac_addr_3_1 = mac_dev->mac_addr_1;
798 	return 0;
799 }
800 
801 static int tse_eth_init(struct eth_device *dev, bd_t * bd)
802 {
803 	int dat;
804 	struct altera_tse_priv *priv = dev->priv;
805 	volatile struct alt_tse_mac *mac_dev = priv->mac_dev;
806 	volatile struct alt_sgdma_descriptor *tx_desc = priv->tx_desc;
807 	volatile struct alt_sgdma_descriptor *rx_desc = priv->rx_desc;
808 	volatile struct alt_sgdma_descriptor *rx_desc_cur =
809 	    (volatile struct alt_sgdma_descriptor *)&rx_desc[0];
810 
811 	/* stop controller */
812 	debug("Reseting TSE & SGDMAs\n");
813 	tse_eth_reset(dev);
814 
815 	/* start the phy */
816 	debug("Configuring PHY\n");
817 	phy_run_commands(priv, priv->phyinfo->startup);
818 
819 	/* need to create sgdma */
820 	debug("Configuring tx desc\n");
821 	alt_sgdma_construct_descriptor_burst(
822 		(volatile struct alt_sgdma_descriptor *)&tx_desc[0],
823 		(volatile struct alt_sgdma_descriptor *)&tx_desc[1],
824 		(unsigned int *)NULL,	/* read addr */
825 		(unsigned int *)0,
826 		0,	/* length or EOP ,will change for each tx */
827 		0x1,	/* gen eop */
828 		0x0,	/* read fixed */
829 		0x1,	/* write fixed or sop */
830 		0x0,	/* read burst */
831 		0x0,	/* write burst */
832 		0x0	/* channel */
833 		);
834 	debug("Configuring rx desc\n");
835 	flush_dcache((unsigned long)(NetRxPackets[0]), PKTSIZE_ALIGN);
836 	alt_sgdma_construct_descriptor_burst(
837 		(volatile struct alt_sgdma_descriptor *)&rx_desc[0],
838 		(volatile struct alt_sgdma_descriptor *)&rx_desc[1],
839 		(unsigned int)0x0,	/* read addr */
840 		(unsigned int *)NetRxPackets[0],
841 		0x0,	/* length or EOP */
842 		0x0,	/* gen eop */
843 		0x0,	/* read fixed */
844 		0x0,	/* write fixed or sop */
845 		0x0,	/* read burst */
846 		0x0,	/* write burst */
847 		0x0	/* channel */
848 		);
849 	/* start rx async transfer */
850 	debug("Starting rx sgdma\n");
851 	alt_sgdma_do_async_transfer(priv->sgdma_rx, rx_desc_cur);
852 
853 	/* start TSE */
854 	debug("Configuring TSE Mac\n");
855 	/* Initialize MAC registers */
856 	mac_dev->max_frame_length = PKTSIZE_ALIGN;
857 	mac_dev->rx_almost_empty_threshold = 8;
858 	mac_dev->rx_almost_full_threshold = 8;
859 	mac_dev->tx_almost_empty_threshold = 8;
860 	mac_dev->tx_almost_full_threshold = 3;
861 	mac_dev->tx_sel_empty_threshold =
862 	    CONFIG_SYS_ALTERA_TSE_TX_FIFO - 16;
863 	mac_dev->tx_sel_full_threshold = 0;
864 	mac_dev->rx_sel_empty_threshold =
865 	    CONFIG_SYS_ALTERA_TSE_TX_FIFO - 16;
866 	mac_dev->rx_sel_full_threshold = 0;
867 
868 	/* NO Shift */
869 	mac_dev->rx_cmd_stat.bits.rx_shift16 = 0;
870 	mac_dev->tx_cmd_stat.bits.tx_shift16 = 0;
871 
872 	/* enable MAC */
873 	dat = 0;
874 	dat = ALTERA_TSE_CMD_TX_ENA_MSK | ALTERA_TSE_CMD_RX_ENA_MSK;
