1menu "Command line interface" 2 3config CMDLINE 4 bool "Support U-Boot commands" 5 default y 6 help 7 Enable U-Boot's command-line functions. This provides a means 8 to enter commands into U-Boot for a wide variety of purposes. It 9 also allows scripts (containing commands) to be executed. 10 Various commands and command categorys can be indivdually enabled. 11 Depending on the number of commands enabled, this can add 12 substantially to the size of U-Boot. 13 14config HUSH_PARSER 15 bool "Use hush shell" 16 depends on CMDLINE 17 help 18 This option enables the "hush" shell (from Busybox) as command line 19 interpreter, thus enabling powerful command line syntax like 20 if...then...else...fi conditionals or `&&' and '||' 21 constructs ("shell scripts"). 22 23 If disabled, you get the old, much simpler behaviour with a somewhat 24 smaller memory footprint. 25 26config SYS_PROMPT 27 string "Shell prompt" 28 default "=> " 29 help 30 This string is displayed in the command line to the left of the 31 cursor. 32 33menu "Autoboot options" 34 35config AUTOBOOT 36 bool "Autoboot" 37 default y 38 help 39 This enables the autoboot. See doc/README.autoboot for detail. 40 41config AUTOBOOT_KEYED 42 bool "Stop autobooting via specific input key / string" 43 default n 44 help 45 This option enables stopping (aborting) of the automatic 46 boot feature only by issuing a specific input key or 47 string. If not enabled, any input key will abort the 48 U-Boot automatic booting process and bring the device 49 to the U-Boot prompt for user input. 50 51config AUTOBOOT_PROMPT 52 string "Autoboot stop prompt" 53 depends on AUTOBOOT_KEYED 54 default "Autoboot in %d seconds\\n" 55 help 56 This string is displayed before the boot delay selected by 57 CONFIG_BOOTDELAY starts. If it is not defined there is no 58 output indicating that autoboot is in progress. 59 60 Note that this define is used as the (only) argument to a 61 printf() call, so it may contain '%' format specifications, 62 provided that it also includes, sepearated by commas exactly 63 like in a printf statement, the required arguments. It is 64 the responsibility of the user to select only such arguments 65 that are valid in the given context. 66 67config AUTOBOOT_ENCRYPTION 68 bool "Enable encryption in autoboot stopping" 69 depends on AUTOBOOT_KEYED 70 default n 71 72config AUTOBOOT_DELAY_STR 73 string "Delay autobooting via specific input key / string" 74 depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION 75 help 76 This option delays the automatic boot feature by issuing 77 a specific input key or string. If CONFIG_AUTOBOOT_DELAY_STR 78 or the environment variable "bootdelaykey" is specified 79 and this string is received from console input before 80 autoboot starts booting, U-Boot gives a command prompt. The 81 U-Boot prompt will time out if CONFIG_BOOT_RETRY_TIME is 82 used, otherwise it never times out. 83 84config AUTOBOOT_STOP_STR 85 string "Stop autobooting via specific input key / string" 86 depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION 87 help 88 This option enables stopping (aborting) of the automatic 89 boot feature only by issuing a specific input key or 90 string. If CONFIG_AUTOBOOT_STOP_STR or the environment 91 variable "bootstopkey" is specified and this string is 92 received from console input before autoboot starts booting, 93 U-Boot gives a command prompt. The U-Boot prompt never 94 times out, even if CONFIG_BOOT_RETRY_TIME is used. 95 96config AUTOBOOT_KEYED_CTRLC 97 bool "Enable Ctrl-C autoboot interruption" 98 depends on AUTOBOOT_KEYED && !AUTOBOOT_ENCRYPTION 99 default n 100 help 101 This option allows for the boot sequence to be interrupted 102 by ctrl-c, in addition to the "bootdelaykey" and "bootstopkey". 103 Setting this variable provides an escape sequence from the 104 limited "password" strings. 105 106config AUTOBOOT_STOP_STR_SHA256 107 string "Stop autobooting via SHA256 encrypted password" 108 depends on AUTOBOOT_KEYED && AUTOBOOT_ENCRYPTION 109 help 110 This option adds the feature to only stop the autobooting, 111 and therefore boot into the U-Boot prompt, when the input 112 string / password matches a values that is encypted via 113 a SHA256 hash and saved in the environment. 114 115endmenu 116 117source "cmd/fastboot/Kconfig" 118 119comment "Commands" 120 121menu "Info commands" 122 123config CMD_BDI 124 bool "bdinfo" 125 default y 126 help 127 Print board info 128 129config CMD_CONFIG 130 bool "config" 131 select BUILD_BIN2C 132 default SANDBOX 133 help 134 Print ".config" contents. 135 136 If this option is enabled, the ".config" file contents are embedded 137 in the U-Boot image and can be printed on the console by the "config" 138 command. This provides information of which options are enabled on 139 the running U-Boot. 140 141config CMD_CONSOLE 142 bool "coninfo" 143 default y 144 help 145 Print console devices and information. 146 147config CMD_CPU 148 bool "cpu" 149 help 150 Print information about available CPUs. This normally shows the 151 number of CPUs, type (e.g. manufacturer, architecture, product or 152 internal name) and clock frequency. Other information may be 153 available depending on the CPU driver. 154 155config CMD_LICENSE 156 bool "license" 157 select BUILD_BIN2C 158 help 159 Print GPL license text 160 161config CMD_REGINFO 162 bool "reginfo" 163 depends on PPC 164 help 165 Register dump 166 167endmenu 168 169menu "Boot commands" 170 171config CMD_BOOTD 172 bool "bootd" 173 default y 174 help 175 Run the command stored in the environment "bootcmd", i.e. 176 "bootd" does the same thing as "run bootcmd". 