1 /* 2 * (C) Copyright 2000 3 * Paolo Scaffardi, AIRVENT SAM s.p.a - RIMINI(ITALY), arsenio@tin.it 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #include <common.h> 9 #include <console.h> 10 #include <debug_uart.h> 11 #include <dm.h> 12 #include <stdarg.h> 13 #include <iomux.h> 14 #include <malloc.h> 15 #include <mapmem.h> 16 #include <os.h> 17 #include <serial.h> 18 #include <stdio_dev.h> 19 #include <exports.h> 20 #include <environment.h> 21 #include <watchdog.h> 22 #include <vsprintf.h> 23 24 #ifdef CONFIG_PSTORE 25 #include <asm/arch/pstore.h> 26 #endif 27 28 DECLARE_GLOBAL_DATA_PTR; 29 30 static int on_console(const char *name, const char *value, enum env_op op, 31 int flags) 32 { 33 int console = -1; 34 35 /* Check for console redirection */ 36 if (strcmp(name, "stdin") == 0) 37 console = stdin; 38 else if (strcmp(name, "stdout") == 0) 39 console = stdout; 40 else if (strcmp(name, "stderr") == 0) 41 console = stderr; 42 43 /* if not actually setting a console variable, we don't care */ 44 if (console == -1 || (gd->flags & GD_FLG_DEVINIT) == 0) 45 return 0; 46 47 switch (op) { 48 case env_op_create: 49 case env_op_overwrite: 50 51 #if CONFIG_IS_ENABLED(CONSOLE_MUX) 52 if (iomux_doenv(console, value)) 53 return 1; 54 #else 55 /* Try assigning specified device */ 56 if (console_assign(console, value) < 0) 57 return 1; 58 #endif 59 return 0; 60 61 case env_op_delete: 62 if ((flags & H_FORCE) == 0) 63 printf("Can't delete \"%s\"\n", name); 64 return 1; 65 66 default: 67 return 0; 68 } 69 } 70 U_BOOT_ENV_CALLBACK(console, on_console); 71 72 #ifdef CONFIG_SILENT_CONSOLE 73 static int on_silent(const char *name, const char *value, enum env_op op, 74 int flags) 75 { 76 #if !CONFIG_IS_ENABLED(SILENT_CONSOLE_UPDATE_ON_SET) 77 if (flags & H_INTERACTIVE) 78 return 0; 79 #endif 80 #if !CONFIG_IS_ENABLED(SILENT_CONSOLE_UPDATE_ON_RELOC) 81 if ((flags & H_INTERACTIVE) == 0) 82 return 0; 83 #endif 84 85 if (value != NULL) 86 gd->flags |= GD_FLG_SILENT; 87 else 88 gd->flags &= ~GD_FLG_SILENT; 89 90 return 0; 91 } 92 U_BOOT_ENV_CALLBACK(silent, on_silent); 93 #endif 94 95 #if CONFIG_IS_ENABLED(SYS_CONSOLE_IS_IN_ENV) 96 /* 97 * if overwrite_console returns 1, the stdin, stderr and stdout 98 * are switched to the serial port, else the settings in the 99 * environment are used 100 */ 101 #ifdef CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE 102 extern int overwrite_console(void); 103 #define OVERWRITE_CONSOLE overwrite_console() 104 #else 105 #define OVERWRITE_CONSOLE 0 106 #endif /* CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE */ 107 108 #endif /* CONFIG_IS_ENABLED(SYS_CONSOLE_IS_IN_ENV) */ 109 110 static int console_setfile(int file, struct stdio_dev * dev) 111 { 112 int error = 0; 113 114 if (dev == NULL) 115 return -1; 116 117 switch (file) { 118 case stdin: 119 case stdout: 120 case stderr: 121 /* Start new device */ 122 if (dev->start) { 123 error = dev->start(dev); 124 /* If it's not started dont use it */ 125 if (error < 0) 126 break; 127 } 128 129 /* Assign the new