xref: /rk3399_rockchip-uboot/arch/arm/mach-rockchip/Makefile (revision 827e2ae92e2103f82dab5b54228ad24e40db6263) 
1#
2# Copyright (c) 2014 Google, Inc
3#
4# SPDX-License-Identifier:	GPL-2.0+
5#
6
7# We don't want the bootrom-helper present in a full U-Boot build, as
8# this may have entered from ATF with the stack-pointer pointing to
9# inaccessible/protected memory (and the bootrom-helper assumes that
10# the stack-pointer is valid before switching to the U-Boot stack).
11obj-spl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o
12obj-tpl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o
13
14obj-tpl-y += tpl.o
15obj-spl-y += spl.o spl-boot-order.o
16
17ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
18
19# Always include boot_mode.o, as we bypass it (i.e. turn it off)
20# inside of boot_mode.c when CONFIG_BOOT_MODE_REG is 0.  This way,
21# we can have the preprocessor correctly recognise both 0x0 and 0
22# meaning "turn it off".
23
24obj-y += chip_info.o
25ifndef CONFIG_SUPPORT_USBPLUG
26obj-y += boot_mode.o
27obj-y += boot_rkimg.o
28obj-y += board.o
29obj-y += iomem.o
30obj-y += memblk.o
31obj-y += hotkey.o
32else
33obj-y += usbplug.o
34endif
35
36obj-$(CONFIG_USING_KERNEL_DTB) += kernel_dtb.o
37obj-$(CONFIG_ROCKCHIP_FIT_IMAGE) += fit.o
38obj-$(CONFIG_ROCKCHIP_UIMAGE) += uimage.o
39obj-$(CONFIG_ROCKCHIP_SMCCC) += rockchip_smccc.o
40obj-$(CONFIG_ROCKCHIP_VENDOR_PARTITION) += vendor.o
41obj-$(CONFIG_ROCKCHIP_RESOURCE_IMAGE) += resource_img.o
42obj-$(CONFIG_ROCKCHIP_DEBUGGER) += rockchip_debugger.o
43endif
44
45obj-$(CONFIG_$(SPL_TPL_)RAM) += param.o
46obj-$(CONFIG_$(SPL_TPL_)RAM) += sdram.o
47obj-$(CONFIG_SPL_KERNEL_BOOT) += spl_resource_img.o
48
49obj-$(CONFIG_ROCKCHIP_PX30) += px30/
50obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036/
51obj-$(CONFIG_ROCKCHIP_RK3066) += rk3066/
52obj-$(CONFIG_ROCKCHIP_RK3128) += rk3128/
53ifndef CONFIG_TPL_BUILD
54obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188/
55endif
56obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x/
57obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288/
58obj-$(CONFIG_ROCKCHIP_RK3308) += rk3308/
59obj-$(CONFIG_ROCKCHIP_RK3328) += rk3328/
60obj-$(CONFIG_ROCKCHIP_RK3368) += rk3368/
61obj-$(CONFIG_ROCKCHIP_RK3399) += rk3399/
62obj-$(CONFIG_ROCKCHIP_RK1808) += rk1808/
63obj-$(CONFIG_ROCKCHIP_RV1108) += rv1108/
64obj-$(CONFIG_ROCKCHIP_RV1126) += rv1126/
65
66# Clear out SPL objects, in case this is a TPL build
67obj-spl-$(CONFIG_TPL_BUILD) =
68
69# Now add SPL/TPL objects back into the main build
70obj-$(CONFIG_SPL_BUILD) += $(obj-spl-y)
71obj-$(CONFIG_TPL_BUILD) += $(obj-tpl-y)
72
73obj-$(CONFIG_ROCKCHIP_PRELOADER_ATAGS) += rk_atags.o
74