177 178config CMD_BOOTM 179 bool "bootm" 180 default y 181 help 182 Boot an application image from the memory. 183 184config CMD_BOOTZ 185 bool "bootz" 186 help 187 Boot the Linux zImage 188 189config CMD_BOOTI 190 bool "booti" 191 depends on ARM64 192 default y 193 help 194 Boot an AArch64 Linux Kernel image from memory. 195 196config CMD_BOOTEFI 197 bool "bootefi" 198 depends on EFI_LOADER 199 default y 200 help 201 Boot an EFI image from memory. 202 203config CMD_BOOTEFI_HELLO_COMPILE 204 bool "Compile a standard EFI hello world binary for testing" 205 depends on CMD_BOOTEFI && (ARM || X86) 206 default y 207 help 208 This compiles a standard EFI hello world application with U-Boot so 209 that it can be used with the test/py testing framework. This is useful 210 for testing that EFI is working at a basic level, and for bringing 211 up EFI support on a new architecture. 212 213 No additional space will be required in the resulting U-Boot binary 214 when this option is enabled. 215 216config CMD_BOOTEFI_HELLO 217 bool "Allow booting a standard EFI hello world for testing" 218 depends on CMD_BOOTEFI_HELLO_COMPILE 219 help 220 This adds a standard EFI hello world application to U-Boot so that 221 it can be used with the 'bootefi hello' command. This is useful 222 for testing that EFI is working at a basic level, and for bringing 223 up EFI support on a new architecture. 224 225config CMD_BOOTMENU 226 bool "bootmenu" 227 select MENU 228 help 229 Add an ANSI terminal boot menu command. 230 231config CMD_ELF 232 bool "bootelf, bootvx" 233 default y 234 help 235 Boot an ELF/vxWorks image from the memory. 236 237config CMD_FDT 238 bool "Flattened Device Tree utility commands" 239 default y 240 depends on OF_LIBFDT 241 help 242 Do FDT related setup before booting into the Operating System. 243 244config CMD_GO 245 bool "go" 246 default y 247 help 248 Start an application at a given address. 249 250config CMD_RUN 251 bool "run" 252 default y 253 help 254 Run the command in the given environment variable. 255 256config CMD_IMI 257 bool "iminfo" 258 default y 259 help 260 Print header information for application image. 261 262config CMD_IMLS 263 bool "imls" 264 default y 265 help 266 List all images found in flash 267 268config CMD_XIMG 269 bool "imxtract" 270 default y 271 help 272 Extract a part of a multi-image. 273 274config CMD_POWEROFF 275 bool "poweroff" 276 help 277 Poweroff/Shutdown the system 278 279config CMD_SPL 280 bool "spl export - Export boot information for Falcon boot" 281 depends on SPL 282 help 283 Falcon mode allows booting directly from SPL into an Operating 284 System such as Linux, thus skipping U-Boot proper. See 285 doc/README.falcon for full information about how to use this 286 command. 287 288config CMD_SPL_NAND_OFS 289 hex "Offset of OS command line args for Falcon-mode NAND boot" 290 depends on CMD_SPL 291 default 0 292 help 293 This provides the offset of the command line arguments for Linux 294 when booting from NAND in Falcon mode. See doc/README.falcon 295 for full information about how to use this option (and also see 296 board/gateworks/gw_ventana/README for an example). 297 298config CMD_SPL_WRITE_SIZE 299 hex "Size of argument area" 300 depends on CMD_SPL 301 default 0x2000 302 help 303 This provides the size of the command-line argument area in NAND 304 flash used by Falcon-mode boot. See the documentation until CMD_SPL 305 for detail. 306 307config CMD_THOR_DOWNLOAD 308 bool "thor - TIZEN 'thor' download" 309 help 310 Implements the 'thor' download protocol. This is a way of 311 downloading a software update over USB from an attached host. 312 There is no documentation about this within the U-Boot source code 313 but you should be able to find something on the interwebs. 314 315endmenu 316 317menu "Environment commands" 318 319config CMD_ASKENV 320 bool "ask for env variable" 321 help 322 Ask for environment variable 323 324config CMD_EXPORTENV 325 bool "env export" 326 default y 327 help 328 Export environments. 329 330config CMD_IMPORTENV 331 bool "env import" 332 default y 333 help 334 Import environments. 335 336config CMD_EDITENV 337 bool "editenv" 338 default y 339 help 340 Edit environment variable. 341 342config CMD_GREPENV 343 bool "search env" 344 help 345 Allow for searching environment variables 346 347config CMD_SAVEENV 348 bool "saveenv" 349 default y 350 help 351 Save all environment variables into the compiled-in persistent 352 storage. 353 354config CMD_ENV_EXISTS 355 bool "env exists" 356 default y 357 help 358 Check if a variable is defined in the environment for use in 359 shell scripting. 360 361config CMD_ENV_CALLBACK 362 bool "env callbacks - print callbacks and their associated variables" 363 help 364 Some environment variable have callbacks defined by 365 U_BOOT_ENV_CALLBACK. These are called when the variable changes. 366 For example changing "baudrate" adjust the serial baud rate. This 367 command lists the currently defined callbacks. 368 369config CMD_ENV_FLAGS 370 bool "env flags -print variables that have non-default flags" 371 help 372 Some environment variables have special flags that control their 373 behaviour. For example, serial# can only be written once and cannot 374 be deleted. This command shows the variables that have special 375 flags. 376 377endmenu 378 379menu "Memory commands" 380 381config CMD_CRC32 382 bool "crc32" 383 select HASH 384 default y 385 help 386 Compute CRC32. 