device (leaving the existing one started) */ 130 stdio_devices[file] = dev; 131 132 /* 133 * Update monitor functions 134 * (to use the console stuff by other applications) 135 */ 136 switch (file) { 137 case stdin: 138 gd->jt->getc = getc; 139 gd->jt->tstc = tstc; 140 break; 141 case stdout: 142 gd->jt->putc = putc; 143 gd->jt->puts = puts; 144 gd->jt->printf = printf; 145 break; 146 } 147 break; 148 149 default: /* Invalid file ID */ 150 error = -1; 151 } 152 return error; 153 } 154 155 /** 156 * console_dev_is_serial() - Check if a stdio device is a serial device 157 * 158 * @sdev: Device to check 159 * @return true if this device is in the serial uclass (or for pre-driver-model, 160 * whether it is called "serial". 161 */ 162 static bool console_dev_is_serial(struct stdio_dev *sdev) 163 { 164 bool is_serial; 165 166 #ifdef CONFIG_DM_SERIAL 167 if (sdev->flags & DEV_FLAGS_DM) { 168 struct udevice *dev = sdev->priv; 169 170 is_serial = device_get_uclass_id(dev) == UCLASS_SERIAL; 171 } else 172 #endif 173 is_serial = !strcmp(sdev->name, "serial"); 174 175 return is_serial; 176 } 177 178 #if CONFIG_IS_ENABLED(CONSOLE_MUX) 179 /** Console I/O multiplexing *******************************************/ 180 181 static struct stdio_dev *tstcdev; 182 struct stdio_dev **console_devices[MAX_FILES]; 183 int cd_count[MAX_FILES]; 184 185 /* 186 * This depends on tstc() always being called before getc(). 187 * This is guaranteed to be true because this routine is called 188 * only from fgetc() which assures it. 189 * No attempt is made to demultiplex multiple input sources. 190 */ 191 static int console_getc(int file) 192 { 193 unsigned char ret; 194 195 /* This is never called with testcdev == NULL */ 196 ret = tstcdev->getc(tstcdev); 197 tstcdev = NULL; 198 return ret; 199 } 200 201 static int console_tstc(int file) 202 { 203 int i, ret; 204 struct stdio_dev *dev; 205 206 disable_ctrlc(1); 207 for (i = 0; i < cd_count[file]; i++) { 208 dev = console_devices[file][i]; 209 if (dev->tstc != NULL) { 210 ret = dev->tstc(dev); 211 if (ret > 0) { 212 tstcdev = dev; 213 disable_ctrlc(0); 214 return ret; 215 } 216 } 217 } 218 disable_ctrlc(0); 219 220 return 0; 221 } 222 223 static void console_putc(int file, const char c) 224 { 225 int i; 226 struct stdio_dev *dev; 227 228 for (i = 0; i < cd_count[file]; i++) { 229 dev = console_devices[file][i]; 230 if (dev->putc != NULL) 231 dev->putc(dev, c); 232 } 233 } 234 235 static void console_puts_noserial(int file, const char *s) 236 { 237 int i; 238 struct stdio_dev *dev; 239 240 for (i = 0; i < cd_count[file]; i++) { 241 dev = console_devices[file][i]; 242 if (dev->puts != NULL && !console_dev_is_serial(dev)) 243 dev->puts(dev, s); 244 } 245 } 246 247 static void console_puts(int file, const char *s) 248 { 249 int i; 250 struct stdio_dev *dev; 251 252 for (i = 0; i < cd_count[file]; i++) { 253 dev = console_devices[file][i]; 254 if (dev->puts != NULL) 255 dev->puts(dev, s); 256 } 257 } 258 259 static inline void console_doenv(int file, struct stdio_dev *dev) 