xref: /rk3399_rockchip-uboot/arch/arm/mach-rockchip/Makefile (revision f36ea2f6e17621c4d9dd97c4dbfab62d03d061df) 
1#
2# Copyright (c) 2014 Google, Inc
3#
4# SPDX-License-Identifier:	GPL-2.0+
5#
6
7# We don't want the bootrom-helper present in a full U-Boot build, as
8# this may have entered from ATF with the stack-pointer pointing to
9# inaccessible/protected memory (and the bootrom-helper assumes that
10# the stack-pointer is valid before switching to the U-Boot stack).
11obj-spl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o
12obj-tpl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o
13
14obj-tpl-y += tpl.o
15obj-spl-y += spl.o spl-boot-order.o
16
17ifndef CONFIG_TPL_BUILD
18obj-$(CONFIG_$(SPL_)FIT) += fit_misc.o
19ifdef CONFIG_SPL_BUILD
20obj-y += spl_boot_mode.o
21endif
22endif
23
24ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
25
26# Always include boot_mode.o, as we bypass it (i.e. turn it off)
27# inside of boot_mode.c when CONFIG_BOOT_MODE_REG is 0.  This way,
28# we can have the preprocessor correctly recognise both 0x0 and 0
29# meaning "turn it off".
30
31obj-y += chip_info.o
32ifndef CONFIG_SUPPORT_USBPLUG
33obj-y += lowlevel_init.o
34obj-y += boot_mode.o
35obj-y += boot_rkimg.o
36obj-y += board.o
37obj-y += iomem.o
38obj-y += memblk.o
39obj-y += hotkey.o
40else
41obj-y += usbplug.o
42endif
43
44obj-$(CONFIG_USING_KERNEL_DTB) += kernel_dtb.o
45obj-$(CONFIG_ROCKCHIP_FIT_IMAGE) += fit.o
46obj-$(CONFIG_ROCKCHIP_UIMAGE) += uimage.o
47obj-$(CONFIG_ROCKCHIP_SMCCC) += rockchip_smccc.o
48obj-$(CONFIG_ROCKCHIP_VENDOR_PARTITION) += vendor.o
49obj-$(CONFIG_ROCKCHIP_RESOURCE_IMAGE) += resource_img.o resource_logo.o
50obj-$(CONFIG_ROCKCHIP_HWID_DTB) += resource_hwid.o
51obj-$(CONFIG_ROCKCHIP_DEBUGGER) += rockchip_debugger.o
52obj-$(CONFIG_FPGA_ROCKCHIP) += fpga.o
53endif
54
55obj-$(CONFIG_RAM) += param.o
56obj-$(CONFIG_$(SPL_TPL_)RAM) += sdram.o
57obj-$(CONFIG_SPL_KERNEL_BOOT) += spl_resource_img.o
58
59obj-$(CONFIG_ROCKCHIP_PX30) += px30/
60obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036/
61obj-$(CONFIG_ROCKCHIP_RK3066) += rk3066/
62obj-$(CONFIG_ROCKCHIP_RK3128) += rk3128/
63ifndef CONFIG_TPL_BUILD
64obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188/
65endif
66obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x/
67obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288/
68obj-$(CONFIG_ROCKCHIP_RK3308) += rk3308/
69obj-$(CONFIG_ROCKCHIP_RK3328) += rk3328/
70obj-$(CONFIG_ROCKCHIP_RK3368) += rk3368/
71obj-$(CONFIG_ROCKCHIP_RK3399) += rk3399/
72obj-$(CONFIG_ROCKCHIP_RK3568) += rk3568/
73obj-$(CONFIG_ROCKCHIP_RK1808) += rk1808/
74obj-$(CONFIG_ROCKCHIP_RV1108) += rv1108/
75obj-$(CONFIG_ROCKCHIP_RV1126) += rv1126/
76
77# Clear out SPL objects, in case this is a TPL build
78obj-spl-$(CONFIG_TPL_BUILD) =
79
80# Now add SPL/TPL objects back into the main build
81obj-$(CONFIG_SPL_BUILD) += $(obj-spl-y)
82obj-$(CONFIG_TPL_BUILD) += $(obj-tpl-y)
83
84obj-$(CONFIG_ROCKCHIP_PRELOADER_ATAGS) += rk_atags.o
85obj-$(CONFIG_SET_DFU_ALT_INFO) += dfu_alt_info.o
86