1if ARCH_ROCKCHIP 2 3config ROCKCHIP_PX30 4 bool "Support Rockchip PX30" 5 select ARM64 if !ARM64_BOOT_AARCH32 6 select GICV2 7 select ARM_SMCCC 8 select SUPPORT_SPL 9 select SUPPORT_TPL 10 select SPL if !ARM64_BOOT_AARCH32 11 select TPL if !ARM64_BOOT_AARCH32 12 select TPL_TINY_FRAMEWORK if TPL 13 14 imply SPL_SEPARATE_BSS 15 imply SPL_SERIAL_SUPPORT 16 imply TPL_SERIAL_SUPPORT 17 help 18 The Rockchip PX30 is a ARM-based SoC with a quad-core Cortex-A35 19 including NEON and GPU, Mali-400 graphics, several DDR3 options 20 and video codec support. Peripherals include Gigabit Ethernet, 21 USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs. 22 23if ROCKCHIP_PX30 24 25config TPL_LDSCRIPT 26 default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" 27 28config TPL_TEXT_BASE 29 default 0xff0e1000 30 31config TPL_MAX_SIZE 32 default 10240 33 34config ROCKCHIP_RK3326 35 bool "Support Rockchip RK3326 " 36 help 37 RK3326 can use most code from PX30, but at some situations we have 38 to distinguish between RK3326 and PX30, so this macro gives help. 39 It is usually selected in rk3326 board defconfig. 40endif 41 42config ROCKCHIP_RK3036 43 bool "Support Rockchip RK3036" 44 select CPU_V7 45 select SUPPORT_SPL 46 select SUPPORT_TPL 47 select SPL 48 select TPL 49 select BOARD_LATE_INIT 50 select ROCKCHIP_BROM_HELPER 51 select TPL_NEEDS_SEPARATE_TEXT_BASE if TPL 52 select TPL_NEEDS_SEPARATE_STACK if TPL 53 select ARM_SMCCC 54 help 55 The Rockchip RK3036 is a ARM-based SoC with a dual-core Cortex-A7 56 including NEON and GPU, Mali-400 graphics, several DDR3 options 57 and video codec support. Peripherals include Gigabit Ethernet, 58 USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs. 59 60config ROCKCHIP_RK3128 61 bool "Support Rockchip RK3128" 62 select CPU_V7 63 select GICV2 64 select ARM_SMCCC 65 help 66 The Rockchip RK3128 is a ARM-based SoC with a quad-core Cortex-A7 67 including NEON and GPU, Mali-400 graphics, several DDR3 options 68 and video codec support. Peripherals include Gigabit Ethernet, 69 USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs. 70 71if ROCKCHIP_RK3128 72 73config ROCKCHIP_RK3126 74 bool "Support Rockchip RK3126 " 75 help 76 RK3126 can use most code from RK3128, but at some situations we have 77 to distinguish between RK3126 and RK3128, so this macro gives help. 78 It is usually selected in rk3126 board defconfig. 79 80config ROCKCHIP_PX3SE 81 bool "Support Rockchip PX3SE" 82 help 83 PX3SE is a variant of RK3128, it shares codes with RK3128, but we still 84 need this macro to distinguish PX3SE and RK3128. 85endif 86 87config ROCKCHIP_RK3066 88 bool "Support Rockchip RK3066" 89 select CPU_V7 90 select SUPPORT_SPL 91 select SUPPORT_TPL 92 select SPL 93 select TPL 94 select BOARD_LATE_INIT 95 select ROCKCHIP_BROM_HELPER 96 select SPL_ROCKCHIP_EARLYRETURN_TO_BROM 97 help 98 The Rockchip RK3066 is a ARM-based SoC with a dual-core Cortex-A9 99 including NEON and GPU, Mali-400 graphics, several DDR3 options 100 and video codec support. Peripherals include ethernet, USB2 host 101 and OTG, SDIO, I2S, UART, SPI, I2C and PWMs. 102 103config ROCKCHIP_RK3188 104 bool "Support Rockchip RK3188" 105 select CPU_V7 106 select SPL_BOARD_INIT if SPL 107 select SUPPORT_SPL 108 select SPL 109 select SPL_CLK 110 select SPL_REGMAP 111 select SPL_SYSCON 112 select SPL_RAM 113 select SPL_DRIVERS_MISC_SUPPORT 114 select SPL_ROCKCHIP_EARLYRETURN_TO_BROM 115 select BOARD_LATE_INIT 116 select ROCKCHIP_BROM_HELPER 117 help 118 The Rockchip RK3188 is a ARM-based SoC with a quad-core Cortex-A9 119 including NEON and GPU, 512KB L2 cache, Mali-400 graphics, two 120 video interfaces, several memory options and video codec support. 121 Peripherals include Fast Ethernet, USB2 host and OTG, SDIO, I2S, 122 UART, SPI, I2C and PWMs. 123 124config ROCKCHIP_RK322X 125 bool "Support Rockchip RK3228/RK3229" 126 select CPU_V7 127 select SUPPORT_SPL 128 select SUPPORT_TPL 129 select SPL 130 select TPL 131 select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL 132 select TPL_NEEDS_SEPARATE_STACK if TPL 133 select SPL_DRIVERS_MISC_SUPPORT 134 imply SPL_SERIAL_SUPPORT 135 imply TPL_SERIAL_SUPPORT 136 select ROCKCHIP_BROM_HELPER 137 select TPL_LIBCOMMON_SUPPORT 138 select TPL_LIBGENERIC_SUPPORT 139 select GICV2 140 select ARM_SMCCC 141 help 142 The Rockchip RK3229 is a ARM-based SoC with a dual-core Cortex-A7 143 including NEON and GPU, Mali-400 graphics, several DDR3 options 144 and video codec support. Peripherals include Gigabit Ethernet, 145 USB2 host and OTG, SDIO, I2S, UART, SPI, I2C and PWMs. 146 147if ROCKCHIP_RK322X 148 149config ROCKCHIP_RK3128X 150 bool "Support Rockchip RK3128X " 151 help 152 RK3128X can use most code from RK322X, but at some situations we have 153 to distinguish between RK3128X and RK322X, so this macro gives help. 154 It is usually selected in RK3128X board defconfig. 