260 { 261 iomux_doenv(file, dev->name); 262 } 263 264 static void console_clear(int file) 265 { 266 int i; 267 struct stdio_dev *dev; 268 269 for (i = 0; i < cd_count[file]; i++) { 270 dev = console_devices[file][i]; 271 if (dev->clear != NULL) 272 dev->clear(dev); 273 } 274 } 275 #else 276 static inline int console_getc(int file) 277 { 278 return stdio_devices[file]->getc(stdio_devices[file]); 279 } 280 281 static inline int console_tstc(int file) 282 { 283 return stdio_devices[file]->tstc(stdio_devices[file]); 284 } 285 286 static inline void console_putc(int file, const char c) 287 { 288 stdio_devices[file]->putc(stdio_devices[file], c); 289 } 290 291 static inline void console_puts_noserial(int file, const char *s) 292 { 293 if (!console_dev_is_serial(stdio_devices[file])) 294 stdio_devices[file]->puts(stdio_devices[file], s); 295 } 296 297 static inline void console_puts(int file, const char *s) 298 { 299 stdio_devices[file]->puts(stdio_devices[file], s); 300 } 301 302 static inline void console_clear(int file) 303 { 304 if (stdio_devices[file]->clear) 305 stdio_devices[file]->clear(stdio_devices[file]); 306 } 307 308 static inline void console_doenv(int file, struct stdio_dev *dev) 309 { 310 console_setfile(file, dev); 311 } 312 #endif /* CONIFIG_IS_ENABLED(CONSOLE_MUX) */ 313 314 /** U-Boot INITIAL CONSOLE-NOT COMPATIBLE FUNCTIONS *************************/ 315 316 int serial_printf(const char *fmt, ...) 317 { 318 va_list args; 319 uint i; 320 char printbuffer[CONFIG_SYS_PBSIZE]; 321 322 va_start(args, fmt); 323 324 /* For this to work, printbuffer must be larger than 325 * anything we ever want to print. 326 */ 327 i = vscnprintf(printbuffer, sizeof(printbuffer), fmt, args); 328 va_end(args); 329 330 serial_puts(printbuffer); 331 return i; 332 } 333 334 int fgetc(int file) 335 { 336 if (file < MAX_FILES) { 337 #if CONFIG_IS_ENABLED(CONSOLE_MUX) 338 /* 339 * Effectively poll for input wherever it may be available. 340 */ 341 for (;;) { 342 WATCHDOG_RESET(); 343 /* 344 * Upper layer may have already called tstc() so 345 * check for that first. 346 */ 347 if (tstcdev != NULL) 348 return console_getc(file); 349 console_tstc(file); 350 #ifdef CONFIG_WATCHDOG 351 /* 352 * If the watchdog must be rate-limited then it should 353 * already be handled in board-specific code. 354 */ 355 udelay(1); 356 #endif 357 } 358 #else 359 return console_getc(file); 360 #endif 361 } 362 363 return -1; 364 } 365 366 int ftstc(int file) 367 { 368 if (file < MAX_FILES) 369 return console_tstc(file); 370 371 return -1; 372 } 373 374 void fputc(int file, const char c) 375 { 376 if (file < MAX_FILES) 377 console_putc(file, c); 378 } 379 380 void fputs(int file, const char *s) 381 { 382 if (file < MAX_FILES) 383 console_puts(file, s); 384 } 385 386 void fclear(int file) 387 { 388 if (file < MAX_FILES) 389 console_clear(file); 390 } 391 392 int fprintf(int file, const char *fmt, ...) 393 { 394 va_list args; 395 uint i; 396 char printbuffer[CONFIG_SYS_PBSIZE]; 397 398 va_start(args, fmt); 399 400 /* For this to work, printbuffer must be larger than 401 * anything we ever want to print. 