1 /* 2 * (C) Copyright 2010,2011 3 * NVIDIA Corporation <www.nvidia.com> 4 * 5 * See file CREDITS for list of people who contributed to this 6 * project. 7 * 8 * This program is free software; you can redistribute it and/or 9 * modify it under the terms of the GNU General Public License as 10 * published by the Free Software Foundation; either version 2 of 11 * the License, or (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 21 * MA 02111-1307 USA 22 */ 23 24 #include <common.h> 25 #include <asm/io.h> 26 #include <asm/arch/tegra2.h> 27 #include <asm/arch/pinmux.h> 28 #include <asm/gpio.h> 29 #ifdef CONFIG_TEGRA2_MMC 30 #include <mmc.h> 31 #endif 32 #include "../common/board.h" 33 34 /* 35 * Routine: gpio_config_uart_seaboard 36 * Description: Force GPIO_PI3 low on Seaboard so UART4 works. 37 */ 38 static void gpio_config_uart_seaboard(void) 39 { 40 int gp = GPIO_PI3; 41 struct gpio_ctlr *gpio = (struct gpio_ctlr *)NV_PA_GPIO_BASE; 42 struct gpio_ctlr_bank *bank = &gpio->gpio_bank[GPIO_BANK(gp)]; 43 u32 val; 44 45 /* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */ 46 val = readl(&bank->gpio_config[GPIO_PORT(gp)]); 47 val |= 1 << GPIO_BIT(gp); 48 writel(val, &bank->gpio_config[GPIO_PORT(gp)]); 49 50 val = readl(&bank->gpio_out[GPIO_PORT(gp)]); 51 val &= ~(1 << GPIO_BIT(gp)); 52 writel(val, &bank->gpio_out[GPIO_PORT(gp)]); 53 54 val = readl(&bank->gpio_dir_out[GPIO_PORT(gp)]); 55 val |= 1 << GPIO_BIT(gp); 56 writel(val, &bank->gpio_dir_out[GPIO_PORT(gp)]); 57 } 58 59 void gpio_config_uart(void) 60 { 61 if (machine_is_ventana()) 62 return; 63 gpio_config_uart_seaboard(); 64 } 65 66 #ifdef CONFIG_TEGRA2_MMC 67 /* 68 * Routine: pin_mux_mmc 69 * Description: setup the pin muxes/tristate values for the SDMMC(s) 70 */ 71 static void pin_mux_mmc(void) 72 { 73 /* SDMMC4: config 3, x8 on 2nd set of pins */ 74 pinmux_set_func(PINGRP_ATB, PMUX_FUNC_SDIO4); 75 pinmux_set_func(PINGRP_GMA, PMUX_FUNC_SDIO4); 76 pinmux_set_func(PINGRP_GME, PMUX_FUNC_SDIO4); 77 78 pinmux_tristate_disable(PINGRP_ATB); 79 pinmux_tristate_disable(PINGRP_GMA); 80 pinmux_tristate_disable(PINGRP_GME); 81 82 /* SDMMC3: SDIO3_CLK, SDIO3_CMD, SDIO3_DAT[3:0] */ 83 pinmux_set_func(PINGRP_SDB, PMUX_FUNC_SDIO3); 84 pinmux_set_func(PINGRP_SDC, PMUX_FUNC_SDIO3); 85 pinmux_set_func(PINGRP_SDD, PMUX_FUNC_SDIO3); 86 87 pinmux_tristate_disable(PINGRP_SDC); 88 pinmux_tristate_disable(PINGRP_SDD); 89 pinmux_tristate_disable(PINGRP_SDB); 90 91 /* For power GPIO PI6 */ 92 pinmux_tristate_disable(PINGRP_ATA); 93 /* For CD GPIO PI5 */ 94 pinmux_tristate_disable(PINGRP_ATC); 95 } 96 97 /* this is a weak define that we are overriding */ 98 int board_mmc_init(bd_t *bd) 99 { 100 debug("board_mmc_init called\n"); 101 102 /* Enable muxes, etc. for SDMMC controllers */ 103 pin_mux_mmc(); 104 105 debug("board_mmc_init: init eMMC\n"); 106 /* init dev 0, eMMC chip, with 4-bit bus */ 107 /* The board has an 8-bit bus, but 8-bit doesn't work yet */ 108 tegra2_mmc_init(0, 4, -1, -1); 109 110 debug("board_mmc_init: init SD slot\n"); 111 /* init dev 1, SD slot, with 4-bit bus */ 112 tegra2_mmc_init(1, 4, GPIO_PI6, GPIO_PI5); 113 114 return 0; 115 } 116 #endif 117