387 388config CRC32_VERIFY 389 bool "crc32 -v" 390 depends on CMD_CRC32 391 help 392 Add -v option to verify data against a crc32 checksum. 393 394config CMD_EEPROM 395 bool "eeprom - EEPROM subsystem" 396 help 397 (deprecated, needs conversion to driver model) 398 Provides commands to read and write EEPROM (Electrically Erasable 399 Programmable Read Only Memory) chips that are connected over an 400 I2C bus. 401 402config CMD_EEPROM_LAYOUT 403 bool "Enable layout-aware eeprom commands" 404 depends on CMD_EEPROM 405 help 406 (deprecated, needs conversion to driver model) 407 When enabled, additional eeprom sub-commands become available. 408 409 eeprom print - prints the contents of the eeprom in a human-readable 410 way (eeprom layout fields, and data formatted to be fit for human 411 consumption). 412 413 eeprom update - allows user to update eeprom fields by specifying 414 the field name, and providing the new data in a human readable format 415 (same format as displayed by the eeprom print command). 416 417 Both commands can either auto detect the layout, or be told which 418 layout to use. 419 420 Feature API: 421 __weak int parse_layout_version(char *str) 422 - override to provide your own layout name parsing 423 __weak void __eeprom_layout_assign(struct eeprom_layout *layout, 424 int layout_version); 425 - override to setup the layout metadata based on the version 426 __weak int eeprom_layout_detect(unsigned char *data) 427 - override to provide your own algorithm for detecting layout 428 version 429 eeprom_field.c 430 - contains various printing and updating functions for common 431 types of eeprom fields. Can be used for defining 432 custom layouts. 433 434config EEPROM_LAYOUT_HELP_STRING 435 string "Tells user what layout names are supported" 436 depends on CMD_EEPROM_LAYOUT 437 default "<not defined>" 438 help 439 Help printed with the LAYOUT VERSIONS part of the 'eeprom' 440 command's help. 441 442config LOOPW 443 bool "loopw" 444 help 445 Infinite write loop on address range 446 447config CMD_MD5SUM 448 bool "md5sum" 449 default n 450 select MD5 451 help 452 Compute MD5 checksum. 453 454config MD5SUM_VERIFY 455 bool "md5sum -v" 456 default n 457 depends on CMD_MD5SUM 458 help 459 Add -v option to verify data against an MD5 checksum. 460 461config CMD_MEMINFO 462 bool "meminfo" 463 help 464 Display memory information. 465 466config CMD_MEMORY 467 bool "md, mm, nm, mw, cp, cmp, base, loop" 468 default y 469 help 470 Memory commands. 471 md - memory display 472 mm - memory modify (auto-incrementing address) 473 nm - memory modify (constant address) 474 mw - memory write (fill) 475 cp - memory copy 476 cmp - memory compare 477 base - print or set address offset 478 loop - initialize loop on address range 479 480config CMD_MEMTEST 481 bool "memtest" 482 help 483 Simple RAM read/write test. 484 485config CMD_MX_CYCLIC 486 bool "mdc, mwc" 487 help 488 mdc - memory display cyclic 489 mwc - memory write cyclic 490 491config CMD_SHA1SUM 492 bool "sha1sum" 493 select SHA1 494 help 495 Compute SHA1 checksum. 496 497config SHA1SUM_VERIFY 498 bool "sha1sum -v" 499 depends on CMD_SHA1SUM 500 help 501 Add -v option to verify data against a SHA1 checksum. 502 503config CMD_STRINGS 504 bool "strings - display strings in memory" 505 help 506 This works similarly to the Unix 'strings' command except that it 507 works with a memory range. String of printable characters found 508 within the range are displayed. The minimum number of characters 509 for a sequence to be considered a string can be provided. 510 511endmenu 512 513menu "Compression commands" 514 515config CMD_LZMADEC 516 bool "lzmadec" 517 select LZMA 518 help 519 Support decompressing an LZMA (Lempel-Ziv-Markov chain algorithm) 520 image from memory. 521 522config CMD_UNZIP 523 bool "unzip" 524 help 525 Uncompress a zip-compressed memory region. 526 527config CMD_ZIP 528 bool "zip" 529 help 530 Compress a memory region with zlib deflate method. 531 532endmenu 533 534menu "Device access commands" 535 536config CMD_ARMFLASH 537 #depends on FLASH_CFI_DRIVER 538 bool "armflash" 539 help 540 ARM Ltd reference designs flash partition access 541 542config CMD_CLK 543 bool "clk - Show clock frequencies" 544 help 545 (deprecated) 546 Shows clock frequences by calling a sock_clk_dump() hook function. 547 This is depreated in favour of using the CLK uclass and accessing 548 clock values from associated drivers. However currently no command 549 exists for this. 550 551config CMD_DEMO 552 bool "demo - Demonstration commands for driver model" 553 depends on DM 554 help 555 Provides a 'demo' command which can be used to play around with 556 driver model. To use this properly you will need to enable one or 557 both of the demo devices (DM_DEMO_SHAPE and DM_DEMO_SIMPLE). 558 Otherwise you will always get an empty list of devices. The demo 559 devices are defined in the sandbox device tree, so the easiest 560 option is to use sandbox and pass the -d point to sandbox's 561 u-boot.dtb file. 562 563config CMD_DFU 564 bool "dfu" 565 select USB_FUNCTION_DFU 566 help 567 Enables the command "dfu" which is used to have U-Boot create a DFU 568 class device via USB. 569 570config CMD_DM 571 bool "dm - Access to driver model information" 572 depends on DM 573 default y 574 help 575 Provides access to driver model data structures and information, 576 such as a list of devices, list of uclasses and the state of each 577 device (e.g. activated). This is not required for operation, but 578 can be useful to see the state of driver model for debugging or 579 interest. 