402 */ 403 i = vscnprintf(printbuffer, sizeof(printbuffer), fmt, args); 404 va_end(args); 405 406 /* Send to desired file */ 407 fputs(file, printbuffer); 408 return i; 409 } 410 411 /** U-Boot INITIAL CONSOLE-COMPATIBLE FUNCTION *****************************/ 412 413 int getc(void) 414 { 415 if (!gd || gd->flags & GD_FLG_DISABLE_CONSOLE) 416 return 0; 417 418 if (!gd->have_console) 419 return 0; 420 421 #ifdef CONFIG_CONSOLE_RECORD 422 if (gd->console_in.start) { 423 int ch; 424 425 ch = membuff_getbyte((struct membuff *)&gd->console_in); 426 if (ch != -1) 427 return 1; 428 } 429 #endif 430 if (gd->flags & GD_FLG_DEVINIT) { 431 /* Get from the standard input */ 432 return fgetc(stdin); 433 } 434 435 /* Send directly to the handler */ 436 return serial_getc(); 437 } 438 439 int tstc(void) 440 { 441 if (!gd || gd->flags & GD_FLG_DISABLE_CONSOLE) 442 return 0; 443 444 if (!gd->have_console) 445 return 0; 446 #ifdef CONFIG_CONSOLE_RECORD 447 if (gd->console_in.start) { 448 if (membuff_peekbyte((struct membuff *)&gd->console_in) != -1) 449 return 1; 450 } 451 #endif 452 if (gd->flags & GD_FLG_DEVINIT) { 453 /* Test the standard input */ 454 return ftstc(stdin); 455 } 456 457 /* Send directly to the handler */ 458 return serial_tstc(); 459 } 460 461 void flushc(void) 462 { 463 if (!gd || gd->flags & GD_FLG_DISABLE_CONSOLE) 464 return; 465 466 #ifdef CONFIG_DEBUG_UART_NS16550 467 debug_uart_flushc(); 468 #endif 469 } 470 471 #define PRE_CONSOLE_FLUSHPOINT1_SERIAL 0 472 #define PRE_CONSOLE_FLUSHPOINT2_EVERYTHING_BUT_SERIAL 1 473 474 #if CONFIG_IS_ENABLED(PRE_CONSOLE_BUFFER) 475 #define CIRC_BUF_IDX(idx) ((idx) % (unsigned long)CONFIG_PRE_CON_BUF_SZ) 476 477 static void pre_console_putc(const char c) 478 { 479 char *buffer; 480 481 buffer = map_sysmem(CONFIG_PRE_CON_BUF_ADDR, CONFIG_PRE_CON_BUF_SZ); 482 483 buffer[CIRC_BUF_IDX(gd->precon_buf_idx++)] = c; 484 485 unmap_sysmem(buffer); 486 } 487 488 static void print_pre_console_buffer(int flushpoint) 489 { 490 unsigned long in = 0, out = 0; 491 char buf_out[CONFIG_PRE_CON_BUF_SZ + 1]; 492 char *buf_in; 493 494 buf_in = map_sysmem(CONFIG_PRE_CON_BUF_ADDR, CONFIG_PRE_CON_BUF_SZ); 495 if (gd->precon_buf_idx > CONFIG_PRE_CON_BUF_SZ) 496 in = gd->precon_buf_idx - CONFIG_PRE_CON_BUF_SZ; 497 498 while (in < gd->precon_buf_idx) 499 buf_out[out++] = buf_in[CIRC_BUF_IDX(in++)]; 500 unmap_sysmem(buf_in); 501 502 buf_out[out] = 0; 503 504 switch (flushpoint) { 505 case PRE_CONSOLE_FLUSHPOINT1_SERIAL: 506 puts(buf_out); 507 break; 508 case PRE_CONSOLE_FLUSHPOINT2_EVERYTHING_BUT_SERIAL: 509 console_puts_noserial(stdout, buf_out); 510 break; 511 } 512 } 513 #else 514 static inline void pre_console_putc(const char c) {} 515 static inline void print_pre_console_buffer(int flushpoint) {} 516 #endif 517 518 void putc(const char c) 519 { 520 if (!gd || gd->flags & GD_FLG_DISABLE_CONSOLE) 521 return; 522 523 #ifdef CONFIG_PSTORE 524 putc_to_ram(c); 525 #endif 526 527 #ifdef CONFIG_CONSOLE_RECORD 528 if (gd && (gd->flags & GD_FLG_RECORD) && gd->console_out.start) 529 membuff_putbyte((struct membuff *)&gd->console_out, c); 530 #endif 531 #ifdef CONFIG_SILENT_CONSOLE 532 if (gd->flags & GD_FLG_SILENT) 533 return; 534 #endif 535 536 #ifdef CONFIG_DEBUG_UART 537 /* if we don't have a console yet, use the debug UART */ 538 if (!gd || !