155endif 156 157config ROCKCHIP_RK3288 158 bool "Support Rockchip RK3288" 159 select CPU_V7 160 select SPL_BOARD_INIT if SPL 161 select SUPPORT_SPL 162 select SUPPORT_TPL 163 select SPL 164 select TPL 165 select TPL_NEEDS_SEPARATE_TEXT_BASE if TPL 166 select TPL_NEEDS_SEPARATE_STACK if TPL 167 imply TPL_SERIAL_SUPPORT 168 select GICV2 169 select ARM_SMCCC 170 select SPL_OPTEE 171 select FIT 172 select SPL_LOAD_FIT 173 select TPL_LIBCOMMON_SUPPORT 174 select TPL_LIBGENERIC_SUPPORT 175 select TPL_SYS_MALLOC_SIMPLE 176 select TPL_BOOTROM_SUPPORT 177 select TPL_DRIVERS_MISC_SUPPORT 178 select TPL_OF_CONTROL 179 select TPL_DM 180 select TPL_REGMAP 181 select TPL_SYSCON 182 select TPL_RAM 183 select TPL_CLK 184 select TPL_TINY_MEMSET 185 help 186 The Rockchip RK3288 is a ARM-based SoC with a quad-core Cortex-A17 187 including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two 188 video interfaces supporting HDMI and eDP, several DDR3 options 189 and video codec support. Peripherals include Gigabit Ethernet, 190 USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs. 191 192if ROCKCHIP_RK3288 193config SPL_FIT_GENERATOR 194 default "arch/arm/mach-rockchip/make_fit_optee.sh" 195 196config TPL_LDSCRIPT 197 default "arch/arm/mach-rockchip/u-boot-tpl.lds" 198 199config TPL_TEXT_BASE 200 default 0xff704000 201 202config TPL_MAX_SIZE 203 default 32768 204 205config TPL_STACK 206 default 0xff718000 207 208endif 209 210config ROCKCHIP_RK3308 211 bool "Support Rockchip RK3308" 212 select ARM64 if !ARM64_BOOT_AARCH32 213 select ARM_SMCCC 214 imply GICV2 215 select SUPPORT_SPL if !ARM64_BOOT_AARCH32 216 select SUPPORT_TPL if !ARM64_BOOT_AARCH32 217 select SPL if !ARM64_BOOT_AARCH32 218 select TPL if !ARM64_BOOT_AARCH32 219 imply SPL_CLK 220 imply SPL_REGMAP 221 imply SPL_SYSCON 222 imply SPL_RAM 223 imply SPL_SERIAL_SUPPORT 224 imply TPL_SERIAL_SUPPORT 225 imply SPL_SEPARATE_BSS 226 help 227 The Rockchip RK3308 is a ARM-based Soc which embeded with quad 228 Cortex-A35 and highly integrated audio interfaces. 229 230if ROCKCHIP_RK3308 231 232config TPL_LDSCRIPT 233 default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" 234 235config TPL_TEXT_BASE 236 default 0xfff81000 237 238config TPL_MAX_SIZE 239 default 10240 240 241config TPL_STACK 242 default 0xfff84000 243 244endif 245 246config ROCKCHIP_RK3328 247 bool "Support Rockchip RK3328" 248 select ARM64 249 select GICV2 250 select SUPPORT_SPL 251 select SUPPORT_TPL 252 select SPL 253 select TPL 254 select TPL_NEEDS_SEPARATE_TEXT_BASE if TPL 255 select TPL_NEEDS_SEPARATE_STACK if TPL 256 imply SPL_SERIAL_SUPPORT 257 imply TPL_SERIAL_SUPPORT 258 imply SPL_SEPARATE_BSS 259 select ARM_SMCCC 260 help 261 The Rockchip RK3328 is a ARM-based SoC with a quad-core Cortex-A53. 262 including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two 263 video interfaces supporting HDMI and eDP, several DDR3 options 264 and video codec support. Peripherals include Gigabit Ethernet, 265 USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs. 266 267if ROCKCHIP_RK3328 268 269config TPL_LDSCRIPT 270 default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" 271 272config TPL_TEXT_BASE 273 default 0xff091000 274 275config TPL_MAX_SIZE 276 default 28672 277 278config TPL_STACK 279 default 0xff098000 280 281endif 282 283config ROCKCHIP_RK3368 284 bool "Support Rockchip RK3368" 285 select ARM64 286 select SUPPORT_SPL 287 select SUPPORT_TPL 288 select TPL_NEEDS_SEPARATE_TEXT_BASE if SPL 289 select TPL_NEEDS_SEPARATE_STACK if TPL 290 imply SPL_SEPARATE_BSS 291 imply SPL_SERIAL_SUPPORT 292 imply TPL_SERIAL_SUPPORT 293 select GICV2 294 select ARM_SMCCC 295 help 296 The Rockchip RK3368 is a ARM-based SoC with a octa-core (organised 297 into a big and little cluster with 4 cores each) Cortex-A53 including 298 AdvSIMD, 512KB L2 cache (for the big cluster) and 256 KB L2 cache 299 (for the little cluster), PowerVR G6110 based graphics, one video 300 output processor supporting LVDS/HDMI/eDP, several DDR3 options and 301 video codec support. 