580 581config CMD_FDC 582 bool "fdcboot - Boot from floppy device" 583 help 584 The 'fdtboot' command allows booting an image from a floppy disk. 585 586config CMD_FLASH 587 bool "flinfo, erase, protect" 588 default y 589 help 590 NOR flash support. 591 flinfo - print FLASH memory information 592 erase - FLASH memory 593 protect - enable or disable FLASH write protection 594 595config CMD_FPGA 596 bool "fpga" 597 default y 598 help 599 FPGA support. 600 601config CMD_FPGA_LOADBP 602 bool "fpga loadbp - load partial bitstream (Xilinx only)" 603 depends on CMD_FPGA 604 help 605 Supports loading an FPGA device from a bitstream buffer containing 606 a partial bitstream. 607 608config CMD_FPGA_LOADFS 609 bool "fpga loadfs - load bitstream from FAT filesystem (Xilinx only)" 610 depends on CMD_FPGA 611 help 612 Supports loading an FPGA device from a FAT filesystem. 613 614config CMD_FPGA_LOADMK 615 bool "fpga loadmk - load bitstream from image" 616 depends on CMD_FPGA 617 help 618 Supports loading an FPGA device from a image generated by mkimage. 619 620config CMD_FPGA_LOADP 621 bool "fpga loadp - load partial bitstream" 622 depends on CMD_FPGA 623 help 624 Supports loading an FPGA device from a bitstream buffer containing 625 a partial bitstream. 626 627config CMD_FPGAD 628 bool "fpgad - dump FPGA registers" 629 help 630 (legacy, needs conversion to driver model) 631 Provides a way to dump FPGA registers by calling the board-specific 632 fpga_get_reg() function. This functions similarly to the 'md' 633 command. 634 635config CMD_FUSE 636 bool "fuse - support for the fuse subssystem" 637 help 638 (deprecated - needs conversion to driver model) 639 This allows reading, sensing, programming or overriding fuses 640 which control the behaviour of the device. The command uses the 641 fuse_...() API. 642 643config CMD_GPIO 644 bool "gpio" 645 help 646 GPIO support. 647 648config CMD_GPT 649 bool "GPT (GUID Partition Table) command" 650 select PARTITION_UUIDS 651 select EFI_PARTITION 652 help 653 Enable the 'gpt' command to ready and write GPT style partition 654 tables. 655 656config CMD_GPT_RENAME 657 bool "GPT partition renaming commands" 658 depends on CMD_GPT 659 help 660 Enables the 'gpt' command to interchange names on two GPT 661 partitions via the 'gpt swap' command or to rename single 662 partitions via the 'rename' command. 663 664config CMD_IDE 665 bool "ide - Support for IDE drivers" 666 select IDE 667 help 668 Provides an 'ide' command which allows accessing the IDE drive, 669 reseting the IDE interface, printing the partition table and 670 geting device info. It also enables the 'diskboot' command which 671 permits booting from an IDE drive. 672 673config CMD_IO 674 bool "io - Support for performing I/O accesses" 675 help 676 Provides an 'iod' command to display I/O space and an 'iow' command 677 to write values to the I/O space. This can be useful for manually 678 checking the state of devices during boot when debugging device 679 drivers, etc. 680 681config CMD_IOTRACE 682 bool "iotrace - Support for tracing I/O activity" 683 help 684 Provides an 'iotrace' command which supports recording I/O reads and 685 writes in a trace buffer in memory . It also maintains a checksum 686 of the trace records (even if space is exhausted) so that the 687 sequence of I/O accesses can be verified. 688 689 When debugging drivers it is useful to see what I/O accesses were 690 done and in what order. 691 692 Even if the individual accesses are of little interest it can be 693 useful to verify that the access pattern is consistent each time 694 an operation is performed. In this case a checksum can be used to 695 characterise the operation of a driver. The checksum can be compared 696 across different runs of the operation to verify that the driver is 697 working properly. 698 699 In particular, when performing major refactoring of the driver, where 700 the access pattern should not change, the checksum provides assurance 701 that the refactoring work has not broken the driver. 702 703 This works by sneaking into the io.h heder for an architecture and 704 redirecting I/O accesses through iotrace's tracing mechanism. 705 706 For now no commands are provided to examine the trace buffer. The 707 format is fairly simple, so 'md' is a reasonable substitute. 708 709 Note: The checksum feature is only useful for I/O regions where the 710 contents do not change outside of software control. Where this is not 711 suitable you can fall back to manually comparing the addresses. It 712 might be useful to enhance tracing to only checksum the accesses and 713 not the data read/written. 714 715config CMD_I2C 716 bool "i2c" 717 help 718 I2C support. 719 720config CMD_LOADB 721 bool "loadb" 722 default y 723 help 724 Load a binary file over serial line. 725 726config CMD_LOADS 727 bool "loads" 728 default y 729 help 730 Load an S-Record file over serial line 731 732config CMD_MMC 733 bool "mmc" 734 help 735 MMC memory mapped support. 736 737config CMD_NAND 738 bool "nand" 739 default y if NAND_SUNXI 740 help 741 NAND support. 742 743if CMD_NAND 744config CMD_NAND_TRIMFFS 745 bool "nand write.trimffs" 746 default y if ARCH_SUNXI 747 help 748 Allows one to skip empty pages when flashing something on a NAND. 749 750config CMD_NAND_LOCK_UNLOCK 751 bool "nand lock/unlock" 752 help 753 NAND locking support. 754 755config CMD_NAND_TORTURE 756 bool "nand torture" 757 help 758 NAND torture support. 