(gd->flags & GD_FLG_SERIAL_READY)) { 539 printch(c); 540 return; 541 } 542 #endif 543 if (!gd->have_console) 544 return pre_console_putc(c); 545 546 if (gd->flags & GD_FLG_DEVINIT) { 547 /* Send to the standard output */ 548 fputc(stdout, c); 549 } else { 550 /* Send directly to the handler */ 551 pre_console_putc(c); 552 serial_putc(c); 553 } 554 } 555 556 #if ((!defined(CONFIG_SPL_BUILD) || !defined(CONFIG_USE_TINY_PRINTF)) && \ 557 defined(CONFIG_BOOTSTAGE_PRINTF_TIMESTAMP)) 558 static void vspfunc(char *buf, size_t size, char *format, ...) 559 { 560 va_list ap; 561 562 va_start(ap, format); 563 vsnprintf(buf, size, format, ap); 564 va_end(ap); 565 } 566 567 void puts(const char *s) 568 { 569 unsigned long ts_sec, ts_msec, ticks; 570 char pr_timestamp[32], *p; 571 572 while (*s) { 573 if (*s == '\n') { 574 gd->new_line = 1; 575 putc(*s++); 576 continue; 577 } 578 579 if (gd->new_line) { 580 gd->new_line = 0; 581 ticks = (get_ticks() / (gd->arch.timer_rate_hz / 1000000)); 582 ts_sec = ticks / 1000000; 583 ts_msec = ticks % 1000000; 584 vspfunc(pr_timestamp, sizeof(pr_timestamp), 585 "[%5lu.%06lu] ", ts_sec, ts_msec); 586 p = pr_timestamp; 587 while (*p) 588 putc(*p++); 589 } 590 591 putc(*s++); 592 } 593 } 594 #else 595 void puts(const char *s) 596 { 597 while (*s) 598 putc(*s++); 599 } 600 #endif 601 602 603 #ifdef CONFIG_CONSOLE_RECORD 604 int console_record_init(void) 605 { 606 int ret; 607 608 ret = membuff_new((struct membuff *)&gd->console_out, 609 CONFIG_CONSOLE_RECORD_OUT_SIZE); 610 if (ret) 611 return ret; 612 ret = membuff_new((struct membuff *)&gd->console_in, 613 CONFIG_CONSOLE_RECORD_IN_SIZE); 614 615 return ret; 616 } 617 618 void console_record_reset(void) 619 { 620 membuff_purge((struct membuff *)&gd->console_out); 621 membuff_purge((struct membuff *)&gd->console_in); 622 } 623 624 void console_record_reset_enable(void) 625 { 626 console_record_reset(); 627 gd->flags |= GD_FLG_RECORD; 628 } 629 630 /* Print and remove data from buffer */ 631 void console_record_print_purge(void) 632 { 633 unsigned long flags; 634 char c; 635 636 if (!gd || !(gd->flags & GD_FLG_RECORD)) 637 return; 638 639 /* Remove some bits to avoid running unexpected branch in putc() */ 640 flags = gd->flags; 641 gd->flags &= ~(GD_FLG_RECORD | GD_FLG_SILENT | GD_FLG_DISABLE_CONSOLE); 642 643 printf("\n\n## Console Record: \n"); 644 while (!membuff_isempty((struct membuff *)&gd->console_out)) { 645 c = membuff_getbyte((struct membuff *)&gd->console_out); 646 putc(c); 647 } 648 649 gd->flags = flags; 650 } 651 #endif 652 653 /* test if ctrl-c was pressed */ 654 static int ctrlc_disabled = 0; /* see disable_ctrl() */ 655 static int ctrlc_was_pressed = 0; 656 int ctrlc(void) 657 { 658 #ifndef CONFIG_SANDBOX 659 if (!ctrlc_disabled && gd->have_console) { 660 if (tstc()) { 661 switch (getc()) { 662 case 0x03: /* ^C - Control C */ 663 ctrlc_was_pressed = 1; 664 return 1; 665 default: 666 break; 667 } 668 } 669 } 670 #endif 671 672 return 0; 673 } 674 /* Reads user's confirmation. 