302 303 On-chip peripherals include Gigabit Ethernet, USB2 host and OTG, SDIO, 304 I2S, UARTs, SPI, I2C and PWMs. 305 306if ROCKCHIP_RK3368 307 308config ROCKCHIP_PX5 309 bool "Support Rockchip PX5" 310 help 311 PX5 is a variant of RK3368, it shares codes with RK3368, but we still 312 need this macro to distinguish PX5 and RK3368. 313 314config TPL_LDSCRIPT 315 default "arch/arm/mach-rockchip/rk3368/u-boot-tpl.lds" 316 317config TPL_TEXT_BASE 318 default 0xff8c1000 319 320config TPL_MAX_SIZE 321 default 28672 322 323config TPL_STACK 324 default 0xff8cffff 325 326endif 327 328config ROCKCHIP_RK3399 329 bool "Support Rockchip RK3399" 330 select ARM64 331 select SUPPORT_SPL 332 select SUPPORT_TPL 333 select SPL 334 select TPL 335 select TPL_NEEDS_SEPARATE_TEXT_BASE if TPL 336 select TPL_NEEDS_SEPARATE_STACK if TPL 337 imply TPL_SERIAL_SUPPORT 338 select SPL_SEPARATE_BSS 339 select SPL_SERIAL_SUPPORT 340 select SPL_DRIVERS_MISC_SUPPORT 341 select GICV3 342 select BOARD_LATE_INIT 343 select ROCKCHIP_BROM_HELPER 344 select ARM_SMCCC 345 select TPL_LIBCOMMON_SUPPORT 346 select TPL_LIBGENERIC_SUPPORT 347 select TPL_SYS_MALLOC_SIMPLE 348 select TPL_BOOTROM_SUPPORT 349 select TPL_DRIVERS_MISC_SUPPORT 350 select TPL_OF_CONTROL 351 select TPL_DM 352 select TPL_REGMAP 353 select TPL_SYSCON 354 select TPL_RAM 355 select TPL_CLK 356 select TPL_TINY_MEMSET 357 help 358 The Rockchip RK3399 is a ARM-based SoC with a dual-core Cortex-A72 359 and quad-core Cortex-A53. 360 including NEON and GPU, 1MB L2 cache, Mali-T7 graphics, two 361 video interfaces supporting HDMI and eDP, several DDR3 options 362 and video codec support. Peripherals include Gigabit Ethernet, 363 USB2 host and OTG, SDIO, I2S, UARTs, SPI, I2C and PWMs. 364 365if ROCKCHIP_RK3399 366 367config ROCKCHIP_RK3399PRO 368 bool "Support Rockchip RK3399Pro" 369 370config TPL_LDSCRIPT 371 default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" 372 373config TPL_TEXT_BASE 374 default 0xff8c2000 375 376config TPL_MAX_SIZE 377 default 188416 378 379config TPL_STACK 380 default 0xff8effff 381 382endif 383 384config ROCKCHIP_RK3528 385 bool "Support Rockchip RK3528" 386 select ARM64 if !ARM64_BOOT_AARCH32 387 select GICV2 if !ARM64_BOOT_AARCH32 388 select SUPPORT_TPL if !ARM64_BOOT_AARCH32 389 select SUPPORT_SPL if !ARM64_BOOT_AARCH32 390 select TPL_TINY_FRAMEWORK if TPL 391 select DEBUG_UART_BOARD_INIT 392 imply TPL if !ARM64_BOOT_AARCH32 393 imply SPL if !ARM64_BOOT_AARCH32 394 imply TPL_SERIAL_SUPPORT 395 help 396 The Rockchip RK3528 is a ARM-based SoC with a quad-core Cortex-A53. 397 398if ROCKCHIP_RK3528 399 400config TPL_LDSCRIPT 401 default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" 402 403config TPL_TEXT_BASE 404 default 0xfe481000 405 406config TPL_MAX_SIZE 407 default 61440 408 409endif 410 411config ROCKCHIP_RK3562 412 bool "Support Rockchip RK3562" 413 select GICV2 414 select ARM64 415 select ARM_SMCCC 416 select SUPPORT_TPL 417 select SUPPORT_SPL 418 select TPL_TINY_FRAMEWORK if TPL 419 select DEBUG_UART_BOARD_INIT 420 imply TPL 421 imply SPL 422 imply TPL_SERIAL_SUPPORT 423 help 424 The Rockchip RK3562 is a ARM-based SoC with a quad-core Cortex-A53. 425 426if ROCKCHIP_RK3562 427 428config TPL_LDSCRIPT 429 default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" 430 431config TPL_TEXT_BASE 432 default 0xfe481000 433 434config TPL_MAX_SIZE 435 default 61440 436 437endif 438 439config ROCKCHIP_RK3568 440 bool "Support Rockchip RK3568" 441 select ARM64 if !ARM64_BOOT_AARCH32 442 select ARM_SMCCC 443 select GICV3 if !ARM64_BOOT_AARCH32 && !SUPPORT_USBPLUG 444 select SUPPORT_TPL if !ARM64_BOOT_AARCH32 445 select SUPPORT_SPL if !ARM64_BOOT_AARCH32 446 select TPL_TINY_FRAMEWORK if TPL 447 select DEBUG_UART_BOARD_INIT 448 imply TPL if !ARM64_BOOT_AARCH32 449 imply SPL if !ARM64_BOOT_AARCH32 450 imply TPL_SERIAL_SUPPORT 451 help 452 The Rockchip RK3568 is a ARM-based SoC with a quad-core Cortex-A55. 453 454if ROCKCHIP_RK3568 455 456config TPL_LDSCRIPT 457 default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" 458 459config TPL_TEXT_BASE 460 default 0xfdcc1000 461 462config TPL_MAX_SIZE 463 default 61440 464 465endif 466 467config ROCKCHIP_RK3576 468 bool "Support Rockchip RK3576" 469 select ARM64 470 select GICV2 471 select ARM_SMCCC 472 select DEBUG_UART_BOARD_INIT 473 select ROCKCHIP_BROM_HELPER 474 select SUPPORT_SPL 475 select SUPPORT_TPL 476 select TPL_TINY_FRAMEWORK if TPL 477 imply TPL 478 imply SPL 479 imply TPL_SERIAL_SUPPORT 480 481 help 482 The Rockchip RK3576 is a ARM-based SoC with a quad-core Cortex-A53 483 and a quad-core Cortex-A72. 