759 760endif # CMD_NAND 761 762config CMD_MMC_SPI 763 bool "mmc_spi - Set up MMC SPI device" 764 help 765 Provides a way to set up an MMC (Multimedia Card) SPI (Serial 766 Peripheral Interface) device. The device provides a means of 767 accessing an MMC device via SPI using a single data line, limited 768 to 20MHz. It is useful since it reduces the amount of protocol code 769 required. 770 771config CMD_ONENAND 772 bool "onenand - access to onenand device" 773 help 774 OneNAND is a brand of NAND ('Not AND' gate) flash which provides 775 various useful features. This command allows reading, writing, 776 and erasing blocks. It allso provides a way to show and change 777 bad blocks, and test the device. 778 779config CMD_PART 780 bool "part" 781 select PARTITION_UUIDS 782 help 783 Read and display information about the partition table on 784 various media. 785 786config CMD_PCI 787 bool "pci - Access PCI devices" 788 help 789 Provide access to PCI (Peripheral Interconnect Bus), a type of bus 790 used on some devices to allow the CPU to communicate with its 791 peripherals. Sub-commands allow bus enumeration, displaying and 792 changing configuration space and a few other features. 793 794config CMD_PCMCIA 795 bool "pinit - Set up PCMCIA device" 796 help 797 Provides a means to initialise a PCMCIA (Personal Computer Memory 798 Card International Association) device. This is an old standard from 799 about 1990. These devices are typically removable memory or network 800 cards using a standard 68-pin connector. 801 802config CMD_READ 803 bool "read - Read binary data from a partition" 804 help 805 Provides low-level access to the data in a partition. 806 807config CMD_REMOTEPROC 808 bool "remoteproc" 809 depends on REMOTEPROC 810 help 811 Support for Remote Processor control 812 813config CMD_SATA 814 bool "sata - Access SATA subsystem" 815 select SATA 816 help 817 SATA (Serial Advanced Technology Attachment) is a serial bus 818 standard for connecting to hard drives and other storage devices. 819 This command provides information about attached devices and allows 820 reading, writing and other operations. 821 822 SATA replaces PATA (originally just ATA), which stands for Parallel AT 823 Attachment, where AT refers to an IBM AT (Advanced Technology) 824 computer released in 1984. 825 826config CMD_SAVES 827 bool "saves - Save a file over serial in S-Record format" 828 help 829 Provides a way to save a binary file using the Motorola S-Record 830 format over the serial line. 831 832config CMD_SDRAM 833 bool "sdram - Print SDRAM configuration information" 834 help 835 Provides information about attached SDRAM. This assumed that the 836 SDRAM has an EEPROM with information that can be read using the 837 I2C bus. This is only available on some boards. 838 839config CMD_SF 840 bool "sf" 841 help 842 SPI Flash support 843 844config CMD_SF_TEST 845 bool "sf test - Allow testing of SPI flash" 846 help 847 Provides a way to test that SPI flash is working correctly. The 848 test is destructive, in that an area of SPI flash must be provided 849 for the test to use. Performance information is also provided, 850 measuring the performance of reading, writing and erasing in 851 Mbps (Million Bits Per Second). This value should approximately 852 equal the SPI bus speed for a single-bit-wide SPI bus, assuming 853 everything is working properly. 854 855config CMD_SPI 856 bool "sspi" 857 help 858 SPI utility command. 859 860config CMD_TSI148 861 bool "tsi148 - Command to access tsi148 device" 862 help 863 This provides various sub-commands to initialise and configure the 864 Turndra tsi148 device. See the command help for full details. 865 866config CMD_USB 867 bool "usb" 868 help 869 USB support. 870 871config CMD_USB_MASS_STORAGE 872 bool "UMS usb mass storage" 873 help 874 USB mass storage support 875 876endmenu 877 878 879menu "Shell scripting commands" 880 881config CMD_ECHO 882 bool "echo" 883 default y 884 help 885 Echo args to console 886 887config CMD_ITEST 888 bool "itest" 889 default y 890 help 891 Return true/false on integer compare. 892 893config CMD_SOURCE 894 bool "source" 895 default y 896 help 897 Run script from memory 898 899config CMD_SETEXPR 900 bool "setexpr" 901 default y 902 help 903 Evaluate boolean and math expressions and store the result in an env 904 variable. 905 Also supports loading the value at a memory location into a variable. 906 If CONFIG_REGEX is enabled, setexpr also supports a gsub function. 907 908endmenu 909 910menu "Network commands" 911 912config CMD_NET 913 bool "bootp, tftpboot" 914 select NET 915 default y 916 help 917 Network commands. 918 bootp - boot image via network using BOOTP/TFTP protocol 919 tftpboot - boot image via network using TFTP protocol 920 921config CMD_TFTPPUT 922 bool "tftp put" 923 help 924 TFTP put command, for uploading files to a server 925 926config CMD_TFTPSRV 927 bool "tftpsrv" 928 help 929 Act as a TFTP server and boot the first received file 930 931config CMD_RARP 932 bool "rarpboot" 933 help 934 Boot image via network using RARP/TFTP protocol 935 936config CMD_DHCP 937 bool "dhcp" 938 help 939 Boot image via network using DHCP/TFTP protocol 940 941config CMD_PXE 942 bool "pxe" 943 select MENU 944 help 945 Boot image via network using PXE protocol 946 947config CMD_NFS 948 bool "nfs" 949 default y 950 help 951 Boot image via network using NFS protocol. 952 953config CMD_MII 954 bool "mii" 955 help 956 Enable MII utility commands. 