xref: /rk3399_rockchip-uboot/arch/arm/mach-rockchip/Makefile (revision 2f6c020d95ebda22b28d3a31f574ec547a9281fb) 
1#
2# Copyright (c) 2014 Google, Inc
3#
4# SPDX-License-Identifier:	GPL-2.0+
5#
6
7# We don't want the bootrom-helper present in a full U-Boot build, as
8# this may have entered from ATF with the stack-pointer pointing to
9# inaccessible/protected memory (and the bootrom-helper assumes that
10# the stack-pointer is valid before switching to the U-Boot stack).
11obj-spl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o
12obj-tpl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o
13
14obj-tpl-y += tpl.o
15ifndef CONFIG_SPL_DECOMP_HEADER
16obj-spl-y += spl.o spl-boot-order.o
17endif
18
19ifndef CONFIG_TPL_BUILD
20obj-$(CONFIG_$(SPL_)FIT) += fit_misc.o
21ifdef CONFIG_SPL_BUILD
22obj-y += spl_boot_mode.o
23obj-$(CONFIG_ROCKCHIP_META) += rk_meta.o
24obj-$(CONFIG_SPL_ROCKCHIP_HWID_DTB) += rk_hwid.o
25endif
26endif
27
28ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
29
30# Always include boot_mode.o, as we bypass it (i.e. turn it off)
31# inside of boot_mode.c when CONFIG_BOOT_MODE_REG is 0.  This way,
32# we can have the preprocessor correctly recognise both 0x0 and 0
33# meaning "turn it off".
34
35obj-y += chip_info.o
36ifndef CONFIG_SUPPORT_USBPLUG
37obj-y += lowlevel_init.o
38obj-y += boot_mode.o
39obj-y += boot_rkimg.o
40obj-y += board.o
41obj-y += iomem.o
42obj-y += memblk.o
43obj-$(CONFIG_ROCKCHIP_HOTKEY) += hotkey.o
44else
45obj-y += usbplug.o
46endif
47
48obj-$(CONFIG_USING_KERNEL_DTB) += kernel_dtb.o
49obj-$(CONFIG_ROCKCHIP_FIT_IMAGE) += fit.o
50obj-$(CONFIG_ROCKCHIP_UIMAGE) += uimage.o
51obj-$(CONFIG_ROCKCHIP_SMCCC) += rockchip_smccc.o
52obj-$(CONFIG_ROCKCHIP_VENDOR_PARTITION) += vendor.o vendor_misc.o
53obj-$(CONFIG_ROCKCHIP_RESOURCE_IMAGE) += resource_img.o
54obj-$(CONFIG_ROCKCHIP_HWID_DTB) += rk_hwid.o
55obj-$(CONFIG_ROCKCHIP_DEBUGGER) += rockchip_debugger.o
56endif
57
58obj-$(CONFIG_$(SPL_)FPGA_ROCKCHIP) += fpga.o
59obj-$(CONFIG_RAM) += param.o
60obj-$(CONFIG_$(SPL_TPL_)RAM) += sdram.o
61obj-$(CONFIG_SPL_KERNEL_BOOT) += spl_resource_img.o
62obj-$(CONFIG_SPL_PCIE_EP_SUPPORT) += spl_pcie_ep_boot.o
63
64obj-$(CONFIG_ROCKCHIP_PX30) += px30/
65obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036/
66obj-$(CONFIG_ROCKCHIP_RK3066) += rk3066/
67obj-$(CONFIG_ROCKCHIP_RK3128) += rk3128/
68ifndef CONFIG_TPL_BUILD
69obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188/
70endif
71obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x/
72obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288/
73obj-$(CONFIG_ROCKCHIP_RK3308) += rk3308/
74obj-$(CONFIG_ROCKCHIP_RK3328) += rk3328/
75obj-$(CONFIG_ROCKCHIP_RK3368) += rk3368/
76obj-$(CONFIG_ROCKCHIP_RK3399) += rk3399/
77obj-$(CONFIG_ROCKCHIP_RK3506) += rk3506/
78obj-$(CONFIG_ROCKCHIP_RK3528) += rk3528/
79obj-$(CONFIG_ROCKCHIP_RK3562) += rk3562/
80obj-$(CONFIG_ROCKCHIP_RK3568) += rk3568/
81obj-$(CONFIG_ROCKCHIP_RK3576) += rk3576/
82obj-$(CONFIG_ROCKCHIP_RK3588) += rk3588/
83obj-$(CONFIG_ROCKCHIP_RK1808) += rk1808/
84obj-$(CONFIG_ROCKCHIP_RV1103B) += rv1103b/
85obj-$(CONFIG_ROCKCHIP_RV1106) += rv1106/
86obj-$(CONFIG_ROCKCHIP_RV1108) += rv1108/
87obj-$(CONFIG_ROCKCHIP_RV1126) += rv1126/
88
89# Clear out SPL objects, in case this is a TPL build
90obj-spl-$(CONFIG_TPL_BUILD) =
91
92# Now add SPL/TPL objects back into the main build
93obj-$(CONFIG_SPL_BUILD) += $(obj-spl-y)
94obj-$(CONFIG_TPL_BUILD) += $(obj-tpl-y)
95
96obj-$(CONFIG_ROCKCHIP_PRELOADER_ATAGS) += rk_atags.o
97obj-$(CONFIG_SET_DFU_ALT_INFO) += dfu_alt_info.o
98obj-$(CONFIG_PSTORE) += pstore.o
99obj-$(CONFIG_ROCKCHIP_MINIDUMP) += rk_mini_dump.o
100
101