484 485if ROCKCHIP_RK3576 486 487config TPL_LDSCRIPT 488 default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" 489 490config TPL_TEXT_BASE 491 default 0x3ff81000 492 493config TPL_MAX_SIZE 494 default 61440 495 496endif 497 498config ROCKCHIP_RK3588 499 bool "Support Rockchip RK3588" 500 select ARM64 if !ARM64_BOOT_AARCH32 501 select ARM_SMCCC 502 select DEBUG_UART_BOARD_INIT 503 select GICV3 if !ARM64_BOOT_AARCH32 && !SUPPORT_USBPLUG 504 select ROCKCHIP_BROM_HELPER 505 select SUPPORT_SPL if !ARM64_BOOT_AARCH32 506 select SUPPORT_TPL if !ARM64_BOOT_AARCH32 507 select TPL_TINY_FRAMEWORK if TPL 508 imply TPL if !ARM64_BOOT_AARCH32 509 imply SPL if !ARM64_BOOT_AARCH32 510 imply TPL_SERIAL_SUPPORT 511 select DEBUG_UART_BOARD_INIT 512 help 513 The Rockchip RK3588 is a ARM-based SoC with a quad-core Cortex-A55. 514 515if ROCKCHIP_RK3588 516 517config TPL_LDSCRIPT 518 default "arch/arm/mach-rockchip/u-boot-tpl-v8.lds" 519 520config TPL_TEXT_BASE 521 default 0xff001000 522 523config TPL_MAX_SIZE 524 default 61440 525endif 526 527config ROCKCHIP_RK1808 528 bool "Support Rockchip RK1808" 529 select ARM64 530 select ARM_SMCCC 531 select GICV3 if !COPROCESSOR_RK1808 532 select SUPPORT_SPL if !COPROCESSOR_RK1808 533 select SUPPORT_TPL if !COPROCESSOR_RK1808 534 help 535 The Rockchip RK1808 is a ARM-based Soc which embedded with dual 536 Cortex-A35. 537 538if ROCKCHIP_RK1808 539 540config ROCKCHIP_RK1806 541 bool "Support Rockchip RK1806" 542 help 543 The Rockchip RK1806 is a ARM-based Soc which embedded with dual 544 Cortex-A35. 545 546config COPROCESSOR_RK1808 547 bool "RK1808 coprocessor" 548 help 549 This indicates the RK1808 is working as a coprocessor for another 550 more powerful SoC. 551 552endif 553 554config ROCKCHIP_RV1106 555 bool "Support Rockchip RV1106" 556 select CPU_V7 557 select DEBUG_UART_BOARD_INIT 558 imply SUPPORT_SPL 559 imply SUPPORT_TPL 560 imply SPL 561 imply TPL 562 imply TPL_SERIAL_SUPPORT 563 imply TPL_TINY_FRAMEWORK if TPL 564 imply BOARD_LATE_INIT 565 imply ROCKCHIP_GPIO_V2 566 help 567 The Rockchip RV1106 is a ARM-based SoC with a Cortex-A7 and 568 other modules. 569 570if ROCKCHIP_RV1106 571 572config TPL_LDSCRIPT 573 default "arch/arm/mach-rockchip/u-boot-tpl.lds" 574 575config TPL_TEXT_BASE 576 default 0xff701000 577 578config TPL_MAX_SIZE 579 default 32768 580endif 581 582config ROCKCHIP_RV1108 583 bool "Support Rockchip RV1108" 584 select CPU_V7 585 select SUPPORT_SPL 586 select SUPPORT_TPL 587 select SPL 588 select TPL 589 select BOARD_LATE_INIT 590 help 591 The Rockchip RV1108 is a ARM-based SoC with a single-core Cortex-A7 592 and a DSP. 593 594if ROCKCHIP_RV1108 595 596config TPL_LDSCRIPT 597 default "arch/arm/mach-rockchip/u-boot-tpl.lds" 598 599config TPL_TEXT_BASE 600 default 0x10080800 601 602config TPL_MAX_SIZE 603 default 6144 604 605config TPL_STACK 606 default 0x10082000 607 608endif 609 610config ROCKCHIP_RV1126 611 bool "Support Rockchip RV1126" 612 select CPU_V7 613 imply SUPPORT_TPL 614 imply SUPPORT_SPL 615 imply TPL_TINY_FRAMEWORK if TPL 616 select DEBUG_UART_BOARD_INIT 617 imply TPL 618 imply SPL 619 imply GICV2 620 imply ARM_SMCCC 621 imply BOARD_LATE_INIT 622 imply ROCKCHIP_GPIO_V2 623 imply TPL_SERIAL_SUPPORT 624 help 625 The Rockchip RV1126 is a ARM-based SoC with a quad-core Cortex-A7 626 and a risc-v core. 627 628if ROCKCHIP_RV1126 629 630config TPL_LDSCRIPT 631 default "arch/arm/mach-rockchip/u-boot-tpl.lds" 632 633config TPL_TEXT_BASE 634 default 0xff701000 635 636config TPL_MAX_SIZE 637 default 32768 638endif 639 640config SPL_ROCKCHIP_BACK_TO_BROM 641 bool "SPL returns to bootrom" 642 default y if ROCKCHIP_RK3036 643 select ROCKCHIP_BROM_HELPER 644 depends on SPL 645 help 646 Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled, 647 SPL will return to the boot rom, which will then load the U-Boot 648 binary to keep going on. 649 650config TPL_ROCKCHIP_BACK_TO_BROM 651 bool "TPL returns to bootrom" 652 default y 653 select ROCKCHIP_BROM_HELPER 654 depends on TPL 655 help 656 Rockchip SoCs have ability to load SPL & U-Boot binary. If enabled, 657 SPL will return to the boot rom, which will then load the U-Boot 658 binary to keep going on. 659 660config ARM64_BOOT_AARCH32 661 bool "Support Boot an ARM64 on AArch32 execution state, ie. U-Boot is in AArch32" 662 select CPU_V7 663 default n 664 help 665 If you want to boot an ARM64 processor on 32-bit mode, say y here. 666 667config ARM64_SWITCH_TO_AARCH32 668 bool "Support AArch64 U-Boot boot AArch32 kernel" 669 default n 670 help 671 If you want AArch64 U-Boot to boot AArch32 kernel, say y here. 672 This feature needs ATF to help switch the PE state. 