957 958config CMD_PING 959 bool "ping" 960 help 961 Send ICMP ECHO_REQUEST to network host 962 963config CMD_CDP 964 bool "cdp" 965 help 966 Perform CDP network configuration 967 968config CMD_SNTP 969 bool "sntp" 970 help 971 Synchronize RTC via network 972 973config CMD_DNS 974 bool "dns" 975 help 976 Lookup the IP of a hostname 977 978config CMD_LINK_LOCAL 979 bool "linklocal" 980 help 981 Acquire a network IP address using the link-local protocol 982 983config CMD_ETHSW 984 bool "ethsw" 985 help 986 Allow control of L2 Ethernet switch commands. These are supported 987 by the vsc9953 Ethernet driver at present. Sub-commands allow 988 operations such as enabling / disabling a port and 989 viewing/maintaining the filtering database (FDB) 990 991endmenu 992 993menu "Misc commands" 994 995config CMD_BMP 996 bool "Enable 'bmp' command" 997 depends on LCD || DM_VIDEO || VIDEO 998 help 999 This provides a way to obtain information about a BMP-format iamge 1000 and to display it. BMP (which presumably stands for BitMaP) is a 1001 file format defined by Microsoft which supports images of various 1002 depths, formats and compression methods. Headers on the file 1003 determine the formats used. This command can be used by first loading 1004 the image into RAM, then using this command to look at it or display 1005 it. 1006 1007config CMD_BSP 1008 bool "Enable board-specific commands" 1009 help 1010 (deprecated: instead, please define a Kconfig option for each command) 1011 1012 Some boards have board-specific commands which are only enabled 1013 during developemnt and need to be turned off for production. This 1014 option provides a way to control this. The commands that are enabled 1015 vary depending on the board. 1016 1017config CMD_BKOPS_ENABLE 1018 bool "mmc bkops enable" 1019 depends on CMD_MMC 1020 default n 1021 help 1022 Enable command for setting manual background operations handshake 1023 on a eMMC device. The feature is optionally available on eMMC devices 1024 conforming to standard >= 4.41. 1025 1026config CMD_BLOCK_CACHE 1027 bool "blkcache - control and stats for block cache" 1028 depends on BLOCK_CACHE 1029 default y if BLOCK_CACHE 1030 help 1031 Enable the blkcache command, which can be used to control the 1032 operation of the cache functions. 1033 This is most useful when fine-tuning the operation of the cache 1034 during development, but also allows the cache to be disabled when 1035 it might hurt performance (e.g. when using the ums command). 1036 1037config CMD_CACHE 1038 bool "icache or dcache" 1039 help 1040 Enable the "icache" and "dcache" commands 1041 1042config CMD_DISPLAY 1043 bool "Enable the 'display' command, for character displays" 1044 help 1045 (this needs porting to driver model) 1046 This enables the 'display' command which allows a string to be 1047 displayed on a simple board-specific display. Implement 1048 display_putc() to use it. 1049 1050config CMD_LED 1051 bool "led" 1052 default y if LED 1053 help 1054 Enable the 'led' command which allows for control of LEDs supported 1055 by the board. The LEDs can be listed with 'led list' and controlled 1056 with led on/off/togle/blink. Any LED drivers can be controlled with 1057 this command, e.g. led_gpio. 1058 1059config CMD_DATE 1060 bool "date" 1061 default y if DM_RTC 1062 help 1063 Enable the 'date' command for getting/setting the time/date in RTC 1064 devices. 1065 1066config CMD_TIME 1067 bool "time" 1068 help 1069 Run commands and summarize execution time. 1070 1071config CMD_GETTIME 1072 bool "gettime - read elapsed time" 1073 help 1074 Enable the 'gettime' command which reads the elapsed time since 1075 U-Boot started running. This shows the time in seconds and 1076 milliseconds. See also the 'bootstage' command which provides more 1077 flexibility for boot timing. 1078 1079# TODO: rename to CMD_SLEEP 1080config CMD_MISC 1081 bool "sleep" 1082 default y 1083 help 1084 Delay execution for some time 1085 1086config CMD_TIMER 1087 bool "timer" 1088 help 1089 Access the system timer. 1090 1091config CMD_SOUND 1092 bool "sound" 1093 depends on SOUND 1094 help 1095 This provides basic access to the U-Boot's sound support. The main 1096 feature is to play a beep. 1097 1098 sound init - set up sound system 1099 sound play - play a sound 1100 1101config CMD_QFW 1102 bool "qfw" 1103 select QFW 1104 help 1105 This provides access to the QEMU firmware interface. The main 1106 feature is to allow easy loading of files passed to qemu-system 1107 via -kernel / -initrd 1108 1109source "cmd/mvebu/Kconfig" 1110 1111config CMD_TERMINAL 1112 bool "terminal - provides a way to attach a serial terminal" 1113 help 1114 Provides a 'cu'-like serial terminal command. This can be used to 1115 access other serial ports from the system console. The terminal 1116 is very simple with no special processing of characters. As with 1117 cu, you can press ~. (tilde followed by period) to exit. 1118 1119endmenu 1120 1121config CMD_BOOTSTAGE 1122 bool "Enable the 'bootstage' command" 1123 depends on BOOTSTAGE 1124 help 1125 Add a 'bootstage' command which supports printing a report 1126 and un/stashing of bootstage data. 1127 1128menu "Power commands" 1129config CMD_PMIC 1130 bool "Enable Driver Model PMIC command" 1131 depends on DM_PMIC 1132 help 1133 This is the pmic command, based on a driver model pmic's API. 1134 Command features are unchanged: 1135 - list - list pmic devices 1136 - pmic dev <id> - show or [set] operating pmic device (NEW) 1137 - pmic dump - dump registers 1138 - pmic read address - read byte of register at address 1139 - pmic write address - write byte to register at address 1140 The only one change for this command is 'dev' subcommand. 