xref: /rk3399_rockchip-uboot/arch/arm/mach-rockchip/Makefile (revision 4c0727fd0eeea63d2c8ef85c767123e14e223457) 
1#
2# Copyright (c) 2014 Google, Inc
3#
4# SPDX-License-Identifier:	GPL-2.0+
5#
6
7# We don't want the bootrom-helper present in a full U-Boot build, as
8# this may have entered from ATF with the stack-pointer pointing to
9# inaccessible/protected memory (and the bootrom-helper assumes that
10# the stack-pointer is valid before switching to the U-Boot stack).
11obj-spl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o
12obj-tpl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o
13
14obj-tpl-$(CONFIG_ROCKCHIP_RK3066) += rk3066-board-tpl.o
15obj-tpl-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-tpl.o
16obj-tpl-$(CONFIG_ROCKCHIP_RK3368) += rk3368-board-tpl.o
17obj-tpl-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board-tpl.o
18obj-tpl-$(CONFIG_ROCKCHIP_RK3328) += rk3328-board-tpl.o
19
20obj-spl-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board-spl.o
21obj-spl-$(CONFIG_ROCKCHIP_RK3066) += rk3066-board-spl.o
22obj-spl-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board-spl.o
23obj-spl-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board-spl.o spl-boot-order.o
24obj-spl-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board-spl.o
25obj-spl-$(CONFIG_ROCKCHIP_RK3328) += rk3328-board-spl.o
26obj-spl-$(CONFIG_ROCKCHIP_RK3368) += rk3368-board-spl.o spl-boot-order.o
27obj-spl-$(CONFIG_ROCKCHIP_RK3399) += rk3399-board-spl.o spl-boot-order.o
28
29ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
30
31# Always include boot_mode.o, as we bypass it (i.e. turn it off)
32# inside of boot_mode.c when CONFIG_BOOT_MODE_REG is 0.  This way,
33# we can have the preprocessor correctly recognise both 0x0 and 0
34# meaning "turn it off".
35obj-y += boot_mode.o
36
37obj-$(CONFIG_ROCKCHIP_CRC) += rockchip_crc.o
38obj-$(CONFIG_ROCKCHIP_SMCCC) += rockchip_smccc.o
39obj-$(CONFIG_ROCKCHIP_VENDOR_PARTITION) += vendor.o
40obj-$(CONFIG_ROCKCHIP_RESOURCE_IMAGE) += resource_img.o
41obj-$(CONFIG_ROCKCHIP_RK3066) += rk3066-board.o
42obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188-board.o
43obj-$(CONFIG_ROCKCHIP_RK3128) += rk3128-board.o
44obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x-board.o
45obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288-board.o
46obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036-board.o
47endif
48
49obj-$(CONFIG_$(SPL_TPL_)RAM) += sdram_common.o
50
51ifndef CONFIG_ARM64
52obj-y += rk_timer.o
53endif
54
55obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036/
56obj-$(CONFIG_ROCKCHIP_RK3066) += rk3066/
57obj-$(CONFIG_ROCKCHIP_RK3128) += rk3128/
58ifndef CONFIG_TPL_BUILD
59obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188/
60endif
61obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x/
62obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288/
63obj-$(CONFIG_ROCKCHIP_RK3328) += rk3328/
64obj-$(CONFIG_ROCKCHIP_RK3368) += rk3368/
65obj-$(CONFIG_ROCKCHIP_RK3399) += rk3399/
66obj-$(CONFIG_ROCKCHIP_RV1108) += rv1108/
67
68# Clear out SPL objects, in case this is a TPL build
69obj-spl-$(CONFIG_TPL_BUILD) =
70
71# Now add SPL/TPL objects back into the main build
72obj-$(CONFIG_SPL_BUILD) += $(obj-spl-y)
73obj-$(CONFIG_TPL_BUILD) += $(obj-tpl-y)
74