673 674config ROCKCHIP_BOOT_MODE_REG 675 hex "Rockchip boot mode flag register address" 676 default 0xff010200 if ROCKCHIP_PX30 677 default 0x200081c8 if ROCKCHIP_RK3036 678 default 0x100a0038 if ROCKCHIP_RK3128 679 default 0x20004040 if ROCKCHIP_RK3188 680 default 0x110005c8 if ROCKCHIP_RK322X 681 default 0xff730094 if ROCKCHIP_RK3288 682 default 0xff000500 if ROCKCHIP_RK3308 683 default 0xff1005c8 if ROCKCHIP_RK3328 684 default 0xff738200 if ROCKCHIP_RK3368 685 default 0xff320300 if ROCKCHIP_RK3399 686 default 0xff370200 if ROCKCHIP_RK3528 687 default 0xff010220 if ROCKCHIP_RK3562 688 default 0xfdc20200 if ROCKCHIP_RK3568 689 default 0x26024040 if ROCKCHIP_RK3576 690 default 0xfd588080 if ROCKCHIP_RK3588 691 default 0xfe020200 if ROCKCHIP_RK1808 692 default 0xff020200 if ROCKCHIP_RV1106 693 default 0x10300580 if ROCKCHIP_RV1108 694 default 0xfe020200 if ROCKCHIP_RV1126 695 default 0 696 help 697 The Soc will enter to different boot mode(defined in asm/arch/boot_mode.h) 698 according to the value from this register. 699 700config ROCKCHIP_STIMER_BASE 701 hex "Rockchip Secure timer base address" 702 default 0xff220020 if ROCKCHIP_PX30 703 default 0x200440a0 if ROCKCHIP_RK3036 704 default 0x2000e000 if ROCKCHIP_RK3066 705 default 0x20018020 if ROCKCHIP_RK3126 706 default 0x200440a0 if ROCKCHIP_RK3128 707 default 0x2000e000 if ROCKCHIP_RK3188 708 default 0x110d0020 if ROCKCHIP_RK322X 709 default 0xff810020 if ROCKCHIP_RK3288 710 default 0xff1b00a0 if ROCKCHIP_RK3308 711 default 0xff1d0020 if ROCKCHIP_RK3328 712 default 0xff830020 if ROCKCHIP_RK3368 713 default 0xff8680a0 if ROCKCHIP_RK3399 714 default 0xff620000 if ROCKCHIP_RK3528 715 default 0xffa90020 if ROCKCHIP_RK3562 716 default 0xfdd1c020 if ROCKCHIP_RK3568 717 default 0x27400000 if ROCKCHIP_RK3576 718 default 0xfd8c8000 if ROCKCHIP_RK3588 719 default 0xff590020 if ROCKCHIP_RV1106 720 default 0x10350020 if ROCKCHIP_RV1108 721 default 0xff670020 if ROCKCHIP_RV1126 722 default 0 723 help 724 The secure timer inited in SPL/TPL in secure word, ARM generic timer 725 works after this timer work. 726 727config ROCKCHIP_IRAM_START_ADDR 728 hex "Rockchip Secure timer base address" 729 default 0xff0e0000 if ROCKCHIP_PX30 730 default 0x10080000 if ROCKCHIP_RK3036 731 default 0x10080000 if ROCKCHIP_RK3128 732 default 0x10080000 if ROCKCHIP_RK3188 733 default 0x10080000 if ROCKCHIP_RK322X 734 default 0xff700000 if ROCKCHIP_RK3288 735 default 0xfff80000 if ROCKCHIP_RK3308 736 default 0xff091000 if ROCKCHIP_RK3328 737 default 0xff8c0000 if ROCKCHIP_RK3368 738 default 0xff8c0000 if ROCKCHIP_RK3399 739 default 0xfe480000 if ROCKCHIP_RK3528 740 default 0xfe480000 if ROCKCHIP_RK3562 741 default 0xfdcc0000 if ROCKCHIP_RK3568 742 default 0x3ff80000 if ROCKCHIP_RK3576 743 default 0xff000000 if ROCKCHIP_RK3588 744 default 0xff6c0000 if ROCKCHIP_RV1106 745 default 0x10080000 if ROCKCHIP_RV1108 746 default 0xff700000 if ROCKCHIP_RV1126 747 default 0 748 help 749 The IRAM start addr is to locate variant of the boot device from 750 bootrom. 751 752config ROCKCHIP_SPL_RESERVE_IRAM 753 hex "Size of IRAM reserved in SPL" 754 default 0 755 help 756 SPL may need reserve memory for firmware loaded by SPL, whose load 757 address is in IRAM and may overlay with SPL text area if not 758 reserved. 759 760config ROCKCHIP_BROM_HELPER 761 bool 762 763config SPL_ROCKCHIP_EARLYRETURN_TO_BROM 764 bool "SPL requires early-return (for RK3188-style BROM) to BROM" 765 depends on SPL && ENABLE_ARM_SOC_BOOT0_HOOK 766 help 767 Some Rockchip BROM variants (e.g. on the RK3188) load the 768 first stage in segments and enter multiple times. E.g. on 769 the RK3188, the first 1KB of the first stage are loaded 770 first and entered; after returning to the BROM, the 771 remainder of the first stage is loaded, but the BROM 772 re-enters at the same address/to the same code as previously. 