1config DM_ETH 2 bool "Enable Driver Model for Ethernet drivers" 3 depends on DM 4 help 5 Enable driver model for Ethernet. 6 7 The eth_*() interface will be implemented by the UC_ETH class 8 This is currently implemented in net/eth.c 9 Look in include/net.h for details. 10 11config PHYLIB 12 bool "Ethernet PHY (physical media interface) support" 13 help 14 Enable Ethernet PHY (physical media interface) support. 15 16config RTL8211X_PHY_FORCE_MASTER 17 bool "Ethernet PHY RTL8211x: force 1000BASE-T master mode" 18 depends on PHYLIB 19 help 20 Force master mode for 1000BASE-T on RTl8211x PHYs (except for RTL8211F). 21 This can work around link stability and data corruption issues on gigabit 22 links which can occur in slave mode on certain PHYs, e.g. on the 23 RTL8211C(L). 24 25 Please note that two directly connected devices (i.e. via crossover cable) 26 will not be able to establish a link between each other if they both force 27 master mode. Multiple devices forcing master mode when connected by a 28 network switch do not pose a problem as the switch configures its affected 29 ports into slave mode. 30 31 This option only affects gigabit links. If you must establish a direct 32 connection between two devices which both force master mode, try forcing 33 the link speed to 100MBit/s. 34 35 If unsure, say N. 36 37menuconfig NETDEVICES 38 bool "Network device support" 39 depends on NET 40 default y if DM_ETH 41 help 42 You must select Y to enable any network device support 43 Generally if you have any networking support this is a given 44 45 If unsure, say Y 46 47if NETDEVICES 48 49config AG7XXX 50 bool "Atheros AG7xxx Ethernet MAC support" 51 depends on DM_ETH && ARCH_ATH79 52 select PHYLIB 53 help 54 This driver supports the Atheros AG7xxx Ethernet MAC. This MAC is 55 present in the Atheros AR7xxx, AR9xxx and QCA9xxx MIPS chips. 56 57 58config ALTERA_TSE 59 bool "Altera Triple-Speed Ethernet MAC support" 60 depends on DM_ETH 61 select PHYLIB 62 help 63 This driver supports the Altera Triple-Speed (TSE) Ethernet MAC. 64 Please find details on the "Triple-Speed Ethernet MegaCore Function 65 Resource Center" of Altera. 66 67config DWC_ETH_QOS 68 bool "Synopsys DWC Ethernet QOS device support" 69 depends on DM_ETH 70 select PHYLIB 71 help 72 This driver supports the Synopsys Designware Ethernet QOS (Quality 73 Of Service) IP block. The IP supports many options for bus type, 74 clocking/reset structure, and feature list. This driver currently 75 supports the specific configuration used in NVIDIA's Tegra186 chip, 76 but should be extensible to other combinations quite easily. 77 78config E1000 79 bool "Intel PRO/1000 Gigabit Ethernet support" 80 help 81 This driver supports Intel(R) PRO/1000 gigabit ethernet family of 82 adapters. For more information on how to identify your adapter, go 83 to the Adapter & Driver ID Guide at: 84 85 <http://support.intel.com/support/network/adapter/pro100/21397.htm> 86 87config E1000_SPI_GENERIC 88 bool "Allow access to the Intel 8257x SPI bus" 89 depends on E1000 90 help 91 Allow generic access to the SPI bus on the Intel 8257x, for 92 example with the "sspi" command. 93 94config E1000_SPI 95 bool "Enable SPI bus utility code" 96 depends on E1000 97 help 98 Utility code for direct access to the SPI bus on Intel 8257x. 99 This does not do anything useful unless you set at least one 100 of CONFIG_CMD_E1000 or CONFIG_E1000_SPI_GENERIC. 