675 Returns 1 if user's input is "y", "Y", "yes" or "YES" 676 */ 677 int confirm_yesno(void) 678 { 679 int i; 680 char str_input[5]; 681 682 /* Flush input */ 683 while (tstc()) 684 getc(); 685 i = 0; 686 while (i < sizeof(str_input)) { 687 str_input[i] = getc(); 688 putc(str_input[i]); 689 if (str_input[i] == '\r') 690 break; 691 i++; 692 } 693 putc('\n'); 694 if (strncmp(str_input, "y\r", 2) == 0 || 695 strncmp(str_input, "Y\r", 2) == 0 || 696 strncmp(str_input, "yes\r", 4) == 0 || 697 strncmp(str_input, "YES\r", 4) == 0) 698 return 1; 699 return 0; 700 } 701 /* pass 1 to disable ctrlc() checking, 0 to enable. 702 * returns previous state 703 */ 704 int disable_ctrlc(int disable) 705 { 706 int prev = ctrlc_disabled; /* save previous state */ 707 708 ctrlc_disabled = disable; 709 return prev; 710 } 711 712 int had_ctrlc (void) 713 { 714 return ctrlc_was_pressed; 715 } 716 717 void clear_ctrlc(void) 718 { 719 ctrlc_was_pressed = 0; 720 } 721 722 /** U-Boot INIT FUNCTIONS *************************************************/ 723 724 struct stdio_dev *search_device(int flags, const char *name) 725 { 726 struct stdio_dev *dev; 727 728 dev = stdio_get_by_name(name); 729 #ifdef CONFIG_VIDCONSOLE_AS_LCD 730 if (!dev && !strcmp(name, "lcd")) 731 dev = stdio_get_by_name("vidconsole"); 732 #endif 733 734 if (dev && (dev->flags & flags)) 735 return dev; 736 737 return NULL; 738 } 739 740 int console_assign(int file, const char *devname) 741 { 742 int flag; 743 struct stdio_dev *dev; 744 745 /* Check for valid file */ 746 switch (file) { 747 case stdin: 748 flag = DEV_FLAGS_INPUT; 749 break; 750 case stdout: 751 case stderr: 752 flag = DEV_FLAGS_OUTPUT; 753 break; 754 default: 755 return -1; 756 } 757 758 /* Check for valid device name */ 759 760 dev = search_device(flag, devname); 761 762 if (dev) 763 return console_setfile(file, dev); 764 765 return -1; 766 } 767 768 static void console_update_silent(void) 769 { 770 #ifdef CONFIG_SILENT_CONSOLE 771 if (env_get("silent") != NULL) { 772 printf("U-Boot: enable silent console\n"); 773 gd->flags |= GD_FLG_SILENT; 774 } else { 775 gd->flags &= ~GD_FLG_SILENT; 776 } 777 #endif 778 } 779 780 int console_announce_r(void) 781 { 782 #if !CONFIG_IS_ENABLED(PRE_CONSOLE_BUFFER) 783 char buf[DISPLAY_OPTIONS_BANNER_LENGTH]; 784 785 display_options_get_banner(false, buf, sizeof(buf)); 786 787 console_puts_noserial(stdout, buf); 788 #endif 789 790 return 0; 791 } 792 793 /* Called before relocation - use serial functions */ 794 int console_init_f(void) 795 { 796 gd->have_console = 1; 797 798 console_update_silent(); 799 800 print_pre_console_buffer(PRE_CONSOLE_FLUSHPOINT1_SERIAL); 801 802 return 0; 803 } 804 805 void stdio_print_current_devices(void) 806 { 807 /* Print information */ 808 puts("In: "); 809 if (stdio_devices[stdin] == NULL) { 810 puts("No input devices available!