773 774 This enables support code in the BOOT0 hook for the SPL stage 775 to allow multiple entries. 776 777config TPL_ROCKCHIP_EARLYRETURN_TO_BROM 778 bool "TPL requires early-return (for RK3188-style BROM) to BROM" 779 depends on TPL && ENABLE_ARM_SOC_BOOT0_HOOK 780 help 781 Some Rockchip BROM variants (e.g. on the RK3188) load the 782 first stage in segments and enter multiple times. E.g. on 783 the RK3188, the first 1KB of the first stage are loaded 784 first and entered; after returning to the BROM, the 785 remainder of the first stage is loaded, but the BROM 786 re-enters at the same address/to the same code as previously. 787 788 This enables support code in the BOOT0 hook for the TPL stage 789 to allow multiple entries. 790 791config SPL_MMC_SUPPORT 792 default y if !SPL_ROCKCHIP_BACK_TO_BROM && MMC 793 794config RKIMG_BOOTLOADER 795 bool "Support for Rockchip platform features" 796 default y 797 help 798 Actually this is a compatible configure for code compilation. 799 800config RKIMG_ANDROID_BOOTMODE_LEGACY 801 bool "Support set androidboot.mode with legacy rule" 802 depends on RKIMG_BOOTLOADER 803 default n 804 help 805 Rockchip set "androidboot.mode=" as "charger" or boot media for android, 806 which is a rockchip private solution(SDK < 8.1) and deprecated. 807 808config ROCKCHIP_BOOTDEV 809 string "Set the boot device for multiple storage board" 810 default "" 811 help 812 On the multiple storage on board, set this to determine what we really 813 want to be the boot device, which contains kernel, rootfs and etc. 814 Fall through to get from preloader or scan list when it's NULL. 815 816config ROCKCHIP_RESOURCE_IMAGE 817 bool "Enable support for rockchip resource image" 818 depends on RKIMG_BOOTLOADER 819 default y 820 help 821 This enables support to get dtb or logo files from 822 rockchip resource image format partition. 823 824config ROCKCHIP_DTB_VERIFY 825 bool "Enable hash verify for DTB in the resource file" 826 depends on ROCKCHIP_RESOURCE_IMAGE 827 select SHA1 if !DM_CRYPTO 828 select SHA256 if !DM_CRYPTO 829 default y 830 help 831 This enables the hash verify for DTB in the resource file, it means we 832 always read DTB from second position even the DTB position is present. 833 834config ROCKCHIP_USB_BOOT 835 bool "Enable support for rockchip U-disk boot" 836 depends on USB 837 default n 838 help 839 This enables support for rockchip U-disk boot. 840 841config ROCKCHIP_FIT_IMAGE 842 bool "Enable support for FIT image" 843 depends on FIT 844 select CMD_BOOT_FIT 845 default n 846 help 847 This enables loading dtb from fit image. 848 849config ROCKCHIP_UIMAGE 850 bool "Enable support for legacy uImage" 851 depends on !FIT_SIGNATURE && USING_KERNEL_DTB 852 select CMD_BOOT_UIMAGE 853 default n 854 help 855 This enables loading dtb from uImage image. 856 857config ROCKCHIP_EARLY_DISTRO_DTB 858 bool "Enable support for distro dtb early" 859 depends on DISTRO_DEFAULTS && USING_KERNEL_DTB && CMD_FS_GENERIC 860 default n 861 help 862 This enables loading dtb from distro bootable partition when there 863 is no valid dtb in android boot.img and rockchip resource.img. 864 865if ROCKCHIP_EARLY_DISTRO_DTB 866 867config ROCKCHIP_EARLY_DISTRO_DTB_PATH 868 string "/rk-kernel.dtb" 869 help 870 "DTB file path in the bootable partition image" 871endif 872 873config ROCKCHIP_HWID_DTB 874 bool "Enable support for selecting DTB by hardware id" 875 depends on ROCKCHIP_RESOURCE_IMAGE 876 default n 877 help 878 This enables select the expected DTB from sets by hardware id, 879 i.e. GPIO or ADC value. 880 881config ROCKCHIP_VENDOR_PARTITION 882 bool "Rockchip vendor storage partition support" 883 depends on (RKIMG_BOOTLOADER || SUPPORT_USBPLUG) 884 help 885 This enable support to read/write vendor configuration data from/to 886 this partition. 887 888config USING_KERNEL_DTB 889 bool "Using dtb from Kernel/resource for U-Boot" 890 depends on RKIMG_BOOTLOADER && OF_LIVE 891 default y 892 help 893 This enable support to read dtb from resource and use it for U-Boot, 894 the uart and emmc will still using U-Boot dtb, but other devices like 895 regulator/pmic, display, usb will use dts node from kernel. 