1141 1142config CMD_REGULATOR 1143 bool "Enable Driver Model REGULATOR command" 1144 depends on DM_REGULATOR 1145 help 1146 This command is based on driver model regulator's API. 1147 User interface features: 1148 - list - list regulator devices 1149 - regulator dev <id> - show or [set] operating regulator device 1150 - regulator info - print constraints info 1151 - regulator status - print operating status 1152 - regulator value <val] <-f> - print/[set] voltage value [uV] 1153 - regulator current <val> - print/[set] current value [uA] 1154 - regulator mode <id> - print/[set] operating mode id 1155 - regulator enable - enable the regulator output 1156 - regulator disable - disable the regulator output 1157 1158 The '-f' (force) option can be used for set the value which exceeds 1159 the limits, which are found in device-tree and are kept in regulator's 1160 uclass platdata structure. 1161 1162endmenu 1163 1164menu "Security commands" 1165config CMD_AES 1166 bool "Enable the 'aes' command" 1167 select AES 1168 help 1169 This provides a means to encrypt and decrypt data using the AES 1170 (Advanced Encryption Standard). This algorithm uses a symetric key 1171 and is widely used as a streaming cipher. Different key lengths are 1172 supported by the algorithm but this command only supports 128 bits 1173 at present. 1174 1175config CMD_BLOB 1176 bool "Enable the 'blob' command" 1177 help 1178 This is used with the Freescale secure boot mechanism. 1179 1180 Freescale's SEC block has built-in Blob Protocol which provides 1181 a method for protecting user-defined data across system power 1182 cycles. SEC block protects data in a data structure called a Blob, 1183 which provides both confidentiality and integrity protection. 1184 1185 Encapsulating data as a blob 1186 Each time that the Blob Protocol is used to protect data, a 1187 different randomly generated key is used to encrypt the data. 1188 This random key is itself encrypted using a key which is derived 1189 from SoC's non-volatile secret key and a 16 bit Key identifier. 1190 The resulting encrypted key along with encrypted data is called a 1191 blob. The non-volatile secure key is available for use only during 1192 secure boot. 1193 1194 During decapsulation, the reverse process is performed to get back 1195 the original data. 1196 1197 Sub-commands: 1198 blob enc - encapsulating data as a cryptgraphic blob 1199 blob dec - decapsulating cryptgraphic blob to get the data 1200 1201 Syntax: 1202 1203 blob enc src dst len km 1204 1205 Encapsulate and create blob of data $len bytes long 1206 at address $src and store the result at address $dst. 1207 $km is the 16 byte key modifier is also required for 1208 generation/use as key for cryptographic operation. Key 1209 modifier should be 16 byte long. 1210 1211 blob dec src dst len km 1212 1213 Decapsulate the blob of data at address $src and 1214 store result of $len byte at addr $dst. 1215 $km is the 16 byte key modifier is also required for 1216 generation/use as key for cryptographic operation. Key 1217 modifier should be 16 byte long. 1218 1219config CMD_HASH 1220 bool "Support 'hash' command" 1221 select HASH 1222 help 1223 This provides a way to hash data in memory using various supported 1224 algorithms (such as SHA1, MD5, CRC32). The computed digest can be 1225 saved to memory or to an environment variable. It is also possible 1226 to verify a hash against data in memory. 1227 1228config HASH_VERIFY 1229 bool "hash -v" 1230 depends on CMD_HASH 1231 help 1232 Add -v option to verify data against a hash. 1233 1234config CMD_TPM 1235 bool "Enable the 'tpm' command" 1236 depends on TPM 1237 help 1238 This provides a means to talk to a TPM from the command line. A wide 1239 range of commands if provided - see 'tpm help' for details. The 1240 command requires a suitable TPM on your board and the correct driver 1241 must be enabled. 1242 1243config CMD_TPM_TEST 1244 bool "Enable the 'tpm test' command" 1245 depends on CMD_TPM 1246 help 1247 This provides a a series of tests to confirm that the TPM is working 1248 correctly. The tests cover initialisation, non-volatile RAM, extend, 1249 global lock and checking that timing is within expectations. The 1250 tests pass correctly on Infineon TPMs but may need to be adjusted 1251 for other devices. 1252 1253endmenu 1254 1255menu "Firmware commands" 1256config CMD_CROS_EC 1257 bool "Enable crosec command" 1258 depends on CROS_EC 1259 default y 1260 help 1261 Enable command-line access to the Chrome OS EC (Embedded 1262 Controller). This provides the 'crosec' command which has 1263 a number of sub-commands for performing EC tasks such as 1264 updating its flash, accessing a small saved context area 1265 and talking to the I2C bus behind the EC (if there is one). 1266endmenu 1267 1268menu "Filesystem commands" 1269config CMD_CBFS 1270 bool "Enable the 'cbfs' command" 1271 depends on FS_CBFS 1272 help 1273 Define this to enable support for reading from a Coreboot 1274 filesystem. This is a ROM-based filesystem used for accessing files 1275 on systems that use coreboot as the first boot-loader and then load 1276 U-Boot to actually boot the Operating System. Available commands are 1277 cbfsinit, cbfsinfo, cbfsls and cbfsload. 