\n"); 811 } else { 812 printf ("%s\n", stdio_devices[stdin]->name); 813 } 814 815 puts("Out: "); 816 if (stdio_devices[stdout] == NULL) { 817 puts("No output devices available!\n"); 818 } else { 819 printf ("%s\n", stdio_devices[stdout]->name); 820 } 821 822 puts("Err: "); 823 if (stdio_devices[stderr] == NULL) { 824 puts("No error devices available!\n"); 825 } else { 826 printf ("%s\n", stdio_devices[stderr]->name); 827 } 828 } 829 830 #if CONFIG_IS_ENABLED(SYS_CONSOLE_IS_IN_ENV) 831 /* Called after the relocation - use desired console functions */ 832 int console_init_r(void) 833 { 834 char *stdinname, *stdoutname, *stderrname; 835 struct stdio_dev *inputdev = NULL, *outputdev = NULL, *errdev = NULL; 836 #ifdef CONFIG_SYS_CONSOLE_ENV_OVERWRITE 837 int i; 838 #endif /* CONFIG_SYS_CONSOLE_ENV_OVERWRITE */ 839 #if CONFIG_IS_ENABLED(CONSOLE_MUX) 840 int iomux_err = 0; 841 #endif 842 843 /* set default handlers at first */ 844 gd->jt->getc = serial_getc; 845 gd->jt->tstc = serial_tstc; 846 gd->jt->putc = serial_putc; 847 gd->jt->puts = serial_puts; 848 gd->jt->printf = serial_printf; 849 850 /* stdin stdout and stderr are in environment */ 851 /* scan for it */ 852 stdinname = env_get("stdin"); 853 stdoutname = env_get("stdout"); 854 stderrname = env_get("stderr"); 855 856 if (OVERWRITE_CONSOLE == 0) { /* if not overwritten by config switch */ 857 inputdev = search_device(DEV_FLAGS_INPUT, stdinname); 858 outputdev = search_device(DEV_FLAGS_OUTPUT, stdoutname); 859 errdev = search_device(DEV_FLAGS_OUTPUT, stderrname); 860 #if CONFIG_IS_ENABLED(CONSOLE_MUX) 861 iomux_err = iomux_doenv(stdin, stdinname); 862 iomux_err += iomux_doenv(stdout, stdoutname); 863 iomux_err += iomux_doenv(stderr, stderrname); 864 if (!iomux_err) 865 /* Successful, so skip all the code below. */ 866 goto done; 867 #endif 868 } 869 /* if the devices are overwritten or not found, use default device */ 870 if (inputdev == NULL) { 871 inputdev = search_device(DEV_FLAGS_INPUT, "serial"); 872 } 873 if (outputdev == NULL) { 874 outputdev = search_device(DEV_FLAGS_OUTPUT, "serial"); 875 } 876 if (errdev == NULL) { 877 errdev = search_device(DEV_FLAGS_OUTPUT, "serial"); 878 } 879 /* Initializes output console first */ 880 if (outputdev != NULL) { 881 /* need to set a console if not done above. */ 882 console_doenv(stdout, outputdev); 883 } 884 if (errdev != NULL) { 885 /* need to set a console if not done above. */ 886 console_doenv(stderr, errdev); 887 } 888 if (inputdev != NULL) { 889 /* need to set a console if not done above. */ 890 console_doenv(stdin, inputdev); 891 } 892 893 #if CONFIG_IS_ENABLED(CONSOLE_MUX) 894 done: 895 #endif 896 897 #ifndef CONFIG_SYS_CONSOLE_INFO_QUIET 898 stdio_print_current_devices(); 899 #endif /* CONFIG_SYS_CONSOLE_INFO_QUIET */ 900 #ifdef CONFIG_VIDCONSOLE_AS_LCD 901 if (strstr(stdoutname, "lcd")) 902 printf("Warning: Please change 'lcd' to 'vidconsole' in