101 102config CMD_E1000 103 bool "Enable the e1000 command" 104 depends on E1000 105 help 106 This enables the 'e1000' management command for E1000 devices. When 107 used on devices with SPI support you can reprogram the EEPROM from 108 U-Boot. 109 110config ETH_SANDBOX 111 depends on DM_ETH && SANDBOX 112 default y 113 bool "Sandbox: Mocked Ethernet driver" 114 help 115 This driver simply responds with fake ARP replies and ping 116 replies that are used to verify network stack functionality 117 118 This driver is particularly useful in the test/dm/eth.c tests 119 120config ETH_SANDBOX_RAW 121 depends on DM_ETH && SANDBOX 122 default y 123 bool "Sandbox: Bridge to Linux Raw Sockets" 124 help 125 This driver is a bridge from the bottom of the network stack 126 in U-Boot to the RAW AF_PACKET API in Linux. This allows real 127 network traffic to be tested from within sandbox. See 128 board/sandbox/README.sandbox for more details. 129 130config ETH_DESIGNWARE 131 bool "Synopsys Designware Ethernet MAC" 132 select PHYLIB 133 help 134 This MAC is present in SoCs from various vendors. It supports 135 100Mbit and 1 Gbit operation. You must enable CONFIG_PHYLIB to 136 provide the PHY (physical media interface). 137 138config ETHOC 139 bool "OpenCores 10/100 Mbps Ethernet MAC" 140 help 141 This MAC is present in OpenRISC and Xtensa XTFPGA boards. 142 143config FEC_MXC 144 bool "FEC Ethernet controller" 145 depends on MX5 || MX6 146 help 147 This driver supports the 10/100 Fast Ethernet controller for 148 NXP i.MX processors. 149 150config MVPP2 151 bool "Marvell Armada 375 network interface support" 152 depends on ARMADA_375 153 select PHYLIB 154 help 155 This driver supports the network interface units in the 156 Marvell ARMADA 375 SoC. 157 158config MACB 159 bool "Cadence MACB/GEM Ethernet Interface" 160 depends on DM_ETH 161 select PHYLIB 162 help 163 The Cadence MACB ethernet interface is found on many Atmel 164 AT91 and SAMA5 parts. This driver also supports the Cadence 165 GEM (Gigabit Ethernet MAC) found in some ARM SoC devices. 166 Say Y to include support for the MACB/GEM chip. 167 168config PCH_GBE 169 bool "Intel Platform Controller Hub EG20T GMAC driver" 170 depends on DM_ETH && DM_PCI 171 select PHYLIB 172 help 173 This MAC is present in Intel Platform Controller Hub EG20T. It 174 supports 10/100/1000 Mbps operation. 175 176config RTL8139 177 bool "Realtek 8139 series Ethernet controller driver" 178 help 179 This driver supports Realtek 8139 series fast ethernet family of 180 PCI chipsets/adapters. 181 182config RTL8169 183 bool "Realtek 8169 series Ethernet controller driver" 184 help 185 This driver supports Realtek 8169 series gigabit ethernet family of 186 PCI/PCIe chipsets/adapters. 187 188config SUN8I_EMAC 189 bool "Allwinner Sun8i Ethernet MAC support" 190 depends on DM_ETH 191 select PHYLIB 192 help 193 This driver supports the Allwinner based SUN8I/SUN50I Ethernet MAC. 194 It can be found in H3/A64/A83T based SoCs and compatible with both 195 External and Internal PHY's. 196 197config XILINX_AXIEMAC 198 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP) 199 select PHYLIB 200 select MII 201 bool "Xilinx AXI Ethernet" 202 help 203 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. 204 205config XILINX_EMACLITE 206 depends on DM_ETH && (MICROBLAZE || ARCH_ZYNQ || ARCH_ZYNQMP || MIPS) 207 select PHYLIB 208 select MII 209 bool "Xilinx Ethernetlite" 210 help 211 This MAC is present in Xilinx Microblaze, Zynq and ZynqMP SoCs. 212 213config ZYNQ_GEM 214 depends on DM_ETH && (ARCH_ZYNQ || ARCH_ZYNQMP) 215 select PHYLIB 216 bool "Xilinx Ethernet GEM" 217 help 218 This MAC is present in Xilinx Zynq and ZynqMP SoCs. 219 220config PIC32_ETH 221 bool "Microchip PIC32 Ethernet Support" 222 depends on DM_ETH && MACH_PIC32 223 select PHYLIB 224 help 225 This driver implements 10/100 Mbps Ethernet and MAC layer for 226 Microchip PIC32 microcontrollers. 227 228config GMAC_ROCKCHIP 229 bool "Rockchip Synopsys Designware Ethernet MAC" 230 depends on DM_ETH && ETH_DESIGNWARE 231 help 232 This driver provides Rockchip SoCs network support based on the 233 Synopsys Designware driver. 234 235endif # NETDEVICES 236