1*0299c90fSStefan RoeseUpdate from original Marvell U-Boot to mainline U-Boot: 2*0299c90fSStefan Roese------------------------------------------------------- 3*0299c90fSStefan Roese 4*0299c90fSStefan RoeseGenerate the U-Boot image with these commands: 5*0299c90fSStefan Roese 6*0299c90fSStefan Roese$ make clearfog_defconfig 7*0299c90fSStefan Roese$ make 8*0299c90fSStefan Roese 9*0299c90fSStefan RoeseThe resulting image including the SPL binary with the 10*0299c90fSStefan Roesefull DDR setup is "u-boot-spl.kwb". 11*0299c90fSStefan Roese 12*0299c90fSStefan RoeseNow all you need to do is copy this image on a SD card. 13*0299c90fSStefan RoeseFor example with this command: 14*0299c90fSStefan Roese 15*0299c90fSStefan Roese$ sudo dd if=u-boot-spl.kwb of=/dev/sdX bs=512 seek=1 16*0299c90fSStefan Roese 17*0299c90fSStefan RoesePlease use the correct device node for your setup instead 18*0299c90fSStefan Roeseof "/dev/sdX" here! 19