1 /* 2 * (C) Copyright 2004-2010 3 * Texas Instruments, <www.ti.com> 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 */ 23 #ifndef _OMAP24XX_I2C_H_ 24 #define _OMAP24XX_I2C_H_ 25 26 /* I2C masks */ 27 28 /* I2C Interrupt Enable Register (I2C_IE): */ 29 #define I2C_IE_GC_IE (1 << 5) 30 #define I2C_IE_XRDY_IE (1 << 4) /* Transmit data ready interrupt enable */ 31 #define I2C_IE_RRDY_IE (1 << 3) /* Receive data ready interrupt enable */ 32 #define I2C_IE_ARDY_IE (1 << 2) /* Register access ready interrupt enable */ 33 #define I2C_IE_NACK_IE (1 << 1) /* No acknowledgment interrupt enable */ 34 #define I2C_IE_AL_IE (1 << 0) /* Arbitration lost interrupt enable */ 35 36 /* I2C Status Register (I2C_STAT): */ 37 38 #define I2C_STAT_SBD (1 << 15) /* Single byte data */ 39 #define I2C_STAT_BB (1 << 12) /* Bus busy */ 40 #define I2C_STAT_ROVR (1 << 11) /* Receive overrun */ 41 #define I2C_STAT_XUDF (1 << 10) /* Transmit underflow */ 42 #define I2C_STAT_AAS (1 << 9) /* Address as slave */ 43 #define I2C_STAT_GC (1 << 5) 44 #define I2C_STAT_XRDY (1 << 4) /* Transmit data ready */ 45 #define I2C_STAT_RRDY (1 << 3) /* Receive data ready */ 46 #define I2C_STAT_ARDY (1 << 2) /* Register access ready */ 47 #define I2C_STAT_NACK (1 << 1) /* No acknowledgment interrupt enable */ 48 #define I2C_STAT_AL (1 << 0) /* Arbitration lost interrupt enable */ 49 50 /* I2C Interrupt Code Register (I2C_INTCODE): */ 51 52 #define I2C_INTCODE_MASK 7 53 #define I2C_INTCODE_NONE 0 54 #define I2C_INTCODE_AL 1 /* Arbitration lost */ 55 #define I2C_INTCODE_NAK 2 /* No acknowledgement/general call */ 56 #define I2C_INTCODE_ARDY 3 /* Register access ready */ 57 #define I2C_INTCODE_RRDY 4 /* Rcv data ready */ 58 #define I2C_INTCODE_XRDY 5 /* Xmit data ready */ 59 60 /* I2C Buffer Configuration Register (I2C_BUF): */ 61 62 #define I2C_BUF_RDMA_EN (1 << 15) /* Receive DMA channel enable */ 63 #define I2C_BUF_XDMA_EN (1 << 7) /* Transmit DMA channel enable */ 64 65 /* I2C Configuration Register (I2C_CON): */ 66 67 #define I2C_CON_EN (1 << 15) /* I2C module enable */ 68 #define I2C_CON_BE (1 << 14) /* Big endian mode */ 69 #define I2C_CON_STB (1 << 11) /* Start byte mode (master mode only) */ 70 #define I2C_CON_MST (1 << 10) /* Master/slave mode */ 71 #define I2C_CON_TRX (1 << 9) /* Transmitter/receiver mode */ 72 /* (master mode only) */ 73 #define I2C_CON_XA (1 << 8) /* Expand address */ 74 #define I2C_CON_STP (1 << 1) /* Stop condition (master mode only) */ 75 #define I2C_CON_STT (1 << 0) /* Start condition (master mode only) */ 76 77 /* I2C System Test Register (I2C_SYSTEST): */ 78 79 #define I2C_SYSTEST_ST_EN (1 << 15) /* System test enable */ 80 #define I2C_SYSTEST_FREE (1 << 14) /* Free running mode, on brkpoint) */ 81 #define I2C_SYSTEST_TMODE_MASK (3 << 12) /* Test mode select */ 82 #define I2C_SYSTEST_TMODE_SHIFT (12) /* Test mode select */ 83 #define