1/* 2 * Copyright (C) 2017 Álvaro Fernández Rojas <noltari@gmail.com> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7#include <dt-bindings/clock/bcm6328-clock.h> 8#include <dt-bindings/gpio/gpio.h> 9#include <dt-bindings/power-domain/bcm6328-power-domain.h> 10#include <dt-bindings/reset/bcm6328-reset.h> 11#include "skeleton.dtsi" 12 13/ { 14 compatible = "brcm,bcm6328"; 15 16 cpus { 17 reg = <0x10000000 0x4>; 18 #address-cells = <1>; 19 #size-cells = <0>; 20 u-boot,dm-pre-reloc; 21 22 cpu@0 { 23 compatible = "brcm,bcm6328-cpu", "mips,mips4Kc"; 24 device_type = "cpu"; 25 reg = <0>; 26 u-boot,dm-pre-reloc; 27 }; 28 29 cpu@1 { 30 compatible = "brcm,bcm6328-cpu", "mips,mips4Kc"; 31 device_type = "cpu"; 32 reg = <1>; 33 u-boot,dm-pre-reloc; 34 }; 35 }; 36 37 clocks { 38 compatible = "simple-bus"; 39 #address-cells = <1>; 40 #size-cells = <1>; 41 u-boot,dm-pre-reloc; 42 43 periph_osc: periph-osc { 44 compatible = "fixed-clock"; 45 #clock-cells = <0>; 46 clock-frequency = <50000000>; 47 u-boot,dm-pre-reloc; 48 }; 49 50 periph_clk: periph-clk { 51 compatible = "brcm,bcm6345-clk"; 52 reg = <0x10000004 0x4>; 53 #clock-cells = <1>; 54 }; 55 }; 56 57 ubus { 58 compatible = "simple-bus"; 59 #address-cells = <1>; 60 #size-cells = <1>; 61 u-boot,dm-pre-reloc; 62 63 periph_rst: reset-controller@10000010 { 64 compatible = "brcm,bcm6345-reset"; 65 reg = <0x10000010 0x4>; 66 #reset-cells = <1>; 67 }; 68 69 pll_cntl: syscon@10000068 { 70 compatible = "syscon"; 71 reg = <0x10000068 0x4>; 72 }; 73 74 syscon-reboot { 75 compatible = "syscon-reboot"; 76 regmap = <&pll_cntl>; 77 offset = <0x0>; 78 mask = <0x1>; 79 }; 80 81 wdt: watchdog@1000005c { 82 compatible = "brcm,bcm6345-wdt"; 83 reg = <0x1000005c 0xc>; 84 clocks = <&periph_osc>; 85 }; 86 87 gpio: gpio-controller@10000084 { 88 compatible = "brcm,bcm6345-gpio"; 89 reg = <0x10000084 0x4>, <0x1000008c 0x4>; 90 gpio-controller; 91 #gpio-cells = <2>; 92 93 status = "disabled"; 94 }; 95 96 uart0: serial@10000100 { 97 compatible = "brcm,bcm6345-uart"; 98 reg = <0x10000100 0x18>; 99 clocks = <&periph_osc>; 100 101 status = "disabled"; 102 }; 103 104 uart1: serial@10000120 { 105 compatible = "brcm,bcm6345-uart"; 106 reg = <0x10000120 0x18>; 107 clocks = <&periph_osc>; 108 109 status = "disabled"; 110 }; 111 112 leds: led-controller@10000800 { 113 compatible = "brcm,bcm6328-leds"; 114 reg = <0x10000800 0x24>; 115 #address-cells = <1>; 116 #size-cells = <0>; 117 118 status = "disabled"; 119 }; 120 121 periph_pwr: power-controller@10001848 { 122 compatible = "brcm,bcm6328-power-domain"; 123 reg = <0x10001848 0x4>; 124 #power-domain-cells = <1>; 125 }; 126 127 memory-controller@10003000 { 128 compatible = "brcm,bcm6328-mc"; 129 reg = <0x10003000 0x864>; 130 u-boot,dm-pre-reloc; 131 }; 132 }; 133}; 134