xref: /rk3399_rockchip-uboot/arch/arm/mach-rockchip/Makefile (revision 7e044b9aeceaa3c07ba4dd8939761bd87f4c8300) 
1#
2# Copyright (c) 2014 Google, Inc
3#
4# SPDX-License-Identifier:	GPL-2.0+
5#
6
7# We don't want the bootrom-helper present in a full U-Boot build, as
8# this may have entered from ATF with the stack-pointer pointing to
9# inaccessible/protected memory (and the bootrom-helper assumes that
10# the stack-pointer is valid before switching to the U-Boot stack).
11obj-spl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o
12obj-tpl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o
13
14obj-tpl-y += tpl.o
15ifndef CONFIG_SPL_DECOMP_HEADER
16obj-spl-y += spl.o spl-boot-order.o
17endif
18
19ifndef CONFIG_TPL_BUILD
20obj-$(CONFIG_$(SPL_)FIT) += fit_misc.o
21ifdef CONFIG_SPL_BUILD
22obj-y += spl_boot_mode.o
23obj-$(CONFIG_ROCKCHIP_META) += rk_meta.o
24endif
25endif
26
27ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
28
29# Always include boot_mode.o, as we bypass it (i.e. turn it off)
30# inside of boot_mode.c when CONFIG_BOOT_MODE_REG is 0.  This way,
31# we can have the preprocessor correctly recognise both 0x0 and 0
32# meaning "turn it off".
33
34obj-y += chip_info.o
35ifndef CONFIG_SUPPORT_USBPLUG
36obj-y += lowlevel_init.o
37obj-y += boot_mode.o
38obj-y += boot_rkimg.o
39obj-y += board.o
40obj-y += iomem.o
41obj-y += memblk.o
42obj-y += hotkey.o
43else
44obj-y += usbplug.o
45endif
46
47obj-$(CONFIG_USING_KERNEL_DTB) += kernel_dtb.o
48obj-$(CONFIG_ROCKCHIP_FIT_IMAGE) += fit.o
49obj-$(CONFIG_ROCKCHIP_UIMAGE) += uimage.o
50obj-$(CONFIG_ROCKCHIP_SMCCC) += rockchip_smccc.o
51obj-$(CONFIG_ROCKCHIP_VENDOR_PARTITION) += vendor.o vendor_misc.o
52obj-$(CONFIG_ROCKCHIP_RESOURCE_IMAGE) += resource_img.o resource_logo.o
53obj-$(CONFIG_ROCKCHIP_HWID_DTB) += resource_hwid.o
54obj-$(CONFIG_ROCKCHIP_DEBUGGER) += rockchip_debugger.o
55obj-$(CONFIG_FPGA_ROCKCHIP) += fpga.o
56endif
57
58obj-$(CONFIG_RAM) += param.o
59obj-$(CONFIG_$(SPL_TPL_)RAM) += sdram.o
60obj-$(CONFIG_SPL_KERNEL_BOOT) += spl_resource_img.o
61
62obj-$(CONFIG_ROCKCHIP_PX30) += px30/
63obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036/
64obj-$(CONFIG_ROCKCHIP_RK3066) += rk3066/
65obj-$(CONFIG_ROCKCHIP_RK3128) += rk3128/
66ifndef CONFIG_TPL_BUILD
67obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188/
68endif
69obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x/
70obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288/
71obj-$(CONFIG_ROCKCHIP_RK3308) += rk3308/
72obj-$(CONFIG_ROCKCHIP_RK3328) += rk3328/
73obj-$(CONFIG_ROCKCHIP_RK3368) += rk3368/
74obj-$(CONFIG_ROCKCHIP_RK3399) += rk3399/
75obj-$(CONFIG_ROCKCHIP_RK3568) += rk3568/
76obj-$(CONFIG_ROCKCHIP_RK3588) += rk3588/
77obj-$(CONFIG_ROCKCHIP_RK1808) += rk1808/
78obj-$(CONFIG_ROCKCHIP_RV1106) += rv1106/
79obj-$(CONFIG_ROCKCHIP_RV1108) += rv1108/
80obj-$(CONFIG_ROCKCHIP_RV1126) += rv1126/
81
82# Clear out SPL objects, in case this is a TPL build
83obj-spl-$(CONFIG_TPL_BUILD) =
84
85# Now add SPL/TPL objects back into the main build
86obj-$(CONFIG_SPL_BUILD) += $(obj-spl-y)
87obj-$(CONFIG_TPL_BUILD) += $(obj-tpl-y)
88
89obj-$(CONFIG_ROCKCHIP_PRELOADER_ATAGS) += rk_atags.o
90obj-$(CONFIG_SET_DFU_ALT_INFO) += dfu_alt_info.o
91