896 897config USING_KERNEL_DTB_V2 898 bool "Version 2 of kernel dtb mechanism" 899 depends on USING_KERNEL_DTB 900 default n 901 help 902 The V2 mechanism: 903 - both of U-Boot and kernel's *ALL* devices are exist in dm tree. 904 - put the necessary U-Boot devices in the head of device uclass list. 905 - the both existence policy don't require phandle fixup any more. 906 - it is for the next generation(rk3588 ...) or necessary platforms. 907 The V1 mechanism(legacy): 908 - U-Boot: only some necessary U-Boot devices(storage, crypto...) in dm tree. 909 - kernel: all the devices(except the U-Boot only) in dm tree. 910 911config EMBED_KERNEL_DTB 912 bool "Enable embedded dtb support" 913 default n 914 help 915 Enable embedded dtb support. 916 917config EMBED_KERNEL_DTB_PATH 918 string "Embedded kernel dtb file path" 919 depends on EMBED_KERNEL_DTB && USING_KERNEL_DTB 920 default "dts/kern.dtb" 921 help 922 This file will auto be appended to the u-boot.bin. 923 924config EMBED_KERNEL_DTB_ALWAYS 925 bool "Always using embedded kernel dtb" 926 depends on EMBED_KERNEL_DTB && USING_KERNEL_DTB 927 default n 928 help 929 Allow fallback to always use a prepared kernel dtb even USING_KERNEL_DTB 930 is set. This makes U-Boot stage more stable but not flexible any more to 931 compatible different boards. 932 933config ROCKCHIP_CRC 934 bool "Rockchip CRC verify images" 935 help 936 This enable support Rockchip CRC verify images. It takes a lot of time, 937 so it is better only used for debug. 938 939config ROCKCHIP_SMCCC 940 bool "Rockchip SMCCC" 941 default y if ARM_SMCCC 942 help 943 This enable support for Rockchip SMC calls 944 945config ROCKCHIP_DEBUGGER 946 bool "Rockchip debugger" 947 depends on IRQ 948 help 949 This enable support for Rockchip debugger. Now we install a timer interrupt 950 and dump pt_regs when the timeout event trigger. This helps us to know cpu 951 state when system hang. 952 953config ROCKCHIP_CRASH_DUMP 954 bool "Rockchip crash dump registers" 955 help 956 This enable dump registers when system crash, the registers you would like 957 to dump can be added in show_regs(). 958 959config ROCKCHIP_PRELOADER_ATAGS 960 bool "Rockchip pre-loader atags" 961 default y if ARCH_ROCKCHIP 962 help 963 This enable support Rockchip atags among pre-loaders, i.e. ddr, miniloader, ATF, 964 tos, U-Boot, etc. It delivers boot and configure information, shared with pre-loaders 965 and finally ends with U-Boot. 966 967config ROCKCHIP_META 968 bool "Rockchip Meta" 969 depends on SPL_KERNEL_BOOT && SPL_LIBDISK_SUPPORT 970 help 971 This support to load Rockchip meta data which like isp parameter, peripheral 972 parameters, etc. 973 974config ROCKCHIP_PRELOADER_SERIAL 975 bool "Rockchip pre-loader serial" 976 default y if ROCKCHIP_PRELOADER_ATAGS 977 help 978 This enable U-Boot using pre-loader atags serial configure to initialize console. 979 It denpends on serial aliases to find pre-loader serial number. 980 981config ROCKCHIP_IMAGE_TINY 982 bool "Rockchip tiny Image generation" 983 default n 984 help 985 This enable tiny image generation 986 987config ROCKCHIP_FIT_IMAGE_PACK 988 bool "Rockchip fit image pack of U-Boot and TEE" 989 depends on ROCKCHIP_FIT_IMAGE 990 default n 991 help 992 This enable fit image pack of U-Boot and TEE, it's used for make.sh script. 993 994config ROCKCHIP_UART_MUX_SEL_M 995 int "UART mux select" 996 default 0 997 depends on TPL 998 help 999 This select uart multiplexer for debug uart iomux in board_debug_uart_init. 1000 1001config ROCKCHIP_REBOOT_TEST 1002 bool "Rockchip reboot stress test before kernel" 1003 default n 1004 help 1005 It's a reboot stress test before kernel stages. 1006 1007config ROCKCHIP_NEW_IDB 1008 bool "Rockchip new IDB header" 1009 default n 1010 help 1011 The new IDB header was introduced from RK356X. 1012 1013config ROCKCHIP_HOTKEY 1014 bool "Rockchip hotkey" 1015 default y 1016 help 1017 Define a lot of hotkeys for debug. 1018 1019config ROCKCHIP_CMD 1020 string "Rockchip specific command" 1021 default "" 1022 help 1023 It defines a command to be run when the key is pressed if assigned. 1024 String format: "cmd key". 1025 @cmd: any U-Boot cmd. 1026 @key: any key map id, '-' standard for ignore. 1027 e.g. "sd_update 115", 115 is KEY_VOLUMEUP. 1028 1029config GICV2 1030 bool "ARM GICv2" 1031 1032config GICV3 1033 bool "ARM GICv3" 1034 1035config ROCKCHIP_EMMC_IOMUX 1036 bool "ROCKCHIP EMMC IOMUX" 1037 default n 1038 help 1039 This enable U-Boot to config EMMC iomux. 1040 1041config ROCKCHIP_NAND_IOMUX 1042 bool "ROCKCHIP NAND IOMUX" 1043 default n 1044 help 1045 This enable U-Boot to config NAND iomux. 