875 
876 	mac_dev->command_config.image = dat;
877 
878 	/* configure the TSE core  */
879 	/*  -- output clocks,  */
880 	/*  -- and later config stuff for SGMII */
881 	if (priv->link) {
882 		debug("Adjusting TSE to link speed\n");
883 		tse_adjust_link(priv);
884 	}
885 
886 	return priv->link ? 0 : -1;
887 }
888 
889 /* TSE init code */
890 int altera_tse_initialize(u8 dev_num, int mac_base,
891 			  int sgdma_rx_base, int sgdma_tx_base,
892 			  u32 sgdma_desc_base, u32 sgdma_desc_size)
893 {
894 	struct altera_tse_priv *priv;
895 	struct eth_device *dev;
896 	struct alt_sgdma_descriptor *rx_desc;
897 	struct alt_sgdma_descriptor *tx_desc;
898 	unsigned long dma_handle;
899 
900 	dev = (struct eth_device *)malloc(sizeof *dev);
901 
902 	if (NULL == dev)
903 		return 0;
904 
905 	memset(dev, 0, sizeof *dev);
906 
907 	priv = malloc(sizeof(*priv));
908 
909 	if (!priv) {
910 		free(dev);
911 		return 0;
912 	}
913 	if (sgdma_desc_size) {
914 		if (sgdma_desc_size < (sizeof(*tx_desc) * (3 + PKTBUFSRX))) {
915 			printf("ALTERA_TSE-%hu: "
916 			       "descriptor memory is too small\n", dev_num);
917 			free(priv);
918 			free(dev);
919 			return 0;
920 		}
921 		tx_desc = (struct alt_sgdma_descriptor *)sgdma_desc_base;
922 	} else {
923 		tx_desc = dma_alloc_coherent(sizeof(*tx_desc) * (3 + PKTBUFSRX),
924 					     &dma_handle);
925 	}
926 
927 	rx_desc = tx_desc + 2;
928 	debug("tx desc: address = 0x%x\n", (unsigned int)tx_desc);
929 	debug("rx desc: address = 0x%x\n", (unsigned int)rx_desc);
930 
931 	if (!tx_desc) {
932 		free(priv);
933 		free(dev);
934 		return 0;
935 	}
936 	memset(rx_desc, 0, (sizeof *rx_desc) * (PKTBUFSRX + 1));
937 	memset(tx_desc, 0, (sizeof *tx_desc) * 2);
938 
939 	/* initialize tse priv */
940 	priv->mac_dev = (volatile struct alt_tse_mac *)mac_base;
941 	priv->sgdma_rx = (volatile struct alt_sgdma_registers *)sgdma_rx_base;
942 	priv->sgdma_tx = (volatile struct alt_sgdma_registers *)sgdma_tx_base;
943 	priv->phyaddr = CONFIG_SYS_ALTERA_TSE_PHY_ADDR;
944 	priv->flags = CONFIG_SYS_ALTERA_TSE_FLAGS;
945 	priv->rx_desc = rx_desc;
946 	priv->tx_desc = tx_desc;
947 
948 	/* init eth structure */
949 	dev->priv = priv;
950 	dev->init = tse_eth_init;
951 	dev->halt = tse_eth_halt;
952 	dev->send = tse_eth_send;
953 	dev->recv = tse_eth_rx;
954 	dev->write_hwaddr = tse_set_mac_address;
955 	sprintf(dev->name, "%s-%hu", "ALTERA_TSE", dev_num);
956 
957 	eth_register(dev);
958 
959 #if defined(CONFIG_MII) || defined(CONFIG_CMD_MII) && !defined(BITBANGMII)
960 	miiphy_register(dev->name, altera_tse_miiphy_read,
961 			altera_tse_miiphy_write);
962 #endif
963 
964 	init_phy(dev);
965 
966 	return 1;
967 }
968