I2C_SYSTEST_SCL_I (1 << 3) /* SCL line sense input value */ 84 #define I2C_SYSTEST_SCL_O (1 << 2) /* SCL line drive output value */ 85 #define I2C_SYSTEST_SDA_I (1 << 1) /* SDA line sense input value */ 86 #define I2C_SYSTEST_SDA_O (1 << 0) /* SDA line drive output value */ 87 88 #define I2C_SCLL_SCLL 0 89 #define I2C_SCLL_SCLL_M 0xFF 90 #define I2C_SCLL_HSSCLL 8 91 #define I2C_SCLH_HSSCLL_M 0xFF 92 #define I2C_SCLH_SCLH 0 93 #define I2C_SCLH_SCLH_M 0xFF 94 #define I2C_SCLH_HSSCLH 8 95 #define I2C_SCLH_HSSCLH_M 0xFF 96 97 #define OMAP_I2C_STANDARD 100000 98 #define OMAP_I2C_FAST_MODE 400000 99 #define OMAP_I2C_HIGH_SPEED 3400000 100 101 #define SYSTEM_CLOCK_12 12000000 102 #define SYSTEM_CLOCK_13 13000000 103 #define SYSTEM_CLOCK_192 19200000 104 #define SYSTEM_CLOCK_96 96000000 105 106 /* Use the reference value of 96MHz if not explicitly set by the board */ 107 #ifndef I2C_IP_CLK 108 #define I2C_IP_CLK SYSTEM_CLOCK_96 109 #endif 110 111 /* 112 * The reference minimum clock for high speed is 19.2MHz. 113 * The linux 2.6.30 kernel uses this value. 114 * The reference minimum clock for fast mode is 9.6MHz 115 * The reference minimum clock for standard mode is 4MHz 116 * In TRM, the value of 12MHz is used. 117 */ 118 #ifndef I2C_INTERNAL_SAMPLING_CLK 119 #define I2C_INTERNAL_SAMPLING_CLK 19200000 120 #endif 121 122 /* 123 * The equation for the low and high time is 124 * tlow = scll + scll_trim = (sampling clock * tlow_duty) / speed 125 * thigh = sclh + sclh_trim = (sampling clock * (1 - tlow_duty)) / speed 126 * 127 * If the duty cycle is 50% 128 * 129 * tlow = scll + scll_trim = sampling clock / (2 * speed) 130 * thigh = sclh + sclh_trim = sampling clock / (2 * speed) 131 * 132 * In TRM 133 * scll_trim = 7 134 * sclh_trim = 5 135 * 136 * The linux 2.6.30 kernel uses 137 * scll_trim = 6 138 * sclh_trim = 6 139 * 140 * These are the trim values for standard and fast speed 141 */ 142 #ifndef I2C_FASTSPEED_SCLL_TRIM 143 #define I2C_FASTSPEED_SCLL_TRIM 6 144 #endif 145 #ifndef I2C_FASTSPEED_SCLH_TRIM 146 #define I2C_FASTSPEED_SCLH_TRIM 6 147 #endif 148 149 /* These are the trim values for high speed */ 150 #ifndef I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM 151 #define I2C_HIGHSPEED_PHASE_ONE_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM 152 #endif 153 #ifndef I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM 154 #define I2C_HIGHSPEED_PHASE_ONE_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM 155 #endif 156 #ifndef I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM 157 #define I2C_HIGHSPEED_PHASE_TWO_SCLL_TRIM I2C_FASTSPEED_SCLL_TRIM 158 #endif 159 #ifndef I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM 160 #define I2C_HIGHSPEED_PHASE_TWO_SCLH_TRIM I2C_FASTSPEED_SCLH_TRIM 161 #endif 162 163 #define I2C_PSC_MAX 0x0f 164 #define I2C_PSC_MIN 0x00 165 166 #endif /* _OMAP24XX_I2C_H_ */ 167