xref: /rk3399_rockchip-uboot/arch/arm/mach-rockchip/Makefile (revision 2a3fb7bb049d69d96f3bc7dae8caa756fdc8a613) 
1#
2# Copyright (c) 2014 Google, Inc
3#
4# SPDX-License-Identifier:	GPL-2.0+
5#
6
7# We don't want the bootrom-helper present in a full U-Boot build, as
8# this may have entered from ATF with the stack-pointer pointing to
9# inaccessible/protected memory (and the bootrom-helper assumes that
10# the stack-pointer is valid before switching to the U-Boot stack).
11obj-spl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o
12obj-tpl-$(CONFIG_ROCKCHIP_BROM_HELPER) += bootrom.o
13
14obj-tpl-y += tpl.o
15obj-spl-y += spl.o spl-boot-order.o
16
17ifndef CONFIG_TPL_BUILD
18obj-y += weak.o
19endif
20
21ifeq ($(CONFIG_SPL_BUILD)$(CONFIG_TPL_BUILD),)
22
23# Always include boot_mode.o, as we bypass it (i.e. turn it off)
24# inside of boot_mode.c when CONFIG_BOOT_MODE_REG is 0.  This way,
25# we can have the preprocessor correctly recognise both 0x0 and 0
26# meaning "turn it off".
27
28obj-y += chip_info.o
29ifndef CONFIG_SUPPORT_USBPLUG
30obj-y += boot_mode.o
31obj-y += boot_rkimg.o
32obj-y += board.o
33obj-y += iomem.o
34obj-y += memblk.o
35obj-y += hotkey.o
36else
37obj-y += usbplug.o
38endif
39
40obj-$(CONFIG_USING_KERNEL_DTB) += kernel_dtb.o
41obj-$(CONFIG_ROCKCHIP_FIT_IMAGE) += fit.o
42obj-$(CONFIG_ROCKCHIP_UIMAGE) += uimage.o
43obj-$(CONFIG_ROCKCHIP_SMCCC) += rockchip_smccc.o
44obj-$(CONFIG_ROCKCHIP_VENDOR_PARTITION) += vendor.o
45obj-$(CONFIG_ROCKCHIP_RESOURCE_IMAGE) += resource_img.o
46obj-$(CONFIG_ROCKCHIP_DEBUGGER) += rockchip_debugger.o
47endif
48
49obj-$(CONFIG_RAM) += param.o
50obj-$(CONFIG_$(SPL_TPL_)RAM) += sdram.o
51obj-$(CONFIG_SPL_KERNEL_BOOT) += spl_resource_img.o
52
53obj-$(CONFIG_ROCKCHIP_PX30) += px30/
54obj-$(CONFIG_ROCKCHIP_RK3036) += rk3036/
55obj-$(CONFIG_ROCKCHIP_RK3066) += rk3066/
56obj-$(CONFIG_ROCKCHIP_RK3128) += rk3128/
57ifndef CONFIG_TPL_BUILD
58obj-$(CONFIG_ROCKCHIP_RK3188) += rk3188/
59endif
60obj-$(CONFIG_ROCKCHIP_RK322X) += rk322x/
61obj-$(CONFIG_ROCKCHIP_RK3288) += rk3288/
62obj-$(CONFIG_ROCKCHIP_RK3308) += rk3308/
63obj-$(CONFIG_ROCKCHIP_RK3328) += rk3328/
64obj-$(CONFIG_ROCKCHIP_RK3368) += rk3368/
65obj-$(CONFIG_ROCKCHIP_RK3399) += rk3399/
66obj-$(CONFIG_ROCKCHIP_RK1808) += rk1808/
67obj-$(CONFIG_ROCKCHIP_RV1108) += rv1108/
68obj-$(CONFIG_ROCKCHIP_RV1126) += rv1126/
69
70# Clear out SPL objects, in case this is a TPL build
71obj-spl-$(CONFIG_TPL_BUILD) =
72
73# Now add SPL/TPL objects back into the main build
74obj-$(CONFIG_SPL_BUILD) += $(obj-spl-y)
75obj-$(CONFIG_TPL_BUILD) += $(obj-tpl-y)
76
77obj-$(CONFIG_ROCKCHIP_PRELOADER_ATAGS) += rk_atags.o
78