stdout/stderr environment vars\n"); 903 #endif 904 905 #ifdef CONFIG_SYS_CONSOLE_ENV_OVERWRITE 906 /* set the environment variables (will overwrite previous env settings) */ 907 for (i = 0; i < 3; i++) { 908 env_set(stdio_names[i], stdio_devices[i]->name); 909 } 910 #endif /* CONFIG_SYS_CONSOLE_ENV_OVERWRITE */ 911 912 gd->flags |= GD_FLG_DEVINIT; /* device initialization completed */ 913 914 #if 0 915 /* If nothing usable installed, use only the initial console */ 916 if ((stdio_devices[stdin] == NULL) && (stdio_devices[stdout] == NULL)) 917 return 0; 918 #endif 919 print_pre_console_buffer(PRE_CONSOLE_FLUSHPOINT2_EVERYTHING_BUT_SERIAL); 920 return 0; 921 } 922 923 #else /* !CONFIG_IS_ENABLED(SYS_CONSOLE_IS_IN_ENV) */ 924 925 /* Called after the relocation - use desired console functions */ 926 int console_init_r(void) 927 { 928 struct stdio_dev *inputdev = NULL, *outputdev = NULL; 929 int i; 930 struct list_head *list = stdio_get_list(); 931 struct list_head *pos; 932 struct stdio_dev *dev; 933 934 console_update_silent(); 935 936 #ifdef CONFIG_SPLASH_SCREEN 937 /* 938 * suppress all output if splash screen is enabled and we have 939 * a bmp to display. We redirect the output from frame buffer 940 * console to serial console in this case or suppress it if 941 * "silent" mode was requested. 942 */ 943 if (env_get("splashimage") != NULL) { 944 if (!(gd->flags & GD_FLG_SILENT)) 945 outputdev = search_device (DEV_FLAGS_OUTPUT, "serial"); 946 } 947 #endif 948 949 /* Scan devices looking for input and output devices */ 950 list_for_each(pos, list) { 951 dev = list_entry(pos, struct stdio_dev, list); 952 953 if ((dev->flags & DEV_FLAGS_INPUT) && (inputdev == NULL)) { 954 inputdev = dev; 955 } 956 if ((dev->flags & DEV_FLAGS_OUTPUT) && (outputdev == NULL)) { 957 outputdev = dev; 958 } 959 if(inputdev && outputdev) 960 break; 961 } 962 963 /* Initializes output console first */ 964 if (outputdev != NULL) { 965 console_setfile(stdout, outputdev); 966 console_setfile(stderr, outputdev); 967 #if CONFIG_IS_ENABLED(CONSOLE_MUX) 968 console_devices[stdout][0] = outputdev; 969 console_devices[stderr][0] = outputdev; 970 #endif 971 } 972 973 /* Initializes input console */ 974 if (inputdev != NULL) { 975 console_setfile(stdin, inputdev); 976 #if CONFIG_IS_ENABLED(CONSOLE_MUX) 977 console_devices[stdin][0] = inputdev; 978 #endif 979 } 980 981 #ifndef CONFIG_SYS_CONSOLE_INFO_QUIET 982 stdio_print_current_devices(); 983 #endif /* CONFIG_SYS_CONSOLE_INFO_QUIET */ 984 985 /* Setting environment variables */ 986 for (i = 0; i < 3; i++) { 987 env_set(stdio_names[i], stdio_devices[i]->name); 988 } 989 990 gd->flags |= GD_FLG_DEVINIT; /* device initialization completed */ 991 992 #if 0 993 /* If nothing usable installed, use only the initial console */ 994 if ((stdio_devices[stdin] == NULL) && (stdio_devices[stdout] == NULL)) 995 return 0; 996 #endif 997 print_pre_console_buffer(PRE_CONSOLE_FLUSHPOINT2_EVERYTHING_BUT_SERIAL); 998 return 0; 999 } 1000 1001 #endif /* CONFIG_IS_ENABLED(SYS_CONSOLE_IS_IN_ENV) */ 1002