1278 1279config CMD_CRAMFS 1280 bool "Enable the 'cramfs' command" 1281 depends on FS_CRAMFS 1282 help 1283 This provides commands for dealing with CRAMFS (Compressed ROM 1284 filesystem). CRAMFS is useful when space is tight since files are 1285 compressed. Two commands are provided: 1286 1287 cramfsls - lists files in a cramfs image 1288 cramfsload - loads a file from a cramfs image 1289 1290config CMD_EXT2 1291 bool "ext2 command support" 1292 help 1293 Enables EXT2 FS command 1294 1295config CMD_EXT4 1296 bool "ext4 command support" 1297 help 1298 Enables EXT4 FS command 1299 1300config CMD_EXT4_WRITE 1301 depends on CMD_EXT4 1302 bool "ext4 write command support" 1303 help 1304 Enables EXT4 FS write command 1305 1306config CMD_FAT 1307 bool "FAT command support" 1308 select FS_FAT 1309 help 1310 Support for the FAT fs 1311 1312config CMD_FS_GENERIC 1313 bool "filesystem commands" 1314 help 1315 Enables filesystem commands (e.g. load, ls) that work for multiple 1316 fs types. 1317 1318config CMD_FS_UUID 1319 bool "fsuuid command" 1320 help 1321 Enables fsuuid command for filesystem UUID. 1322 1323config CMD_JFFS2 1324 bool "jffs2 command" 1325 select FS_JFFS2 1326 help 1327 Enables commands to support the JFFS2 (Journalling Flash File System 1328 version 2) filesystem. This enables fsload, ls and fsinfo which 1329 provide the ability to load files, list directories and obtain 1330 filesystem information. 1331 1332config CMD_MTDPARTS 1333 bool "MTD partition support" 1334 help 1335 MTD partition support 1336 1337config MTDIDS_DEFAULT 1338 string "Default MTD IDs" 1339 depends on CMD_MTDPARTS 1340 help 1341 Defines a default MTD ID 1342 1343config MTDPARTS_DEFAULT 1344 string "Default MTD partition scheme" 1345 depends on CMD_MTDPARTS 1346 help 1347 Defines a default MTD partitioning scheme in the Linux MTD command 1348 line partitions format 1349 1350config CMD_MTDPARTS_SPREAD 1351 bool "Padd partition size to take account of bad blocks" 1352 depends on CMD_MTDPARTS 1353 help 1354 This enables the 'spread' sub-command of the mtdparts command. 1355 This command will modify the existing mtdparts variable by increasing 1356 the size of the partitions such that 1) each partition's net size is 1357 at least as large as the size specified in the mtdparts variable and 1358 2) each partition starts on a good block. 1359 1360config CMD_REISER 1361 bool "reiser - Access to reiserfs filesystems" 1362 help 1363 This provides two commands which operate on a resierfs filesystem, 1364 commonly used some years ago: 1365 1366 reiserls - list files 1367 reiserload - load a file 1368 1369config CMD_SCSI 1370 bool "scsi - Access to SCSI devices" 1371 default y if SCSI 1372 help 1373 This provides a 'scsi' command which provides access to SCSI (Small 1374 Computer System Interface) devices. The command provides a way to 1375 scan the bus, reset the bus, read and write data and get information 1376 about devices. 1377 1378config CMD_YAFFS2 1379 bool "yaffs2 - Access of YAFFS2 filesystem" 1380 depends on YAFFS2 1381 default y 1382 help 1383 This provides commands for accessing a YAFFS2 filesystem. Yet 1384 Another Flash Filesystem 2 is a filesystem designed specifically 1385 for NAND flash. It incorporates bad-block management and ensures 1386 that device writes are sequential regardless of filesystem 1387 activity. 1388 1389endmenu 1390 1391menu "Debug commands" 1392 1393config CMD_BEDBUG 1394 bool "bedbug" 1395 help 1396 The bedbug (emBEDded deBUGger) command provides debugging features 1397 for some PowerPC processors. For details please see the 1398 docuemntation in doc/README.beddbug 1399 1400config CMD_DIAG 1401 bool "diag - Board diagnostics" 1402 help 1403 This command provides access to board diagnostic tests. These are 1404 called Power-on Self Tests (POST). The command allows listing of 1405 available tests and running either all the tests, or specific tests 1406 identified by name. 1407 1408config CMD_IRQ 1409 bool "irq - Show information about interrupts" 1410 depends on !ARM && !MIPS && !SH 1411 help 1412 This enables two commands: 1413 1414 interrupts - enable or disable interrupts 1415 irqinfo - print device-specific interrupt information 1416 1417config CMD_KGDB 1418 bool "kgdb - Allow debugging of U-Boot with gdb" 1419 help 1420 This enables a 'kgdb' command which allows gdb to connect to U-Boot 1421 over a serial link for debugging purposes. This allows 1422 single-stepping, inspecting variables, etc. This is supported only 1423 on PowerPC at present. 1424 1425config CMD_TRACE 1426 bool "trace - Support tracing of function calls and timing" 1427 help 1428 Enables a command to control using of function tracing within 1429 U-Boot. This allows recording of call traces including timing 1430 information. The command can write data to memory for exporting 1431 for analsys (e.g. using bootchart). See doc/README.trace for full 1432 details. 1433 1434endmenu 1435 1436config CMD_UBI 1437 tristate "Enable UBI - Unsorted block images commands" 1438 select CRC32 1439 select MTD_UBI 1440 select CMD_MTDPARTS 1441 default y if NAND_SUNXI 1442 help 1443 UBI is a software layer above MTD layer which admits use of LVM-like 1444 logical volumes on top of MTD devices, hides some complexities of 1445 flash chips like wear and bad blocks and provides some other useful 1446 capabilities. Please, consult the MTD web site for more details 1447 (www.linux-mtd.infradead.org). Activate this option if you want 1448 to use U-Boot UBI commands. 1449 1450config CMD_UBIFS 1451 tristate "Enable UBIFS - Unsorted block images filesystem commands" 1452 depends on CMD_UBI 1453 select CRC32 1454 select LZO 1455 default y if CMD_UBI 1456 help 1457 UBIFS is a file system for flash devices which works on top of UBI. 1458 1459endmenu 1460