1046 1047config ROCKCHIP_SFC_IOMUX 1048 bool "ROCKCHIP SFC IOMUX" 1049 default n 1050 help 1051 This enable U-Boot to config SFC iomux. 1052 1053config ROCKCHIP_SET_SN 1054 bool "Rockchip set serial number" 1055 default y 1056 1057config ROCKCHIP_SET_ETHADDR 1058 bool "Rockchip set eth address" 1059 default y 1060 1061config BASE_DEFCONFIG 1062 string "Base defconfig of config fragment" 1063 default "" 1064 help 1065 Indicate the base defconfig of config fragment. 1066 1067config CHIP_NAME 1068 string "Chip label name" 1069 default "" 1070 1071config LOADER_INI 1072 string "Name of Loader ini file in rkbin repository" 1073 default "" 1074 help 1075 The ini file is used to pack loader image. 1076 1077config TRUST_INI 1078 string "Name of Trust ini file in rkbin repository" 1079 default "" 1080 help 1081 The ini file is used to pack trust image. 1082 1083if !ROCKCHIP_FIT_IMAGE_PACK 1084config UBOOT_SIZE_KB 1085 int "Per u-boot.bin Image size, unit: KB" 1086 default 1024 1087 1088config UBOOT_NUM 1089 int "Number of u-boot.bin image being packed into trust.img" 1090 default 4 1091 1092config TRUST_SIZE_KB 1093 int "Per trust Image size, unit: KB" 1094 default 2048 1095 1096config TRUST_NUM 1097 int "Number of trust image being packed into trust.img" 1098 default 2 1099 1100config TRUST_RSA_MODE 1101 int "RSA mode of trust.img on ARM64" 1102 default 2 1103 help 1104 The RSA mode for tools to pack, the mode id can be: 1105 0: none; 1: RSA-1024; 2: RSA-2048; 3: RSA-2048-pss. 1106 1107config TRUST_SHA_MODE 1108 int "SHA mode of trust.img on ARM64" 1109 default 3 1110 help 1111 The SHA mode for tools to pack, the mode id can be: 1112 0: none; 1: sha1; 2: sha256 RK big endian; 3: sha256 little endian. 1113endif 1114 1115config PSTORE 1116 bool "Print log to linux pstore buffer" 1117 default n 1118 help 1119 This enable Print uboot log to linux pstore buffer which address 1120 is default 0x110000 for most soc. 1121 1122config PERSISTENT_RAM_ADDR 1123 hex "Linux pstore buffer address" 1124 default 0x0 1125 depends on PSTORE 1126 help 1127 This select linux pstore buffer address for U-Boot. When value is 1128 0, U-Boot auto gets this address from preloader atags. 1129 1130config PERSISTENT_RAM_SIZE 1131 hex "Linux pstore buffer size" 1132 default 0x0 1133 depends on (PERSISTENT_RAM_ADDR != 0) 1134 help 1135 This select linux pstore buffer size for U-Boot, the value must be 1136 set if PERSISTENT_RAM_ADDR != 0. 1137 1138config ROCKCHIP_MINIDUMP 1139 bool "Minidump Save Linux Debug Data To Ram Elf" 1140 default n 1141 help 1142 This enable saving linux debug data to a reserved memory as a elf file. 1143 1144config ROCKCHIP_MINIDUMP_SMEM_BASE 1145 hex "The base of share memory between Uboot and Linux" 1146 default 0x1f0000 1147 depends on ROCKCHIP_MINIDUMP 1148 help 1149 This select the base address of share memory, which is behind PSTORE. 1150 1151config ROCKCHIP_MINIDUMP_MAX_ELF_SIZE 1152 hex "The max size of minidump elf" 1153 default 0x2000000 1154 depends on ROCKCHIP_MINIDUMP 1155 help 1156 This is used to judge the elf program size and section size. 1157 1158config ROCKCHIP_MINIDUMP_MAX_ENTRIES 1159 hex "The max entries of minidump region" 1160 default 0x200 1161 depends on ROCKCHIP_MINIDUMP 1162 help 1163 This sets the max entries of minidump region. 1164 1165source "arch/arm/mach-rockchip/px30/Kconfig" 1166source "arch/arm/mach-rockchip/rk3036/Kconfig" 1167source "arch/arm/mach-rockchip/rk3066/Kconfig" 1168source "arch/arm/mach-rockchip/rk3128/Kconfig" 1169source "arch/arm/mach-rockchip/rk3188/Kconfig" 1170source "arch/arm/mach-rockchip/rk322x/Kconfig" 1171source "arch/arm/mach-rockchip/rk3288/Kconfig" 1172source "arch/arm/mach-rockchip/rk3308/Kconfig" 1173source "arch/arm/mach-rockchip/rk3328/Kconfig" 1174source "arch/arm/mach-rockchip/rk3368/Kconfig" 1175source "arch/arm/mach-rockchip/rk3399/Kconfig" 1176source "arch/arm/mach-rockchip/rk3528/Kconfig" 1177source "arch/arm/mach-rockchip/rk3562/Kconfig" 1178source "arch/arm/mach-rockchip/rk3568/Kconfig" 1179source "arch/arm/mach-rockchip/rk3576/Kconfig" 1180source "arch/arm/mach-rockchip/rk3588/Kconfig" 1181source "arch/arm/mach-rockchip/rk1808/Kconfig" 1182source "arch/arm/mach-rockchip/rv1106/Kconfig" 1183source "arch/arm/mach-rockchip/rv1108/Kconfig" 1184source "arch/arm/mach-rockchip/rv1126/Kconfig" 1185 1186endif 1187